Which BIO is in your K8T800 Master 2-FAR?

There appears to be a variety of BIO flavors out there:
1.0
1.1
1.14b
1.2
What is your flavor of BIOS and PROS and CONS for using it?

Funny, just discovered I have 2 CoreCenters Pro installed....one with and one without.....
The one with is installed as "CorenterPro", the one without is installed as "Corenter Pro"
The version that does have DOT is from 3-12-2003....very funny

Similar Messages

MASTER-2 FAR BIOS (ms-9130)

I'm having stability problems (SATA drives locking up) with the K8T MASTER-2 FAR (ms-9130) and I can't seem to find the latest bios on the MSI website.
My BIOS id: W9130MS V1.3 071304
Latest BIOS on MSI website is appears to be older than what I'm using:
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=484&kind=3
Could the MASTER-2 FAR7 bios be compatible with the MASTER-2 FAR; VIA K8T800Pro vs. K8T800?
Thanks for your time,
Lawrence

Nope, those BIOS'ses are NOT the same, do not go there!
Anyway, what else is in your system, as it could be anything, doesn't have to be the drive's.
Could be well the powersupply or something else.
Also, why do you thing the sata drive's lockup?
Please list the system as detailed as you can.

Which Technology was selected then creating Master Repository for ODI?

Hi,
Which Technology was selected then creating Master Repository for ODI SQL Server 2003? Which technolgy must be selected?
First of all I created master repository for ODI on SQL Server 2003 via Microsoft SQL Server, it did not work.
I checked the Driver and URL as below
com.microsoft.sqlserver.jdbc.SQLServerDriver
jdbc:sqlserver://<servername>:<PortNumber>;selectMthod=cursor;databasename=<databasename>;integratedsecurity=false
there is a error as below
com.sunopsis.tools.core.exception.SnpsRuntimeException: com.sunopsis.tools.core.exception.SnpsRuntimeException: Unable to find the XML file corresponding to your technology.
     at oracle.odi.sdk.repository.OdiRepositoryManager.createMasterRepository(OdiRepositoryManager.java)
     at com.sunopsis.wizards.MasterRepositoryWizard.d(MasterRepositoryWizard.java)
     at com.sunopsis.wizards.MasterRepositoryWizard.f(MasterRepositoryWizard.java)
     at com.sunopsis.wizards.MasterRepositoryWizard.a(MasterRepositoryWizard.java)
     at com.sunopsis.wizards.MasterRepositoryWizard.a(MasterRepositoryWizard.java)
     at com.sunopsis.wizards.MasterRepositoryWizard$IvjEventHandler.actionPerformed(MasterRepositoryWizard.java)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
Caused by: com.sunopsis.tools.core.exception.SnpsRuntimeException: Unable to find the XML file corresponding to your technology.
     at com.sunopsis.repository.manager.RepositoryManager.masterRepositoryCreation(RepositoryManager.java)
     ... 29 more
Caused by:
com.sunopsis.tools.core.exception.SnpsRuntimeException: Unable to find the XML file corresponding to your technology.
     at com.sunopsis.repository.manager.RepositoryManager.masterRepositoryCreation(RepositoryManager.java)
     at oracle.odi.sdk.repository.OdiRepositoryManager.createMasterRepository(OdiRepositoryManager.java)
     at com.sunopsis.wizards.MasterRepositoryWizard.d(MasterRepositoryWizard.java)
     at com.sunopsis.wizards.MasterRepositoryWizard.f(MasterRepositoryWizard.java)
     at com.sunopsis.wizards.MasterRepositoryWizard.a(MasterRepositoryWizard.java)
     at com.sunopsis.wizards.MasterRepositoryWizard.a(MasterRepositoryWizard.java)
     at com.sunopsis.wizards.MasterRepositoryWizard$IvjEventHandler.actionPerformed(MasterRepositoryWizard.java)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
okan
Edited by: ankist on Jan 15, 2010 2:46 PM

It is highly recommended to use the JDBC Driver for SQL Server 2005, even if you are using SQL Server 2000. In ODI's pre-populated lists, it is not there - you will have to (1) get the driver yourself, downloadable from the Microsoft site. (get the driver v1.2, not the 2.0, and use a JRE v1.5, 1.5 or 1.6. The 2.0 driver from Microsoft requires the JRE 1.6)
(2) use the
Driver: com.microsoft.sqlserver.jdbc.SQLServerDriver
and the URL: jdbc:sqlserver://<myserver>:<myport, default 1433>;database=<mydb>;selectMethod=cursor
these are not automatic, you will need to type them in.
The database must be configured for connections from tcpip.
For more information see the blog: http://odiexperts.com/?tag=sql-server-2005

Why am I unable to delete the default track (which seems to act as the master, right?) after making a rough mix? Is it possible to delete the default track after having rendered a mix?

