Which 6330 board do I have??
can someone please tell me exactly how to find out which 6330 board I have? It is supposed to be the Lite version, but it has the jumper that allows me to run an Athlon Thunderbird 1.3 @133 FSB.......
I cant tell if I have the Lite or the LE3 version....
Well you could always take off your case, and look some where between your pci slots. You should see the label, it should have a name for example k7t turbo ver. 3 or something in that manner.
Similar Messages
-
Which logic boards will fit my Macbook 5,1?
I am looking to upgrade my late 2008 Macbook and would like to replace the logic board instead of purchasing a new computer (I know it's expensive, and I've already upgraded to 8GB of RAM and 750GB storage). Which logic boards are compatible with my Macbook 5,1? I have a 2 GHz Intel Core 2 Duo, so I could feasibly upgrade to the 2.4 GHz late 2008 logic board, but I would like to upgrade quite a bit if possible.
Any input is greatly appreciated!
Specs of my MacBook:
Model Name: MacBook
Model Identifier: MacBook5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 8 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MB51.007D.B03
SMC Version (system): 1.32f8
Serial Number (system): W88433751AQ
Hardware UUID: DD281EE0-65F6-5B91-8DFA-A84F6BEF222E
Sudden Motion Sensor:
State: EnabledThe 5,1 Aluminum Unibody was an oddball in the MacBook series. It doesn't fit in with the rest of the White and Black MacBooks or the 13" MacBook Pros. The 2.4Ghz 5,1 Aluminum Unibody Logic board would fit though.
-
Which NF4 Motherboard Do I Have.
Which Board Do I Have?
MSI has done a great job in getting all the new nForce 4 based boards out into the market, but it sometimes gets a bit confusing which board is which based on point of purchase., (country, and regions within a country), and manufacturers description. Currently MSI has seven nForce 4 based motherboards in the channel, three of which are NF4-Sli, two are NF4-Ultra, one is plain NF4 and one NF4-4x. Adding to the confusion is the fact that not all boards are available within a given region, and the fact that MSI desperately needs someone to proof read each boards internet descriptions as some don’t even make reference to the correct chipset.
The MSI K8N Diamond is virtually identical to the MSI K8N Neo 4 Platinum Sli, where the only difference between these two boards is based upon the option package. A version of the Diamond ships with a WiFi+Bluetooth Dual Net card. The only real distinction between these two boards are the region they are marketed and the logo silk-screened on the boards themselves.
MSI K8N Diamond aka MS-7100-010
2 x PCI-E 16x (1x) Ports
4 NV SATA II ports which support Raid 0. 0+1, and JBOD mode
2 SI SATA II Ports supporting Raid 0, 1 mode
1 Lan port via NF4 Sli Chipset featuring 10/100/1000
1 Lan port via Marvel 88E8053 featuring 10/100/1000
1 IEEE 1394 port VIA 6306 Chipset
Onboard 24-bit H/W Audio Creative SoundBlaster
In some areas, this board will ship with an 802.11b WiFi + Blurtooth Dual Net PCI card
MSI K8N Neo 4 Platinum Sli aka MS-7100-020
2 x PCI-E 16x (1x) Ports
4 NV SATA II ports which support Raid 0. 0+1, and JBOD mode
2 SI SATA II Ports supporting Raid 0, 1 mode
1 Lan port via NF4 Sli Chipset featuring 10/100/1000
1 Lan port via Marvel 88E8053 featuring 10/100/1000
1 IEEE 1394 port VIA 6306 Chipset
Onboard 24-bit H/W Audio Creative SoundBlaster
MSI K8N Neo 4 Sli aka MS-7100-030
2 x PCI-E 16x (1x) Ports
4 NV SATA II ports which support Raid 0. 0+1, and JBOD mode
1 Lan port via NF4 Sli Chipset featuring 10/100/1000
1 IEEE 1394 port VIA 6306 Chipset
Onboard 24-bit H/W Audio Creative SoundBlaster
The MSI K8N Neo 4 Platinum and the MSI K8N Neo 4-FI are nVidia NF4-Ultra based solutions, featuring:
MSI K8N Neo 4 Platinum aka MS-7125-010
1 x PCI-E 16x Port
1 x PCI-E 4x Port
1 x PCI-E 1x Port
4 NV SATA II ports which support Raid 0. 0+1, and JBOD modes
4 SI SATA Ports supporting Raid 0, 1 Raid5, Raid10, JBOD modes
1 Lan port via Marvel 88E1111 featuring 10/100/1000
1 Lan port via Marvel 88E8053 featuring 10/100/1000
1 IEEE 1394 port VIA 6306 Chipset
Onboard 7.1 channel audio codec RealTek ALC850
MSI K8N Neo 4-FI aka MS-7125-020
1 x PCI-E 16x Port
1 x PCI-E 4x Port
1 x PCI-E 1x Port
4 NV SATA II ports which support Raid 0. 0+1, and JBOD modes
1 Lan port via Marvel 88E1111 featuring 10/100/1000
Onboard 7.1 channel audio codec RealTek ALC850
Then there is the MSI K8N Neo 4-F which is built around the nVidia NF4 Chipset, featuring:
MSI K8N Noe 4 F aka MS-7125-030
1 x PCI-E 16x Port
1 x PCI-E 4x Port
1 x PCI-E 1x Port
4 NV SATA ports which support Raid 0. 0+1, and JBOD modes
1 Lan port via Marvel 88E1111 featuring 10/100/1000
Onboard 7.1 channel audio codec RealTek ALC850
