Who is Right: Tomcat or IPlanet?

As I am reworking the authentication infrastructure for medium sized J2EE application. And I have been writing a simple war to test some strategies.
My test war uses a simplified servlet controller ala Pet Store. In effort to protect some 'stuff' from being 'called' directily w/o going thru a controller, I installed a security contraint on a URL pattern and its role is set to 'nobody' - which is not a role in our security realm (LDAP).
Now the proteced URL contains JSPs that are forwared to by the controller, (which is protected but by a different constraint - that does have defined roles in our realm).
Tomcat (4.0.2) has no problem allowing the controller to do a RequestDispatcher.forward() to a JSP in the protected URL pattern. iAS 6sp3 (Solaris) generates a 'not authorized' error when attempting to forward to a protected URL.
I guess I am thinking maybe iAS has it right: wether I went to the URL directly or thru a forward - the current login doesn't have privs to access the URL.
Who is correct? Also, a co-worker has run a similar test on Weblogic 6 and it appears to behave like Tomcat.
The ultimate objective is to protect the JSPs from direct calls. What might be another strategy? Put them under WEB-INF? Where would one forward to in this setup?
-Fred

You need to visit the TalkTalk forum, as this forum is for BT Broadband customers.
Here is the link.
The TalkTalk Members Forums
Openreach are a separate company, and are nothing to do with BT Retail.
You should be able to get advice on speed issues on the TalkTalk forum, and raise the speed issue with them. They can arrange a visit from Openreach if needed.
If you are 2KM away from the nearest cabinet, you may simply be on a "faster broadband" type of service.
As you are only three months into a contract, you would have to wait until it ended, or pay cancellation charges.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

Who's right?

Hello,
I was having a look to some documentation.
In the official "Creative Suite Extension Builder" documentation, in the "Product-specific Guides > InDesign Guide" chapter, I found this:
Custom menus in InDesign
The menu items for extensions that you create with Adobe Creative Suite Extension Builder can only be shown in the menu Window > Extensions. If you want to start your extension from another menu, you can do so using an InDesign C++ plug-in. Your C++ menu plug-in must launch your Flash-based extension using the C++ PlugPlug API. To prevent your extension from being displayed in the Window > Extensions menu, remove the menu name from the extension manifest.
For information on how to create a custom menu placement plug-in and how the plug-in can talk to your extension see the InDesign CS5 SDK (http://www.adobe.com/devnet/indesign/sdk/). .
Once you have created both the C++ plug-in and Flash-based components of your extension, bundle them together for distribution as a hybrid extension. For details, see the Signing and Packaging Toolkit, which you can download from the Adobe Creative Suite SDK page, http://www.adobe.com/devnet/creativesuite/.
But, inside the InDesign CS5 SDK, I found this on the "feature-development-with-scripting.pdf" (see page 23):
Overriding default menu placement
N O T E : Overriding the default menu position is supported by InDesign, but not yet by other Creative Suite applications.
By default, CSXS supports a single main menu item, which appears in the application’s Window > Extensions menu. Extension developers may prefer a different menu location. InDesign sup- ports a Menu element and Placement attribute in the manifest.xml that allows an extension to override the default menu position. For example:
<Menu Placement="'Main:&Window',600.0,'KBSCE Window menu'">FlexUIStroke</Menu>
The Placement attribute needs to be created with care. See the FlexuUIStroke code for a more precise example (without a line break).
Strings must be enclosed in single quotes.
Commas (without white space) are used to separate fields.
Who's right?
Thank you,
Luca

