Why after firmware update to Airport Express 2nd generation on 12 Aug can I not wirelessly access access hard disks connected to airport

During the firmware install there was a problem so that the status light on airport express was amber. It would change to gree for a short while after re-plugging the USB connection between the Airport and hard desk drives (via a hub).
I can see the hard disks listed on the macbook (OSX 10.7.5) finder but not the files on the desks. The hard desk listing have also come up on the imac (OSX 10.6.8) but not often and again there are no files listings available.
A Brothers LaserJet printer sometimes also connected to the hub and then airport also sometimes requires a re-plugging of the USB connection between the hub and airport.

Apple uses Akamai for their software distribution.
See
http://support.apple.com/kb/ht3923
The latter (http://swcdn.apple.com) currently redirects to the Akamai content distribution network that hosts the updates. Note that the redirected IP address of http://swcdn.apple.com may vary over time or by geographic region.
and https://itunes.apple.com/us/app/akamais-state-of-the-internet/id800491468?mt=8
Many of the large computer companies use akamai for software.. so it may have picked up those addresses from clients behind the Express.. although normally their IP should show directly.

Similar Messages

HT1476 Why after installing i0s7.0 to my Apple 4 I phone I can no longer charge it with a hydro connection. It did it before this update

Why after installing i0S7 to my Apple i phone 4 I can no longer charge my phone by plugging it into electricity. I could before and now since this update it now longer works. How can I fix this?

Are you using a genuine Apple power adapter? iOS 7 will prevent certain non-Apple power adapters from operating due to safety concerns.
Counterfeit chargers are dangerous and potentially lethal.
http://www.apple.com/support/usbadapter-takeback/
The program ends October 18, so don't wait.

After I updated my iPhone 4S to iOS 6.0, I can't not get any of previous purchased apps from 'update' in App Store. After pressed 'Purchases', it went into blank thinking screen for a while then it went back to home screen. Please help!

Please help!

Yes, i'v already signed in apple & the iCloud is on as usual, but it is still not working.
I have no problem to download the new app or redownload the apps I'v purchased before at 'search tab', but I can't get a list of my previous purchased but not installed on my iPhone Apps at the 'Updates/Purchases tab' in App Store. I never had this problem until I updated my iPhone 4S software from iOS 5 to iOS 6.

After a firmware update to airport express should I unplug the unit then plug it back in? (bascially reboot it)

After a firmware update to airport express should I unplug the unit wait a bit and plug it back in? (basically a reboot)

I updated the firmware on the 2nd of this month. Everything was fine. About a week later internet speed began to be slow. I rebooted the modem and the speed was okay for awhile, then slow again. I'm wondering if it's the airport express. It didn't tell me to reboot at the end of the installation.

Can't connect to Airport after firmware update

Ever since I updated the firmware on my Airport I can't connect to it any more. I'm pretty sure I installed everything properly and reset the Airport several times but still no luck in connecting to it. Any suggestions?

DomPoggi wrote:The Airport Utility said firmware on each Airport Express needs to be updated, so I did it.
Dom
Firmware updates on the Express sometimes results in scrumbled settings.
Check that WiFi is disabled on your MacBook.
Then connect (preferabely with a LAN-Cable) the MacBook to the Express.
Open Airport Utility on the Mac and switch to the Express.
Use the wizzard to set up the Express from scratch or use manual setting zu check the settings.
Lupunus

Macbook Pro has short battery life and runs hotter after firmware update

I installed the macbook pro EFI firmware update yesterday and now my MBP runs hotter and the fan starts running earlier than it has ever done before. Also, my battery lasts 51 minutes from a full charge whereas, before the update, it lasted 2 hours (using the same programs and display settings).
Has anybody else seen this problem?
Please tell me I'm not alone with seeing this. I am hoping that there is a solution and it's better than 'buy a new battery'. The fact that my box now runs hotter with the fan on more constantly would not be solved by a new battery I think.

Also had the problem of MBP running much hotter after most recent Firmware update.
My fans have been running at 6k RPM constantly, and processor Temps have been running at 70-88°.
Following the advice in this topic, I checked the Activity Monitor, which told me both my account and my son's account (which was running but had no actual applications running) had separate Airport processes going nuts – each at approx 80-95%!
Switching off airport and logging out of my son's account almost immediately started to cool the processors, and the fans began to slow down. Switching Airport back on doesn't seem to heat things up again, but if I start to crunch numbers, it all happens over again...
So who knows why the firmware update is making these processes freak out.... weird.

Windows 7 conflict with airport express 2nd generation

My airport express (2nd generation) is losing it's wifi connection with my router after being connected for an hour or so. It was worse (happened faster) until I made some setting changes. Here is the current config and purpose of what I am trying to accomplish...
Goal - Connect my son's new gamer computer that is running windows 7 professional to the internet
Config -
1. Airport is set up to connect to an existing wireless network that uses WPA/WPA2 Personal security
2. Ethernet cord is plugged into the ethernet slot in the back of the airport and runs to the ethernet slot on the computer.
Once the connection is lost, all you have to do is unplug and re plug in the airport and the light goes green and all is good for a little bit.
Yes, I have unplugged, disconnected and reconnected the router, too after making changes.
Any help would be greatly appreciated.

iTunes: Troubleshooting AirPlay and AirPlay Mirroring
About AirPlay Mirroring in OS X
For AirPlay Display (video) to work, check if the checkbox at System Preferences -> Displays.
For AirPlay (sound) like iTunes, check if the device shows up...
If you have Firewall turned on the Mac, check if Bonjour ports are open.

