Where is the primary user setting stored in CM database?

Hi,
I am wondering where the primary user field is stored in the SCCM 2012 database. We are implementing new help desk software and are trying to associate the primary user field with the computer name in this Help desk software and I cannot find where that
is stored anywhere. Any help would be greatly appreciated.
Thanks

Have a look in vUsersPrimaryMachines
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Similar Messages

Where is the administrative user data stored?

Hi I am trying to implement a simple user management application
in an weblogic server (10.3.2).
The user data is stored in an oracle database and the SQLAuthenticator is configured correctly.
Everything works fine, the user gets authenticated, created and deleted.
But when I try to log in several times with the wrong password, the server locks me out.
I know that i can unlock the user via the console but my question is:
Where is this information stored so that i can reset it using my user management aplication?
Can anyone help me or is this a big weblogic secret?
Regards
Edmund

Can anyone help me or is this a big weblogic secret?
Why do u want to know it???
There are ways by which u can unlock the user programatically.. i dont think u can unlock it by modifying some files on WLS, not recommended either...
U can use the following Mbeans
weblogic.management.security.authentication.UserLockoutManagerMBean
weblogic.management.runtime.UserLockoutManagerRuntimeMBean
http://weblogic-wonders.com/weblogic/2010/07/25/userlockout-feature-of-weblogic-server/

Where is the BPEL Instance payload stored in soa database?

Hi all,
Given an instance id, I need to get the payload used to invoke the BPEL.
I searched in the soa database. Also I went through the bpel client apis. But I couldn't find any. Is there any table in the BPEL dehydration store that can give me the entire bpel instance input payload given the instance_id?
Thanks,
Shyamala

Hi,
have you tried to unzip the blob inside the xml_document table?
the dockey is availalbe via document_ci_ref

Where is the printer configuration info stored?

I need to configure printing for a whole lab, and while I can configure an individual machine for one user via the Print/Fax option of System prefs, I can't find where all that info gets stored (some of it is in ~/Library/Preferences/com.apple.PrintingPrefs.plist, but not all) and I can't figure out how to slide that in as a whole-system configuration. Where is the per-user information stored, and where can I move it so that it applies system-wide?

The printer queues are global so most of the information is not kept under any particular user. The path you mentioned keeps user relevant information, such as Presets.
If the printers are using files that are included with 10.5, then the majority of compressed driver files are kept in ./Libary/Printers/Vendor or ./Library/Printers/PPDs/Contents/Resources/en.lproj for PostScript PPDs.
When you add a printer queue, some of the information is kept in ./etc/cups. This includes the printers.conf file which has details about the added printer queues and the decompressed PPD that was selected during the queue creation.
So if you are looking at copying the data from one Mac to reduce your setup on all the other Mac's, then you may have to tell us the make and model, as there could also be a number of additional directories/files you need.
PaHu

Where is the server configuration data stored?

Where is the server configuration data stored?
<P>
The data is stored an ASCII file named server.conf
. This file is stored in
the config directory on the same server-root as the iCS 2.0 binaries. The
format of the server.conf
file is described in detail in the Administration
Guide.

Try to read
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e1959b90-0201-0010-849c-d2b1d574768b
UME user data is stored in one or more data sources. Each type of data source has its own persistence adapter. The persistence manager consults the persistence adapters when creating, reading, writing, and searching user management data. Persistence adapters for the following types of repositories are available: 1. Database: See the Product Availability Matrix on SAP Service Marketplace (http://service.sap.com/pam60) for details on which databases are supported. 2. u2022 Lightweight Directory Access Protocol (LDAP) directory: See the Product Availability Matrix on SAP Service Marketplace (http://service.sap.com/pam60) for details on which directories are supported. 3. SAP Systems based on Web Application Server 6.20 You can configure UME to use one or more of these persistence devices in parallel. Users can also be stored in several different physical LDAP directory servers, or in different branches of the same LDAP directory server.

Windows intune message are you the primary users of this computer?

When logged in with a adminstrative account, we successfully installed the Windows Intune client with the login crecentials that are specific for one user.
When this user is logged in to his Windows desktop and he wants to start the Company Portal, he receives a message after using his Intune account credentials:
"Are you the primary users of this computer? To take full advantage of the Windows Intune Portal, and to able to install apps on this computer, it has to be linked to you. If you aren't linked as the primary user of this computer, you will not be able
to install apps from this portal.
You have the option Yes or No.
When selecting Yes, you will receive an error: Oops... an error occured! Link was not successful. An error occured when we tried to link you to this device. You will not be able to install apps onto this device from Windows Intune Portal before you are linked
to the device. For assistance Contact IT.
More information will show you an Activity ID code.
When you continue you can install apps from the Portal, but each time you connect to the Portal you will receive this message.
Is this a bug?

