Which authorization required?
Hi experts,
I believe that I have 2 problems with authorization.
In my web dynpro, I have implemented the preview PDF from SMARTFORM as taught in the tutorial below:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0de1eb8-0b98-2910-7996-8a3c2fcf6785
Also, I have also called another function BAPI_OBJCL_GETDETAIL somewhere in my web dynpro.
However, the function is returning me a no authorization for function error. Whereas the preview PDF page shows a blank page (which is working fine on my developer ID).
Can anyone help me with what are the authorizations required?
above mentioned BAPI requires autority object 'C_KLAH_BKL' to be added to your profile. Check on this.
Regards
Manas Dua
Similar Messages
-
hi,
this is my requirement
how to provide authorization to be primarily based on
plant code
purchasing group
material group
incoterm
vendor account group.
please provide me the procedure and if there is any code for it please provide.
thanks in advancePARAMETERS carr TYPE spfli-carrid.
AT SELECTION-SCREEN.
AUTHORITY-CHECK OBJECT 'S_CARRID'
ID 'CARRID' FIELD carr
ID 'ACTVT' FIELD '03'.
IF sy-subrc <> 0.
MESSAGE 'No authorization' TYPE 'E'.
ENDIF.
AUTHORITY-CHECK OBJECT auth_obj [FOR USER user]
ID id1 {FIELD val1}|DUMMY
[ID id2 {FIELD val2}|DUMMY]
[ID id10 {FIELD val10}|DUMMY].
Addition:
... FOR USER user
Effect
This statement checks whether authorization is entered in the user master record of the current user or the user specified in user for the authorization object entered in the field auth_obj, and whether this authorization is sufficient for the request specified in the statement. A flat character-type field that contains the name of an authorization object is expected for auth_obj. Without the addition FOR USER, the authorization of the current user is checked.
With id1 ... id10, you must have at least one and can have a maximum of 10 authorization fields listed for the authorization object specified. With id1 ... id10, "flat", character-type fields are expected that contain the name of the authorization fields in uppercase letters. If an authorization field is specified that does not appear in the authorization object, no check can be executed and sy-subrc is set to 4. For each specified authorization field, you must specify with FIELD either a value to be checked in a flat, character-type field val1 ... val10 or the addition DUMMY.
The authority check is carried out if the check indicator for the specified authorization object for the current context is set to check with any proposal status. If the check indicator is set to no check, no authority check is carried out and sy-subrc is set to 0, as with a successful check.
The authorization check is successful if one or several authorizations are created for the authorization object in the user master record and if - for at least one of the authorizations - each of the value sets defined there for the authorization fields specified using FIELD includes the value val1 ... val10 to be checked. Authorization fields that are not included in the statement or that have DUMMY specified for them are not checked. If the check is successful, sy-subrc is set to 0. Otherwise, it is set to a value not equal to 0 (see below).
System Fields
sy-subrc Meaning
0 Authorization successful or no check was carried out. An authorization for the authorization object was found in the user master record. It's value sets include the specified values.
4 Authorization check not successful. One or several authorizations were indeed found for the authorization object in the user master record and they include the value sets, but not the values specified, or incorrect or too many authorization fields were specified.
12 No authorization was found for the authorization object in the user master record.
24 Incorrect authorization fields or an incorrect number of authorization fields was found. This return value is no longer set since Release 6.20. Up to Release 4.6 it is set only if the profile parameter "auth/new_buffering" has a value less than 3.
40 An invalid user ID has been entered in user.
Notes
The authorization fields of an authorization object are fields for data and a field with the name ACTVT for activities. Activities are represented by abbreviations with two characters that are defined in the ACTVT column of the database table TACT or have a customer-specific definition in TACTZ. Possible activities are assigned to the authorization field ACTVT in the authorization object. In the user master record, you have authorizations for data and activities in the form of operands for logical expressions stored as value sets. Here, masking characters can be used for generic authorizations.
When checking the authorization of the current user without the addition FOR USER, the content of the system field sy-uname is not evaluated, but the actual user name is used instead.
The most important contexts for which check indicators can be set are transactions. The execution of a statement AUTHORITY-CHECK can have different results depending on how the current program flow was started. In general, a check indicator should always been set to check.
For authorization objects of the areas SAP NW AS ABAP (BC) and human resources management (HR), a check indicator cannot be set to no check.
Addition
... FOR USER user
Example
Check as to whether the current user has the authorization required for displaying the airline that he specifies on the selection screen. The used authorization object is called S_CARRID and includes the authorization fields CARRID for the name of an airline and ACTVT for the activity. The abbreviation "03" stands for the "Display" activity and is one of the activities that are assigned to the authorization object S_CARRID.
PARAMETERS carr TYPE spfli-carrid.
AT SELECTION-SCREEN.
AUTHORITY-CHECK OBJECT 'S_CARRID'
ID 'CARRID' FIELD carr
ID 'ACTVT' FIELD '03'.
IF sy-subrc <> 0.
MESSAGE 'No authorization' TYPE 'E'.
ENDIF. -
Authorizations requirements for accessing ODS in Crystal
Hi,
is there any documentation on which authorizations are required on the SAP side for using the ODS driver in Crystal Report?
Regards,
StratosHi Ingo,
BW Query, Infoset and OpenSQL are listed but not the ODS driver.
