White or black -- heat issues when in the sun??
I have a black 4s now and I'm deciding between the white and black 5S later this month.
I tend to use my phone as my GPS and have a window mount that holds the phone up for me. However, this means that the back of the phone is frequently in direct sunlight and it gets pretty warm. As a result, I normally don't keep it in a case so that the air can better circulate to cool it.
SO, with the metal cases, will it matter much from a heat perspective if I get a white or black phone next? I think the white might stay slightly cooler, but I don't think it's going to be all THAT significant. Does anyone have any info/data/reasonably informed opinions??
Thanks!
Hello Chris
The article below will give some information about keeping your iPhone within acceptable temperatures.
iOS devices: Keeping device within acceptable operating temperatures
http://support.apple.com/kb/ht2101
Thanks for using Apple Support Communities.
Regards,
-Norm G.
Similar Messages
-
When I try to include a white and black photo in a iMovie the result is a black totaly black picture which does not show in the movie. Why? Can it be fixed?
The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Other than that, what version of iPhoto do you have? Assuming 09 or later try
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD
P.S. Please don't type in block capitals. They are harder to read and on the forum it looks like you're having a tantrum -
I'm using a mid 2014 13" rmbp. I reinstall the Yosemite due to the wifi issue, when finished, the iMovie was not installed, I try to download it from app store, but it's not free. How can I get iMovie back?
It's something to do with the main user account (not iTunes account) on my Mac because I logged in with another account and it downloaded fine, I installed it on the HDD and even though the date in App Store was 16th October 2014, it is the full installer of 10.10.2.
To try to resolve this problem, I have copied the installer app elsewhere and deleted it but App Store still will not allow me to download it with my main user account yet just allowed me to update iTunes.
I had a brainwave last night that it might have been related to me changing the default downloads folder to one not on my boot drive (to save disk space on my main boot drive) but having changed it back, tried again, rebooted and tried yet again, deleted my App Store preferences. nothing has worked. -
i like the "whites" and "blacks" sliders in lightroom with the option key pressed- is there a corresponding slider in aperture? thank you
There's no exact analogue to the "whites" slider in Aperture. But you could do it with curves if you wanted. You can set the white point using the curves tool as well.
-
Our ipad 1 goes to a black screen periodically when using the internet.
Our iPad 1 goes to a black screen periodically when using the internet. We have to hit the home button and hope we end up back at the site we were previously at. We have updated the iPad, but it still happens. Any suggestions on a solution?
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons... -
TimeZone issues when starting the OEM Agent since summertime switch Germany
Hello gurus,
since yesterday when the system time has swithched to summer time in Germany I have below errors when starting the agents on our systems:
****@*****: /oracle > su - ora*** -c /oracle/product/agent10g/bin/emctl start agent
Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Starting agent ....... failed.
The agentTZRegion value in /oracle/product/agent10g/sysman/config/emd.properties is not in agreement with what agent thinks it should be.Please verify your environment to make sure that TZ setting has not changed since the last start of the agent.
If you modified the timezone setting in the environment, please stop the agent and exectute 'emctl resetTZ agent' and also execute the script mgmt_target.set_agent_tzrgn(<agent_name>, <new_tz_rgn>) to get the value propagated to repository.
Consult the log files in: /oracle/product/agent10g/sysman/log
So I tryed the suggested resetTZ, but get below errors:
root@******: /oracle/product/agent10g/sysman/log > su - oradeu -c /oracle/product/agent10g/bin/emctl resetTZ agent
Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Updating /oracle/product/agent10g/sysman/config/emd.properties...
----- Mon Mar 31 10:18:48 2008::tzOffset for +01:00 is 60(min), but agent is runnning with tzOffset 120(min)
----- Mon Mar 31 10:18:48 2008::trying again after waiting for 1 sec to account for daylight transition
----- Mon Mar 31 10:18:48 2008::tzOffset for +01:00 is 60(min), but agent is runnning with tzOffset 120(min)
resetTZ failed.
The agentTZRegion in:
/oracle/product/agent10g/sysman/config/emd.properties
is not in agreement with what the agent thinks it should be.
Fix your environment.
Pick a TZ value that corresponds to time zone settings listed in:
/oracle/product/agent10g/sysman/admin/supportedtzs.lst
I checked the TZ settings:
*****> echo $TZ
MEZ-1MSZ,M3.5.0/02:00:00,M10.5.0/03:00:00
*****: /oracle/product/agent10g/sysman/config > more emd.properties|grep agentTZ
agentTZRegion=+01:00
which is the reason for the difference of 120min as shown by the resetTZ I assume because AIX system time says MEZ -1 and emd.properties finds GMT+1 which gives a difference of 120min.
I already applied the patch 5632264 to the agent, but the issue still exists.
When I manipulate the envirement TZ to GMT+01:00 the agent starts again, but this is no solution. Also patching the TZ of UNIX/AIX is no solution because this will cause other issues.