Why am I unable to delete the default track (which seems to act as the master, right?) after making a rough mix? Is it possible to delete the default track after having rendered a mix? I did a rough mix and now cannot change the song as the tracks that were a part of the rough mix seem to remain in the song even though I mute the tracks for a new mix. For instance, I played and recorded a different bass line. Muted the original, but when trying to create the new mix I can hear the original bass line even though I have muted that track. It seems to remain in the previous master (default) track. Please send help. Thank you.

Before answering your question, you have to make sure you understand the difference between the different track types in GarageBand.
Tracks, you record your music on
There are three types of those Tracks.
MIDI Tracks (aka Software Instrument Tracks)
Audio Tracks (aka Real Instrument Tracks)
Drummer Track (only one per Project)
Global Tracks
These are the Tracks that can be shown/hidden at the top of the Tracks Area for specific purposes.
Arrangement Track
Movie Track
Transposition Track
Tempo Track
Master Track
This Track can also be shown/hidden in the Tracks Area. Please note, you cannot delete that Track, only hide it, similar to the Global Tracks
Regarding the Tracks you record your music on, you can delete any of those. It doesn't matter if you created them or there are part of a Template (maybe that is what you refer to as the default track). Once you delete the last Track, the "New Track Window" will pop up to add a new track.
I will explain all that in much more detail in my manual "GarageBand X - How it Works".
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

K8T Master 2 FAR dual Opteron 250 Vista 64bit BIOS 1.4 only 1 CPU show!!! Help!!

Hi,
I am new to this forum but had been working on this problems for a week!
Here my system:
MSI K8t Master 2 FAR
ECC ram 2GB
Dual Opteron 250 replaced the dual Opteron 242 one week ago
BIOS upgrade to 1.4
Window Vista 64bit from Window XP Pro
The POST, Device Manager detect two new CPUs. However, there are only one CPU being utilize in task manager (yes, I have check one graph per CPU). It appear from the forum that BIOS 1.35B5? would work but I could not find it. Try to install Window XP Pro but failed (flopppy drive does not work).
Any help and suggestion would be greatly appreciated!
Wai

No options after slash "/"?
Quote from: BOSSKILLER on 14-August-08, 19:42:45
Does it worked before to update BIOS to 1.4?
Quote from: Wai on 15-August-08, 06:55:42
With BIOS 1.1 and dual Opteron 242, I have both CPU work as shown by Device manager and task manager (two CPU graphs). I can only get one CPU work since I upgrade to Opteron 250 and BIOS 1.4. Unfortunately BIOS 1.1 do not support Opteron 250.
Wai
Check this topic:
https://forum-en.msi.com/index.php?topic=90059.0
"Running 2 CPU's will show just 1 CPU in the Opterating system, was reported by a user."
Quote from: Lord Anubis on 01-June-08, 21:22:00
has anyone tried the new v1.40 bios released 2008-04-10 for this board?
http://global.msi.com.tw/index.php?func=downloaddetail&type=bios&maincat_no=133&prod_no=675
Quote from: slava_b on 17-June-08, 16:02:30
I tried. More stable then 1.47, but not fully workable. Second CPU dont work, Smart fan dont work, if 4Gb installed -> CPU kernel time load 60-70% permanently. Last stable workable release is 1.35, but i have slow down if install LSI 21320R.
1.35 appear to be last stable version reported by users
Quote from: Wai on 10-August-08, 23:21:53
It appear from the forum that BIOS 1.35B5? would work but I could not find it.
Here is it:
https://forum-en.msi.com/index.php?action=dlattach;topic=90059.0;attach=1707
Change Log, your CPU is supported as well:
2. Added Feature:
(a)support new Opteron 250 CPUs
Flash at own risk

Which BIOS for Corsair 3200XLPT??

Hi guys, is there anyone using the Corsair PC3200XLPT here, I really like to know which BIOS is the most stable with these ram?? Right now I'm using Bios 1.52 but somehow I'd always got BSOD with these ram installed, all running at SPD, but even at lower timing 2-3-7-3, these ram still gave me troubles. And now my WinXP became corrupt . . . .
Any clue please ??? or perhaps I've to rma these ram??

