Why am I returning back to paper bills....
I just discovered that Verizon is tacking on $1.00 fee for paying my bill online. Sorry Verizon. You made a bad decision with me. I would rather pay the cost of a stamp over the cost of the fee to pay my bills. Every little penny counts with me. I am returning back to paper bills. As a result, you will now be paying the cost of paper and mailing out my bills to me. Maybe, just maybe, if people would rise up against fees by going this route, you'll decide to omit fees for making payments online. It is utterly ridiculous.
I wish I knew what you were talking about?
I see no fee for paying my bill on line.
In fact a year ago when Verizon was caught trying to do it, they had an uprising of customers which resulted in them not doing the fee.
However your bank can charge a fee, most don't but they can.
Is this dollar fee listed on your monthly invoice?
Is this via auto pay? is this via you paying with a credit card or debit card at the payment portal? is this over the phone? (Over the phone may have a fee)
Or is it Bill Payer service from your bank to Verizon Wireless?
Many of these services from the bank can be or are incurring fees.
Good Luck
Similar Messages
-
I am planning to upgrade from Bt Broadband, to Bt Infinity however only paper free billing is available, i did some research and found that by calling 0800 800 150 I can ask for paper billing.
Can someone guarantee that after I upgrade to Infinity(+ new 18 month contract) with its paper free billing, i will be able to call that number and switch back to paper billing? Or will they say something like "Sorry when you signed the contract it was only for Paper free bills, you cannot switch to paper bills again."
Sorry if this is a silly question, but due to my circumstances Paper Bills are my ONLY option and I just want to make sure.
Thank you in advance!geo1986 wrote:
You can have paper bills, but they are being charged for now if you have broadband and will cost you £1.50 a month.
I used to get a discount for having only paper free billing (about £3.50pm iirc), then they did away with that discount.
So rather than me spending my money on printing out my bill, I then requested a paper bill (with my paper free bill) and currently have both.
Now they're going to charge for a computer to stick 2/3/4 pieces of paper in an automated envelope sealer and have it sent by royal mail - be interesting to find out the actual true cost for this process per customer per month. Can't see it being anywhere near the £1.50 they plan on charging, but I could be wrong......
-+-No longer a forum member-+- -
Why My iPhone 4s close most of my apps when i opened them immediately and return back to home screen ?
What is the problem and how can i fix it ?Download a free app and see if that helps, you can delete the app later if you do not want it.
-
Remove_column( ) of cl_wd_table not returning back the column reference
Am using the remove_column( ) of cl_wd_table to remove a particular table column & also get the reference of a the same for inserting at a different position. But the system doesn't return back any value. I tried doing a get_column( ) before doing the remove_column( ) but even that wasn't able to get the reference to that column. I debugged & observed that the system was internally reading an internal table ME->ch_COLUMNS to get the list of columns but this table was empty and so the READ was failing.
method GET_COLUMN.
CLEAR the_COLUMN.
IF index > 0.
READ TABLE ME->ch_COLUMNS INDEX index INTO the_COLUMN.
ELSE.
READ TABLE ME->CH_COLUMNS WITH KEY TABLE_LINE->ID = ID INTO
THE_COLUMN.
ENDIF.
endmethod.
I had bound the TABLE to a context node based on dictionary structure SCARR & 3 fields CARRNAME, CARRCODE & URL. Please advise as to why the column references aren't available.
UdayHi Suman,
Thanks for the reply.
In WDDOMODIFYVIEW I have put the below coding:
method WDDOMODIFYVIEW .
check first_time = abap_true.
wd_this->gr_table ?= view->get_element( id = 'TABLE' ).
endmethod.
I need to change the table column position when the user clicks on a pushbutton. The attribute context_element is an importing parameter of type if_wd_context_element and have declared gr_table in view attributes as of type CL_WD_TABLE. The coding is as below:
method ONACTIONMOVE_DOWN .
data: old_index type i,
new_index type i,
lr_column type ref to cl_wd_table_column.
old_index = context_element->get_index( ).
check old_index < 3.
lr_column = wd_this->gr_table->get_column( index = old_index ).
wd_this->gr_table->remove_column( index = old_index ).
new_index = old_index + 1.
wd_this->gr_table->add_column( the_column = lr_column
index = new_index ).
endmethod.
By the way I have noticed something else while debugging inside the standard code for get_column( ). The ME->CH_COLUMNS is empty but there is another attribute ME->CH_GROUPED_COLUMNS which has the type ref info for the 3 columns which am displaying in the TABLE. I haven't set anything specific properties for the table either. Any inputs from your side would be very useful.