Any ideas how I can get the agent working again?
ps. I already tried a reinstallation of the Agent, but the issue still exists.
Thank you
F.WittmannHello,
I already installed the DST patch v4. see my first post.
Below I attached the logs from starting the agenent since crash:
emctl.log (since start until crash)=
1310886 :: Thu Apr 3 10:29:31 2008::AgentLifeCycle.pm: Processing status agent
1310886 :: Thu Apr 3 10:29:31 2008::AgentStatus.pm:Processing status agent
1310886 :: Thu Apr 3 10:29:31 2008::AgentStatus.pm:emdctl status returned 1
1462412 :: Thu Apr 3 10:29:41 2008::AgentLifeCycle.pm: Processing start agent
1462412 :: Thu Apr 3 10:29:41 2008::AgentLifeCycle.pm: EMHOME is /oracle/product/agent10g
1462412 :: Thu Apr 3 10:29:41 2008::AgentLifeCycle.pm:status agent returned with retCode=1
1462412 :: Thu Apr 3 10:30:37 2008::AgentLifeCycle.pm: Exited loop with retCode=4
1003654 :: Thu Apr 3 10:35:00 2008::AgentLifeCycle.pm: Processing status agent
1003654 :: Thu Apr 3 10:35:00 2008::AgentStatus.pm:Processing status agent
1003654 :: Thu Apr 3 10:35:02 2008::AgentStatus.pm:emdctl status returned 3
1536132 :: Thu Apr 3 10:38:26 2008::AgentLifeCycle.pm: Processing status agent
1536132 :: Thu Apr 3 10:38:26 2008::AgentStatus.pm:Processing status agent
1536132 :: Thu Apr 3 10:38:26 2008::AgentStatus.pm:emdctl status returned 1
emdctl.trc (since start until crash)=
2008-04-03 10:29:41 Thread-1 WARN http: snmehl_connect: connect failed to (sat141:3872): A remote host refused an attempted connect operation. (error = 79)
2008-04-03 10:29:41 Thread-1 ERROR main: nmectla_agentctl: Error connecting to https://*****:3872/emd/main/. Returning status code 1
2008-04-03 10:37:05 Thread-1 WARN http: snmehl_connect: connect failed to (sat141:3872): A remote host refused an attempted connect operation. (error = 79)
2008-04-03 10:37:05 Thread-1 ERROR main: nmectla_agentctl: Error connecting to https://*****:3872/emd/main/. Returning status code 1
2008-04-03 10:38:26 Thread-1 WARN http: snmehl_connect: connect failed to (sat141:3872): A remote host refused an attempted connect operation. (error = 79)
2008-04-03 10:38:26 Thread-1 ERROR main: nmectla_agentctl: Error connecting to https://*****:3872/emd/main/. Returning status code 1
emagent.log (since start until crash)=
2008-04-03 10:31:13 Thread-1 EMAgent started successfully (00702)
2008-04-03 10:37:04 Thread-1670 <Upload Manager> Unsuccessful Upload attempts for XML file exceeds specified limit=3, Agent will shutdown (00851)
2008-04-03 10:37:04 Thread-1 EMAgent abnormal terminating (00704)
emagent.trc (since start until crash)=
2008-04-03 10:35:16 Thread-1076 WARN TargetManager: Regenerating all Metadata
2008-04-03 10:36:48 Thread-1076 DEBUG TargetManager: In getTypeAndNameForHostTarget
2008-04-03 10:36:48 Thread-1076 DEBUG TargetManager: getTypeAndNameForHostTarget found host, sat141
2008-04-03 10:36:48 Thread-1076 DEBUG TargetManager: In getTypeAndNameForHostTarget
2008-04-03 10:36:48 Thread-1076 DEBUG TargetManager: getTypeAndNameForHostTarget found host, sat141
2008-04-03 10:36:48 Thread-1076 DEBUG TargetManager: In getTypeAndNameForHostTarget
2008-04-03 10:36:48 Thread-1076 DEBUG TargetManager: getTypeAndNameForHostTarget found host, sat141
2008-04-03 10:36:48 Thread-1076 DEBUG TargetManager: In getTypeAndNameForHostTarget
2008-04-03 10:36:48 Thread-1076 DEBUG TargetManager: getTypeAndNameForHostTarget found host, sat141
2008-04-03 10:36:48 Thread-1076 WARN collector: Regenerating all DefaultColls
2008-04-03 10:36:58 Thread-1076 ERROR upload: Failed to upload file A0000003.xml, ret = -6
2008-04-03 10:36:58 Thread-1076 ERROR upload: 3 Failures in a row for A0000003.xml, we give up
2008-04-03 10:36:58 Thread-1076 ERROR upload: Error in uploadXMLFiles. Trying again in 72.00 seconds or earlier.