There is a real difference between Corsair XL and C2 memory:
http://www.corsairmicro.com/corsair/xms.html
The XL should run at 2-2-2-5 1T at stock memory frequencies and even a bit beyond. I'd set the memory to those specs and run memtest86 for an extended period to make sure the hardware was working as it should be before doing anything else. If this generates errors then you definitely have a hardware problem but it may not be your memory. See Tiresmoke's excellent sticky above.
And whatever you do, don't even thing about changing the BIOS until you have a stable hardware platform and are running XP with absolutely no major problems.

K8t master 2 far - Bios PChealth 2nd cpu no temp reading?

Hi ya all, Ive just got myself the MS 9130 (was supposed to be the Master 2 far 7, but was sent the older Master 2 far) anyways, great to be here.
Its currently populated with 2 opty 240's and also with 2x1 gig of ecc ddr400 ram. Boots fine and all that.
Couple of questions...
1. when boots, it displays the Bios as being V1.3 071304 which is fine, i know the latest bios is 1.4 (as on the MSI site) however, is it worthwile updating to the latest bios (i have 2x250 optys coming in the post later on in the week) Does the V1.3 bios have the micro code to support the 250?
2. In the bios itself, under "PC heath" it doesnt show me what the temp for CPU2 is, it does however nicely show what it is for CPU1 (stable at 40 degrees c) surely it should show what the temp for cpu2 is right?
Could this have something to do with how tight you screw down the cpu2 cooler? (next to the AGP slot) how much should you screw that one down?
3. Also, Vin2 is shows as -12.77v is that right?
Iam using an enermax Liberty 620W psu to power the show, 24pin in the Powerplug and a combo 8 pin plug in Jpwr1
kind regards and thanks for any help
cheers

Quote from: vanne on 17-October-08, 10:29:55
1. when boots, it displays the Bios as being V1.3 071304 which is fine, i know the latest bios is 1.4 (as on the MSI site) however, is it worthwile updating to the latest bios (i have 2x250 optys coming in the post later on in the week) Does the V1.3 bios have the micro code to support the 250?
Best BIOS is 1.3B5, however, this board only support the 130nm Opterons...if those 250's are 90nm they will not work...
Not a BIOS matter but a regulator matter.
Quote
2. In the bios itself, under "PC heath" it doesnt show me what the temp for CPU2 is, it does however nicely show what it is for CPU1 (stable at 40 degrees c) surely it should show what the temp for cpu2 is right?
Yes it should, maybe the CPU's heatsensor is broken.
Quote
Could this have something to do with how tight you screw down the cpu2 cooler? (next to the AGP slot) how much should you screw that one down?
Might be, but normaly not, unless you use coolers that bend the board.
Bending a board is a bad thing.
Quote
3. Also, Vin2 is shows as -12.77v is that right?
Sorry don't know, the board does use -12V from the powersupply so looks ok to me.
Quote
I am using an enermax Liberty 620W psu to power the show, 24pin in the Powerplug and a combo 8 pin plug in Jpwr1
Good powersupply.

An error occurred during translation of your HTML master page. For more information, please navigate to the master page by clicking the preview button in the Master Page Gallery or directly typing its URL

I apply theme before singing all users into application ,now visitor/member are not affected color text so we are reapplying themes
I am not able to reapplying SPColor /my site Host template " An error occurred during translation of your HTML master page. For more information, please navigate to the master page by clicking the preview button in the Master Page Gallery
or directly typing its URL" while applying theme i am getting error

is it your public site/ community site or team site?
what level of subscription you have?i would say try to delete the site and try to create a new.
http://community.office365.com/en-us/forums/154/t/147705.aspx
are you able to open the site in the sharepoint designer?
or try to send them the private message to the support team.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

How do I know which block has been changed in Master/Detail

Hi,
I have master detail blocks. How do I know which block has been changed?
I used :SYSTEM.FORM_STATUS. It only gave me "Changed" or "Query". but didn't tell me which block has been changed in MASTER or DETAIL.

I believe if :system.form_status != 'QUERY' you'll need to loop through through the blocks checking :system.block_status to see who changed. Of course you'd have to go_block() before checking the status.

Which is better for your hearing?

