Why can't update the firmware for my dr8-a from 120D to 130D?

Good evening MSI!
I tried everything! I tried under dos and under windows white live update. Nothing! In dos (version 6.22 bootdisk) mode display me "Bios Update Fail~~" and Win mode (WINDOWS XP) is freeze. Working the burner after update is failed. Please make working firmware update!!!
Thank you MSI!

May be wait for the next version of the update then.

Similar Messages

  • How can I update the firmware all at once

    I'm a tech support in a school, approximately our school has over 500 laptops, how can I update the firmware on all laptops at once?

    Apple Configurator is the software you want - and it's free from Apple. However, I'm dubious that firmware can be updated all at once.
    http://help.apple.com/configurator/mac/1.4.1/

  • Update the firmware on my airport express from 7.4.2 to 7.5.2

    When I press update the firmware on my airport express from 7.4.2 to 7.5.2 using the airport tool says:
    This device and its network service is temporarily unavailable. will you continue?
    When I press deliberately and pressed into the code goes started to download the update, but come quickly with this message:
    Airport Utility could not find the AirPort wireless device after restarting. You may need to select your network manage network connections and try again.
    But my airport lights up green as if it works and I may well be on the net and listen wireless music.
    How do I get updated firmware?

    Chances are, the update was downloaded and installed successfully.
    Try powering down your entire network....every device.....order is not important
    Wait a few minutes
    Start the modem first and let it run for 2-3 minutes by itself
    Start the next device connected to the modem the same way
    Continue starting devices one at a time about a minute apart until everything is powered back up
    What happens?

  • Can't update the firmware of my GT70 2OC (Problems with your firmware)

    I can't update the last firmware of GT70 2OC, the guide says run file ecwin.bat as administrator and it will automatically choose which folder of (352x & 353x) is the right one for my notebook and it will run automatically.. well it doesn't do that and it show me this
    And this is what inside the firmware.zip
    So, which folder is the right one for the GT70 2OC ?  (352x or 353x) ?
    Because I can just run the winflash.exe from anyone of them.
    BTW Norton removed "Autoflash.exe" it detected it as a medium risk and bad reputation -_-

    Quote from: Omar Os on 28-January-15, 17:41:27
    The problem is I think I installed the wrong one last time :\ because they made the same mistake and the same error appeared -_- so I may have installed the wrong one from the 352x or 353x .. and the touch buttons didn't work since then I think.. maybe that's why !
    if you are sure that you reflashed to the wrong one,
    then reflash to correct one, there are 2 choices only
    ie: if your current is .7xx and you have issues some keys not working or other not working stuffs, then reflash to .5xx
    and opposite
    Quote from: Omar Os on 28-January-15, 18:11:49
    BTW Norton removed "Autoflash.exe" it detected it as a medium risk and bad reputation -_-
    turn off/disable Norton before flashing

  • Can't update the info for my music (e.g., artist names, ratings) on iTunes anymore.

    I used to be able to update the info for my music (e.g., artist names, ratings) via iTunes, but it doesn't work anymore. In the past I'd change it in the music tab underneath my phone's tab. Using one band as an example, it's all spelled exactly the same on my computer in both music tabs (under my phone and on my computer), but it has various spellings still on my phone. Also, when I rate a song on my phone, it no longer shows when I plug into iTunes. I rate songs 1 star if I want to delete them later but it just doesn't work anymore. How can I fix this? Thanks in advance.

    I agree that it should work. But for some reason it does not.
    Suggestions here -> http://www.apple.com/feedback/
    However, I don't understand why you want to keep songs with incorrect info and then correct them on the phone every time you add them to the phone. Most people would want to do it one time.

  • TS1398 I can't update the password for my WiFi on my iPad

    Our WiFi passwords are updated quarterly at work, but I can't update the password on my iPad. On my phone I can "forget this network" and then enter the new password, but this option ins't avaiable for my iPad. I've tried resetting all network settings 3 times and that isn't working either. Needless to say I'm very frustrated. It should be easy and seamless to update wifi passwords. Please help!

    See this Apple Support Document.
    http://support.apple.com/kb/HT3728?viewlocale=en_US
    Under the heading of Under what circumstances will I need to do a reset, pay close attention to the information discussed under a Soft Reset.

  • Update the firmware for RTX 4088

    I got my phone today and tried to update the latest firmware. I had some calls succesfully already and there is no problem with calling, but I still cannot update the firmware and it showed me that "No connection to update server". Is there any setthing which I would need to activate before doing this? version is 0138
    Is there anyone who had this experience and would share?
    Thanks,

    I'm having exactly the same problem, though my firmware is 0141 (not sure if this is the latest). When I select the 'Firmware update' option, I'm immediately given that "No connection to update server" message (not sure if it even tries to connect to it, as this all happens immediately), and no further options (Latest Firmware / Current Firmware / All Firmware vers.") are presented. I tried to reset the base station several times, to no avail.

  • I can't update the firmware, stay on the message waiting for ipod

    Hi, well my problem is that, i try en 3 different computers, and always the same error.  Error(9), but i thin this problem could be hardware, bout i don't know the way to check this, if someone can help me.  Thanks.