Well, I have not tried either of those methods myself; but, they do work.
If all you want to do is place the menu in a custom location, using the InDesign specific menu placement tag is the easiest, best, and recommended solution.
In the latest SDK update we've included event support for InDesign, Photoshop, and Illustrator. That opens yet one more door for you.
If your needs are significantly more complex, by that I mean -
You need fully custom menu structure (such as adding your own menu to the main, with a menu tree under that)
You need to turn menu items on or off based on application/document state
You need to create and manage context menus
Here's how you would go about it:
            mainMenu = InDesign.app.menus.item( "$ID/Main" ).submenus.add( "My Menu" );
            var handler1Action: ScriptMenuAction = InDesign.app.scriptMenuActions.add( "The First Menu" );
            IDScriptingEventAdapter.getInstance().addEventListenerToObject( "onInvoke", myEventHandler, handler1Action )
            var handler1MenuItem: MenuItem = mainMenu.menuItems.add( handler1Action, LocationOptions.AT_END );
        public function myEventHandler( evt: Event = null ): void
            trace( "Menu Event fired" );
To do context menus, I would suggest looking at Ole's extendscript examples and simply extrapolating that technique to ActionScript and using the IDScriptingEventAdapter for event support.
Regards
Bob

When backing up using the G Drive on using time machine my wife drops the icon into the trash icon on the loading dock. I told her this was not correct. Who is right? Thanks in Advance.

Folks,
I found my wife dropping the icon of her backup file into the trash icon on the dock. She had just completed using Time machine and when to uninstall the Gdrive. I told her this was an erroneous practice. She disagreed. Who is right?
Thanks in advance.

http://www.g-technology.com/kbase/files/G-RAID-Manual-Unmount.pdf
Hope this helps.

Web.xml - Tomcat vs iPlanet

I have a web application which was written using Forte with its built-in Tomcat engine. The application works fine in this environment.
I created a war file and put the application on our iPlanet server using wdeploy. I can open a JSP in the document root, but all of the servlets give the error "HTTP 404 - File not found".
Is there a difference in how the servlets must be referenced in the web.xml file for iPlanet vs Tomcat???

Weblogic7.0 requires that servlets be mapped to a
url:
<servlet-mapping>
<servlet-name>KioskServlet</servlet-name>
<url-pattern>/DriverKiosk.html</url-pattern>
</servlet-mapping>
I don't know specifically about websphere but I
suspect that may be the problem.The servlet was mapped to a URL.
The problem was that Forte did not require a leading slash, while iPlanet did require the slash:
Forte:
<url-pattern>myServlet</url-pattern>
iPlanet:
<url-pattern>/myServlet</url-pattern>

Who has rights to change email address

Who do I email to have my email address for which I have posted a few
questions changed on this site to the above address.

You can cancel your own message.
Depending on the software you are using it may be done differently.
In outlook express, it's under "Message, Cancel Message."
The configured email address in your client must match that of the message
posted in the newsgroup.
Unfortunately, this may not cancel the message from every system that
mirrors the Novell forums.
Craig Wilson - MCNE, MCSE, CCNA
Novell Support Forums Volunteer Sysop
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared either Novell or any rational human.
"Dan Russo" <[email protected]> wrote in message
news:Qbh3i.3436$[email protected]..
> Craig can my question on Jan 25th be removed? I'm being audited for using
> our company name in my address.
>

Who's right - JDK 1.6 stax or WoodStox?