The last, but by no means the least, is the MSI K8N Neo 3 F, based around the nVidia NF4-4x. What makes this board high interest is two fold. First, it’s one of a few boards marketed to give Socket 754 an upgrade path. Second, not only does it have the standard 16x PCI-E Port, but also has a slot that MSI is calling an AGR (Advanced Graphics Riser) slot for, drum roll please, an AGP card. Yes, we have an NF4 based board that contains both 16x PCI-E and AGP and which runs all current A64/754 chips. This board features:
MSI K8N Neo 3-F aka MS-7135-010
800MHz HT
1 x PCI-E 16x Port
1 x PCI-E 1x Port
1 x AGR (AGP) Slot
4 NV SATA ports which support Raid 0. 0+1, and JBOD modes
1 Lan port via Marvel 88E1111 featuring 10/100/1000
Onboard 6 channel audio codec RealTek ALC655I noticed that when I researched the slot. Like you mention HighTest it allows one to use their existing AGP card until they upgrade to PCI-E. Should see alot of peeple moving to that board with existing Socket 754 based systems.
-
We're doing a research that is dealing with daq and control. Basically, we
have about 60 input and exactly 5 output to 5 control motors. We're
considering buying a daq board. With this spec, does anybody have any idea
on which ni board to choose?The main problem being that no NI multifunction daq card has more then 2 output channels, your solution will be to have more than one card in your system. To be more detailed, some more details are required on your needs, and perhaps the best solution is to call a NI office.
To design the correct mix of cards to use you will decide:
. Which signal to output (current or tension, and in which range)
. Characteristics of the input signal (again: current or tension and which range; in addition: if single ended or differential, i.e. common referenced or floating sources)
. Sampling rate desired both for output and input
. Software to use for the system. If labview: development system or standalone executable?
You could also use the daq designer (the ni utility for
configuring an acquisition system, http://cosine.ni.com/ddonline.htm - there is also the possibility to have a free copy on CD): you will probably be guided into an SCXI system, which can be neither the simplest nor the cheapest according to your actual problem.
Hope this helps
Roberto
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos? -
MSI 945p Neo3, which pci-e does it have?
Hi
I have a rather old MSI 945p Neo3 motherboard, and my graphics card just broke down. As my computer is old, and money is limited, I've decided to take the budget approach to buying a new graphics card, but I need to know if it will be compatible with my old motherboard. From what I understand, the 945p Neo3 uses a first generation PCI-E slot, and while PCI-E cards usually are backwards compatible, I've heard of people who have had problems with the very first generation of PCI-E (1.0a), while the slightly newer first generation PCI-E slots work (1.1). The card that I'm looking at is a ATI Radeon HD 5450 (which is the second cheapest card I can find at the moment). Does anyone know if this card will work on my aging computer?Quote
MSI 945p Neo3, which pci-e does it have?
http://eu.msi.com/product/mb/945P-Neo3.html#/?div=Detail
Quote
• One PCI Express x16 slot. (supports PCI Express Bus specification v1.0a compliant)
• One PCI Express x1 slot. (support PCI Express Bus specification v1.0a compliant) -
I spend good money for my iPhone i have the iPhone 5 with the new charger slot which is smaller. I have been through at least 3 charging cords and this is not acceptable to me. i never had a problem with this on my older phone. apple needs to correct this and reimburse me for this cord.
Charging cords are covered by the iPhone warranty or their own warranty
if puchased separately. Take your iPhone and the cords to your local
Apple store for evaluation and possible replacement. -
I just bought a new iMac and now I amtrying to use it as a screen for my Macbook pro, but it don’t have a MiniDisplayPort the new model only have Thunderbolt which my Macbook don’t have. Isthere any way to connect this two mac’s anyway??
Screen sharing setup in 10.5, 10.6 are described by the links by operating system. 10.7 is fairly similar to 10.6.
And if both Macs have Firewire, you can setup a Firewire over IP network for fast communication between machines. Note if you have two different Firewire ports a 6 pin to 9 pin Firewire cable does exist. There are no Firewire to USB cables. -
When I updated to iOS 8.3 I lost all shared photo albums on my iPad Air. Other devises which I shared to still have access to photo albums but my iPad does not, therefore I can no longer add or delete to shared albums. I can create new shared albums.