    Error 9: This error occurs when the device unexpectedly drops off the USB bus and communication stops. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB isolation troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    Above from:
    http://support.apple.com/kb/TS3694
    This may also help
    iTunes for Windows: Gathering and using iTunes Diagnostics

  • I can't update the firmware on my CP1525nw

    1. Product Name and Number
         • HP CP-1525nw
     2. Operating System installed (if applicable)
         • OSX 10.7.2, printer connected via ethernet cable to my Airport Extreme base station.
     3. Error message (if any)
    I downloaded the Firmware Updater, unpackaged the .dmg file, ran the program, accept web search for firmware versions, and it crashes after agreeing with the EULA; just before showing the table with the current and available firmware versions.  Well, it presents the empty table and then it crashes. 
    Do I need to run this program while connected via USB cable or something?  I can't find any instructions on how to perform the procedure.
    Thanks.

    I have two CP1525nw's on two different networks.
    The firmware updater that HP sent out on 1/5/12 crashes on Macs on both networks while looking for devices.
    When I try to use the support link in the email I get a message saying "unable to find any results that match the information you entered".
    Free firmware upgrade is required to keep your ePrint and Print Apps service working. Please go to: www.hp.com/go/eprint to download the newest firmware and continue using your ePrint solution. If you do not complete the upgrade, your ePrint and Print Apps may not work after Hewlett-Packard has finished a service upgrade on 1/15/2012. All other product features will continue to work as before. If you have questions, please contact HP Support at http://www.hp.com/support/contacthp.

  • How can i update the firmware on HH5

    I imagine the answer is probably that you cannot do it manually .
    I have only just started to reuse my Home hub 5 last week after initail problems wheni first got it .
    It is running the following firmware from 26/03/14
    How can will it be before the firmware updates automatically .. if ever ..... or can i download tne latest version from somewhere and install it  ?
    BT Home Hub 5 (Type A) | Software version 4.7.5.1.83.8.173.1.6 | Last updated 26/03/1

    there have been a few other posts previously where the hub appeared to take ages before it updated.  you could try a factory reset and then leave conencted and see if that triggers the automatic update
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Help Help Me... Why can't update Mini Firmware ?

    Hi all,
    Pls give me a help, I have one firmware upgrade problem.
    I have already update to 10.4.6 version.
    And download boot camp utility and MacMiniFirmwareUpdater.dmg. http://www.apple.com/support/downloads/macminiearly2006firmwareupdate10.html
    Execute upgrade and MiniFirmwareUpdater shows "No update is necessary for the computer" but when I open "boot camp assistant", it says that need a firmware update before run.
    Where I need to pay attentation?
    My CPU is Intel dual core.
    Thank you for your support!

    My firmware version is of no interest to you. I have a G4 Mini.
    Basically, you should run (or execute if you prefer) MacMiniFirmwareUpdater.pkg, and once the updater has finished doing whatever it has to do, you should see, within the updater itself, a Shut Down button. If the firmware updater looks like any standalone update then it should be your only option anyway. Since I don't have an Intel Mini though, I don't know if it looks the same.
    As for holding the power button, you should probably wait until you actually see the status bar. Whether it's a matter of seconds or of minutes is a mystery to me as I've nver updated my Mac's (or any Mac's) firmware.
    You will probably find many people with Macintels and willing to install Boot Camp in the Boot Camp Public Beta forum. They'll probably be able to help you with the Firmware Update too.

  • I Can't update the firmware

    I'm trying to upgrade the version of the IOS, but after Itunes download the firmware, appears an error 3194.

    Check out this support article from Apple.
    http://support.apple.com/kb/TS3694#error3194

  • N80 Can't update the firmware

    Hi,
    When I try to update my N80, NSU show 4.0632.0.38 as the latest update si it says that my phone is already up to date.
    I got my phone in same time with two friends and they can update theirs (we are in france and we all have Orange operator).
    How to update my phone please ?
    Thank you in advance for your help.

    Do you have the IE edition? I have the same thing and NSU says that I already have the latest one.

  • Can I update the drivers for my MBP ?

    Hi,
    I' m having big troubles connecting to the internet at my work. I can log on to the net and load some pages - but not google and many others. This is really strange.
    I'm thinking/hoping that maybe i can update my drivers. Can this be done on a MBP ? Where can I see what driver I'm using ?
    Sincerely
    Christian

    Hmmmm....where to begin? First off, 'drivers' are controllers for external devices (or internal ones, technically) but would have nothing to do with internet access +to selected web pages+, and would only affect general internet access if you are using some non-standard way of accessing the network (e.g. an ExpressCard WAN or a USB wireless device).
    It smells more like a DNS or proxy server issue. Is there an IT department that can help? You caould also try an alternate browser like FireFox (but any browser should load google!).
    Hope this helps...

  • I updated the firmware for the fan on my macbook, but now....

    the fan is really loud. It was more quiet before i updated it, is there anyway to uninstall the update??
    thanks

    My CPU usuage is very low, as the fan kicks in hard after 30 to 40 seconds after boot up.
    This WAS a problem free macbook until I installed firmware update 1.1, wish I hadn't bothered
    Done all the PRAM resets, Disk utilites etc... nothing works.
    Apple support told me to re install OSX and do a selective Software update excluding the SMC update to 1.1. Told me to wait for update 1.2

Maybe you are looking for