While Pressing the button i want to skip first screen in standard screen.

Hello All,
I need to create a z Program and call a screen variant of a standard transaction in it.
I am calling a screen variant of transaction PA70 to hide some of the fields of the screen.
Also the first screen is supressed.
My requirement is while pressing back button it should not come on the first screen.
while if i am doing the same thing with Transaction PA20 it is not coming back to first screen.
How can i supress this first screen while coming back?
Regards.

Hi,
Use:
"set al the field values on the initial screen of the transaction and then use
CALL TRANSACTION '<t-code>' AND SKIP FIRST SCREEN.
Now you will be navigated to second screen of the transaction, when you click, you will be navigated to your program selection screen.
Hope this helps you.
Regards,
Tarun

Similar Messages

I have a button in JSP page inside an UIWebView by pressing the button i want to run another existing iPhone native application in background only.Do anyone have a solution for this.

I have a button in JSP page inside an UIWebView by pressing the button i want to run another
existing iPhone native application in background only.Do anyone have a solution for this.

Sounds like a virus.... I hope it's not...
Launching Other Apps within an iPhone

Am having major issues! this does not work i dont understand..does the ipod have to be off while pressing the buttons if so how is it possible if it is connected to the computer either way it turns on..and when i tried these steps while the ipod was on it

i am having major issues! this does not work i dont understand..does the ipod have to be off while pressing the buttons if so how is it possible if it is connected to the computer either way it turns on..and when i tried these steps while the ipod was on it still doesnt work it just asks me “slide to power off” please someone help me i just cant seem to put my ipod in DFU mode

To get the iPod in recovery mode and DFU mode you first have to turn the iPod off.
Just what is the problem you are tying to resolve?
Sometimes you have to let the battery fully drain if you can't turn the iPod off. After charging for at least hour try again.

When i dont press the button i want the value start to decrease by itself

Dear all,
I am controlling a numeric control value in the front panel : I am pressing increase button to increase the value, but what I want is that when i stop pressing the increment button the numeric value should decrease by itseft (automatically) Please, I need your help.
Kind Regards from Turkey.
Have a nice day.

Salander wrote:
Firstly thank you for your reply, actually i couldnt try any of these,
Why not?
Salander wrote:
I have something in my mind but I am sure it wont work.
Then put something else in your mind! Don't spend thoughts on things that won't work.
Salander wrote:
I am not very good at programming, I want it to decrease Linearly to Zero.
What have you tried so far? Nobody is good at programming until they program for a while and learn new skills.
A car does not decrease the speed linearly to zero.
If you are controlling a real car with real hardware, it will decrease to zero automatically due to friction and wind resistance, so why would you need to program it?
If you are trying to simulate a car in software, create a software model that simulates a car based on parameters (current speed, mass, inertia, slope, wind resistance, drag coefficients, rolling resistance, friction, engine power, etc.).
I would recommend to open the example finder an look at some examples. have a look at the "tank simulation.vi", and substitute tank level with speed, or look at "vibration analysis.vi". See how the rotation speed decreases slowly if the velocity is set to zero.
Attached is a simplified version, hopefully it can give you some ideas. If this is for school, you need to make sure that you fully understand the reason for every little detail in the program and can explain it to you teacher if needed. Try to expand the functionality by adding a brake pedal, for example.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
Car Simulation.vi ‏15 KB

Is anyone having problems with the main screen button of the Iphone 4? More often than not I have to press the button 10-15 times to open or close a screen..

My Iphone 4 main button on bottom only intermittently works...usually have to press it 10-15 times to get it to work..other times(like whenever I schedule a n appt with the genius bar to check it out), it works fine. Driving me crazy...only 6 mos old.

Try this: http://forums.adobe.com/message/2796075

Hello I formatted my iMac today and wanted to download iphoto again but after i press the button to install it in the app store nothing happens! same with the yosemite upgrade..