Regards,
Stratos -
Pagefreezer... Authorization Required
Can any Forum readers help or forward this to a Verizon Rep? I Can’t find a valid Verizon Wireless EM addr to ask.
My rejected EM inquires follow.
Thanks!
MF
Private email information removed as required by the Terms of Service.
Message was edited by: Admin Moderatorhere it is again after re-re-editing!
Monkey Foot replied (in response to Monkey Foot) Less than a minute ago
Hi Ilse;
I have the same frustrations. It’s funny though, I keep getting ready to post this & I see another Ilse update come in! ;o) Thanks for these, they are good info & keep us users current.
Wow good timing, I just (well… 3 hrs ago now) got off a 45 min. fone call! Here is a story…
1. Had to call Verizon Cust Care, AFTER,
2. Having a 10 min. problem trying to get a response (at least a status!) from the fargin Live Chat function to work, AFTER,
3. Only getting one response EM from this forum stating “Private email information removed as required by the Terms of Service”, “This question is Not Answered” and “Message was edited by: Admin Moderator” Most of my original additional info is gone! Then “Verizon Customer Service no longer has an e-mail option; you can contact them via chat, phone, or social media. If you can elaborate on your issue, there may be forum members who can help.”, AFTER,
4. Not finding a Verizon email addr to send my question about the “pagefreezer... Authorization Required” issue.
OK, I got partial resolutions to some of this from the sweetheart lady at Verizon Cust Care, 1-800-922-0204, as follows;
1. The “pagefreezer... Authorization Required” thing; The lady rep tried it & got the same error as me. My "View Your Letters" showed 2 documents. One I could DL the other gave the “Authorization Required” error. I wanted them both & didn’t read the one I got yet since I wanted to read the “Terms & Conditions” right away, the one I couldn’t get. I had this same error after re-trying this function regularly for 2 days with no answer from Verizon peeps, or anyone, from this forum
While on the fone, the rep looked into my acct. for a minute, saw both documents & said, “Oh…. you can ignore that error message.” WHAT!!! (so far NOT such a sweetheart!). She then said that all the Terms & Conditions are also in the OTHER doc I already DLed. NOW she tells me!
I told her I wanted BOTH docs & wanted the error fixed. I asked her to report this error so it could be fixed & not affect me or any other users. She said no need since I have the info. Getting more annoyed, I insisted she report it & she finally agreed to as Tik # (removed).
Status may not be avail to everyone since that Tik # is an abbreviation of some of my info.
2. I also reported the chat problem to the Live Chat to Verizon Cust Care. She tried it & had the same problem as I, but her screen also displayed Chat Operation Hrs. & msgs that said chat reps are busy, which my display did not as I was doing it along with her. (She is NOW trying hard to help me). She couldn’t explain this since she was using her Customer Access acct (same auth & access as mine) & said I SHOULD see this info also, but I was not.
Then some chat categories started highlighting & de-highlighting as we watched, so it must be that their server, or the chatters, are busy now, probably the latter. She didn’t know.
So, she is adding this chat issue to the same Tik #.
3. Verizon Cust Care. Couldn’t help with my forum operation questions. Your replies arrived while I am typing this! Thanks!
4. No EM for reporting problems is a bad business decision for Support! (I DO know why this is, but it’s still bad cust. relations). They make us jump through hoops to get a problem fixed and in a way that details can be retained in writing, like EM or chat can. Forums can be OK, but have registrations, pswds, too many rules, and not as quick or easy or convenient as chat or EM. Using the fone goes in one ear & out the other with my memory. Saved EMs & chats are easy to refer back to.
OK, my rant is done. I hope my new Verizon Wireless service is better than this experience. The fone works fine so far, even rather GOOD!
I must commend Jermonni, the Verizon Cust Care rep. She did turn into a sweetheart after 30 min on the fone & after she saw for herself my problems were real. She gave me her full name & sent me her direct EM addr to check on the Tik status.
I’m happy your Authorization is now accepted, Ilse!
I was thinking my complaint may have accelerated the resolution since you reported it as fixed. The Cust rep said I was the first she knows about to complain & maybe her immed. report to Internet Support Group while I was on the fone might have been between your 1st & 2nd reply & fixed the problem.
But, I just got the error again now, 11/5/13, ____, so it’s not yet fixed for me. My error page is
http://cache.pagefreezer.com/browse/youreguide/01-11-2013T00:00/http://youreguide.vzw.com/. Yours is probably different, so that’s why it’s not fixed for me yet.
I hope YOUR error doesn’t return.
Call for the status of Tik # (removed), you may get resolution progress.
Best of luck!
Monkey Foot
(My real name is Jimmy Sue Cleveland Donkey Face)
This forum text editor stinks! Worse than Hotmail! I also keep getting "Internal server Error"! I had to reset the browser to clean out the Verizon garbage in there.to start again.
Comments edited as required by the Terms of Service.
Message was edited by: Admin Moderator -
The backup disk is not in Mac OS Extended (Journaled) format, which is required.
Kappy's extensive hard drive formatting post - http://discussions.apple.com/thread.jspa?messageID=8340551 - note that instructions at end are for zeroing data.
BDAqua's Formatting instructions - http://discussions.apple.com/message.jspa?messageID=8901255
Pondini: Formatting, Partitioning, Verifying, and Repairing Disks... - http://pondini.org/OSX/Home.html -
Content Server Error: 407 Proxy Authorization Required
Hi Experts,
I am new to Content Server and have recently installed Content Server 6.40 with MaxDB 7.8 database on a Windows 2008 server.