2008-04-03 10:37:04 Thread-1670 WARN upload: FxferSend: received fatal error in header from repository: https://stloem2:1159/em/upload
FATAL_ERROR::500|ORA-20603: Updating timezone region of a target is not supported. Use mgmt_target.set_agent_tzrgn() API to modify the timezone region.(target name = sat141:3872)(target type = oracle_emd)(new tzrgn = MET)(old tzrgn = +01:00)
ORA-06512: at "SYSMAN.CHECK_DUPLICATE_TARGETS", line 92
ORA-04088: error during execution of trigger 'SYSMAN.CHECK_DUPLICATE_TARGETS'
2008-04-03 10:37:04 Thread-1670 ERROR upload: number of fatal error exceeds the limit 3
2008-04-03 10:37:04 Thread-1670 ERROR upload: agent will shutdown now
2008-04-03 10:37:04 Thread-1670 ERROR : Signalled to Exit with status 55
2008-04-03 10:37:04 Thread-1 ERROR main: EMAgent abnormal terminating
=======================================================
when I run emctl config agent getTZ it returns me GMT+01:00,
but with this value the agent does not start, oly with MEZ....
root@******: /oracle/product/agent10g/oracore/zoneinfo > su - oradeu -c /oracle/product/agent10g/bin/emctl config agent getTZ
Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
GMT+01:00
Kind regards
F.Wittmann -
Performance issue when using the same query in a different way
Hello,
I have a performance problem with the statement below when running it with an insert or with execute immediate.
n.b.: This statement could be more optimized, but it is a generated statement.
When I run this statement I get one row back within one second, so there is no performance problem.
select sysdate
,5
,'testje'
,count (1)
,'NL' groupby
from (select 'different (target)' compare_type
,t.id_org_addr id_org_addr -- ID_ORG_ADDR
,t.vpd_country vpd_country -- CTL_COUNTRY
,t.addr_type addr_type -- ADDRESSTYP_COD
from (select *
from (select t.*
from ods.ods_org_addr t
left outer join
m_sy_foreign_key m
on m.vpd_country = t.vpd_country
and m.key_type = 'ORGADDR2'
and m.target_value = t.id_org_addr
where coalesce (t.end_date, to_date ('99991231', 'yyyymmdd')) >= sysdate) /*SGRB*/
where vpd_country = 'NL' /*EGRB*/
) t
where exists
(select null
from (select *
from (select m.target_value id_org_addr
,s.wkp_id_cegedim || '-' || s.adr_id_cegedim || '-' || s.addresstyp_cod id_cegedim
,s.*
from okc_mdl_workplace_address s
left outer join
m_sy_foreign_key m
on m.vpd_country = s.ctl_country
and m.key_type = 'ORGADDR2'
and m.source_value = s.wkp_id_cegedim || '-' || s.adr_id_cegedim || '-' || s.addresstyp_cod
where coalesce (s.end_val_dat, to_date ('99991231', 'yyyymmdd')) >= sysdate) /*SGRB*/
where ctl_country = 'NL' /*EGRB*/
) s
where t.id_org_addr = s.id_org_addr)
minus
select 'different (target)' compare_type
,s.id_org_addr id_org_addr -- ID_ORG_ADDR
,s.ctl_country vpd_country -- CTL_COUNTRY
, (select to_number (l.target_value)
from okc_code_foreign l
where l.source_code_type = 'TYS'
and l.target_code_type = 'ADDRLINKTYPE'
and l.source_value = upper (s.addresstyp_cod)
and l.vpd_country = s.ctl_country)
addr_type -- ADDRESSTYP_COD
from (select *
from (select m.target_value id_org_addr
,s.wkp_id_cegedim || '-' || s.adr_id_cegedim || '-' || s.addresstyp_cod id_cegedim
,s.*
from okc_mdl_workplace_address s
left outer join
m_sy_foreign_key m
on m.vpd_country = s.ctl_country
and m.key_type = 'ORGADDR2'
and m.source_value = s.wkp_id_cegedim || '-' || s.adr_id_cegedim || '-' || s.addresstyp_cod
where coalesce (s.end_val_dat, to_date ('99991231', 'yyyymmdd')) >= sysdate) /*SGRB*/
where ctl_country = 'NL' /*EGRB*/
) s) When I run this statement using a insert by placing
insert into okc_compare_results (
datetime
,compare_tables_id
,compare_target
,record_count
,groupby
) before the statement, then the statement runs about *3 to 4 minutes*, The same is happening when running the select part only using execute immediate.
Below the execution plans of the insert with the select and the select only.
Could somebody tell me what causes the different behavior of the "same" statement and what could I do to avoid this behavior.
The database version is: 11.1.0.7.0
Regards,
Fred.
