Why am I getting "Associated object cannot be opened"?

I have created a task that utilizes method CRMSALESPROCESSEDIT of standard BOR object BUS2000115 on our CRM sandbox. As a test, I launched the Webclient UI from transaction BSP_WD_CMPWB by clicking on the Test pushbutton for component CRM_UI_FRAME. I can see my task in the CRM Task List. However, when I try to execute the task I receive the message, "Associated object cannot be opened; contact your system administrator".
According to the second edition of the text "Practical Workflow for SAP", I "can use every standard BOR object type that is enabled for dynamic navigation for your own workflow without further customizing and implementation effort". Accordingly, I checked in table BSP_DLC_OBJ_TYPE and found object BUS2000115. So why am I getting the error message?
I tried maintaining Object Specific Navigation for this method in the IMG but it did not make a difference. But I might not have maintained it properly.
When I execute this task in the Business Workplace of the SAPGui it takes me to the "Search for Business Transactions" screen.
I am on version 'SAP CRM ABAP 6.0', with SAP_ABA and SAP_BASIS = 700. SAP_AP = 700. PI_BASIS = 2006_1_700. ST-PI = 2008_1_700. BBPCRM = 600.
Thanks for your help.

Hi Lars,
I will do what I can to help but I am going from memory. Our sandbox has been rebuilt several times in the the last few years. Plus we only use our SAP CRM system for channel managment now.
I think that I instantiated an instance of the business object BUS2000115 in a previous step of the workflow with a custom task that utilized method 'GENERICINSTANTIATE' of object 'SYSTEM'. I bound that instance to a workflow container object (probably called BUS2000115).
In a subsequent step I think that I failed to explicitly bind BUS2000115 to &_WI_OBJECT_ID&. This was in the definition of the step. In other words, from the workflow builder (transaction PFTC_CHG) I clicked on the "Workflow Builder" pushbutton. Then I double clicked on the step where I wanted to change the sales transaction. I entered the appropriate task and step name for changing the sales transaction. Then I clicked on the Binding pushbutton just below the "Step Name". In the top table control on the popup I entered &BUS2000115& on the left and &_WI_OBJECT_ID& on the right.
Once I did that then the error message was resolved. Hope that helps.
Cheers,
Paul

Similar Messages

HT1918 why am i getting 'your purchase cannot be completed' when gifting apps. worked first 3 times then this.

why am i getting 'your purchase cannot be completed' when gifting apps. It worked for 3 purchases then stopped

Pete, you have found like many before you, that eventually software becomes out of date, where software developers at different points no longer support old versions of their product, which eventually fossilizes your computer. It is inevitable.
You have heard of dog years, well computer years are even shorter, which makes your seven year old laptop certainly middle aged. It is still useful, running the applications it always has, so keep it. But online its years will show.
With the internet, new software developments affect browsers, and plugins, with java, flash etc.
Software development is often in step with hardware innovation, and most Apple hardware is not very upgradable and Apple don't support things for very long.
This leaves you with a an old PowerBook that will still be good for the things it does, though it will have increasing limitations with some modern internet media sites.
Mozilla no longer support 10.4 Tiger but fortunately there is a group who have kept it alive with their version of Firefox,
http://www.floodgap.com/software/tenfourfox/
Check it out, it may be just what your need.

Why am i getting the message cannot get mail or that i am not connected to the internet what settings do i need to be on

why am i getting the message cannot get mail or that i am not connected to the internet what settings do i need to be on

WIFi needs to enabled and you need to be connected to a network. Alternatively, you need Cellular Data to be "on". (Settings>General>Network). But it propably is a problem with your router (at least, it often is with me), provided you are using your private router. Try schutting it off and turning it on again. This usually sorts problems like this out.

Why do I get the message "cannot get mail" when trying to connect to microsoft exchange server.

Why do I get the message "cannot get mail" when trying to connect to ms exchange server?

Hard to say. Has it ever worked? Maybe your account has mobile e-mail disabled. Maybe ActiveSync isn't set up properly on the server. maybe the correct ports are not open on the corporate firewall.
You will have to talk to your IT department.

Data Object cannot be opened / accessed error - help required

I am running a CR 2008 and have a report set against a SQL view linked via a ODBC link. The view however has been updated and now includes an extra field, which I need to add into my report.
When I use the Set Database Location to update the link I get an error message advising "Data Object cannot be opened/accessed". I click OK to this and then get a further error "Unknown Database Connector Error".
Also, when I go to refresh the report I get this error "The database table "..." cannot be found. Proceed to remove this table from the report?" - if I click no the report refreshes correctly anyway, so it must be able to connect.
I have also tried refreshing the fields in field explorer too, but the extra field doesnt appear.
Any help would be gratefully received.

I can connect to the view via a new blank report and the missing field appears. However when I go to verify database it says the database cannot be found. It asks me if I want to remove it from the report, I select No then it tells me the database is uptodate.
Via the set database location it gives me the error in the initial post.
I think I have a workaround in that if I add a new database table to the same sql view the extra field is in there - so I will manually have to go though the report and change each formula, running total, group, and record selection from the original to the new table, then remove the old table.
Frustrating but it does appear to work.