Hello JimS19,
I'm sorry to hear you are having these issues with your iPad. If you are having issues accessing your Shared Albums from your iPad (but not from your other devices), you may want to double-check your iCloud Photo Sharing configuration as outlined in the following articles, just to make sure it hasn't changed:
iCloud Photo Sharing FAQ - Apple Support
Get help using iCloud Photo Sharing and shared albums - Apple Support
Sincerely,
- Brenden -
My music files etc were all located on my old laptop which was stolen. I have just plugged my iphone in to my new computer and it has deleted all my files. Has anybody got any ideas on how to retrieve the files?
WINDOWS?
Connect the iPod to your PC. If iTunes starts syncing (ie erasing) your music automatically, hit the X in the upper right hand corner of iTunes display, to the left of the search box, to stop it.
In Control Panel, Portable Media Devices, double-click your iPod.
In the Tools menu -> Options, in the View Tab, check "Show hidden files and folders."
Navigate to the Music folder. On my 'pod, the full path is
Portable Media Devices\NAME of IPOD (F:)\iPod_Control\Music
Select all the music folders, and drag and drop them into a folder on your hard drive, or directly into iTunes.
And you're done! The iPod music folder structure is strange and inexplicable, but once you move your files into iTunes you can set it to automatically organize your folder by artist and album to clean that up. (To do this, in iTunes Edit menu, choose Preferences and in the Advanced tab, check "Keep iTunes Music Folder organized."
might be out of date worth a try -
Hi - I recently purchased a new iMac. I have a registered cs5 design premium package which is an upgrade - I have no disc for cs4 but have the qualifying serial number for it. I have installed cs5 via download onto my iMac but it is not accepting the serial number. Can anybody help. Does anybody else think that Adobe will loose a lot of customers by not providing any chat or call support for cs5 users??
You can support serial number and activation support.
Mylenium -
i use a macbook pro which came with facetime i have an iphone 4S as well. whenever i use the wireless on my iphone i can facetime with ease however when i use the same wireless for my mac to facetime the call always gets disconnected.
To use factime on your Mac, I believe you will need to use your email address to do so instead of your wireless number. Since you can't make calls on the Mac.
-
When I open iTunes as the source, it says it needs to be open to populate, which it is. I have no knowledge of computers...like, at all....so I need some (simple) help? If possible? Thanks.
When I open iTunes as the source, it says it needs to be open to populate, which it is. I have no knowledge of computers...like, at all....so I need some (simple) help? If possible? Thanks.
-
how do I determine which version of OS I have on my old iphone 3gs--so I can determinw whether I can set up Icloud? thx
Settings > General - About.
If the iPhone is up to date, go to Settings and you will see a setting for iCloud. -
How to find which profiles created with SU02 have a specific company code
We just added another company code.
We have company code 10 & 20
We're trying to find out which profiles created with SU02 have company code 0010 or * for BUKRS
I know that you can get that information with SUIM for field text BUKRS and it will show you all the roles or I can browse table agr_1252,
But how do I get the same information for profiles created with SU02
I just want to make sure that users that have company code 0010 cannot access company code 0020 and vice versa
Thanks a lot in advance, this will be very helpful for me
Thanks again
JoeHello Joe,
Solution is to be found in SUIM->Profiles by complex selection criteria. In the selectin screen uncheck the field 'Generated Profiles'
(t-code=S_BCE_68001409)
Total Questions: 58 (34 unresolved)
Please clean up your threads....
Thread locked as per forum rules.
b.rgds, Bernhard -
why will some websites which loaded fine before now not load - when other favourites load fine, and new searches are fine? This only affects 2 websites, both of which were bookmarked. I have removed them as bookmarks and this makes no difference.
From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
Maybe you are looking for
-
Problem with HP Printer - has stopped printing for no apparent reason!
Hi all, I have a Powerbook G4 and an HP Deskjet 3820 printer that have got along just fine ever since I first got the laptop - in fact, until just a few days ago it was printing normally with no trouble at all. Now, however, it stubbornly refuses to
-
Move/remove/change RSS button from next to refresh sign (Safari 4.0.4)
How to move/remove/change RSS-button location from next to refresh sign as I'm wasting alot of time everytime when trying to hit that refresh button? I know I can use keyboard to refresh a webpage, but I really like the easy to use stop/refresh butto
-
Stop Media Encoder Compositing error? - HELP!
I am queing a sequence from Premiere Pro CC to Media Encoder. Its a composite of a subject on a green screen keyed background with some slide overlays. When the sequence is rendered there is an odd 'cropping' effect on the slide portion of the video.
-
My iTunes won't open! I uninstall it and re-install! When I try to open it says locked disk
My iTunes won't open! I uninstall it and re-install! When I try to open it says locked disk?
-
Fonts not displaying properly in Safari
I built a webpage in Adobe Dreamweaver and for the most part the text is editable. It displays properly in all web browsers (internet explorer, chrome, firefox) except for Safari. When I view it in Safari on my MacBook Pro, the sections where text is