Hi all...
I have a serious problem with switching between aforementioned technologies and I'm confused which one works properly. My case is easy - I have XML that starts like this:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE field-specification SYSTEM "http://xxx/dtd/field-specification.dtd">And I have following naive code:
XMLInputFactory xmlif = XMLInputFactory.newInstance();
XMLStreamReader reader = xmlif.createXMLStreamReader(sourceReader);Now using WoodStox it ends like:
com.ctc.wstx.exc.WstxIOException: xxx
     at com.ctc.wstx.sr.StreamScanner.throwFromIOE(StreamScanner.java:650)
     at com.ctc.wstx.sr.BasicStreamReader.next(BasicStreamReader.java:1071)
     at sk.bgs.swift.XMLUtils.prepareXmlReader(XMLUtils.java:159)
Caused by: java.net.UnknownHostException: xxxAnd I need following line to tell WoodStox "please, ignore that DTD":
xmlif.setProperty(XMLInputFactory.SUPPORT_DTD, false);Now it works... if I switch to JDK 1.6, it works. If I drop Woodstox from classpath, using JDK 1.6 stax impl it stops to work with:
javax.xml.stream.XMLStreamException: ParseError at [row,col]:[2,10]
Message: DOCTYPE is disallowed when the feature "http://apache.org/xml/features/disallow-doctype-decl" set to true.So these versions are mutualy exclusive and I can't just compile it once. Not to mention that running the original example (usable with JDK 1.6 Stax Impl but with Woodstox in classpath) on 1.6 ends with stupid messages:
java.lang.IllegalStateException: Can't overwrite cause
     at java.lang.Throwable.initCause(Throwable.java:320)
     at com.ctc.wstx.compat.Jdk14Impl.setInitCause(Jdk14Impl.java:70)This hardly tells you anything and it's also hard to claim that it is working like on JDK 1.5. ;-) However - here is final version of the code - that works in 1.5 with Woodstox and in 1.6 with both:
XMLInputFactory xmlif = XMLInputFactory.newInstance();
if (xmlif.getClass().getName().equals("com.ctc.wstx.stax.WstxInputFactory")) {
xmlif.setProperty(XMLInputFactory.SUPPORT_DTD, false);
XMLStreamReader reader = xmlif.createXMLStreamReader(sourceReader);Ok, this is first story... the second one is also interesting. I have line in XML like this:
<prim name="y">[-A-Z0-9.,()/='+:?!"%&*; ]</prim>Now Woodstox has really no problem with it while with JDK 1.6 implementation just doesn't want to eat those entities and I'm pretty out of options how to make THIS working in both implementations. Not to say that I'm not sure which one is right.
But in this second case Woodstox is winner for me from logical point of view. Why is that & interpreted? Why reader.getText() returns only string up to % and stops there? There is no exception in implementation - of course - just my logic stops to work.
Have anyone run into similar problems?
Thanks for any hints and tips how to make such a things work in both cases.
Virgo47

First thing: what does this mean for JDK 1.6? Will it be changed in some update?
Second thing: Yes, I can. ;-)
<prim name="y">[-A-Z0-9.,()/='+:?!"%&*; ]</prim>I have a reader positioned just at the start of the text that is between the tags. Now reader.getText() Woodstox returns the string all way to the last ] included - like expected. Now I'm not really sure if it changes that entity to actual & sign, but that doesn't matter now. Problem with JDK 1.6 is that it returns only string ended with % and when I suggest the reader that I want to read end tag, it fails - because it is not positioned on the </prim> yet.
I don't know which impl is right thou. Woodstox is more logical for me.

ASP suggests alternative part, IBM says they're not compatible - who's right?

Hi there,
I've got T60p, recently fan has started to produce some loud noises. I took a look inside, carefully cleaned it up, but no change,I'm pretty sure the fun is just failing.
The laptop is in warranty, so no problem except I use it quite extensively and prefer the repair to be as quick as possible. I got in touch with an Authorized IBM Service Provider which was willing to replace fan in an hour time. That would mean no mailing hassle, no weeks long waiting, etc., just great!
But... (there're always buts?..)
The laptop type is 2007-8JG, according to the Hardware Maintenance Manual the fan part number is 41W6407. But the Service Provider claims it's not possible anymore to order the 41W6407 (because it's obsolete) and instead they are to order an alternative, compatible one (part number 41V9932).
I am aware that these numbers are important and tiny differences between parts could result in serious hardware problems. Especially when it comes to cooling systems... And that is why I do prefer to have the one listed in the manual.
I called IBM Technical Support, the agent was not able to answer the question straight, but promised to discuss it with the engineers and get back to me later. They called me back the same day and the official answer is 'though both parts are very similar they're not compatible'.
Would you believe the SP in such a situation? 'Instant' repair is a strong temptation...But on the other hand IBM is suppose to know better what's good for their laptops, right?.. So I tend not to believe the Service Provider...
Any advices?..
rm
T60p, 2007-8JG - just amazing piece of engineering!

rmrmpl, welcome to the forum,
Having looked at the parts list you need the 41W6407. Other machines are listed against the 41V9932.
For whatever reason the fans are different; I would believe IBM.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Who's right and who's wrong as far as battery is concerned??