HT201068 why all videos from Chinese websites cannot be opened after the update??

why all videos from Chinese websites cannot be opened after the Remote Desktop Client Update 3.8.2 v1.1??

That's not a thing that can happen. Your problem with videos is unrelated to the Remote Desktop Client Update 3.8.2 v1.1.
There were several OS updates recently as well, which could have affected video playback though.
What application do you use to play the videos?
Are the videos streaming from the internet or are they downloaded first and then played?
what format are the videos? what file extension?

I'm getting a "Document Cannot Be Opened" message when trying to open a recent document - any ideas?

When I try to open a recent document in Pages, I get a "Document Cannot Be Opened" message.
Also, it just clocks when I try to create a new doc.

A search of this forum for the message turns up this thread. Does it help?
https://discussions.apple.com/message/15988208#15988208

HT5557 Why do I get a Message "Unable to Open Book" and how do I fix it?

Why do I get a Message "Unable to Open Book" and how do I fix it?

This issue can be caused by the presence of leftover files in the Firefox program folder (defaults\pref) like a file firefox.js that overrides the update URL with a wrong link.
Do a clean reinstall and be sure to remove the Firefox program folder to remove the file(s) that cause the problem.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
See:
* [/questions/826858]

HT1414 Why do I get a message "cannot connect to iTunes" when I try to update or buy apps?

I cannot update apps or buy apps. I get a message "cannot connect to iTunes". Why?

Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

Why can't get the object "out" in this way?

We use "PrintWriter out=response.getWriter()"to get a "out" object in Servlet and output text to webbrowser with it.But I think the PrintWriter is a class and Why can't I get the object "out" use this way:"PrintWriter out=new PrintWriter()"?I think the later is easier to understand.Anyone can help me?

I check the Servlet API.The PrintWriter has a constructor with a abstract object Writer as it's parameter.I couldn't create the Writer object so I can't create the out object.Why it's constructor is protected by java?

HT5622 Why am I getting a message "Cannot connect to iTunes store" on my new iPod? Thanks!

Hello,
I just purchased an iPod Touch, and I get the message "Cannot connect to iTunes" on my device - any ideas about what I need to fix? Thanks!

Can't connect to the iTunes Store

RSEINB00 - Getting Error File cannot be Open - 1st Rec isn't IDOC contr rec

Hi,
I am trying to execute the Standard program for inbound IDoc Processing RSEINB00.
A flat file has been placed in the application server.
I have confirgured the port details for executing this program.
the program giving an exception that file cannot be opened.
When I went into the program and tried to find out the Error number it is Saying " File cannot be opened as the first record in the file is not an IDoc control record".
Can anybody suggest me what will be the structure or format of the IDoc Control record to execute this Program.
Can any body please provide me a sample file to execute this program.
please through some light for this requireme

Hi gaurav,
thanks for you reply.
Can you give an example
thanks & regards

Why am I getting "importing" every time I open a quicktime/flip4mac file?

ever since the last update to flip4mac all my quicktime files that I open, I am now getting a flip4mac window pane saying importing, then the file opens up. I don't understand why this is? all other versions of flip4mac worked fine.
thank you in advance.

Did you ever get this settled? I just found 3 charges on my bank statement from the last 3 days and I haven't purchased anything in over a month. Even the ITunes store shows my last purchase as being back in early May. But yet there are 3 separate charges on my statement dated June. I changed my password and deleted my card but I still wnt to know how I can get my money back and how this happened.

Why am I getting an "!" when I open up pictures in IPhoto

Not sure what is going on, but my hard drive was replaced at the Apple Store after a crash from their recent software update. They saved my data but now when I open up picutes in Iphoto I can only view thumbnails and the large size puts a big exclamation point on my screen like maybe a resolution problem or bad photos? Never seen this before, any suggestions?

The ! or ? turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Back Up and try rebuild the library: hold down the apple and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
If that fails, then...
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
2. Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Regards
TD

In iphoto-Why am I getting a question mark when opening a picture?

Starting a couple of days ago I have been having difficulty dragging pictures out of iphoto. It just won't let me. Now when I try to open a picture in iphoto it shows a big explanation point. I am so frustrated. The only thing I did recently was to download a trial of Adobe Elements. I don't know if there is a connection but I deleted it. I am still having the problem. Please help! Thanks, Dee

Dee:
I don't think the Elements install had anything to do with the problem. That ! is a result of iPhoto losing the path to the original file. Run the three fixes below in order as needed:
1 - launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select all options.
2 - rebuild the library using iPhoto Library Manager as follows:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 -Download iPhoto Library Manager and launch.
2 -Click on the Add Library button, navigate to your User/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File->Rebuild Library menu option
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: It may take some time to create the new library if you have a lot of photos.
3 - start over with a new library and import the Originals folder from your original library as follows:
Creating a new library while preserving the Events from the original library.
1. Move the existing library folder to the desktop.
2. Open the library package like this.
3. Launch iPhoto and, when asked, select the option to create a new library.
4. Drag the Originals folder from the iPhoto Library on the desktop into the open iPhoto window.
This will create a new library with the same Events as the original library if you have the Finder checkbox unchecked in the Events preference pane.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Why am I getting "Associated object cannot be opened"?

Similar Messages

Maybe you are looking for