Which table/view stores the Driver values for each project

Hi,
I want to report on projects and drivers and the rating (Extreme, Moderate, low etc.) that have been assigned to each project. I cannot seem to local the correct table/view. I found the driver table and analysis tables but not one that has
a project and ratings.
What is the table / view?
Regards Andrew
Andrew Payze

Hi Andrew,
That would be the MSP_Project_Impact_values in the published schema.
Please note that querying this particular schema is not supported.
Hope this helps
Paul

Similar Messages

Which table field stored the exchange rate for controlling documents?

Hi,
May i know which table field stores the exchange rate used for a controlling document?

Hi,
The exchange rate is not specifically stored in CO. In table COEP, the data in transaction currency, object currency and controlling Area currency is stored. You can derive the exchange rate from here.
Rgds
Shivram.

Find out and get the bit value for each pixel in image

i use 16bit image. the image is 200x200 pixels. i need to know what is
the bit value for each pixel. example(0111111011111101).
where i can see the bit value output. if somebody got the example surce code please send it to me.coz i need the bit value to find out how many RGB color that use in the image. thanks for ur help.

How many logins do you have???

Which table/view stores information on APEX user groups?

Hi All,
I need to list all the APEX users, their roles(i.e. IS_ADMIN or IS_DEVELOPER) and the user groups they belong to.
Can some one kindly share the information on which tables/views will have all this information?
I am aware of apex_workspace_users which tells me about the roles (i.e. IS_ADMIN or IS_DEVELOPER).
Thanks in advance.
Annie

Thanks jari for your help.
I did manage to get the information on user groups by using APEX_UTIL.get_groups_user_belongs_to function.
However there are two issues in that:
Firstly, the requirement is that i should be able to retrieve this details by executing queries in SQLPPlus and not APEX WS. However, executing APEX_UTIL.get_groups_user_belongs_to function in sqlplus returns no data. That means there are certain permission issues on the underlying tables.
Secondly, the user groups are listed in a single row and I'd like the result in the multiple rows.

Which table/view has the schema details?

Hi All,
In which table/view I can view the different schemas present in the database? Should I sign-in as SYS or any user can read from that table?
Please help...
Thanks in advance...

DBA_USERS will tell you the users that have been created in the database. Some or all of those users may have objects in their schemas, which you can see via DBA_OBJECTS.
You don't need to be a DBA to query those views, but you do need appropriate privileges. Depending on your Oracle version, you'd need either the SELECT_CATALOG_ROLE role, the SELECT ANY DICTIONARY privilege, or a direct privilege grant on the particular views you're interested in.
Justin

Which table/view storing the page information?

Can someone tell me which table/view I can query to get the page name, id, and authorization scheme assigned to it?
Thank you kindly
Jean drouin

desc flows_020100.wwv_flow_steps
Name Null Type
ID NOT NULL NUMBER
FLOW_ID NOT NULL NUMBER
TAB_SET VARCHAR2(255)
NAME NOT NULL VARCHAR2(255)
ALIAS VARCHAR2(255)
PAGE_COMPONENT_MAP VARCHAR2(255)
STEP_TITLE VARCHAR2(255)
STEP_SUB_TITLE VARCHAR2(255)
STEP_SUB_TITLE_TYPE VARCHAR2(30)
FIRST_ITEM VARCHAR2(255)
WELCOME_TEXT VARCHAR2(4000)
BOX_WELCOME_TEXT VARCHAR2(4000)
BOX_FOOTER_TEXT VARCHAR2(4000)
FOOTER_TEXT VARCHAR2(4000)
HELP_TEXT CLOB()
STEP_TEMPLATE NUMBER
BOX_IMAGE VARCHAR2(255)
REQUIRED_ROLE VARCHAR2(255)
REQUIRED_PATCH NUMBER
HTML_PAGE_HEADER CLOB()
HTML_PAGE_ONLOAD VARCHAR2(4000)
ALLOW_DUPLICATE_SUBMISSIONS VARCHAR2(1)
ON_DUP_SUBMISSION_GOTO_URL VARCHAR2(4000)
PAGE_IS_PUBLIC_Y_N VARCHAR2(1)
PROTECTION_LEVEL VARCHAR2(1)
SECURITY_GROUP_ID NOT NULL NUMBER
ERROR_NOTIFICATION_TEXT VARCHAR2(4000)
ID2 NUMBER
LAST_UPDATED_BY VARCHAR2(255)
LAST_UPDATED_ON DATE
GROUP_ID NUMBER
PAGE_COMMENT VARCHAR2(4000)

Which table include duration&data records number for each nodes in PC?