The installation completed successfully and IIS server was configured as per guide. The Content server is running when checked through URL on server.
Next, we created a new repository with following details, but are facing "HTTP error: 407 Proxy Authorization Required" while testing the connection.
Settings in OAC0
Content Rep. A1
Document Area: ArchiveLink
Storage type: HTTP Content Server
Version no.: 0046
HTTP server: <IP of Windows server where CS is intalled>
Port Number 1090
HTTP Script ContentServer/ContentServer
Transfer drctry C:\temp
HTTP Port 1090 is open from SAP system(HP-UX) to Content Server(windows) and there is no firewall between the 2 servers, but we still see the error in OAC0 and CSADMIN. I also tried setting the security parameter to 0 in contentserver.ini file, but that didn't help either.
The content server was installed using administrator user.
Would appreciate your inputs on what am I missing?
Thanks.
Regards,
VarunHi Varun,
Please change Document Area: ArchiveLink .
Remove Archive link and change it to Document Management system ( DMS)
Check the results and post the output.
Regards,
Deepak Kori -
I want to reinstall our Adobe Acrobat XI Pro because we have begun to get error messages. I followed the initial instructions but when I logged in I couldn't find "My Orders" page which is required to locate my order and install. Any ideas?
Barbara,
If you are looking for your serial number, sign in to your Adobe account. On the Manage Accounts page that appears, all of your registered products and their serial numbers are listed in the Plans & Products section. For more information on locating serial numbers,please see Find a serial number
Here is the link to download and install the software:
Acrobat XI, X
Pattie -
How to return "HTTP/1.0 401 Authorization Required" from OSB's Message Flow
How can I return "HTTP/1.0 401 Authorization Required" header from OSB's Message Flow?
Using of "HTTP Transport -> Authentification" is not possible, because I need flow condition. Transports Headers activity from design palette doesn't allow to send such headers.
Practical usage: request for kerberos ticket by sending two headers: 401 and WWW-Authenticate: Negotiate...Can you briefly expand the use case for better understanding?
HTTP Client---> Hand Shakes or what ever ----> HTTP Proxy (OSB )---> Pipeline----
Philosophy behind pipeline is that it is designed to work on the request. Correct me if I'm wrong.
What you are asking is ability to control the hand shake either in Pipeline or some way during proxy configuration. Unfortunately there is no configuration that is exposed for HTTP proxies in OSB to control that behavior.
Manoj -
HT4906 The backup disk is not in Mac OS Extended (Journaled) format, which is required.
Time Machine error!
The backup disk is not in Mac OS Extended (Journaled) format, which is required.
And what's Time Capsule?If you're trying to use Time Machine with an external hard drive the drive must be formatted OS X Extended (journaled);
So use Disk Utility to reformat the EHD and then open Time Machine and select the drive again.
OT -
CE10 ; Crystal_webcompserver : Log message: NT Authorization Required.
Post Author: gjmoyer
CA Forum: Administration
On our Crystal Enterprise 10 server. We are getting thousands of Warning messages logged to the Application event log from Crysal_webcompserver with description "Log message: NT Authorization Required."
What are these caused from, and how to I resolve this?Post Author: edoco
CA Forum: Administration
Having the same issue here...
The symptom was removed after restarting all services related to Crystal..
Seems to happen every few weeks.. Still investigating the actual problem.
gjmoyer:
On our Crystal Enterprise 10 server. We are getting thousands of Warning messages logged to the Application event log from Crysal_webcompserver with description "Log message: NT Authorization Required."
What are these caused from, and how to I resolve this? -
Purchasing new HP Photosmart printer which will require new OS X Mountain Lion driver, which installation steps do I take. Old printer still on iMac.
Hi Carol 22,
Thanks for the post. Depending upon the printer model, print drivers may be available from ASU. If not, then go to hp.com and download Mt. Lion drivers to your iMac. After you complete the hardware setup of the printer, if connecting wireless, then connect the printer to your network and then complete the installation and add the printer. Then you can go back and remove your old printer. I hope this helps...Good Luck!
I work for HP but my posts and replies are my own....Thank you! -
Authorization Required for RFC user in R/3-APO system.
Could you please help regarding one authorization issue. I want to know the authorization required for one RFC user. Now this RFC user used for RFC connection of SAP R/3 - SAP APO system. user type is given dialog type and SAP_ALL profile has been given to this user id. Now I have to remove SAP_ALL from this user id in R/3 and APO system and provide the required the authorization in R/3 and APO system.
Regard
AuroshikhaThe RFC authorisation depends completely on what the user is doing (ALEREMOTE?). We can't tell you what RFC auths your connection requires.
There is a guide to doing this here: https://wiki.sdn.sap.com/wiki/display/Security/BestPractice-HowtoanalyzeandsecureRFC+connections -
Hi, i am using SAP by Design in india. I am trying to get GL entry report in which i require a field "Approved by" but unable to find - please suggest.
Hi hanmant,
You could find GL Line item report under General ledger WOC => Reports => List=> G/L Line Item Report, but this report does not have filter parameter "Approved by".
May I know what was the use case behind "Approved by" field?