SQL Statement which produced this data:
select * from table(dbms_xplan.display_cursor ('cuk3uwnxx344q',0 /*3431532430 */))
union all
select * from table(dbms_xplan.display_cursor ('862aq599gfd6n',0/*3531428851 */))
plan_table_output
SQL_ID cuk3uwnxx344q, child number 0
select sysdate ,:"SYS_B_00" ,:"SYS_B_01"
,count (:"SYS_B_02") ,:"SYS_B_03" groupby from ( (select
:"SYS_B_04" compare_type ,t.id_org_addr id_org_addr
-- ID_ORG_ADDR ,t.vpd_country vpd_country --
CTL_COUNTRY ,t.addr_type addr_type -- ADDRESSTYP_COD
from (select * from (select t.*
from ods.ods_org_addr t
left outer join
m_sy_foreign_key m on
m.vpd_country = t.vpd_country ; and
m.key_type = :"SYS_B_05" and
m.target_value = t.id_org_addr ; where
coalesce (t.end_date, to_date (:"SYS_B_06", :"SYS_B_07")) >= sysdate)
/*SGRB*/ where vpd_country = :"SYS_B_08" /*EGRB*/
Plan hash value: 3431532430
Id Operation Name Rows Bytes Cost (%CPU) Time Pstart Pstop
0 SELECT STATEMENT 1772 (100)
1 SORT AGGREGATE 1
2 VIEW 3 1772 (1) 00:00:22
3 MINUS
4 SORT UNIQUE 3 492 1146 (1) 00:00:14
* 5 HASH JOIN OUTER 3 492 1145 (1) 00:00:14
6 NESTED LOOPS
7 NESTED LOOPS 3 408 675 (1) 00:00:09
* 8 HASH JOIN 42 4242 625 (1) 00:00:08
9 PARTITION LIST SINGLE 3375 148K 155 (2) 00:00:02 KEY KEY
* 10 TABLE ACCESS FULL OKC_MDL_WORKPLACE_ADDRESS 3375 148K 155 (2) 00:00:02 KEY KEY
* 11 INDEX RANGE SCAN PK_M_SY_FOREIGN_KEY 49537 2709K 469 (1) 00:00:06
* 12 INDEX UNIQUE SCAN UK_ODS_ORG_ADDR 1 1 (0) 00:00:01
* 13 TABLE ACCESS BY GLOBAL INDEX ROWID ODS_ORG_ADDR 1 35 2 (0) 00:00:01 ROWID ROWID
* 14 INDEX RANGE SCAN PK_M_SY_FOREIGN_KEY 49537 1354K 469 (1) 00:00:06
15 NESTED LOOPS
16 NESTED LOOPS 1 67 9 (12) 00:00:01
17 NESTED LOOPS 1 48 8 (13) 00:00:01
* 18 HASH JOIN 1 23 6 (17) 00:00:01
* 19 TABLE ACCESS BY GLOBAL INDEX ROWID ODS_COUNTRY_SYSTEM 1 11 2 (0) 00:00:01 ROWID ROWID
* 20 INDEX RANGE SCAN PK_ODS_DIVISION_SYSTEM 1 1 (0) 00:00:01
* 21 TABLE ACCESS FULL SY_SOURCE_CODE 8 96 3 (0) 00:00:01
22 TABLE ACCESS BY INDEX ROWID SY_FOREIGN_CODE 1 25 2 (0) 00:00:01
* 23 INDEX RANGE SCAN PK_SY_FOREIGN_CODE 1 1 (0) 00:00:01
* 24 INDEX UNIQUE SCAN PK_SY_TARGET_CODE 1 0 (0)
* 25 TABLE ACCESS BY INDEX ROWID SY_TARGET_CODE 1 19 1 (0) 00:00:01
26 SORT UNIQUE 3375 332K 626 (1) 00:00:08
* 27 HASH JOIN OUTER 3375 332K 625 (1) 00:00:08
28 PARTITION LIST SINGLE 3375 148K 155 (2) 00:00:02 KEY KEY
* 29 TABLE ACCESS FULL OKC_MDL_WORKPLACE_ADDRESS 3375 148K 155 (2) 00:00:02 KEY KEY
* 30 INDEX RANGE SCAN PK_M_SY_FOREIGN_KEY 49537 2709K 469 (1) 00:00:06
Predicate Information (identified by operation id):
5 - access("M"."TARGET_VALUE"="T"."ID_ORG_ADDR" AND "M"."VPD_COUNTRY"="T"."VPD_COUNTRY")
8 - access("M"."SOURCE_VALUE"="S"."WKP_ID_CEGEDIM" :SYS_B_12 S."ADR_ID_CEGEDIM" :SYS_B_13 S."ADDRESSTYP_COD" AND
"M"."VPD_COUNTRY"="S"."CTL_COUNTRY")
10 - filter(COALESCE("S"."END_VAL_DAT",TO_DATE(:SYS_B_14,:SYS_B_15))>=SYSDATE@!)