Hi Experts,
Now I am on Process Chains maintenance work, I need daily record a very huge infopackage process chain's each nodes more then 50 infopackage, record something like duration ,data records nubmer for each infopackage. I need check this one by one in process chain, and my question is do you know this infomation record in which table in BW system? if i know it I will write a program to get it in one time.
Thanks in advance!

Hi,
You can find the information about the process[as you said nodes] in his tables ,
RSPCPROCESSLOG - Stores complete information about the finished process
RSPCPROCESSINSTANCE - Stores the meta data for the successor process..it also has the runtime
RSPCVARIANT and RSPCVARIANTATTR - the succesor process reacts to the event
Process chain related tables are start with RSPC*.
under Settings ® Maintain Process Types (table RSPROCESSTYPES).
Pls chk this link;
http://help.sap.com/saphelp_nw04/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
Other tables used for Process chains:
http://wiki.sdn.sap.com/wiki/display/BI/ProcessChainTables
Thanks
Hemav
Edited by: hemav on Aug 4, 2010 7:38 AM

Tables that store the "Personalization" values in Demantra CWB

Hi All,
Can some tell me, which tables stores the basic "personalize information" on CWB Demantra.Like i am looking for tables that stores "MY worksheets" information in the home page of CWB.
Thanks,

as far as i know...we dont have any table to show the below requirement
"Like i am looking for tables that stores "MY worksheets" information in the home page of CWB."
you can only view the list of available worksheets in queries table

Store the Printing Metadata for each picture

2) Can Lightroom store print metadata (font size/color, scaling factor) for each picture and for each virtual copy the way it already stores Vibrance, virtual copies, tone curves, etc. information?
Suppose Photo1 and Photo2 have widely different title lengths (6 letters and 20 letters, respectively). Then I print Photo1 then Photo2 then Photo1 again.
Right now I have to retype the title for Photo1 and re-scale the title letters for Photo1 to make them look the same size as the first time printing Photo1, even though I printed Photo1 already.
I print almost all of my photos with titles and often cannot know which photo I'll print next. This is a real time-waster and not having to do this each time would be a huge timesaver!
Thanks!
Robert

Thanks, Ian.
That is do-able for a small number of pictures but I title hundreds of pictures and it would be much better since LR has a nice database to automatically store that metadata.
An analogy in the Develop module is that users don't have to fill in a template to hold all their Develop metadata from session to session e.g., Recovery = 50, Fill = 10, Vibrance = 30, etc. because that would make LR's workflow far too cumbersome for 100s or 1000s of pictures. The same should be true for LR saving Print metadata.
Thanks again,
Robert

What are the accepted values for each Maps parameter in the Apple URL Scheme?

I'm interested in a complete enumerated list of the acceptable VALUES (as in KEY=VALUE) for the URL Scheme defined https://developer.apple.com/library/ios/featuredarticles/iPhoneURLScheme_Referen ce/MapLinks/MapLinks.html
Obviously some of those parameters have an enumerated list, some are freeform. I'm just interested in the enumerated ones.

Hi,
Have a look at include LBTCHDEF.
The standard include from SAP.
-> Definitions and Constants for Function group BTCH
Kind Regards
Raymond

Why would a PXI 4071 measuring resistance countinue to increase the measured valued for each measurement?