There are so many different viewpoints when it comes to taking care of the Mac battery. I just read that "Apple does not recommend leaving your portable plugged in all the time."
How come so many of you go against Apple's recommendation and think it's best to keep it plugged in all the time whenever possible? I'm very confused about how to take care of the battery.

Kappy wrote:
I'm sure in many cases what you say is true. But the "memory" effect has been pretty well documented elsewhere.
Nickel-cadmium does not like to be pampered by sitting in chargers for days and being used only occasionally for brief periods. A periodic full discharge is so important that, if omitted, large crystals will form on the cell plates (also referred to as memory) and the nickel-cadmium will gradually lose its performance.
See also This page.
This is intended for clarification, not criticism.
I understand there are some serious limitations to NiCad - not the least which is cadmium toxicity. Still - there is no better battery chemistry for things like power tools, where the super-low internal resistance means far better efficiency with high drain devices.
I just recall that a lot of the calls to fully cycle NiCads on every opportunity might have been misplaced. Batteries simply lose capacity over time, and a good many people saw their gradual loss of capacity as a sign that they were suffering from "the memory effect". Even so, I have a AA/AAA battery charger with a so-called "conditioning" feature which drains the battery down until it reads 1V and then cycles. The manufacturer recommended this step every time for NiCads and once every 10 charges for NiMH. I also have one of their chargers with a "flex pulse" charge algorithm which they claim makes conditioning unnecessary by eliminating crystal formation. I once tried measuring voltage on a charging cell, and it was constantly varying the voltage as it charged.
However - I'm not sure how critical deep cycling is for ultimate longevity. The ideal situation for battery longevity is to only make use of the center of the charge range - what hybrid car owners call the "Sweet Spot". Something like a Toyota Prius tries to keep the battery range between 40-75% and can go through hundreds of thousands of these smaller cycles, when a traditional cell (using more of the charge range) is rated for 500-1000 cycles.

Who is right? Sql 2005 SSMS view of table or INFORMATION_SCHEMA?

We scripted an old sql 2005 table under Management Studio and got this:
CREATE TABLE [dbo].[TestTable](
[myId] [int] IDENTITY(1,1) NOT NULL,
[Item_#] [char](8) NOT NULL,
[Count] [smallint] NOT NULL,
[ProductName] [char](45) NOT NULL,
[U_Item_#] AS (upper([Item_#])),
Notice that U_Item_# computed column appears in the 5th ordinal position from the top.
Next I ran this query:
     select table_ProductName, column_ProductName, ordinal_position
    From INFORMATION_SCHEMA.COLUMNS
    where table_ProductName = 'TestTable'
Results returned:
table_Name      column_Name       ordinal_position
TestTable         myId                   1
TestTable         Item_#                2
TestTable         U_Item_#            3
TestTable         Count                   4
TestTable         ProductName        5
TestTable         U_ProductName     6
Notice that U_Item_# is now in ordinal positon 3 which is not the same as that returned by the script.
Which one is to be believed? (SSMS or INFORMATION_SCHEMA.COLUMNS)
TIA,
edm2

This is what I got in SQL Server 2014, same as CREATE TABLE:
select table_name, column_name, ordinal_position
From INFORMATION_SCHEMA.COLUMNS
where table_name = 'TestTable'
TABLE_NAME COLUMN_NAME ORDINAL_POSITION
TestTable myId 1
TestTable Item_# 2
TestTable Count 3
TestTable ProductName 4
TestTable U_Item_# 5
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Can't Connect attendee's who have right Equip/bandwidth

I have a new g5 able to host multi vid conf's..the 2 people I want to join both have g4's with 1.33mhz...and more than the required 100mbps connection. Only one person has the 3 camera icon indicating he can joing the multi vids conf. Is there a setting we are missing? We all have Ichat AV3.0...and Tiger.
Please help.

HI Dj,
Loss of the Stacked iCons is normally a "Housekeeping" issue where the Cron scripts do not run.
See here as to Why and links to Utilities Gulliver, "kmosx3: Mac OS X 10.3/10.4: System maintenance", 05:15am Mar 27, 2004 CDT
Ralph
EDIT : EZ Jim ??