11 - access("M"."KEY_TYPE"=:SYS_B_11 AND "M"."VPD_COUNTRY"=:SYS_B_16)
12 - access("T"."ID_ORG_ADDR"="M"."TARGET_VALUE")
13 - filter(("T"."VPD_COUNTRY"=:SYS_B_08 AND COALESCE("T"."END_DATE",TO_DATE(:SYS_B_06,:SYS_B_07))>=SYSDATE@!))
14 - access("M"."KEY_TYPE"=:SYS_B_05 AND "M"."VPD_COUNTRY"=:SYS_B_08)
18 - access("CS"."ID_SYSTEM"="SK"."ID_SOURCE_SYSTEM")
19 - filter("CS"."SYSTEM_TYPE"=1)
20 - access("CS"."VPD_COUNTRY"=:B1 AND "CS"."EXP_IMP_TYPE"='I')
filter("CS"."EXP_IMP_TYPE"='I')
21 - filter("SK"."CODE_TYPE"=:SYS_B_18)
23 - access("FK"."ID_SOURCE_CODE"="SK"."ID_SOURCE_CODE" AND "FK"."SOURCE_VALUE"=UPPER(:B1) AND
"CS"."VPD_COUNTRY"="FK"."VPD_COUNTRY")
filter(("FK"."VPD_COUNTRY"=:B1 AND "FK"."SOURCE_VALUE"=UPPER(:B2) AND "CS"."VPD_COUNTRY"="FK"."VPD_COUNTRY"))
24 - access("FK"."ID_TARGET_CODE"="TK"."ID_TARGET_CODE")
25 - filter("TK"."CODE_TYPE"=:SYS_B_19)
27 - access("M"."SOURCE_VALUE"="S"."WKP_ID_CEGEDIM" :SYS_B_23 S."ADR_ID_CEGEDIM" :SYS_B_24 S."ADDRESSTYP_COD" AND
"M"."VPD_COUNTRY"="S"."CTL_COUNTRY")
29 - filter(COALESCE("S"."END_VAL_DAT",TO_DATE(:SYS_B_25,:SYS_B_26))>=SYSDATE@!)
30 - access("M"."KEY_TYPE"=:SYS_B_22 AND "M"."VPD_COUNTRY"=:SYS_B_27)
SQL_ID 862aq599gfd6n, child number 0
insert into okc_compare_results ( datetime
,compare_tables_id ,compare_target
,record_count ,groupby )
select sysdate ,:"SYS_B_00" ,:"SYS_B_01"
,count (:"SYS_B_02") ,:"SYS_B_03" groupby from ( (select
:"SYS_B_04" compare_type ,t.id_org_addr id_org_addr
-- ID_ORG_ADDR ,t.vpd_country vpd_country --
CTL_COUNTRY ,t.addr_type addr_type -- ADDRESSTYP_COD
from (select * from (select t.*
from ods.ods_org_addr t
left outer join
m_sy_foreign_key m on
m.vpd_country = t.vpd_country ; and
m.key_type = :"SYS_B_05" and
m.target_value = t.id_org_addr
Plan hash value: 3531428851
Id Operation Name Rows Bytes Cost (%CPU) Time Pstart Pstop
0 INSERT STATEMENT 1646 (100)
1 LOAD TABLE CONVENTIONAL
2 SORT AGGREGATE 1
3 VIEW 1 1646 (1) 00:00:20
4 MINUS
5 SORT UNIQUE 1 163
6 NESTED LOOPS OUTER 1 163 1067 (1) 00:00:13
7 NESTED LOOPS 1 135 599 (1) 00:00:08
* 8 HASH JOIN 19 1919 577 (2) 00:00:07
9 PARTITION LIST SINGLE 1535 69075 107 (4) 00:00:02 KEY KEY
* 10 TABLE ACCESS FULL OKC_MDL_WORKPLACE_ADDRESS 1535 69075 107 (4) 00:00:02 KEY KEY
* 11 INDEX RANGE SCAN PK_M_SY_FOREIGN_KEY 49537 2709K 469 (1) 00:00:06
* 12 TABLE ACCESS BY GLOBAL INDEX ROWID ODS_ORG_ADDR 1 34 2 (0) 00:00:01 ROWID ROWID
* 13 INDEX UNIQUE SCAN UK_ODS_ORG_ADDR 25 1 (0) 00:00:01
* 14 INDEX RANGE SCAN PK_M_SY_FOREIGN_KEY 1 28 468 (1) 00:00:06
15 NESTED LOOPS
16 NESTED LOOPS 1 67 8 (0) 00:00:01
17 NESTED LOOPS 1 48 7 (0) 00:00:01
18 NESTED LOOPS 1 23 5 (0) 00:00:01