I have a PXI-4071 DMM and I am measuring a connection in the UUT. The value should be around 0.3 ohms. The program (exe) will run aprox. 20 times and during these 20 runs the measured value will progressively increase until is is over the limit of 1.5 ohms. If I shut down the exe and run the VI as a standalone (continuous loop), the resistance will gradually come down to 0.3 ohms. I then close LabView and restart my exe and the readings are normal (0.3) but then continue to increase until they are over 1.5 ohms. This process has been repeatable for the last week. I have attached the code I am running. What could be the problem with the DMM code?
Attachments:
DMM_MeasResistance2.vi ‏64 KB

Uninitialized shift registers are a good thing to check for such a problem. Do you see the same response with a soft panel and your DMM? if not then it is in code. Uninitialized shift registers would start at 0 (default is usually 0) and will retain their values from run to run. Just a possibility dont have LV up right now so I cant check the code sorry,
Paul
Paul Falkenstein
Coleman Technologies Inc.
CLA, CPI, AIA-Vision
Labview 4.0- 2013, RT, Vision, FPGA

Which table stores the condition values of a purchase order line item?

Hi,
Please let me know the table that stores the condition values of purchase order line items(when we click on conditions tab after selecting an item then we can see the condition types and there is a corresponding condition value for that condition type.
My requirement is to get the actual price for a purchase order line item(it can be seen in the last line and it is calculated after considering all the condition types) and display this value in a custom report.
Thanks,
Ravindra

Hi Ravindra
You can find the conditions data for PO in TAble KONV.
KONV-KSCH is the condition type
KONV-KWERT is the cond value
KONV-KNUMH is the condition doc no. which is there in EKKO field KNUMH.
So u have to make a link between KONV-KNUMH and EKKO-KNUMH.
Thanks
Vijeta

OTA/OLM 11.5.10 : which tables/views hold info for Ext, Int Training , Certifications.

Hello,
which tables/views stores information about .
Internal Training history
External Training History
Certifications
in R 11.5.10 ?
I found the following tables
OTA_NOTRNG_HISTORIES_V -- supposedly stores external training history, is this the right one for external training ?
OTA_CTRNG_HISTORIES_V -- stores combined training history , how to pick 'Internal' history from this view , if this is the right one ?
OTFV_COMBINED_TRAINING_HISTORY -- stores combined training history , how to pick 'Internal' history from this view , if this is the right one?
could not find any table in 11.5.10 for certifications.
Thanks

FSKB G/L Account Posting
this transaction is not working

Creating view to get first row for each table !!

I am having tables(more than 10) which are related using foreign key and primary key relationship.
Example:
Table1:
T1Prim T1Col1 T1Col2
Table2
T2For T2Prim T2Col1 T2Col2 T2Col3
(here T2For will have value same as T1Prim and in my design it has same column name i.e. T1Prim)
Table3
T3For T3Prim T3Col1 T3Col2 T3Col3
(here T3For will have value same as T2Prim)
and so on.
The data in the tables is like For table1 there will be one record, for table2 there will be one record and for table 3 there are more than one records.
Can i view either the first record for each of them or all records from each of them by writing the following view.
I have written a view like this:
Create or replace view test (T1Prim,T1Col1, T1Col2,T2Prim,T2Col1 T2Col2, T2Col3, T3Prim,T3Col1, T3Col2, T3Col3)
As
Select
Table1.T1Prim,
Table1.T1Col1,
Table1.T1Col2,
Table2.T2Prim,
Table2.T2Col1,
Table2.T2Col2,
Table2.T2Col3,
Table3.T3Prim,
Table3.T3Col1,
Table3.T3Col2,
Table3.T3Col3
From
Table1,
Table2,
Table3
where
Table1.Prim = Table2.For
and Table2.Prim = Table3.For
When i ran the select statement on the view I am not getting any data. Whereas there is data when select is ran on individual table.
Can someone please tell me where i am goofing.
Thanks in the anticipation that i will get some hint to solve this.
Eagerly waiting for reply.
Thanks !!

