Where to insert memory card on hp envy all in one

Where do I insert a memory card on hp envy in order to print a photo?

Hi,
HP Cartridge Protection is a feature meant to avoid couterthief.
A Protected Cartridge is a USED cartridge which been protected by its previous owner.
Once a Cartridge being protected by a user from the HP software, the cartridge can only be used the specific printer, it cannot be used on any other printer.
You will need to replace the protected cartridge in order to resolve the problem, its protection cannot be disabled.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

Printer C7280 will not print and says Insert Memory card!

Printer will not print C7280 and says (Insert Memory Card) Why would i wish to do this I just want it to print?
This question was solved.
View Solution.

Hi locobritannia,
I recommend downloading and running the HP Print and Scan Doctor, as it should automatically fix the issues with the printer. Please, let me know how it goes!
Thank you,
I worked on behalf of HP.

HP Envy All-in-One Missing Parts

My fiance just bought me the HP Envy all-in-one desktop computer. He was going to set it up for me yesterday and noticed it's missing the dongle for the wireless keyboard and wireless mouse. Has anyone else had this issue after purchasing this product?
We got it from our local Best Buy store and it was in a sealed box so we know it wasn't a returned product. Our store only has 1 left at least from what we saw on the shelves and hope they can fix our issue today.

Dongle is a small USB part and found near the keyboard or mouse box. Sometimes inside the keyboard and mouse (In a dongle housing, you would find a pocket/socket where it can be stored.)
Refer documentation to locate the dongle or call HP.
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"

Wireless printing problem with HP Envy all-in-one 110 when running Mac OS 10.7

I just bought the HP Envy all-in-one 110. I have a Macbook Air running IS 10.7. I managed to install the software correctly and the wirless network light is showing on the printer. I ran a test page from the printer and all the settings say they are "enabled." But I still can't get the printer to print over the wireless network. When I plugged in a USB cable, I managed to get it to print. I have a wireless router running over the Sonic.net DSL network. Network strength is good. I've switched off and restarted all equipment several times but still no results. Help!

Hi,
I believe the router may not support Multicasting, a network protocol used for Apple's Bonjour service to operate as it should.
Will be helpful to know the exact router brand and model.
As a workaroung, you may try setting the printer by using standard IP, it should allow you to print, however the router issue (more likely) have to be handled first to allow the full software functionality including scanning.
Follow the steps below to set an IP print queue, it will also help to better understand the cause for the problem:
Enter System Preferences > Print & Scan.
Click the plus sign.
Click the IP icon.
Select the HP Jetdirect Socket protocol.
Enter the printer IP address into the Address field
Now try printing using the newly created print queue, listed as the printer IP address.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Connecting a second monitor to an Envy All-In-One

Please excuse my ignorance on this topic in advance.
I just purchased an HP Envy All-In-One. Model 23o014; Product F3E94AA#ABA. I'm running Windows 8.1. I'm very happy with my purchase so far.
I also purchased an AOC E2470Sw monitor and would like to connect this as a second monitor to the All-In-One.
The AOC monitor has a VGA(? - 15 pin connector) connection), but also has two HDMI inputs. I THOUGHT (with concurrence from my distracted salesman) that I could connect the two using the HDMI connectors on both machines, but I'm getting a blank screen on the AOC when I try it.
What am I doing wrong?
Thanks,
Sally
This question was solved.
View Solution.

Hi...
The HDMI connector on the base is an input,not an output. For a second monitor, you would need to go with a USB to video adapter.
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

Can I install a bigger graphics card in my HP all-in-one MS200 Desktop?

Hey guys, I was wondering if it is possible to install a graphics card in my HP all-in-one MS200 desktop. I've been playing DayZ, and my FPS is terribly low. Looking around, I've noticed that most people say the problem is that you have a weak graphics card.
Is it possible to do this? If so, what graphics card would you recommend I buy? (I'm looking for a moderate boost in preformance. I don't really need a beast of an upgrade, or anything like that).
This question was solved.
View Solution.

The simple answer would be "not possible". Limited models support MMX cards, and these are low wattage.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

The Drive carriage in my Envy All-in-One will vibrate and make a "Buzzing" noise

The Drive carriage in my Envy All-in-One will vibrate and make a "Buzzing" noise. I can stop the noise temporarily by pushing in on the drive. The noise always returns.

Heavy wrote:
The Drive carriage
By Drive carriage do you mean cd/dvd drive?, could you plese give more details
Charles
Independent Computer Technician

How to remove accidentally inserted memory card to dvd drive?

Is there any support online ? Chat maybe ? I accidentally inserted my memory card to the DVD drive ? I just need to talk to somebody before I take it to the store. I don't have the box anymore Please help =(

You can try this - may or may not work: shut down Mac. Unplug everything and very carefully turn it on its side with the slots facing down. Now very gently shake it a bit to see if the card will dislodge.