Edited by: Uday on Aug 29, 2008 11:09 AM -
New Customer From DD to Paper bill?
Hi,
Within the hour iv just signed up to BT. However I initially wanted to pay by DD, so i set that up. However, after confirming i realised Iv just set up a new Bank account, and still waiting for account details. However i think by the time my BT bill is ready to be taken, i will have my new account details and my wages will be paid into that. So please could someone tell me how to reset billing back up so Im receiving paper bills for the time being? I just don't want to incur any Bt/bank charges.
Many thanks
CatHi Cath27,
Thanks for posting. I can take a look at this for you. Drop me an email with your account details and a link to this post for reference. You'll find my address in my profile.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-) -
Dear Community,
Please can someone assist me on what to do on the following;
After update of my iphone 3GS ios. I found out that my iphone has returned back to factory setting and it shows No Service on the top left corner of my iphone screen. It equally shows on the screen that I have to set up the iphone before using it again. I followed the on screen display then get connected to a WiFi, but the response I was getting is that the Set up Server cannot be contacted please try again latter. I chose the option of using itune through my Laptop. The response I was getting here is that my iphone cannot be connected the itune store because my iphone was not found.
I am regretting why I updated the ios. Please, can someone advise me on what to do please.
I am ernestly waiting for your kind response.
Regards
DanielHi iPheariPhoPad,
Welcome to Apple Support Communities.
It sounds like there’s an issue with Settings, the Notes app entry isn’t showing up as expected. Take a look at the article linked below and try restarting your iPhone 3GS.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
If that doesn’t do it, try restoring your iPhone as shown in this article:
Use iTunes to restore your iOS device to factory settings - Apple Support
Take care,
-Jason -
Can I still download my previous purchase from my previous country (returning back) without repurchasing it? I'm curious since my purchase of iPhoto has disappeared on my mac, will I be able to get it again without repurchasing?
How are you trying to redownload them e.g. you are using the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes :
If you are in a country where music can be redownloaded then that should let you redownload them from the store.
If they redownload in the same shortened state then you can contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
Firstly no I haven't changed anything in regards Telstra products last was new mobile in May 2012.Can someone explain why since Dec.2013 Telstra now charges me the $2 fee.Tried 3 times by phone last time they said they would email copy letter supposedly sent in Sept 2013 informing of charge.You guessed it no email!!Went to Telstra shop they tried couldn't find letter they called someone else who did? find it and would email it to me.You guessed it again no email!!!!!!If Telstra twice can't send an email about charge how could I trust them to send me an email bill and actually get it !!!!!!
Hey steamer52,
Firstly, welcome to CrowdSupport. Please stick around and offer any expertise you have in the range of topics we have here, in our Community.
steamer52, the Paper Bill and/or Non-Electronic Payment Fee of $2 has been introduced since 29th of March 2011 and applies to all plans below:
This small fee ($2 including GST per bill cycle) are charged to customers on certain plans who don’t choose paperless bills and use electronic payment methods.
Customers on those plans who do choose paperless bills and pay electronically won’t be charged the fee. You mentioned you've taken a new mobile service on May 2012 which means your mobile plan would be in one of the above plans where the fee applies. You would have the My Offer Summary sent out when you received your handset or when you've signed up for the mobile service. You can find copies of these summaries here. Thanks steamer 52. -
Last year, without my asking for it, Verizon stopped sending me paper bills in the mail and starting sending them by email. I called and they started sending paper bills again. Now I have not received a bill from Verizon since January but (unlike before) I am also not getting an email indicating the the bill is ready online. Getting the paper bill in the mail is my trigger to pay it so last month's bill was missed and I was unaware until I get a phone call the other day threatening to cut off my phone service. Of course, I sent in a check for the full amount due immediately minus the $5 late fee which I do not feel I owe them.
Why is this such a problem with Verizon? I have been a loyal customer for 15 years now and paid very single bill on time (with the exception of the last one) but I am seriously considering changing carriers if they cannot get their act together on billing.I could not fathom why you are not receiving any invoices now.
I know that paperless invoices have been around a long time, but the account holder has to request it.
A few years ago those who had paper also had call details etc. but they sent out a notice that it was not going to be olffered to new customers. I still get call details with paper billing even though I many times look at my bill on line which has all details listed the same way as my paper bill.
you can print them out etc. but I like filing away the hard copies and yes I pay my bill on line.