* 19 TABLE ACCESS BY GLOBAL INDEX ROWID ODS_COUNTRY_SYSTEM 1 11 2 (0) 00:00:01 ROWID ROWID
* 20 INDEX RANGE SCAN PK_ODS_DIVISION_SYSTEM 1 1 (0) 00:00:01
* 21 TABLE ACCESS FULL SY_SOURCE_CODE 1 12 3 (0) 00:00:01
22 TABLE ACCESS BY INDEX ROWID SY_FOREIGN_CODE 1 25 2 (0) 00:00:01
* 23 INDEX RANGE SCAN PK_SY_FOREIGN_CODE 1 1 (0) 00:00:01
* 24 INDEX UNIQUE SCAN PK_SY_TARGET_CODE 1 0 (0)
* 25 TABLE ACCESS BY INDEX ROWID SY_TARGET_CODE 1 19 1 (0) 00:00:01
26 SORT UNIQUE 1535 151K
* 27 HASH JOIN OUTER 1535 151K 577 (2) 00:00:07
28 PARTITION LIST SINGLE 1535 69075 107 (4) 00:00:02 KEY KEY
* 29 TABLE ACCESS FULL OKC_MDL_WORKPLACE_ADDRESS 1535 69075 107 (4) 00:00:02 KEY KEY
* 30 INDEX RANGE SCAN PK_M_SY_FOREIGN_KEY 49537 2709K 469 (1) 00:00:06
Predicate Information (identified by operation id):
8 - access("M"."SOURCE_VALUE"="S"."WKP_ID_CEGEDIM" :SYS_B_12 S."ADR_ID_CEGEDIM" :SYS_B_13 S."ADDRESSTYP_COD" AND
"M"."VPD_COUNTRY"="S"."CTL_COUNTRY")
10 - filter(COALESCE("S"."END_VAL_DAT",TO_DATE(:SYS_B_14,:SYS_B_15))>=SYSDATE@!)
11 - access("M"."KEY_TYPE"=:SYS_B_11 AND "M"."VPD_COUNTRY"=:SYS_B_16)
12 - filter((COALESCE("T"."END_DATE",TO_DATE(:SYS_B_06,:SYS_B_07))>=SYSDATE@! AND "T"."VPD_COUNTRY"=:SYS_B_08))
13 - access("T"."ID_ORG_ADDR"="M"."TARGET_VALUE")
14 - access("M"."KEY_TYPE"=:SYS_B_05 AND "M"."VPD_COUNTRY"=:SYS_B_08 AND "M"."TARGET_VALUE"="T"."ID_ORG_ADDR")
filter("M"."TARGET_VALUE"="T"."ID_ORG_ADDR")
19 - filter("CS"."SYSTEM_TYPE"=1)
20 - access("CS"."VPD_COUNTRY"=:B1 AND "CS"."EXP_IMP_TYPE"='I')
filter("CS"."EXP_IMP_TYPE"='I')
21 - filter(("SK"."CODE_TYPE"=:SYS_B_18 AND "CS"."ID_SYSTEM"="SK"."ID_SOURCE_SYSTEM"))
23 - access("FK"."ID_SOURCE_CODE"="SK"."ID_SOURCE_CODE" AND "FK"."SOURCE_VALUE"=UPPER(:B1) AND
"CS"."VPD_COUNTRY"="FK"."VPD_COUNTRY")
filter(("FK"."VPD_COUNTRY"=:B1 AND "FK"."SOURCE_VALUE"=UPPER(:B2) AND "CS"."VPD_COUNTRY"="FK"."VPD_COUNTRY"))
24 - access("FK"."ID_TARGET_CODE"="TK"."ID_TARGET_CODE")
25 - filter("TK"."CODE_TYPE"=:SYS_B_19)
27 - access("M"."SOURCE_VALUE"="S"."WKP_ID_CEGEDIM" :SYS_B_23 S."ADR_ID_CEGEDIM" :SYS_B_24 S."ADDRESSTYP_COD" AND
"M"."VPD_COUNTRY"="S"."CTL_COUNTRY")
29 - filter(COALESCE("S"."END_VAL_DAT",TO_DATE(:SYS_B_25,:SYS_B_26))>=SYSDATE@!)
30 - access("M"."KEY_TYPE"=:SYS_B_22 AND "M"."VPD_COUNTRY"=:SYS_B_27)Edited by: BluShadow on 20-Jun-2012 10:30
added {noformat}{noformat} tags for readability. Please read {message:id=9360002} and learn to do this yourself.yes, all the used tables are analyzed.
Thanks, for pointing to the metalink bug, I have also searched in metalink, but didn't find this bug.
I have a little bit more information about the problem.