BR, Rakesh -
so we currently have three domain controllers set up, two of them on 2012r2 and one of them on 2008r2. prior to any of these domain controllers being added to the domain there was only one, running on 2003r2. the 2003r2 server was up and running when the
first 2012r2 was added and that's when running 'dcdiag /e /c /v' would yield an issue with "_ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local" in the DNS portion of the diagnostics, specifically:
TEST: Records registration (RReg)
Network Adapter [00000010] Microsoft Hyper-V Network Adapter:
Error:
Missing SRV record at DNS server 192.168.22.4:
_ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local
after adding the second 2012r2 to the domain, this issue is still there... adding the 2008r2 server to the domain and running BPA it gives the following:
Title:
This domain controller must register a DNS SRV resource record, which is required for replication to function correctly
Severity:
Error
Date:
7/3/2014 11:24:48 AM
Category:
Configuration
Issue:
The "DcByGuid" DNS service (SRV) resource record that advertises this server as an available domain controller in the domain and ensures correct replication is not registered. All domain controllers (but not RODCs) in the domain must register this record.
Impact:
Other member computers and domain controllers in the domain or forest will not be able to locate this domain controller. This domain controller will not be able to provide a full suite of services.
Resolution:
Ensure that "DcByGuid" is not configured in the "DnsAvoidRegisteredRecords" list, either through Group Policy or through the registry. Restart the Netlogon service. Verify that the DNS service (SRV) resource record "_ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local", pointing to the local domain controller "CM-DC4-NY01.cmedia.local", is registered in DNS.
More information about this best practice and detailed resolution procedures: http://go.microsoft.com/fwlink/?LinkId=126968
I've tried scanning and then re-scanning every single entry in DNS Manager and do not see any reference to this specific GUID mentioned, nor do I see any other domain controllers referenced that should not be in there. The two 2012r2 and the 2008r2 domain
controllers are the only ones listed in DNS Manager... the 2003r2 mentioned earlier failed and was removed.Just to chime in, I noticed that you said you have one 2008 R2 DC, and two 2012 DCs.
I also noticed in the ipconfig /all that all DCs are pointint to themselves for DNS. We usually like to see them point to a partner, then itslelf as the second entry, w hether loopback or by its own IP.
Based on that, what I suggest to level the playing field by choosing the WIndows 2008 R2 DC as the first DNS on all DCs and only administer DNS using that DC. The reason I chose that is because of the least common denominator is what we rather use so we
don't invoke any new features in the newer 2012 DNS console that 2008 R2 may not understand. After that's done, on each DC run (and you can use a PowerShell window to run this):
Rename the system32\config\netlogon.dns and netlogon.dnb files by suffixing ".old" to the file.
ipconfig /registerdns
net stop netlogon
net start netlogon
Then re-run the dcdiag /e /c /v.
Post your results, please.
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.
I thought the DNS entries were supposed to be the other way around? point to themselves first and a partner as secondary? regardless, as requested, I've changed it to what you've prescribed where they point to the 2008r2 server as the primary with themselves
as the secondary. I've also followed the steps to what seems like refreshing the DNS? on each of the DCs. Here's the output from dcdiag /e /c /v
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
* Verifying that the local machine CM-DC1-NY01, is a Directory Server.
Home Server = CM-DC1-NY01
* Connecting to directory service on server CM-DC1-NY01.
* Identified AD Forest.
Collecting AD specific global data
* Collecting site info.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=cmedia,DC=local,LDAP_SCOPE_SUBTREE,(objectCategory
=ntDSSiteSettings),.......
The previous call succeeded
Iterating through the sites
Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=cmedia
,DC=local
Getting ISTG and options for the site
* Identifying all servers.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=cmedia,DC=local,LDAP_SCOPE_SUBTREE,(objectClass=nt
DSDsa),.......
The previous call succeeded....
The previous call succeeded
Iterating through the list of servers
Getting information for the server CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites
,CN=Configuration,DC=cmedia,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=CM-DC3-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites
,CN=Configuration,DC=cmedia,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=CM-DC4-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites
,CN=Configuration,DC=cmedia,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
* Identifying all NC cross-refs.
* Found 3 DC(s). Testing 3 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\CM-DC1-NY01
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
* Active Directory RPC Services Check
......................... CM-DC1-NY01 passed test Connectivity
Testing server: Default-First-Site-Name\CM-DC3-NY01
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
* Active Directory RPC Services Check
......................... CM-DC3-NY01 passed test Connectivity
Testing server: Default-First-Site-Name\CM-DC4-NY01
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
* Active Directory RPC Services Check
......................... CM-DC4-NY01 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\CM-DC1-NY01
Starting test: Advertising
The DC CM-DC1-NY01 is advertising itself as a DC and having a DS.
The DC CM-DC1-NY01 is advertising as an LDAP server
The DC CM-DC1-NY01 is advertising as having a writeable directory
The DC CM-DC1-NY01 is advertising as a Key Distribution Center
The DC CM-DC1-NY01 is advertising as a time server
The DS CM-DC1-NY01 is advertising as a GC.
......................... CM-DC1-NY01 passed test Advertising
Starting test: CheckSecurityError
* Dr Auth: Beginning security errors check!
Found KDC CM-DC1-NY01 for domain cmedia.local in site Default-First-Site-Name
Checking machine account for DC CM-DC1-NY01 on DC CM-DC1-NY01.