Memory card issue- HP ENVY 15-j186na Notebook

Product name: HP ENVY 15-J186na
Product number: j2t71ea#abu
Operating system: Windows 8.1
Hi there!
I'd like to upgrade the memory, but I can't find the exact model, In the product page it says:
Memory:
8 GB 1600 MHz DDR3L SDRAM (1 x 8 GB)
Memory slots:2 user-accessible
In the HP support software in my laptop it says:
Memory slot 1: 8GB Samsung 1600MHz
Now HP recommends that we buy the same memory card from the same manufacture, and despite searching , this is the only one I've found that appears similar to the one I've got:
http://www.amazon.co.uk/Samsung-original-204-pin-PC3L-12800-1600MHz/dp/B00I21G832
It says: (Samsung original 8GB (1 x 8GB) 204-pin SODIMM, DDR3 PC3L-12800, 1600MHz ram memory module for laptops)
My question is, is it the same memory card that I have? Reason is that in the model page it says “ SDRAM” and in Amazon it says “ SODIMM” and I have no clue whether it'd fit or not.
If not, can you please help to find the exact memory card I have in Ebay, Amazon or any place that sells it in the UK.
Many thanks and excuse my illiteracy in this sort of thing !

Need to add this, I've ordered a new memory card. These are the specifications:
Brand: Crucial
Module Size: 8GB
Warranty: Limited Lifetime
Specs: DDR3 PC3-14900 • CL=13 • Unbuffered • NON-ECC • DDR3-1866 • 1.35V • 1024Meg x 64 •
Part number: CT5735670
Is it compatible with the memory card I already have?

Inserted memory card to upload photos to iPhoto and received this message "no images on memory card meet download conditions".

I've been using my memory card from my Canon camera to upload photos to iPhoto. No problem. I attempted to use my daughter's memory card from her Canon camera (different model) and I get a pop up window stating "No images on memory card meet the download conditions." Can anyone tell me why or what I can do so I can save these photos to my iPhoto?

Well still the best guess is
the best guess is incorrect settings (as far as Mac iPhoto is concerrened) on her Canon Camera
Give image capture (in your application foder) a try and see what it sees
Do yu have a card reader? If so try it and see what the finder sees on the card
LN

Where is the option to not load duplicates. Every time I load a memory card bridge checks off ALL photos and wants to download previously downloaded photos.

How do I get Bridge to not load duplicates automatically. Now I have to check off new photos when I load a memory card. I can't find the setting to do this.

Bridge CC

HT4199 where do I put the micro sim for the iPad, dosent seem to be any where to insert the card

Where do I put the micro sim for the iPad , I cant find any where to put the card.

What model is your iPad? (iPad, iPad 2 or New iPad). Did you get the AT&T or Verizon model? If you got the Verizon model, it doesn't have a SIM slot.

Addressing the inserted memory card HP Officejet Pro 8600 e-All-in-One Printer - N911a

I upgraded to this printer from a 6500A Plus which allowed the SD card to be accessed with I.E. via the printer's IP address followed by "memory_card" The full syntax in my situation was http://192.168.0.111/memory_card The problem is that doesn't work on the 8500, and neither do other permutations I tried such as "memory", "memorycard", "SD" etc. Does anyone know what syntax works on the 8500, does anyone know why it can't be the same syntax for all? The setup and user's guide didn't touch this topic on the 6500 and neither do they on the 8500, and it's not in the extended FAQ's on the 8500, apparently I'm the only one asking, and my need is not that uncommon. Thanks in advance for your help. Dean
This question was solved.
View Solution.

If you prefer to connect to the memory card in the printer from a DOS prompt ( cmd ) you can try the following
c:\ net use x: \\ipadress\memory_card
in my case it looked like this
c:\ net use z: \\192.168.1.10\memory_card
you might want to type the following command line first to be sure the drive letter you choose to use is not already being used.
c:\ net use
This should list all the file shared already connected to your PC

Please help! memory card password! I never set one...

I plugged in my memory card from my broken nokia e71 into a new nokia e6 and it asks for a password! I never set a password to begin with! is there some default code to override this? I really need my pictures off this sd card. please help.

@Koncrete
You might like to look at this post in particular and others by shuntfield in this thread:/t5/Eseries-and-Communicators/E71-Auto-Remote-Lock/m-p/420626/highlight/true#M34724
Although you haven't knowingly set a password AFAIK it is possible to change it to new one using the remote lock feature.
Happy to have helped forum with a Support Ratio = 42.5

Canon EOS 350D does not see memory card--I've tried two different ones. Will not format--err 99

My EOS 350d has not worked since it was shipped to my daughter. Bought new memory card and camera still does not recognize that a card is in it. When connected to computer I could see card but it had 0 used memory and 0 memory available. Now it does not show at all. Using canon software get same response--no memory card. Have tried with two different memory cards. Even formatted one card on PC, still nothing. Any ideas what to try next--pins look like they are all in correct place.

Unfortunately, the Error 99 code is not a specific error code and can indicate a number of issues, such as battery power issues, shutter issues, etc. The more I looked into the 350D and memory card compatibility the more I think that may not be the issue. In all honesty, I'd contact Canon support as you may have to send your camera in for repairs.
Before doing that, though, I'd try this. Restart your camera, wait a few moments then set the camera's power to Off and remove the batteries. Open the memory card slot cover to make sure the memory card is securely set in the card slot, then reinsert the batteries and turn the power to On. Hopefully that will do the trick, and if not I'd update the firmware for the camera as a last resort and see if that rectifies the problem. If not, contact customer support.

Where to insert memory card on hp envy all in one

Similar Messages

Maybe you are looking for