Are you sure there is no invoices on line? I receive an email each month telling me my bill is ready to view and pay but I still get paper billing. maybe your email was omitted from their system, maybe its spam block, look into that possibility.
Go into a verizon wireless company store and have them enter your information for paper billing they will take care of it for you. -
I am trying to stop the paper bill from coming to my house by signing up for paperless billing, but when I click on 'paperless billing' it tries to enroll me in AutoPay. Why can't I just stop my paper bill?
Screenshot:Ah, I guess that was it.
Just too easy for me to realize, I guess. Thanks! -
Already made 4 calls to ask why there is extra charge on my bill, and all agents are useless to help
I have cancelled my TV service and only kept the phone and internet service with Verizon since March 2013. I had returned the set top box, they have charged me 263 $ for that even after I returned back their equipment in a UPS box they had sent.
How can they not receive a TV box and remote in the UPS box they sent, with all addresses there to go to a Verizon offce and charging me. In fact, when contacting about the returned box, someone once confirmed that they received their equipment and will take care of the billing charges. Nothing seems happening after 2 months. When I again called today, the lady said they have never received the equipment and need tracking number...... it is so dissapointing to hear after 4th call in same matter.
is there any help how this VERIZON's bad treatment to customer can be addressed?We verified that you will be receiving a credit for this issue. Thank you for giving us a chance to rectify the problem for you!
-Rachel -
Help Needed: Returning Back to Windows 8 after downgrading to Windows 7
Hi guys, im just new here.
I have a MSI GE40 gaming laptop which I bought 2 months back.
Within those 2 months of usage, I always encounter my laptop to be very slow in shutting down. It always take, maybe up to 10 minutes to fully shut down. The screen goes black but the power button stays on orange color, & as I said, it takes a long time for the power button to be completely unlit. But for start up, its blazing fast.
Thinking that windows 8 itself is the culprit of super slow shutting down, I searched the net on how to downgrade to windows 7.
Of course I did make a back up first on a 16gb usb flash drive using the pre-installed recovery software from MSI which was completed successfully.
Then I made some tweaks on the bios (ie select legacy & disable secure boot) & boot using windows 7 installation DVD, deleted all partitions (since the notebook comes with GPT partition) to be able to install windows 7. I installed all the drivers which I downloaded from MSI website specific to my notebook.
But the problem is not solved, it is still very slow in shutting down, & now even boot up becomes very slow too.
So I downloaded & execute the firmware & bios for windows 7 from msi website (again, specific to my model). But still the same, the notebook is still very slow both in shutting down & start up.
So I decided to go back again to windows 8, I tried to boot from the flash drive (I adjusted from the bios & make the flash drive to be the first priority) but it did not boot from it. I tried F11 on start up & selected to boot from usb flash drive but again, to no avail.
So the last one I did was downloaded windows 8, make a bootable flash drive out of it, boot from it and luckily, I succeed - I have now again a windows 8 msi ge40 laptop.
But I wanted my laptop to be reinstated to factory setting, i.e, all preinstalled softwares are there, the bios is default for windows 8. So I tried to update the bios to the one for windows 8 again (since I downgraded the bios to the one for windows 7 when I downgraded the OS to windows 7). But I could not update the bios, the laptop is not booting from usb flash drive containing the bios.
I tried also to recover using F3 on start up but the system does not recognize the flash drive (with system back up). I tried also on PC settings but to no avail.
Now guys, I need your help.
How can I return back my laptop to default factory settings?
Thank you.
(sorry for my not so good English)Hello:
I think it's not only about the OS version, you need to return this back to your shop to repair with the slow shot down issue, because the OS should be shot down in 30 seconds, far from your GE40 times. -
How to call an alv report from another program and return back
Hello ,
I am calling one abap program (Prgm B) from another program (Prgrm A).
Here, Prgm B is an ALV report. I have fetch some data from Prgem B that gets stored in an internal table.
Now, I am using below code in Prgrm A,
SUBMIT Prgrm B VIA SELECTION-SCREEN
WITH SELECTION-TABLE rspar
EXPORTING LIST TO MEMORY
AND RETURN.
When Prgrm A executed, it lead me to selection screen of Prgrm B and when I click F8, it shows me the report output, In short, it doesnt return back to Prgrm A. It ends up showing me the alv report if Prgrm B even afetr using RETURN statement.
I want to get back to Prgrm A by fetching some data from Prgrm B.