Hello I formatted my iMac today and wanted to download iphoto again but after i press the button to install it in the app store nothing happens! same with the yosemite upgrade.. In the iPhoto ratings there are alot of other people facing this problem I hope somebody can help me. thank you in advance

If you have OS X 10.6.8 as you state you can not get iphoto form the App store - you must have Yosemite OS X 10.10. installed to download iphoto 9.6 from the App store
If Nothing happens then you need to contact App store support - link is on the right of the App store window
LN

Keep exiting to the menu itself (while pressing the camera roll button) when trying to upload photos in iMessages or Facebook.

Keep exiting to the menu itself (while pressing the camera roll button) when trying to upload photos in iMessages or Facebook.

Here is an article from the apple support website that might help out.
http://support.apple.com/kb/TS1502

Hello , I want ask you, how can I refuse purchase application, Hello , I want ask you, how can I refuse purchase application Lingvo Dictionaries , ID:MHQTYLHNGH, I accidentally pressed the button to buy and went to boot without requiring a password

Hello , I want ask you, how can I refuse purchase application, Hello , I want ask you, how can I refuse purchase application Lingvo Dictionaries , ID:MHQTYLHNGH, I accidentally pressed the button to buy and went to boot without requiring a password, Help me please.

Contact Apple iTunes support: http://www.apple.com/support/itunes/contact/

I bougnt my S5 a month ago and I am having two major issues. The screen is very slow to respond. When the screen is dark and I press the home button, it doesn't come on. I have to press the button anywhere from 4-10 times and then it usually flashes on

I bougnt my S5 a month ago and I am having two major issues. The screen is very slow to respond. When the screen is dark and I press the home button, it doesn't come on. I have to press the button anywhere from 4-10 times and then it usually flashes on and back off. It is very, very frustrating. The other issue is that the battery drains very quickly. I have called Verizon numerous times regarding these issues. They tell me to do different things that never help. We eventually did a factory reset and it still has the same issues. Help! It is a brand new phone and unfortunately I am in a new two year contract. Ugh. Is there anyone out there who can help me?

I have done that several times. In fact, every time I call Verizon with my phone problems, they have me do the same things repeatedly. I keep telling them I have already done them but they insist they are SURE it will work this time. It never does. After doing the factory reset and it still not working correctly, they act like they are confused, almost like I am lying. I did what you suggested above on the slim chance it would work this time but it did not. I bought two S5's that day and the other one works perfectly fine. I know I got a bad phone. Verizon just does not listen. It is a bad phone. I just want a new phone that works properly. Is that too much to ask? I bought a new phone that has been bad from day one. Why oh why do I have to spend hours of my time on the phone, in the store, on the computer, trying to rectify this? It shouldn't be this difficult! Help please!!!

I am trying to listen BBC radio news from BBC App, but on pressing the button I always get the error "there was an error playing this radio feed". What is the source of this error and how can I remove it?

I am trying to listen BBC radio news from BBC App, but on pressing the button "live radio" I always get the error "there was an error playing this radio feed". What is the source of this error and how can I remove it?

That is probably just a generic error message and you might not ever know what is causing it. Assuming that you have been able to play live radio with the app in the past (I know nothing about the app) and assuming that all other Internet related functions (Safari, email, etc.) are working properly on your iPad, quit the app completely and reboot your iPad.
Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that fails to resolve the issue, you might want to reboot your router, unplug it for about 30 seconds and then plug it in again.

Crackling sound while pressing the area of Micro SIM slot?

I´ve to ask the global z1 compact users about the build quality of the devices.
My first device from amazon.de had a crackling sound while pressing the area of the micro SIM card slot - amazon did an instand replace but the replacement unit also started with this issue on day after set up. I think this is not a general fault but i´m a bit angry with this issue on such an premium device.
Can you hear anything when pressing this area? what do you think about that? Will you recharge?
I´ll hope that this is not a problem for water resistance...thinking about the Z in the first times...loosing back panel...
Greetings,
SirRobin

Could you please send me your details in a PM, and I will forward this.
Make a relevant topic and include the following.
Name:
Phone nr:
E-mail:
Country:
Operator:
Product(s):
IMEI nr:
Build number:
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Call a external SWF by press the button within another SWF file but the second SWF file play Externely