* SPN found :LDAP/CM-DC1-NY01.cmedia.local/cmedia.local
* SPN found :LDAP/CM-DC1-NY01.cmedia.local
* SPN found :LDAP/CM-DC1-NY01
* SPN found :LDAP/CM-DC1-NY01.cmedia.local/cmedia
* SPN found :LDAP/a29d12f1-2869-44bf-8e43-adf7ddf33865._msdcs.cmedia.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/a29d12f1-2869-44bf-8e43-adf7ddf33865/cmedia.local
* SPN found :HOST/CM-DC1-NY01.cmedia.local/cmedia.local
* SPN found :HOST/CM-DC1-NY01.cmedia.local
* SPN found :HOST/CM-DC1-NY01
* SPN found :GC/CM-DC1-NY01.cmedia.local/cmedia.local
[CM-DC1-NY01] No security related replication errors were found on this DC! To target the connection to a
specific source DC use /ReplSource:<DC>.
......................... CM-DC1-NY01 passed test CheckSecurityError
Starting test: CutoffServers
* Configuration Topology Aliveness Check
* Analyzing the alive system replication topology for DC=ForestDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=DomainDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... CM-DC1-NY01 passed test CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
......................... CM-DC1-NY01 passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
Skip the test because the server is running FRS.
......................... CM-DC1-NY01 passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... CM-DC1-NY01 passed test SysVolCheck
Starting test: FrsSysVol
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... CM-DC1-NY01 passed test FrsSysVol
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... CM-DC1-NY01 passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
guration,DC=cmedia,DC=local
Role Domain Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
guration,DC=cmedia,DC=local
Role PDC Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
ation,DC=cmedia,DC=local
Role Rid Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
ation,DC=cmedia,DC=local
Role Infrastructure Update Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN
=Sites,CN=Configuration,DC=cmedia,DC=local
......................... CM-DC1-NY01 passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC CM-DC1-NY01 on DC CM-DC1-NY01.
* SPN found :LDAP/CM-DC1-NY01.cmedia.local/cmedia.local
* SPN found :LDAP/CM-DC1-NY01.cmedia.local
* SPN found :LDAP/CM-DC1-NY01
* SPN found :LDAP/CM-DC1-NY01.cmedia.local/cmedia
* SPN found :LDAP/a29d12f1-2869-44bf-8e43-adf7ddf33865._msdcs.cmedia.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/a29d12f1-2869-44bf-8e43-adf7ddf33865/cmedia.local
* SPN found :HOST/CM-DC1-NY01.cmedia.local/cmedia.local
* SPN found :HOST/CM-DC1-NY01.cmedia.local
* SPN found :HOST/CM-DC1-NY01
* SPN found :HOST/CM-DC1-NY01.cmedia.local/cmedia
* SPN found :GC/CM-DC1-NY01.cmedia.local/cmedia.local
......................... CM-DC1-NY01 passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC CM-DC1-NY01.
The forest is not ready for RODC. Will skip checking ERODC ACEs.
* Security Permissions Check for
DC=ForestDnsZones,DC=cmedia,DC=local
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=cmedia,DC=local
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=cmedia,DC=local
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=cmedia,DC=local
(Configuration,Version 3)
* Security Permissions Check for
DC=cmedia,DC=local
(Domain,Version 3)
......................... CM-DC1-NY01 passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\CM-DC1-NY01\netlogon
Verified share \\CM-DC1-NY01\sysvol
......................... CM-DC1-NY01 passed test NetLogons
Starting test: ObjectsReplicated
CM-DC1-NY01 is in domain DC=cmedia,DC=local
Checking for CN=CM-DC1-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
n 3 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuratio
n,DC=cmedia,DC=local in domain CN=Configuration,DC=cmedia,DC=local on 3 servers
Object is up-to-date on all servers.
......................... CM-DC1-NY01 passed test ObjectsReplicated
Starting test: OutboundSecureChannels
* The Outbound Secure Channels test
** Did not run Outbound Secure Channels test because /testdomain: was not entered
......................... CM-DC1-NY01 passed test OutboundSecureChannels
Starting test: Replications
* Replications Check
* Replication Latency Check
DC=ForestDnsZones,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=DomainDnsZones,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Schema,CN=Configuration,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Configuration,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
......................... CM-DC1-NY01 passed test Replications
Starting test: RidManager
* Available RID Pool for the Domain is 16109 to 1073741823
* CM-DC1-NY01.cmedia.local is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 4609 to 5108
* rIDPreviousAllocationPool is 4609 to 5108
* rIDNextRID: 4629
......................... CM-DC1-NY01 passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: NtFrs
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... CM-DC1-NY01 passed test Services
Starting test: SystemLog
* The System Event log test
A warning event occurred. EventID: 0x0000002F
Time Generated: 07/08/2014 13:19:14
Event String:
Time Provider NtpClient: No valid response has been received from manually configured peer 0.ca.pool.ntp.org
after 8 attempts to contact it. This peer will be discarded as a time source and NtpClient will attempt to discover a n
ew peer with this DNS name. The error was: The peer is unreachable.
Found no errors in "System" Event log in the last 60 minutes.
......................... CM-DC1-NY01 passed test SystemLog
Starting test: Topology
* Configuration Topology Integrity Check
* Analyzing the connection topology for DC=ForestDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=DomainDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... CM-DC1-NY01 passed test Topology
Starting test: VerifyEnterpriseReferences
......................... CM-DC1-NY01 passed test VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference) CN=CM-DC1-NY01,OU=Domain Controllers,DC=cmedia,DC=local
and backlink on
CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=cmedia,DC=local are
correct.