How do I restrict content provider edit rights to a single region on a page

We have a 2-level security requirement for Portal pages that are accessed by "the general public" - users that do not log into Portal. I'll call this population "The Public".
Top Level Edit Security
Web-masters need to edit all content on any page in any page group.
Sub-Level Edit Security
Content providers need to be restricted to editing HTML content within a single region on all pages within a single page group. They will use the RTE (FCKeditor) to edit the content of the restricted region.
One idea I tried was creating a nav page as a portlet and placing the portlet on the page. This seemed satisfied all the requirements. The drawback is having to create a new nav page for each page created. Since the content and pages are mostly static this does not seem, to me, to be a big deal.
I next tried Item level Security, created a group (publicusers) that included PUBLIC and ContentProvider users and granted "view" to the "publicusers" group . I found that "The Public" can see the entire page, except for the Text Item Type that is under Item Level Security. Only by turning off Item Level Security can "The Public" see Text Item Type. (This action seems to be supported in the documentation as well.)
Any other ideas on how to implement multi-level content security on pages within a page group? There will be at least 18 page groups, each with a unique content provider. The content provider can not edit content outside of their designated page group.
Thx.
--Don

I would recommend creating pages for each "chunk" of content that needs specific security. Set the security at the page level.
Then, publish those pages as portlets, and stick those portlets in the regions that need "per group" edit rights. For each portlet, display the Edit link. Users who have rights to edit the portlet's source page will see the edit link, and can edit that content "in place".
Does this help?
-John

Who runs this company and where are they hiding?

How is it that Verizon has no problem taking your money.......but has no desire to give back what is yours? I returned something for $265.00 almost a year ago and no credit has yet to be seen. I have had my service turned off several times and also the $5.00 late fee. No one.... I mean NO ONE that I have talked with which includes managers on the phone and managers in the store can handle this problem. However I keep getting those harassing phone calls and texts about my service being turned off. I am so tired of being harassed by Verizon not to mention all the time they have taken out of my schedule and my life to stay on the phone to figure things out. It has been a year gone by and they want me to hold on the phone will they attempt to figure this out....WHO has this kind of time? How many times do you have to tell someone a story to get things done? They are harassing me over something that is their mistake......they need to be held accountable and quit harassing people and fix their issues. Where are the people that wear the pants in this company? That is who I want to talk to. Not someone who has no authority to help a customer who is right and they are the ones WRONG.

I am sorry to learn that you have some unresolved billing concerns Terrina! Your satisfaction & billing accuracy are paramount to us! Please reply to the direct message that I sent you and I will review your account for accuracy
AntonioC_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