Please let me know, if i am missing something.
Regards,
SeemaHi Seema,
Refer below code.
DATA: v_matnr LIKE mara-matnr.
DATA: t_listobject TYPE abaplist OCCURS 0 WITH HEADER LINE.
DATA: t_mara TYPE mara OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF t_ascilist OCCURS 0,
line(200).
DATA: END OF t_ascilist.
data var(3) type c.
SELECT-OPTIONS: s_matnr FOR v_matnr.
var = ' 3'.
START-OF-SELECTION.
SUBMIT ztestaks1 WITH s_matnr IN s_matnr EXPORTING LIST TO MEMORY
AND RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = t_listobject
EXCEPTIONS
not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
CALL FUNCTION 'LIST_TO_ASCI'
* EXPORTING
* LIST_INDEX = -1
* WITH_LINE_BREAK = ' '
TABLES
listasci = t_ascilist
listobject = t_listobject
EXCEPTIONS
empty_list = 1
list_index_invalid = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
WRITE:/ 'Below are the lines from the submitted program.'.
LOOP AT t_ascilist.
WRITE:/ t_ascilist-line.
ENDLOOP.
SKIP 2.
ENDIF.
ENDIF.
IMPORT t_mara FROM MEMORY ID 'T_MARA'.
WRITE:/
'Here is the output from the table exported from the submitted program.'
LOOP AT t_mara.
WRITE:/ t_mara-matnr.
ENDLOOP.
Submitted program
REPORT ZTESTAKS1.
DATA: v_matnr LIKE mara-matnr,
v_maktx LIKE makt-maktx.
DATA: t_mara TYPE mara OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF t_makt OCCURS 0,
matnr LIKE makt-matnr.
DATA: END OF t_makt.
SELECT-OPTIONS: s_matnr FOR v_matnr,
s_maktx FOR v_maktx.
START-OF-SELECTION.
SELECT matnr INTO TABLE t_makt
FROM makt
WHERE matnr IN s_matnr
AND maktx IN s_maktx.
if not t_makt[] is initial.
SELECT * FROM mara
INTO TABLE t_mara FOR ALL ENTRIES IN t_makt
WHERE matnr = t_makt-matnr.
endif.
EXPORT t_mara TO MEMORY ID 'T_MARA'.
WRITE:/ 'This list is from the submitted program'.
SKIP 1.
LOOP AT t_mara.
WRITE:/ t_mara-mtart.
ENDLOOP.
Hopes this helps you.
Thanks,
Ashok. -
Why doesn't the "back" button work all the time in Safari?
Why doesn't the "back" button work all the time in Safari?
thanks for the reply. You prompted me to check and I realised it wasn't installed on my test laptop and opening in Microsoft Reader. I've installed it now and it works.
My next challenge is to prevent the mailto: command opening Microsoft Mail instead of Outlook, but I guess every user will have a different default.
Thank you -
I need to have a paper bill each month even though sometimes I pay my bill on line. I just went online and see a bill is due in a couple of days. I would not have know had I not signed in.
Your bill closing date and bill due date are the same every month. Log into your MyVerizon account to see if there is a setting for paper bills. Or you could call CS to request it.
Maybe you are looking for
-
URGENT: SBS 2011 Exchange log files filling up drive in minutes!
I need some help with ideas as to why Exchange is generating hundreds of log files every minute. The server had 0MB free on the C: drive, and come to find out, there were over 119,000 log files in the Exchange server folder (dated within the last 7 d
-
Cant find signal, need external antena?
Hello, I just got the airport/bluetooth kit installed into my late 2005 G5 dual processor and am trying to connect to a public hotspot down the street. The G5 isn't seeing any networks when I scan, but my roomates PC finds 6-8 various networks of var
-
Recently my screen saver has failed to launch automatically and the hot corner does not work either. I can successfully launch screen saver from it's page in sytem preferences. I'm using OSX 10.6.8 on a 13" MacBook. Any help? Thanks.
-
Adm drive is not functioning or not installed
Product Name and Number - HP Pavilion g6-2008tx Notebook PC Operating System Installed - Windows 7 Error Message - No ADM graphic drive is installed, or the ADM drive is not functioning properly, Please install the ADM drive appropriate for your ADM
-
HT201272 How do I re-download a tv show that didn't download properly the first time?
i purchased a copy of Downton Abbey Season 3 and the first episode did not download properly. It's showing already downloaded and isn't letting me re-download. How do I get this episode into my library?