Got a pair of Yuin earbuds, and my problem is listening on a windy day. The wind creates a lot of bass rumble, making me turn up the volume. Canal phones sit closer to the eardrums, but would block out the wind so I could keep the volume lower.
Question, from someone with a degree of hearing loss already: which is better for your ears? Earbuds at higher volume or in-ear at lower vol?

I have 60% deafness in the right ear but also suffer tinnitus (loud whooshing sound) due to a RTA, but the left ear has excellent hearing. I have tried earbuds, headphones even a pair that you control the volume for both ears. None up to now have made any difference. On a windy day my left ear just compensates for the right, so I just hear in mono. To hear good sound, at the moment, it's best for me to listen to my ipod inserted into the Bose sound dock at home.

Maintain out put device in your user master data

Hi Experts,
My invoice is not get printing, it is giving error as maintain an ouput device in your user master data
I have maintained output in SU01->user id->Default->printer name.
still invoice is not printing it is giving same error & if i directly give print it gives error
*An error occurred while output was being issued. It is possible, for example, that the form to be issued has not been activated or has an error. An error may also have arisen while the data to be issued was being edited.
Procedure
Check possible causes of the problem.*
if I go in SP02 & check that spool request gives following error
Spool request 29,663 in system SPS is empty
If i send it by ZPDF it gives following error
OTF end command // missing in OTF data
Error in function CONVERT_OTFSPOOLJOB_2_PDF
can anybody guide me?
Thanks
Trupti

Hello
Try using Tcode SPAD.
Kindly refer following links for reference:
- Please maintain an output device in your user master data. - Smartform
- Maintain output device in user master data
- update was terminated: maintain output device. How to avoid?
Thanks & Regards
JP

Creative Xfi soundcard and NForce4 chipset, which BIOS solves the problem?

Hello,
I have the MSI K8N-Neo4 Platinum mobo. Is it possible to get the Xfi-card working without problems and which BIOS version do I need then?
A clear statement from MSI on this matter would be nice.

I just got my X-Fi today. I was running BIOS 1.3 on my non-SLI board. I knew what to expect and sure enough I wasn't disappointed - multiple unknown devices detected on the PCI bus. I've always been happy with BIOS 1.3 and had no reason to flash until today. I went ahead and flashed to 1.9, and my multiple devices magically turned into one
However (there just has to be a however), my pc now hangs on shutdown. I'm not too bothered by this - I'm confident I'll find the cause and solution, if not on this forum then somewhere out there in the techno-geek community

I can't set location reminders on my iphone, it says "Your calendar service, which keeps track of your reminders, doesn't allow location-based reminders"

"Your calendar service, which keeps track of your reminders, doesn't allow location-based reminders"
How do i fix this? my reminders location is on, but still cant do it....

Solution.
Since the change from google maps to apple maps. It is now necessary to go to your details in contacts, select your home address, maps appear now select by tapping on a road next to your home, a new pin appears saying dropped pin, click the arrow then add to contacts, add to existing, select yourself, then edit, delete the old home address then change the new one to read home. Do for other stored addresses. Works just fine now with siri

T60/T61: Which BIOS diagnostic card?

Hi,
which BIOS diagnostic card works in a T60 or T61? I've got a broken T60, which still beeps when RAM is removed, so
I guess the BIOS isn't corrupt. I've tried a miniPCIe card, but it doesn't display any POST code. Will a parallel port card
work, either on the Ultrabay Slim adapter or the port of a docking station or do I have to connec to the LPC bus directly to sniff port 80h accesses?
Thanks,
jal66

As far as I know, none work in the T60.
I use one of these on T61 and newer:
http://cgi.ebay.com/POST-CODE-Diagnostic-Test-Card-Repair-IBM-Notebook-/310316355904?pt=LH_DefaultDo...

Which BIOS shall I use for " K8T Neo -FSR"??

I bought a MSI K8T Neo- FSR board yesterday. But when I looked at the MSI web site I haven't seen ...FSR board, I only see ...FS2R board instead. So which BIOS shall I download and flash? There is also no any explanation about FSR. My board carries the BIOS V1.1. On the other hand it writes this informatin on the board; " K8t Neo 6702 rev. 1.0"

...here's the product page...I found it the other day but I can't remember how ...got lucky, I guess...
...BIOS version?..I've always used Live Update in Windows...just follow the directions to the letter...there are beta versions available in the forums...the current one is getting good reviews...

Which BIO is in your K8T800 Master 2-FAR?

Similar Messages

Maybe you are looking for