Data recovery after firmware update

Hi guys,
does anyone know it it is possible to recover data after firmware update in N8? some data are preserved (videos) and some are lost (photos).
thx.

if you didn't backup them, there is no way to recover them
Greece Nokia X6 RM-559 v40.0.002

After an update my airport is not working. It won't turn on. Do I need to redownload a driver, and how?

After an update my airport is not working. It won't turn on no matter how many times I press the turn on Wi Fi button. Do I need to redownload a driver, and how?

Hello
Try this
plug a WIERED mouse , start up your imac , hold on mouse buttons for 30-40 second at least by chance cd could be ejected
HTH
Pierre

I have updated my apple tv 2nd generation to the latest software but it shows the itunes symbol with the usb. Anyone know why this might be? Thanks

I have updated my apple tv 2nd generation to the latest software but it shows the itunes symbol with the usb. Anyone know why this might be? Thanks

If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Source list, and then click Restore.

Can the WAN port be used as LAN when AirPort Express (2nd Generation) is setup to join a wireless network?

Can the WAN port be used as LAN when AirPort Express (2nd Generation) is setup to join a wireless network? (IE: 2 LAN ports)
I haven't been able to get a clear answer on this. I believe the 1st generation would act as WAN/LAN depending on setting, but what happens with the 2nd generation?
Thank you for your time.

If the Express joins a wireless network wirelessly, in other words its WAN port isn't connected to anything, the correct way to connect a wired client to it is by using its LAN port.
I don't know what would happen if you were to connect a wired client to its WAN port instead — it's just not supposed to be used for that purpose. It won't permanently break anything if you were to try it though. If you were, the worst that would occur is that your network would become unresponsive as packets continuously traverse its WAN port in a circular fashion, which might require that you power down your router to reset your whole network.
If you are already using your Express's LAN port and you need another, the way to provide more ports is to purchase an inexpensive ($10 or so) switch. Connect it to the LAN port and as many other pieces of equipment as the switch's available number of ports.
You're correct about the first generation with the single Ethernet port. It could be used in either capacity depending on its configuration.

Apple TV 1st generation cannot use AirTunes with Apple TV 2nd generation or Airport express 2nd generation

Is it normal that Apple TV 1st generation cannot use AirTunes with Apple TV 2nd generation or Airport express 2nd generation? I want to play music synced in my ATV 1st gen. to a nymber of speakers in the house. In the list of speakers I can see Apple TV itself and my two Airport Expresses 1st generation but not my Apple TV 2nd generation or my Airport express 2nd generation. For the ATV 2nd gen. I found a solution: when I enable the Airplay setting of XBMC which is installed on my ATV 2nd generation, then AirTunes in ATV 1st gen. sees the speaker "XBMS (Apple-TV)". Itunes can in my Macbook pro can use Airplay with all my speakers, i.e. ATV 1st gen., ATV 2nd gen., Airport Express 1st gen., Airport Express 2nd gen.

Last time I checked ATV1 could not use Airtunes to send audio to an AppleTV 2 or 3 - highly annoying as you think they would have kept backwards compatibiility for audio, but it seems Airplay is more than a superset of Airtunes.
AC

AirPort Express (2nd generation) not visible in AirPort Utility or iTunes (AirPlay)

Hi!
I'm using an AirPort Express (2nd generation) for my Wi-Fi. I've configured the AirPort Express with my iPhone 5, but when I try to find the AirPort Express on my Windows 8 computer, it doesn't show up in the AirPort Utility software and in iTunes, the AirPlay function is not available. The AirPlay function is working fine on my iPhone 5/5s. What can I do to get the AirPlay function working in iTunes on my computer?
I thank you in anticipation!
/ralledenseje

iTunes: Troubleshooting AirPlay and AirPlay Mirroring
About AirPlay Mirroring in OS X
For AirPlay Display (video) to work, check if the checkbox at System Preferences -> Displays.
For AirPlay (sound) like iTunes, check if the device shows up...
If you have Firewall turned on the Mac, check if Bonjour ports are open.

3014 error i can't restore ipad after firmware update attempt

3014 error i can't restore ipad after firmware update attempt

See this thread with the same question.
https://discussions.apple.com/thread/5045573?tstart=0

After firmware update to V2.0.03, the web UI dos not look right. (WRT160 V2)

Hi
After firmware update from V2.0.01 to V2.0.03, the web UI dos not look right.
I can't see menus, just version number and the basic setup page.
Router Linksys WRT160 v2.
Allan

Hi
Thanks for the reply.
I't works ok now.
Thanks again.
Allan

Why after firmware update to Airport Express 2nd generation on 12 Aug can I not wirelessly access access hard disks connected to airport

Similar Messages

Maybe you are looking for