Where to assign task list to material

how to assign materia to task list, pls explain with t-code, im newbie
Thanks n Regards
Karad D D

Dear Karad,
1.As said by our forum dude dogboy49, you can assign the material to an existing task list in CA02.
2.Or else you can create a new task list specifically for that material in CA01,by mentioning the usage as 1 and status 4 -
released general and the operation details like the work center and the timings.
3.If you want to assign this material to an existing task list,goto CA02,mentiong the group number and the plant and enter and
then click on the header key and then click on material assignment and then enter the material code and the details.
Check and revert back.
Regards
Mangalraj.S

Similar Messages

Report name for services where used in task lists

plz let me know report name for services where used in task lists.

Hello Sairam,
I am abit confused. Are you looking for report to find where the task list is used ? You can find all the available reports in The menu path Logistics -> Production -> Master Data -> Routings -> Reporting.
If you want a specific one then please provide more details
Thanks
Amber

No valid task list for material "" plant "" for selection criteria

I am getting the following error while creating a production order:
No valid task list for material "" plant "" for selection criteria
Does anyone know how to fix this?
thanks,
Scott

Dear,
1. Check in Order type dependent parameter - OPL8, select your Plant & Order type. In this check the task list, it should be N. then selection priority in OPJF settings
2. Chek the routing valid from date for this material by CA02. The production order start date must be between valid date.
3)Kindly check the routing header.Whether it is for usage 1 and Release status '4'
4) Task list we maintain in OP8B please check and come back.
Regards,
R.Brahmankar
Edited by: R Brahmankar on Nov 19, 2008 9:57 AM

Where do I find list of material group for service material

Hi,
please any one tell , where do i find list of material group used for service materials?
regards,

Hi,
What is the criteria u are using to find out material groups?? If it is on the basis of material type DIEN (services) then go for T code MM60 put material type and u will get all the materials with material groups which has material type as DIEN.
Also u can directly go to SE16 and in T023 table find all the material groups.
Edited by: sapvibhor on Feb 23, 2011 10:57 PM

Where is Yahoo task list on BB Curve?

I have my BB linked to a business Yahoo mail account...no problems with email...but I loaded a bunch of tasks in Yahoo mail app on laptop and sync'd it with BB...but I can't find where the task list is on BB...please help...thanks...

Best to post in the iTunes section to get an answer to all questions.
As for the device list, it's in the top left along with the tabs for Music/Movies etc.

Assigning task list to order

Hello everybody,
I would like to assign a task list to PM order. Is there an API to do it?
Best regards
Boguslaw

HI,
YOu can add manually by in IW32
Extras --> Task list selection --> Direct entry
To add automatically check User Exit
IWO10020 -Automatically include task list
Edited by: M.Alagesan on Oct 26, 2010 12:29 PM

Material specification Vs Task list in QM

hi,
Can any one pls explain on which instance i need to use material specification for the material.
or what is the prime differance or advantage in using Material spec over task list. especially for GR inspection of external procured components...
Need to justify the use task list/ material spec to client.....
Thanks in advance.
regards
Saran

hi saravanan,
You can inspect a material based on material specification or by task list.
Material Specificatin is used at client level
if the client has same type of checking for all the material across the plant then we can go by material specifaction.
If they have different parameters to check then we have to go by task list only.
there are many advantages and disadvantages in both the cases.
please go thru this link .
it will be helpful to you.
http://help.sap.com/saphelp_47x200/helpdata/en/2d/350f8a448c11d189420000e829fbbd/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/2d/350f8a448c11d189420000e829fbbd/frameset.htm
Reward pomits if it is helpful

Change task list in Qm Lot

Hi freinds,
How to change task list in inspection lot manually??
I have maintained manual assignment of task list in material master.
Regards,
Amit Shirsath.

Hi Amit,
There are two ways to incorporate your requirement: -
1. With having singable tasklist( With singable Tasklist counter)
Assume you have a Material "M"
Customer: - C1 And C2
Tasklist Group:- ABC
Counter: - 01
Go to QP02. Select the The Tasklist group counter line item, click on "Material Assignment" And assign the Material and both the customer C1 and C2 here to the material.
(Material will be assigned two times)
Now go to characteristics overview screen. Select the MIC and click on "Dependant Characteristic". Where if you have different limits (5 to 10 for C1 and 5 to 15 for C2), you can assign it the relevant line item representing the customer.
2. Two different group counters:-
Assume you have a Material "M"
Customer: - C1 And C2
Tasklist Group:- ABC
Counter: - 01 for C1
Counter: - 02 for C2
Then it is very simple boss! Go to material assignment and assign the materials along with the Customers over there.
update us to help you more, reward points to help you better!
Regards,
Shyamal

Inspect with Task list not visible in QM view

In Material master QM view, for 01 inspection type, inspect with tast list is not visible.
Please advice how to make visible.