I use the following select (now in a readable format)
select count (1)
from ( (select 'different (target)' compare_type
,t.id_org_addr id_org_addr -- ID_ORG_ADDR
,t.vpd_country vpd_country -- CTL_COUNTRY
,t.addr_type addr_type -- ADDRESSTYP_COD
from (select *
from (select t.*
from ods.ods_org_addr t
left outer join
m_sy_foreign_key m
on m.vpd_country = t.vpd_country
and m.key_type = 'ORGADDR2'
and m.target_value = t.id_org_addr
where coalesce (t.end_date, to_date ('99991231', 'yyyymmdd')) >= sysdate) /*SGRB*/
where vpd_country = 'NL' /*EGRB*/
) t
where exists
(select null
from (select *
from (select m.target_value id_org_addr
,s.wkp_id_cegedim || '-' || s.adr_id_cegedim || '-' || s.addresstyp_cod id_cegedim
,s.*
from okc_mdl_workplace_address s
left outer join
m_sy_foreign_key m
on m.vpd_country = s.ctl_country
and m.key_type = 'ORGADDR2'
and m.source_value = s.wkp_id_cegedim || '-' || s.adr_id_cegedim || '-' || s.addresstyp_cod
where coalesce (s.end_val_dat, to_date ('99991231', 'yyyymmdd')) >= sysdate) /*SGRB*/
where ctl_country = 'NL' /*EGRB*/
) s
where t.id_org_addr = s.id_org_addr)
minus
select 'different (target)' compare_type
,s.id_org_addr id_org_addr -- ID_ORG_ADDR
,s.ctl_country vpd_country -- CTL_COUNTRY
, (select to_number (l.target_value)
from okc_code_foreign l
where l.source_code_type = 'TYS'
and l.target_code_type = 'ADDRLINKTYPE'
and l.source_value = upper (s.addresstyp_cod)
and l.vpd_country = s.ctl_country)
addr_type -- ADDRESSTYP_COD
from (select *
from (select m.target_value id_org_addr
,s.wkp_id_cegedim || '-' || s.adr_id_cegedim || '-' || s.addresstyp_cod id_cegedim
,s.*
from okc_mdl_workplace_address s
left outer join
m_sy_foreign_key m
on m.vpd_country = s.ctl_country
and m.key_type = 'ORGADDR2'
and m.source_value = s.wkp_id_cegedim || '-' || s.adr_id_cegedim || '-' || s.addresstyp_cod
where coalesce (s.end_val_dat, to_date ('99991231', 'yyyymmdd')) >= sysdate) /*SGRB*/
where ctl_country = 'NL' /*EGRB*/
) s)) The select is executed in 813 msecs
When I execute the same select using execute immediate like:
declare
ln_count number;
begin
execute immediate q'[<select statement>]' into ln_count;
end;This takes 3:56 minutes to complete.
When I change the second coalesce part (the one within the exists) in the flowing way:
the part
coalesce (s.end_val_dat, to_date ('99991231', 'yyyymmdd')) >= sysdate
is replaced by
s.end_val_dat >= sysdate or s.end_val_dat is nullthen the execution time is even faster (560 msecs) in both, the plain select and the select using the execute immediate. -
Crypto export control issues when redistributing the JRE
Does anyone have experience or knowledge about export control procedures when redistributing the JRE (or openssl for that matter) since it does contain crypto API's? I have tried to understand the US Export Administration Regulations (EAR) but I'm still unclear on this if I were to distribute from freshmeat or tucows. There are alot of references to an ECCD-5D002 list of software that I cant find. I believe the EAR states that if the software is on that list, that it is ok for exportation without review. I was hoping someone in the developer community could answer this foe me.
Thanks for the link. It answered some questions although not the one I'm asking here. I basically just need to know if I can bundle the JRE into an application and distribute it over the Internet or what I might need to do in order to do that.
-
When will the Sun Ray 3 DTU be released?
Hi ,
I heared that the Sun Ray 3 will be released on Feb. 2010.
Is it true？
Thanks
Edited by: tigerofcn on Feb 20, 2010 12:19 AMNobody knows when the iPod touch 6th generation is coming out. My best guess is this fall because according to the history, every iPod touch model was released in fall. I am like u too, I want an iPod 5 but I want to know when the 6th generation is coming out so I can get it.
Hope this helped,
Jojome54 -
IPod screen goes black & heats up when connecting to computer - pls help!!
I posted this same question on somebody else's post but thought id post it under a different subject so someone may be able to help.
Im having a problem with my 30GB ipod in that it works fine when just listening with head phones, on my docking station or via my car stereo yet not on computer. When i connect ipod to any computer the ipod screen fades out, goes black & then the ipod becomes quite hot (more near the left hand side of control wheel) and both computer & i-tunes does not recognise it?? Does anybody have any ideas or have had the same problem and fixed it? I pod is nearly 2.5yrs old. thanksHave you tried a different USB port or a different USB docking cable? It is also possible that the part of the iPod that charges the battery is faulty, or perhaps the battery itself. If it's a 4th gen iPod, the battery is located under the click wheel, more to the left side than to the right. I don't have a 5th gen "video" iPod, but based on the guide here
http://www.ifixit.com/Guide/iPod/iPod-5th-Generation-Video/95
the battery appears to be toward the top of the iPod.