I mean use a collection :
Collection Methods
A collection method is a built-in function or procedure that operates on collections and is called using dot notation. The methods EXISTS, COUNT, LIMIT, FIRST, LAST, PRIOR, NEXT, EXTEND, TRIM, and DELETE help generalize code, make collections easier to use, and make your applications easier to maintain.
EXISTS, COUNT, LIMIT, FIRST, LAST, PRIOR, and NEXT are functions, which appear as part of an expression. EXTEND, TRIM, and DELETE are procedures, which appear as a statement. EXISTS, PRIOR, NEXT, TRIM, EXTEND, and DELETE take integer parameters. EXISTS, PRIOR, NEXT, and DELETE can also take VARCHAR2 parameters for associative arrays with string keys. EXTEND and TRIM cannot be used with index-by tables.
For more information, see "Using Collection Methods".
Syntax
Text description of the illustration collection_method_call.gif
Keyword and Parameter Description
collection_name
This identifies an index-by table, nested table, or varray previously declared within the current scope.
COUNT
COUNT returns the number of elements that a collection currently contains, which is useful because the current size of a collection is not always known. You can use COUNT wherever an integer expression is allowed.
For varrays, COUNT always equals LAST. For nested tables, normally, COUNT equals LAST. But, if you delete elements from the middle of a nested table, COUNT is smaller than LAST.
DELETE
This procedure has three forms. DELETE removes all elements from a collection. DELETE(n) removes the nth element from an index-by table or nested table. If n is null, DELETE(n) does nothing. DELETE(m,n) removes all elements in the range m..n from an index-by table or nested table. If m is larger than n or if m or n is null, DELETE(m,n) does nothing.
EXISTS
EXISTS(n) returns TRUE if the nth element in a collection exists. Otherwise, EXISTS(n) returns FALSE. Mainly, you use EXISTS with DELETE to maintain sparse nested tables. You can also use EXISTS to avoid raising an exception when you reference a nonexistent element. When passed an out-of-range subscript, EXISTS returns FALSE instead of raising SUBSCRIPT_OUTSIDE_LIMIT.
EXTEND
This procedure has three forms. EXTEND appends one null element to a collection. EXTEND(n) appends n null elements to a collection. EXTEND(n,i) appends n copies of the ith element to a collection. EXTEND operates on the internal size of a collection. So, if EXTEND encounters deleted elements, it includes them in its tally. You cannot use EXTEND with index-by tables.
FIRST, LAST
FIRST and LAST return the first and last (smallest and largest) subscript values in a collection. The subscript values are usually integers, but can also be strings for associative arrays. If the collection is empty, FIRST and LAST return NULL. If the collection contains only one element, FIRST and LAST return the same subscript value.
For varrays, FIRST always returns 1 and LAST always equals COUNT. For nested tables, normally, LAST equals COUNT. But, if you delete elements from the middle of a nested table, LAST is larger than COUNT.
index
This is an expression that must yield (or convert implicitly to) an integer in most cases, or a string for an associative array declared with string keys.
LIMIT
For nested tables, which have no maximum size, LIMIT returns NULL. For varrays, LIMIT returns the maximum number of elements that a varray can contain (which you must specify in its type definition).
NEXT, PRIOR
PRIOR(n) returns the subscript that precedes index n in a collection. NEXT(n) returns the subscript that succeeds index n. If n has no predecessor, PRIOR(n) returns NULL. Likewise, if n has no successor, NEXT(n) returns NULL.
TRIM
This procedure has two forms. TRIM removes one element from the end of a collection. TRIM(n) removes n elements from the end of a collection. If n is greater than COUNT, TRIM(n) raises SUBSCRIPT_BEYOND_COUNT. You cannot use TRIM with index-by tables.
TRIM operates on the internal size of a collection. So, if TRIM encounters deleted elements, it includes them in its tally.
Usage Notes
You cannot use collection methods in a SQL statement. If you try, you get a compilation error.
Only EXISTS can be applied to atomically null collections. If you apply another method to such collections, PL/SQL raises COLLECTION_IS_NULL.
You can use PRIOR or NEXT to traverse collections indexed by any series of subscripts. For example, you can use PRIOR or NEXT to traverse a nested table from which some elements have been deleted.
EXTEND operates on the internal size of a collection, which includes deleted elements. You cannot use EXTEND to initialize an atomically null collection. Also, if you impose the NOT NULL constraint on a TABLE or VARRAY type, you cannot apply the first two forms of EXTEND to collections of that type.
If an element to be deleted does not exist, DELETE simply skips it; no exception is raised. Varrays are dense, so you cannot delete their individual elements.
PL/SQL keeps placeholders for deleted elements. So, you can replace a deleted element simply by assigning it a new value. However, PL/SQL does not keep placeholders for trimmed elements.
The amount of memory allocated to a nested table can increase or decrease dynamically. As you delete elements, memory is freed page by page. If you delete the entire table, all the memory is freed.
In general, do not depend on the interaction between TRIM and DELETE. It is better to treat nested tables like fixed-size arrays and use only DELETE, or to treat them like stacks and use only TRIM and EXTEND.
Within a subprogram, a collection parameter assumes the properties of the argument bound to it. So, you can apply methods FIRST, LAST, COUNT, and so on to such parameters. For varray parameters, the value of LIMIT is always derived from the parameter type definition, regardless of the parameter mode.
Examples
In the following example, you use NEXT to traverse a nested table from which some elements have been deleted:
i := courses.FIRST; -- get subscript of first element
WHILE i IS NOT NULL LOOP
-- do something with courses(i)
i := courses.NEXT(i); -- get subscript of next element
END LOOP;
In the following example, PL/SQL executes the assignment statement only if element i exists:
IF courses.EXISTS(i) THEN
courses(i) := new_course;
END IF;
The next example shows that you can use FIRST and LAST to specify the lower and upper bounds of a loop range provided each element in that range exists:
FOR i IN courses.FIRST..courses.LAST LOOP ...
In the following example, you delete elements 2 through 5 from a nested table:
courses.DELETE(2, 5);
In the final example, you use LIMIT to determine if you can add 20 more elements to varray projects:
IF (projects.COUNT + 20) < projects.LIMIT THEN
-- add 20 more elements
Related Topics
Collections, Functions, Procedures
http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96624/13_elems7.htm#33054
Joel P�rez