The system object reference (serverReferenceBL)
CN=CM-DC1-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
C=local
and backlink on
CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chiefmed
ia,DC=local
are correct.
The system object reference (frsComputerReferenceBL)
CN=CM-DC1-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
C=local
and backlink on CN=CM-DC1-NY01,OU=Domain Controllers,DC=cmedia,DC=local are correct.
......................... CM-DC1-NY01 passed test VerifyReferences
Starting test: VerifyReplicas
......................... CM-DC1-NY01 passed test VerifyReplicas
Testing server: Default-First-Site-Name\CM-DC3-NY01
Starting test: Advertising
The DC CM-DC3-NY01 is advertising itself as a DC and having a DS.
The DC CM-DC3-NY01 is advertising as an LDAP server
The DC CM-DC3-NY01 is advertising as having a writeable directory
The DC CM-DC3-NY01 is advertising as a Key Distribution Center
The DC CM-DC3-NY01 is advertising as a time server
The DS CM-DC3-NY01 is advertising as a GC.
......................... CM-DC3-NY01 passed test Advertising
Starting test: CheckSecurityError
* Dr Auth: Beginning security errors check!
Found KDC CM-DC1-NY01 for domain cmedia.local in site Default-First-Site-Name
Checking machine account for DC CM-DC3-NY01 on DC CM-DC1-NY01.
* SPN found :LDAP/CM-DC3-NY01.cmedia.local/cmedia.local
* SPN found :LDAP/CM-DC3-NY01.cmedia.local
* SPN found :LDAP/CM-DC3-NY01
* SPN found :LDAP/CM-DC3-NY01.cmedia.local/cmedia
* SPN found :LDAP/5e9d1971-39ca-484c-922d-411c2364c96e._msdcs.cmedia.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/5e9d1971-39ca-484c-922d-411c2364c96e/cmedia.local
* SPN found :HOST/CM-DC3-NY01.cmedia.local/cmedia.local
* SPN found :HOST/CM-DC3-NY01.cmedia.local
* SPN found :HOST/CM-DC3-NY01
* SPN found :HOST/CM-DC3-NY01.cmedia.local/cmedia
* SPN found :GC/CM-DC3-NY01.cmedia.local/cmedia.local
Checking for CN=CM-DC3-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
n 2 servers
Object is up-to-date on all servers.
[CM-DC3-NY01] No security related replication errors were found on this DC! To target the connection to a
specific source DC use /ReplSource:<DC>.
......................... CM-DC3-NY01 passed test CheckSecurityError
Starting test: CutoffServers
* Configuration Topology Aliveness Check
* Analyzing the alive system replication topology for DC=ForestDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=DomainDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... CM-DC3-NY01 passed test CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
......................... CM-DC3-NY01 passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
Skip the test because the server is running FRS.
......................... CM-DC3-NY01 passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... CM-DC3-NY01 passed test SysVolCheck
Starting test: FrsSysVol
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... CM-DC3-NY01 passed test FrsSysVol
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... CM-DC3-NY01 passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
guration,DC=cmedia,DC=local
Role Domain Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
guration,DC=cmedia,DC=local
Role PDC Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
ation,DC=cmedia,DC=local
Role Rid Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
ation,DC=cmedia,DC=local
Role Infrastructure Update Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN
=Sites,CN=Configuration,DC=cmedia,DC=local
......................... CM-DC3-NY01 passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC CM-DC3-NY01 on DC CM-DC3-NY01.
* SPN found :LDAP/CM-DC3-NY01.cmedia.local/cmedia.local
* SPN found :LDAP/CM-DC3-NY01.cmedia.local
* SPN found :LDAP/CM-DC3-NY01
* SPN found :LDAP/CM-DC3-NY01.cmedia.local/cmedia
* SPN found :LDAP/5e9d1971-39ca-484c-922d-411c2364c96e._msdcs.cmedia.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/5e9d1971-39ca-484c-922d-411c2364c96e/cmedia.local
* SPN found :HOST/CM-DC3-NY01.cmedia.local/cmedia.local
* SPN found :HOST/CM-DC3-NY01.cmedia.local
* SPN found :HOST/CM-DC3-NY01
* SPN found :HOST/CM-DC3-NY01.cmedia.local/cmedia
* SPN found :GC/CM-DC3-NY01.cmedia.local/cmedia.local
......................... CM-DC3-NY01 passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC CM-DC3-NY01.
The forest is not ready for RODC. Will skip checking ERODC ACEs.
* Security Permissions Check for
DC=ForestDnsZones,DC=cmedia,DC=local
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=cmedia,DC=local
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=cmedia,DC=local
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=cmedia,DC=local
(Configuration,Version 3)
* Security Permissions Check for
DC=cmedia,DC=local
(Domain,Version 3)
......................... CM-DC3-NY01 passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\CM-DC3-NY01\netlogon
Verified share \\CM-DC3-NY01\sysvol
......................... CM-DC3-NY01 passed test NetLogons
Starting test: ObjectsReplicated
CM-DC3-NY01 is in domain DC=cmedia,DC=local
Checking for CN=CM-DC3-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
n 3 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=CM-DC3-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuratio
n,DC=cmedia,DC=local in domain CN=Configuration,DC=cmedia,DC=local on 3 servers
Object is up-to-date on all servers.