How to use tld files in iPlanet

Hai Friends,
I don't know basic stuff of iPlanet. plz help me. I have developed one application in tomcat. Now i need to move that application from tomcat to iPlanet 6.0(Solaris). When i deployed it in iPlanet i am geting following exceptions plz guide me
[02/May/2006:17:40:18] failure (26802): Internal error: servlet service function had thrown ServletException (uri=/ACM/jsp/bottom_pa
ge1.jsp): org.apache.jasper.compiler.ParseException: /user3/acm/iplanet/servers/ACM/jsp/bottom_page1.jsp(2,0) Page directive: Invali
d attribute, pageEncoding, stack: org.apache.jasper.compiler.ParseException: /user3/acm/iplanet/servers/ACM/jsp/bottom_page1.jsp(2,0
) Page directive: Invalid attribute, pageEncoding
at org.apache.jasper.compiler.JspUtil.checkAttributes(JspUtil.java:237)
at org.apache.jasper.compiler.Parser$Directive.accept(Parser.java:194)
at org.apache.jasper.compiler.Parser.parse(Parser.java:1077)
at org.apache.jasper.compiler.Parser.parse(Parser.java:1042)
at org.apache.jasper.compiler.Parser.parse(Parser.java:1038)
at org.apache.jasper.compiler.Compiler.compile(Compiler.java:218)
at org.apache.jasper.servlet.JspServlet$JspServletWrapper.loadJSP(JspServlet.java:193)
at org.apache.jasper.servlet.JspServlet$JspServletWrapper.access$4(JspServlet.java:167)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:477)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:589)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.iplanet.server.http.servlet.NSServletRunner.invokeServletService(NSServletRunner.java:897)
at com.iplanet.server.http.servlet.WebApplication.service(WebApplication.java:1065)
at com.iplanet.server.http.servlet.NSServletRunner.ServiceWebApp(NSServletRunner.java:959)
, root cause:
[02/May/2006:17:40:18] info (26802): JSP11 Log:Warning: Unknown element tag-class in tag
[02/May/2006:17:40:18] info (26802): JSP11 Log:Warning: Unknown element body-content in tag
[02/May/2006:17:40:18] info (26802): JSP11 Log:Warning: Unknown element variable in tag
[02/May/2006:17:40:18] info (26802): JSP11 Log:Warning: Unknown element variable in tag
[02/May/2006:17:40:18] info (26802): JSP11 Log:Warning: Unknown element variable in tag
[02/May/2006:17:40:18] info (26802): JSP11 Log:Warning: Unknown element variable in tag
[02/May/2006:17:40:18] info (26802): JSP11 Log:Warning: Unknown element variable in tag
[02/May/2006:17:40:18] info (26802): JSP11 Log:Warning: Unknown element variable in tag
[02/May/2006:17:40:18] info (26802): JSP11 Log:Warning: Unknown element tag-class in tag
[02/May/2006:17:40:18] info (26802): JSP11 Log:Warning: Unknown element body-content in tag
[02/May/2006:17:40:18] info (26802): JSP11 Log:Warning: Unknown element variable in tag
[02/May/2006:17:40:18] info (26802): JSP11 Log:Warning: Unknown element variable in tag
[02/May/2006:17:40:18] info (26802): JSP11 Log:Warning: Unknown element variable in tag
[02/May/2006:17:40:18] failure (26802): Internal error: servlet service function had thrown ServletException (uri=/ACM/jsp/header.js
p): org.apache.jasper.compiler.CompileException: /user3/acm/iplanet/servers/ACM/jsp/header.jsp(101,0) Unable to load class null, sta
ck: org.apache.jasper.compiler.CompileException: /user3/acm/iplanet/servers/ACM/jsp/header.jsp(101,0) Unable to load class null
at org.apache.jasper.compiler.TagBeginGenerator.init(TagBeginGenerator.java:128)
at org.apache.jasper.compiler.JspParseEventListener$GeneratorWrapper.init(JspParseEventListener.java:753)
at org.apache.jasper.compiler.JspParseEventListener.addGenerator(JspParseEventListener.java:132)
at org.apache.jasper.compiler.JspParseEventListener.handleTagBegin(JspParseEventListener.java:903)
at org.apache.jasper.compiler.DelegatingListener.handleTagBegin(DelegatingListener.java:188)
at org.apache.jasper.compiler.Parser$Tag.accept(Parser.java:825)
at org.apache.jasper.compiler.Parser.parse(Parser.java:1077)
at org.apache.jasper.compiler.Parser.parse(Parser.java:1042)
at org.apache.jasper.compiler.Parser.parse(Parser.java:1038)
at org.apache.jasper.compiler.Compiler.compile(Compiler.java:218)
at org.apache.jasper.servlet.JspServlet$JspServletWrapper.loadJSP(JspServlet.java:193)
at org.apache.jasper.servlet.JspServlet$JspServletWrapper.access$4(JspServlet.java:167)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:477)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:589)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.iplanet.server.http.servlet.NSServletRunner.invokeServletService(NSServletRunner.java:897)
at com.iplanet.server.http.servlet.WebApplication.service(WebApplication.java:1065)
at com.iplanet.server.http.servlet.NSServletRunner.ServiceWebApp(NSServletRunner.java:959)
, root cause:
(END)