Hi
SPRO-->Quality Management->Quality planning->Inspection planning----> Assign task list type to Material type
Definitely u get th lot.
Regards

In inspection lot..task list does not fetch

Hi QM Guru..
when i do UD for fish material. with QA32....in QA32 showing inspection lot no..but when i select line item of inspection lot and click on inspection lot..one window open..when i go inspection specification for task list..when i click on task list....show the massage....
but i all ready created inspection plan from QP01...i have over ther MIC and sampling procedure also
No inspection plan could be found
Message no. QA278
Diagnosis
A task list could not be found for the selection criteria. The inspection setup for this material in the quality management view of the material master defines an inspection with a task list.
System Response
Sample calculation and inspection lot release are not possible.
Procedure
Check the:
Selection criteria
Material/task list assignment
Task list status
Task list usage
Task list usages i have taken 5 for GR
status 4 general release
kindly suggest me why task is not taking...i have already created task list
kindly suggest me
Regards
Aqueel

Dear,
Is this quality Plan is back dated and Lot size should be 1 to 9999,999.
Why are you creating rate routing? check lot for 04 insp type in QA02.
Or for old material just create one new order and test it once again.
You can check the statuses in config.
QM>Quality Planning>Inspection Planning>General>Define Task List Status.
You should find that "4" is in there with all the check marks on.
QM--> Quality Inspection --> Inspection Lot Creation --> Maintain Inspection Lot Origins and Assign Inspection Types.
There is a column called status. For each inspection ORIGIN, you can specify the status of the inspection plan. It appears someone in your system changed the 4's to an X and then created the status "X".
Regards,
R.Brahmankar

Task List Type

I am creating maint plan (IP42) and during assigning Task List, it is asking for "Task List Type" as input.
I have searched in header screen of task list but could not find it. Can anyone say from where I can get this.
Regards.
Manoj

HI
at the time of creating plan, youhave to assign the task list,
so when you search from plan you need to tick on check box of FL tasklist (if plan belongs to FL level),tick equipment task list if you want to assign the task list created against the equipment(IA01)
if you want to assign the general maintenance task lsit tick on the check box of general maintenace task list.
if you want to know the task list type
A -general task list
E-Equipment Task List
T-Task List for Funct. Location
-ashok

Task List Access Manager Role in Shared Services

Hi
The documentation says this role "Assigns task lists and tasks to other users". I have assigned this role to a group (in Shared Services), I have given that group Manage and Assign access to the Task List (in Planning), and have even done a security Refresh.
Yet, when I go in as a user who is in that group, I do not see the Assign Access button in Manage Task Lists.
Is this a bug or have I missed a step?
We are on 11.1.2.1
Thanks!

Hi,
Have you tried generating a provisioning report in Shared Services, have a read of :- http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_cas_help/provrep.htm
If that doesn't suit your requirements then you could always have a look at using CSSImportExportUtility to export provisioning to a csv file. The utility is located in hyperion\common\utilities and has a pdf on instructions how to use it.
Cheers
John
http://john-goodwin.blogspot.com/

Task list in hyperion planning dataforms 11.1.2 version

Hi,
I created a task list using administrator account and assigned these task list to user1. I mention a due date and alerts also. Here user1 have appropriate roles to access the dataform and to finish the task also.
Now the issue is, when user1 finished and put the status as completed. But in admin user, those tasks status is showing as Incomplete.
How admin will get that updated status as completed in task list.
Regards,
Madhu

Hi David Mendele,
Thanks for the reply.
ya as u said i looked into report. but there also am getting status as incomplete using admin user.
First of all i will explain u clearly about this issue.
using admin account i created two task lists and assigned these tasks to user1. for example salary account and salary details ok.
Now i login as user1 and put those task lists status as completed ok.
Then now i login as admin and checked out those Task lists. In this scenario, am not getting those task lists(*salary account* and salary details) status as completed.
It is still showing that status as Incomplete only which is already finished by user1 ok.
Now, how can i get those assigned task lists status as completed automatically using admin user.
I hope u understand about the issue.
Regards,
Madhu
Edited by: 895234 on Nov 30, 2011 8:01 AM

Non-stock material assignment in task list

Hello members,
Can I assign non-stock materials in task list????
If yes then how???
Thanks
Warm regards
Rajat

Rajat,
You cannot directly assign a non stock material to the task list.But you can include the non stock material in the BOM for the assembly(In case of General task list) or Equipment /FL object BOM.Once its included you can then select these non stock items into the task list component screen.
Regards
Narasimhan

Material specification and Inspection plan - Task list usage

Dear Friends,
In inspection type Task list usage is assigned
For Example
inspection type 01 - usage - 03
inspection type 05 - usage - 05
inspection type 06 - usage - 07
inspection type 10 - usage - 06
In my scenario i want to use all the above inspection type for a product
if i use mateial specification there is no any problem with my Task list usage
If suppose i use inspection plan do i need to create different inspection plan with different usage
or is it possible to create one inspection plan with all the above usage
what about universal usage 03 can i use it
i try to use but system does not triggering inspection lot
can any one Suggest some ideas
Many Thanks & Regards
Raj

Hi Raju,
All of first pls understand the concept of Task list and specification.
If you need to inspection any material in very systematic manner, where you will have well segregated operations where the appropriate Work Centers will be bind and under that hierarchy MIC will be attached. The inspection will be governed by some inspection points. And according the the same Samples will be calculated. When you wanna go with all these functionality then you must have to use Task list (Inspection plan).
And if you don't wish to have these functions then simply go with the material specification.
Now it comes the actual query about task list usage.
If there is a common inspection plan is supposed to be used for all the inspection types for your material then you can prepare only one inspection plan, put ant of the Usage to it it can be 05 or 03 universal. But what you have to do is,
Go to SPRO->Quality Management->Quality Inspection->Inspection Lot Creation->Maintain Inspection Types Execute and set the Task list usage as the same it is set in the inspection plan for all those Inspection types for which that common inspection plan is supposed to be used.
Note:- There is no any link between inspection lot creation and task list usage of inspection plan.
Regards,
Shyamal

Where to assign task list to material

Similar Messages

Maybe you are looking for