......................... CM-DC3-NY01 passed test ObjectsReplicated
Starting test: OutboundSecureChannels
* The Outbound Secure Channels test
** Did not run Outbound Secure Channels test because /testdomain: was not entered
......................... CM-DC3-NY01 passed test OutboundSecureChannels
Starting test: Replications
* Replications Check
* Replication Latency Check
DC=ForestDnsZones,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=DomainDnsZones,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Schema,CN=Configuration,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Configuration,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
......................... CM-DC3-NY01 passed test Replications
Starting test: RidManager
* Available RID Pool for the Domain is 16109 to 1073741823
* CM-DC1-NY01.cmedia.local is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 15109 to 15608
* rIDPreviousAllocationPool is 15109 to 15608
* rIDNextRID: 15110
......................... CM-DC3-NY01 passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: NtFrs
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... CM-DC3-NY01 passed test Services
Starting test: SystemLog
* The System Event log test
Found no errors in "System" Event log in the last 60 minutes.
......................... CM-DC3-NY01 passed test SystemLog
Starting test: Topology
* Configuration Topology Integrity Check
* Analyzing the connection topology for DC=ForestDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=DomainDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... CM-DC3-NY01 passed test Topology
Starting test: VerifyEnterpriseReferences
......................... CM-DC3-NY01 passed test VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference) CN=CM-DC3-NY01,OU=Domain Controllers,DC=cmedia,DC=local
and backlink on
CN=CM-DC3-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=cmedia,DC=local are
correct.
The system object reference (serverReferenceBL)
CN=CM-DC3-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
C=local
and backlink on
CN=NTDS Settings,CN=CM-DC3-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chiefmed
ia,DC=local
are correct.
The system object reference (frsComputerReferenceBL)
CN=CM-DC3-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
C=local
and backlink on CN=CM-DC3-NY01,OU=Domain Controllers,DC=cmedia,DC=local are correct.
......................... CM-DC3-NY01 passed test VerifyReferences
Starting test: VerifyReplicas
......................... CM-DC3-NY01 passed test VerifyReplicas
Testing server: Default-First-Site-Name\CM-DC4-NY01
Starting test: Advertising
The DC CM-DC4-NY01 is advertising itself as a DC and having a DS.
The DC CM-DC4-NY01 is advertising as an LDAP server
The DC CM-DC4-NY01 is advertising as having a writeable directory
The DC CM-DC4-NY01 is advertising as a Key Distribution Center
The DC CM-DC4-NY01 is advertising as a time server
The DS CM-DC4-NY01 is advertising as a GC.
......................... CM-DC4-NY01 passed test Advertising
Starting test: CheckSecurityError
* Dr Auth: Beginning security errors check!
Found KDC CM-DC1-NY01 for domain cmedia.local in site Default-First-Site-Name
Checking machine account for DC CM-DC4-NY01 on DC CM-DC1-NY01.
* SPN found :LDAP/CM-DC4-NY01.cmedia.local/cmedia.local
* SPN found :LDAP/CM-DC4-NY01.cmedia.local
* SPN found :LDAP/CM-DC4-NY01
* SPN found :LDAP/CM-DC4-NY01.cmedia.local/cmedia
* SPN found :LDAP/37830012-1f10-43c9-a0ff-2a0e8a912187._msdcs.cmedia.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/37830012-1f10-43c9-a0ff-2a0e8a912187/cmedia.local
* SPN found :HOST/CM-DC4-NY01.cmedia.local/cmedia.local
* SPN found :HOST/CM-DC4-NY01.cmedia.local
* SPN found :HOST/CM-DC4-NY01
* SPN found :HOST/CM-DC4-NY01.cmedia.local/cmedia
* SPN found :GC/CM-DC4-NY01.cmedia.local/cmedia.local
Checking for CN=CM-DC4-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
n 2 servers
Object is up-to-date on all servers.
[CM-DC4-NY01] No security related replication errors were found on this DC! To target the connection to a
specific source DC use /ReplSource:<DC>.
......................... CM-DC4-NY01 passed test CheckSecurityError
Starting test: CutoffServers
* Configuration Topology Aliveness Check
* Analyzing the alive system replication topology for DC=ForestDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=DomainDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... CM-DC4-NY01 passed test CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
......................... CM-DC4-NY01 passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
Skip the test because the server is running FRS.
......................... CM-DC4-NY01 passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... CM-DC4-NY01 passed test SysVolCheck
Starting test: FrsSysVol
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... CM-DC4-NY01 passed test FrsSysVol
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... CM-DC4-NY01 passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
guration,DC=cmedia,DC=local
Role Domain Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
guration,DC=cmedia,DC=local
Role PDC Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
ation,DC=cmedia,DC=local
Role Rid Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
ation,DC=cmedia,DC=local
Role Infrastructure Update Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN
=Sites,CN=Configuration,DC=cmedia,DC=local
......................... CM-DC4-NY01 passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC CM-DC4-NY01 on DC CM-DC4-NY01.