Hello Guyz.
i am working on Macromedia Flash 8 and i just want to call a external SWF when i press the button within another SWF file.......but the second SWF file play Externely............can any one knows the code.... AS2

try this
http://www.actionscript.org/forums/showthread.php3?s=&threadid=28123

Saving a plot as a hws file while pressing a button

I wanna save a plot received from a digital scope as a hws file while the button shown on the figure (its just a cutting/the important part of the program) below is in pressed (true) state.
But when im running this program and i press the button always a hws file of a constant length is saved. It makes no difference how long the button stays pressed.
What could be wrong?
Attachments:
save hws file.jpg ‏103 KB

Without knowing all of the details of your app, I see two issues that don't match up with what you mentioned you are trying to do.
1) The Open Waveform VI is set to "Create New Always", so at each iteration of your while loop, the old HWS file is being destroyed and a new one is getting created in it's place. If you are intending to append data to an HWS file, you must use the "Read/Write" permissions only.
2) Your inner for loop has a Create New Waveform VI inside of it. So what is happeing is that each iteration of your for loop is creating a new waveform inside of your HWS file rather than appending to the already existing one. HWS files can save multiple waveforms into one HWS file. I see you are naming each waveform, so I'm guessing this was intentional.
If you are trying to stream to a file only when the button is pressed, my guess is that your problem is with item 1) above. When the button is pressed, any existing HWS files at that filepath are getting destroyed, and a new one is getting created in it's place. So when your application is finished, you will have one file with one set up data in it. The data will be from the last while loop interation when the boolean was set to true.
If you are trying to append to an existing HWS file, you will need to open the file with Read/Write permissions and then use the Open Existing Waveform VI rather then the Create New Waveform VI inside of your for loop.
-JaredW

After installing Mavericks on my MacBook Pro 2009 (japanese keyboard) the layout doesn't work. I mean if I press the @ button the è symbol comes out. I tried to change the layout in Preferences but doesn't work. Could anyone help me please?

Hi there
after installing Mavericks on my macbookpro 2009 (Japanese keyboards) the layout doesn't work anymore. I mean, if I press the "@" button the "è" symbol comes out. I did already change the layout in the Preferences but it didn't work.
Could anyone help me please?

Apple has changed the way Kotoeri keyboard layouts work. You should be able to get normal behavior if you activate the US layout and switch to that just before using Kotoeri. Here is also an Apple note on the topic with another suggestion:
http://support.apple.com/kb/TS5284
Be sure to tell Apple you want this changed back to the way if was in 10.8 and earlier via
http://www.apple.com/feedback
If you know Japanese well, you might ask on the Japanese discussions whether someone has found a better fix for this:
https://discussionsjapan.apple.com

Bex Analizer - while pressing "Open" button or any other there is no action

Hello,
We have a problem with Bex Analizer application installed on a certain computers (for example Dell 520 laptop or Dell GX 755 desktop computer). After installation there is no possibility to initiate application.
The instalation ends successfully. I am choosing Start --> Programs --> Bussiness Explorer --> Analyzer. The correct excel window with Bex Analyzer belt on the left side of the window appears. While pressing u201EOpenu201D button or any other button belonging to Bex Analizer, there is no any program action.
Computer with this Bex Analizer problem has WinXP, Office 2003 installation, gui patch no. 13 (file: gui710_13-10002995.exe) and BEX patch (file: bi710sp09p_902-10004472.exe). These files are also installed on other computers (for example Dell 630 laptop) and Bex Analizer works there correctly.
Waiting for your reply.
Adam Pikula

Hi,
Please try the following....
Uninstall:
.NET Framework, if this is not 2.0
SAP GUI
Install:
.NET Framework 2.0
SAP GUI 710 - install GUI and Business Explorer
GUI path 11
BI Add - on for GUI "bi710sp09p_902-10004472.exe"
Other Way:
Applying the patch attached to the OSS Note 1121263 - BEx Analyzer 7.10
Applying the Microsoft patch : http://support.microsoft.com/kb/908002/
Rgds,
Murali

While Pressing the button i want to skip first screen in standard screen.

Similar Messages

Maybe you are looking for