Thank u Very much.
And small doubt again. I am writing one custom tag in my application for that we need one tld file. In tomcat i wrote like this
<tag>
<name>Menu</name>
<tag-class>com.citigroup.acm.taglib.MenuTag</tag-class>
<body-content>JSP</body-content>
<variable><name-given>parentId</name-given></variable>
</tag>
but in iPlanet i modified(insted of tag-class i used tagclass) like the following, b'coz i got some exceptions
<tag>
<name>Menu</name>
<tagclass>com.citigroup.acm.taglib.MenuTag</tagclass>
<body-content>JSP</body-content>
<variable><name-given>parentId</name-given></variable>
</tag>
Now i am getting error at <variable> how to handle that plz help me

Does refreshing a report that includes Scope and Entity require elevated rights / permissions?

This relates to the following thread:
Why does refreshing a report in the EPM Add-In need to edit the Ownership Manager?
Since I've received no responses on the above thread, I thought I might approach this from a different angle.
If we have a report that includes both Scope and Entity, in SAP BPC 10 NW (801 SP03) / EPM Add-In 10.0 SP 16 Patch 1, does this require a user to have elevated permissions in order to refresh the report? I ask because I have users who have rights to view reports, but they error out when they try to refresh a report's data, only where Scope and Entity are used in the report. The tasks that error are:
P0081
Run Consolidation Tasks
P0082
View Ownership Manager
P0083
Edit Ownership Manager
I do not understand why any of these should even be called by refreshing the report, as the user is simply "viewing" data that already exists in the environment.
Can someone please shed some light on this or point me in the direction of how I can go about resolving this issue?
Your help is greatly appreciated.
Jeff

Hi
I am facing the same issue despiste the elevated app permission as per
https://msdn.microsoft.com/en-us/library/office/jj822159.aspx?f=255&MSPPError=-2147217396
I still had the error 401
the solution for me was
Under list settings -> advanced settings update the Create and Edit access settings from "Create and edit all items"
the add the user the right to add only ( no edit , no delete) .
Eric Caron

Tomcat 4.0, startup, windows me

Hi,
Is there anyone who is using tomcat 4.0 to develop JSP under windows me?
My problem is that I even can't start tomcat.
After I run "startup.bat" under d:\tomcat40\bin, it opens 1 MS-DOS window. Few seconds, it opens another MS-DOS window, but that window disappears soon.
Then the first window indicated that it has finished, and the screen's print is:
"Using CATALINA_BASE: d:\tomcat40
Using CATALINA_HOME: d:\tomcat40
Using CLASSPATH: d:\tomcat40\bin\bootstrap.jar;d:\jdk1.3.1_02\lib\tools.jar
Using JAVA_HOME: d:\jdk1.3.1_02"
I don't know what's going on.
Any suggestions will be appreciated.
Thanks ahead!
Michael

You could try giving more memory to the initial
enviroment. I use 4096.Under /bin/ directory, there are 8 .bat files.
After I set "startup.bat" 's memory property to be 4096, the problem remains same, ie. the second window disappear soon.
I tried to execute "catalina.bat" under /bin/ directory, the output is:
"Using CATALINA_BASE: d:\tomcat40
Using CATALINA_HOME: d:\tomcat40
Using CLASSPATH: d:\tomcat40\bin\bootstrap.jar;d:\jdk1.3.1_02\lib\tools.jar
Using JAVA_HOME: d:\jdk1.3.1_02
Bad command or file name
Runs a Windows program or an MS-DOS program.
START [options] program [arg...]
START [options] document.ext
/m[inimized] Run the new program minimized (in the background).
/max[imized] Run the new program maximized (in the foreground).
/r[estored] Run the new program restored (in the foreground). [default]
/w[ait] Does not return until the other program exits.
Bad command or file name
Commands:
env - Set up environment variables that Catalina would use
run - Start Catalina in the current window
start - Start Catalina in a separate window
stop - Stop Catalina
What "Bad command or file name" means?
Thanks ahead!
Michael

Who is Right: Tomcat or IPlanet?

Similar Messages

Maybe you are looking for