Depending on how you plan on using Intune this may not apply but for us, it provided a "decent" work around for windows 8.1 devices.
During our initial testing of Intune, we got around this "error" message on Windows 8.1 devices by installing the Company Portal app. It required a separate Windows Store account to successfully install the app as none of my corporate test accounts
were linked to Microsoft accounts, which you had the option to do.
Once the App was installed I was finally able to log into our Company Store with the test Intune account that was linked to the Windows 8.1 tablet. Our published LOB apps were listed along with the linked device too.
You could definitely deploy or sideload the Company Portal app, but for my testing purposes installing from the Store was sufficient. Unfortunately, logging in from the website or the Applications link located in the Windows Intune Center
still will not work. A solution would be greatly appreciated as we were hoping to deploy to Windows 7 devices also.
H_C

Where does the supporting deatil is stored? in Planning or Essbase?

Where does the supporting deatil is stored? in Planning database (RDMS) or Essbase database?
Appreciate if u could reply ASAP.
Thanks in Advance!!

Supporting details are stored in Planning Applications RDBMS. check out HSP_COLUMN_DETAIL and HSP_COLUMN_DETAIL_ITEM in the application relational database
Re: Refresh Database
I can see 6 question and all are unresolved, Mark the answers if you think they are correct or helped you and close the thread.
Cheers..!!
Edited by: RahulS on Jun 21, 2011 3:58 PM

I have an iMac, where are the completed print jobs stored on the iMac and what format are they?

I have an iMac, where are the completed print jobs stored on the iMac and what format are they?
My OSX is 10.10.1

Hi
If you are using standard system or HP drivers, than the jobs contents are not saved at all.
You can see the list of completed jobs per printer via this URL: http://127.0.0.1:631/printers/
If you want to save a print job, you can do it in the print dialog, by selecting an action prom "PDF" popup.
It allows to save a job (prior or instead to printing it) as PDF or PostScript.

Where is the option to set a ToDo item to repeat? ...

I imported some calendar entries from MS Outlook onto my 5800, of which most were set to repeat every month.
Those items successfully repeat on the device but on creating a new ToDo item using the device's calendar app, there is no option to set repeating occurrence!
Where is the option to set a ToDo item to repeat?
Can anyone please help me with this as I do not want to have to keep re-creating items and / or using Outlook to create them then transfer etc.
'Ta very much.

Just found an alternative that I thought was possible but wanted to confirm.
Set yourself up a Nokia account on www.ovi.com and set up an OVI Sync account. Sync the phone to the online account to start with.
Then, using the online interface to OVI Sync you can create an event that can be repeated weekly among other things. Re-sync the phone and that repeating event will be entered into your calendar.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Windows 7 Elevating using UAC, does not change the standard users setting, it runs the Admins settings

When elevating privilege for a standard user using an admin account, the UAC runs the application under the admins account "user" and not the standard users account "user", the problem is that doing so, it does not change the standard
users settings
In this example, trying to change the "Check for Updates Automatically" as the standard user, is grayed out, you have to be an admin to change this. This is a design of Java.
When you right click and run as an administrator, the option is no longer grayed out and can be deselected, however, this only changes that setting for the admins specific "user", not the standard users specific "user" the admin is elevating
privilege for. as illustrated below.
Is there a work around for an admin to run his credentials but elevate the standard users session instead of his own or some other way to set the standard users setting when admin credentials are required?

Hi,
Based on your description, I understand that you want to disable
Check for Updates Automatically option for standard users in Java.
You can achieve this target by editing
EnableJavaUpdate registry entry. For more details, please refer to following articles and check if can help you.
(Please back up before that registry operation. That will help us to avoid unexpected issues.)
How to disable Java Update in Windows
7
Disable Java updates with
Group Policy
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
However, this issue is related to Java product. I suggest that you should contact with Java product support.
I believe we will get a better assistance there.
If anything I misunderstand or any update, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

HT5622 My husband will become the primary user of our Apple account. Should he create a new Apple ID or should I change my Apple ID to his info?

I started with an iPod years ago and have since added an iPad and iPhone 5S to our list of products. My husband is the primary user of the iPad and iPhone. Should I change my Apple ID information to his name or should he create a new Apple ID and have my content transferred to his account?