FYI - Here's the guide for the 4th gen iPod.
http://www.ifixit.com/Guide/iPod/iPod-4th-Generation/93
Whatever the problem, it appears to be related to charging the battery. -
Regarding Issue when Exporting the Output of the Discoverer Report to Excel
Hi,
Can Any of you guys help me out in this issue. I am exporting the Discoverer Report Output to Excel sheet, I am able to export but while I am opening the excel sheet I am getting an error saying "UNABLE TO READ FILE".
Please help me out in this Issue, it is so urgent.
Thanks in Advance..
Raja.Hi,
Is there any way to export the output of scheduled Discoverer Reports to a particular server using Discoverer plus.Only by openning and exporting each report manually.
is there any way to get the output name in a particular syntax. I want to concatenate date in the output name.Only by entering the filename when you do the export.
The best way to do this is to use Discoverer Desktop and a third party scheduler. Then you can export all your reports automatically and define the filename used in the output. Search this forum for more information on third party schedulers.
Rod West -
How do I get rid of those annoying white-on-black "?" marks that pepper the text on some web pages
They don't appear in IE. "?" characters are on diamond shaped black background and overwrite characters underneath making it difficult to read the text.
A diamond indicates a problem with the font or the content of a web page. You get a diamond if the page uses an 8 bit encoding and the character can't be mapped. A possible cause is that the text was copied from another (Unicode) source and pasted on that website. IE probably shows a white box or nothing in such a case. It is also possible that the page is send with the wrong encoding by the server.
Can you post a link to a page where you see that? -
Issue When cancel the SD-Billing Document
Hi,
When i cancel the billing document It should debit the Sales account with posting key 40 & credit the Customer Account with posting key 12 (Reverse invoice).
But in my case it is debiting the Sales account with Posting key 40 and Credit the customer with posting key 11(Credit memo) which is wrong posting key in this case.
Kindly advice me how to correct this wrong posting key issue and how can i fix this with correct posting key 12 instead of 11?
Kindly help me and give some inputs.
Thanks
SupriyaDear Supriya
Go to OB40 and double click on the required Transaction. Place your mouse on the G/L Account and click on top "Posting Key". Check what is maintained there.
thanks
G. Lakshmipathi -
Issue when processing the variable screen Bex 7.0
Hi,
We have a issue where in a query the variables that the user selects are being ignored and the query runs wide open.
Esentially what happens is when you open a query, execute it and then close and again open a different query, the varaibles from previous query selection are carried and even if you change the variable values the user selects are neglected and query rund wide open.
Please let me know if you have encountered such an issue.
Thanks,There is no such known issue like this.
However, you can check with SAP GUI patch level, Things are working fine with patch level 8 for SAP GUI 710.
There are lot of compatability issues here and there with GUI710 with MS Excel 2003..
Regards,Vj
Edited by: Vijay kumar Nandipati on Jan 28, 2009 8:04 PM
Edited by: Vijay kumar Nandipati on Jan 28, 2009 8:05 PM -
Issue when Calling the RFC from external system
Hi,
I have created one RFC, in which I am using one function module to get the material customer status.
Functional Module name is "QC01_BATCH_VALUES_READ".
When I run this in SAP, it is giving a value for Cusotmer Status. But when this RFC is called from .Net system it is not returning any value for this field.
Even I used a different function module 'CLAF_CLASSIFICATION_OF_OBJECTS' for the same, in this also in SAP it is doing good, but when it is called from .Net, the program is giving dump.
Please help me to resolve this issue
Thanks
RaviHi Ravi,
Issue can be either in the .NET program or in the RFC destination creation.
1)
Check whether data types of .NET program which is calling the SAP function module are correct.
If there are issues with data types, program dont report if you dont so explicitly.
2) Check whether RFC destination you are giving in your .NET program is correctly configured in
SAP , verify by testing the same.
Apart from above two reasons, I dont see any other major reasons for not getting correct results.
Regards
Krishna
Maybe you are looking for
-
SWF flickers/flashes when moving between pages
IDCS4 export to SWF with page transitions. Not sure if anyone else is having this problem, but when I navigate between pages, the interactive items/buttons seem to flash or flicker once after each transition. Does anyone know how to resolve? I'm buil
-
My iphone wont sync i get -9808 error message
DOES ANYONE GET A -9808 ERROR MESSAGE WHEN TRING TO SYNC TO ITUNES I TRIED DEAUTHERIZING AND GET THE SAME MESSAGE
-
After installing the ML, the system can not complete the work, if you open Mail.( Does anyone have any similar problem? P.S. (I apologize for my English. I use a translator.)
-
Org.osgi.framework.BundleException when Running the script
Hi when ever i run the test script. in console i can see the org.osgi.framework.BundleException. it looks like as below, please help on it, can anyone tell me the cause and how fix this? org.osgi.framework.BundleException: The bundle could not be res
-
Trying to transfer PS CS 4 to a new computer. I'm a little lost
The files appeared to transfer from old dinosaur machine to the sleek new Mac Book Pro, but am getting an error code 150:30. What do I do? I do not have the product key anymore...many moves.