Can I plot 2 locations at the same time for each record in a table

I'm trying to plot 2 Locations (2 points on a Power View Map) at the same time for each record/project in a table
I can plot 1 location for each project of course with no problem
but I'm trying to show the Begin Point and the
End Point for each project at the same time
Is this even possible?

First of all THANKS this worked!
But now I stumbled on another issue. So I actually have 3 tables (and I've adopted them to the file you sent)
Table 1 => TripData
Trip
LongLat
Location
Type
TypeCode
Size
NW Tour
47.568077, -122.320800
Seattle, WA
Begin
0
1
NW Tour
47.035608, -122.884812
Olympia, WA
End
1
1
Cali Trip
37.808848, -122.412580
San Francisco, CA
Begin
0
1
Cali Trip
32.682611, -117.178348
San Diego, CA
End
1
1
Table 2 =>
TripInfo
Trip
OneLongLat
NTP
NW Tour
47.568077, -122.320800
1/1/2015
Cali Trip
37.808848, -122.412580
1/5/2015
Table 3 =>
ALLTrips
Trip
Stop
Owner
NW Tour
1
Owner1
NW Tour
2
Owner2
NW Tour
3
Owner3
NW Tour
4
Owner4
NW Tour
5
Owner5
Cali Trip
1
Owner6
Cali Trip
2
Owner7
Cali Trip
3
Owner8
Cali Trip
4
Owner9
Cali Trip
5
Owner10
Cali Trip
6
Owner11
This is how the Diagram View looks like in PowerPivot
Trip Data => Trip Info <= ALLTrips
Since I don't know how to post pictures
The MAP FIELDS are as follows
SIZE - Count of Stop(s)
LOCATIONS - OneLongLat followed by
LongLat (drill down feature)
COLOR - Trip
The problem now happens with the drill down feature
You can either plot OneLongLat which is the general location for each trip
Or LongLat of each trip which shows the begin and end points
But you can't use the drill down feature???
If instead of OneLongLat you use a
State Column it actually works!!!
I wonder if it has to do with the fact that both locations used for the drill down are Long/Lat numbers???
Any suggestions???
And again Thanks for the response!

Which table/view stores the Driver values for each project

Similar Messages

Maybe you are looking for