Who ever uses the iCloud email address or has their contacts, calendars etc etc on the account should keep the existing ID for iCloud, the other one should create their own ID, you can both keep using the current ID for iTunes if you have a shared media collection.

HT4867 Now that I've switched to ICloud where are the mailboxes that were stored on my Mac?

Now that I've switched to ICloud where are the mailboxes that were stored on my Mac?

On your mac, mailboxes are listed under one of several categories. Some are "on my mac" and others are in "icloud". Those emails in mailboxes "on my mac" are strictly local, they do not connect with iCloud. As Julian points out, all mailboxes on your mac are still there. They will not be on your other devices.

HT5621 my nephew is on my phone and computer as the primary user and i cant access my i phone cause i dont have his pass word he said he forgot what it is

my nephew put himself on my iphone and computer as the primary user and i can't access anything cause he forgot his pass word

Then you'll need to restore the iPhone to remove the passcode lock. iOS: Forgotten passcode or device disabled after entering wrong ...

Where is the default group information stored for a portal user?

Hello -
There is a field in the WWSEC_PERSON$ table called DEFAULT_GROUP, and it is populated with an ID from the WWSEC_GROUP$ table but it seems like there is more to the overall picture here.
If I try to manually update a users group via SQL,
UPDATE WWSEC_PERSON$ SET DEFAULT_GROUP = 318 WHERE USER_NAME = 'XXXXXXX'
Then check the portal profile for the user 'XXXXXXX' I do not see their 'Default Group' as being updated. (However the default group is in effect because these users are sent to the correct group when they log in.
What do I need to modify for the group name to show up for the user on their profile page?

Yannick -
Thank you for the reply. Do you know which table is used in OID? Basically why I need to do this is we hire many new employees every week and create accounts in AD. We sync AD -> OID but the people who create the new users never inform me that they have been created so they never get a default group assigned. This causes them to go to the 'Portal Builder' page when they login to the portal.
To fix this issue Im writing a powershell script to automatically update the default group of all employees that do not have a default group assigned. Do you know if a better method I can accomplish this for bulk OID records automatically? I'm very much open new/better ideas this was the best method I could think of currently.
Thanks again.

When I import files (copy from jpeg or copy as DNG from raw, where is the full size original stored?

I have the photos go here file, does LR5 put the untouched original there? Do I need my own file for originals and if so, how does LR5 know where to find the full size original? I have everything working but don't understand where my untouched originals go after import. Say I import off my card to My Pictures/Lightroom Catalog/ Photos go here ..... are my originals there? What if I erase my card now, do I only have partial size negatives basically? I don't understand why LR5 didnt put in an originals do here file that imports the full photo to a stock folder. I am so confused I am about ready to throw out LR5. I even bought your instructional DVD and it doesnt make where the original files location clear, it just repeats that LT5 does NOT import the original, just thumbnail and instructions, where is the program getting the photo when I double click to open it , or am I only seeing a lower resolution version of the photo and the full res is now gone because I formatted the card?

When you import photos, you can choose "Copy" or "Move" or "Copy as DNG", and then select a destination folder on your hard disk. This happens on the right hand side of the Import dialog box. So your original files go to this destination folder.
Alternatively, if your photos are already on your hard disk, you can import by choosing "Add" and the original photos remain in the existing location.
If you're not sure where the photos are, open Lightroom, go to the Library Module, and on the right hand side is the Metadata Panel. Set the dropdown to "Default", and it will show you where your photos are stored. Alternatively, you can right-click on any photo and select "Show In Finder"/"Show in Explorer" and Lightroom will take you to the exact folder where the photo is located.
So, bottom line, you are in total control of where the originals go, and if your forgot where you put them, or made a mistake, you can always find out where they are.
What if I erase my card now, do I only have partial size negatives basically?
If your import was successful, then the photos are now stored on your hard disk. So you have the full size original for Lightroom to work with.
it just repeats that LT5 does NOT import the original, just thumbnail and instructions
Lightroom does import the original, which means, in Lightroom jargon, that it records the location and metadata about the photo; in other words, Lightroom knows where the photo is, but Lightroom NEVER contains your photo, your photo is ALWAYS stored on the hard disk.
Because Lightroom now knows where your photo is located, it is important that you not manage your photos (move, edit, rename, delete) outside of Lightroom. Photo managements tasks now must be done in Lightroom. (There are advanced methods that let you manage your photos outside of Lightroom, but these would be NOT RECOMMENDED for beginners)

Where is the primary user setting stored in CM database?

Similar Messages

Maybe you are looking for