* SPN found :LDAP/CM-DC4-NY01.cmedia.local/cmedia.local
* SPN found :LDAP/CM-DC4-NY01.cmedia.local
* SPN found :LDAP/CM-DC4-NY01
* SPN found :LDAP/CM-DC4-NY01.cmedia.local/cmedia
* SPN found :LDAP/37830012-1f10-43c9-a0ff-2a0e8a912187._msdcs.cmedia.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/37830012-1f10-43c9-a0ff-2a0e8a912187/cmedia.local
* SPN found :HOST/CM-DC4-NY01.cmedia.local/cmedia.local
* SPN found :HOST/CM-DC4-NY01.cmedia.local
* SPN found :HOST/CM-DC4-NY01
* SPN found :HOST/CM-DC4-NY01.cmedia.local/cmedia
* SPN found :GC/CM-DC4-NY01.cmedia.local/cmedia.local
......................... CM-DC4-NY01 passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC CM-DC4-NY01.
The forest is not ready for RODC. Will skip checking ERODC ACEs.
* Security Permissions Check for
DC=ForestDnsZones,DC=cmedia,DC=local
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=cmedia,DC=local
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=cmedia,DC=local
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=cmedia,DC=local
(Configuration,Version 3)
* Security Permissions Check for
DC=cmedia,DC=local
(Domain,Version 3)
......................... CM-DC4-NY01 passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\CM-DC4-NY01\netlogon
Verified share \\CM-DC4-NY01\sysvol
......................... CM-DC4-NY01 passed test NetLogons
Starting test: ObjectsReplicated
CM-DC4-NY01 is in domain DC=cmedia,DC=local
Checking for CN=CM-DC4-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
n 3 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=CM-DC4-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuratio
n,DC=cmedia,DC=local in domain CN=Configuration,DC=cmedia,DC=local on 3 servers
Object is up-to-date on all servers.
......................... CM-DC4-NY01 passed test ObjectsReplicated
Starting test: OutboundSecureChannels
* The Outbound Secure Channels test
** Did not run Outbound Secure Channels test because /testdomain: was not entered
......................... CM-DC4-NY01 passed test OutboundSecureChannels
Starting test: Replications
* Replications Check
* Replication Latency Check
DC=ForestDnsZones,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=DomainDnsZones,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Schema,CN=Configuration,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Configuration,DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=cmedia,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
no longer replicating this nc. 0 had no latency information (Win2K DC).
......................... CM-DC4-NY01 passed test Replications
Starting test: RidManager
* Available RID Pool for the Domain is 16109 to 1073741823
* CM-DC1-NY01.cmedia.local is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 15609 to 16108
* rIDPreviousAllocationPool is 15609 to 16108
* rIDNextRID: 15609
......................... CM-DC4-NY01 passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: NtFrs
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... CM-DC4-NY01 passed test Services
Starting test: SystemLog
* The System Event log test
Found no errors in "System" Event log in the last 60 minutes.
......................... CM-DC4-NY01 passed test SystemLog
Starting test: Topology
* Configuration Topology Integrity Check
* Analyzing the connection topology for DC=ForestDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=DomainDnsZones,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Configuration,DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=cmedia,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... CM-DC4-NY01 passed test Topology
Starting test: VerifyEnterpriseReferences
......................... CM-DC4-NY01 passed test VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference) CN=CM-DC4-NY01,OU=Domain Controllers,DC=cmedia,DC=local
and backlink on
CN=CM-DC4-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=cmedia,DC=local are
correct.
The system object reference (serverReferenceBL)
CN=CM-DC4-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
C=local
and backlink on
CN=NTDS Settings,CN=CM-DC4-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chiefmed
ia,DC=local
are correct.
The system object reference (frsComputerReferenceBL)
CN=CM-DC4-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
C=local
and backlink on CN=CM-DC4-NY01,OU=Domain Controllers,DC=cmedia,DC=local are correct.
......................... CM-DC4-NY01 passed test VerifyReferences
Starting test: VerifyReplicas
......................... CM-DC4-NY01 passed test VerifyReplicas -
i forgot the answer to my security question which was required by apple to purches an app.. i would appricate any advice on what i should do.
thank you.
Truong Thanh CongI had this same problem.
Go to http://expresslane.apple.com.
hit iTunes
hit itunes store
hit account management
hit forgotten AppleID security questions.
hit continue and enter your phone number
apple support will call you and guide you through the reset process
Maybe you are looking for
-
How do you fix the audio from drifting sync on DV footage?
I know there has been some discussion about this, but the solution doesn't really make sense. Basically, I am having a huge problem with audio sync on anything shot on MiniDV. Sometimes the footage will pop at the beginning and the footage will im
-
I connected my friends ipod to my laptop whilst I was playing some songs and closed whatever came up on the screen from itunes. Next thing I know his ipod has been wiped and we can't find his music. How do we get his music back? He hasn't got his lap
-
BLOB JDBC/OCI8 and dbms_lob.read
Hi, using dbms_lob.read() to retrieve a BLOB with JDBC/OCI8 we cannot use a chunk larger than 255. If we try, we get a 21560 error. Any idea? Thanks Herve null
-
Dynamic update of text from JTree manipulation
Hi I working on an application that uses both a JTree and text view at the same time. What I want to do is everytime a node is added/edited/removed from the JTree the text for that node is dynamically updated in the tree view. At the moment what I do
-
Impossibility to send a fax after upgrade to 10.6
Hello, I've just upgraded to 10.6.2 from 10.4.11 and the "send fax" function via the external Mac modem ("MA034") doesn't work ("receive" is OK). The error message is cupsRasterInterpretPPD had an error: Unknown operator "level2"! My local Apple deal