Why conversion Rate gets changed for a reversal journal?

Hello,
After the Reversal Program run, the reversal journals has created with wrong Currency Conversion Rates instead of same conversion rate as that of Entered journal.
We have around 4 JVs each in Dec-11/Jan-12.
Eg:
In Dec-2011 4 JVs were created and the conversion rate was .99345 (USD-AUD)
and in Jan-2012 4 reversal JVs were created and the conversion rate was 1.01565
The set up for the Reversal Journals for Category "Accruals" is set as "No Default"
The reversal journals are suppose to be get created with the same conversion rate as that of original JV but it has picked up the conversion rate of the period when we did the reverse i.e of Jan-12.
let me know what else could be the issues and any resolutions for this?
Regards,

sorry,
some info: as per the real example:
for Reversal JV:Conversion Rate Jan:1.01565
CURR     REV_PERIOD     REV_JV_CRE_DATE     REV_JV_POST_DATE     ENT_DR (Reversed)      ENT_CR (Reversed)      ACC_DR(Reversed)      ACC_CR(Reversed)
CAD     12-Jan     5-Jan-12     7-Jan-12     1,497.25      1,497.25      1,465.95      1,465.95
AUD     12-Jan     5-Jan-12     7-Jan-12     1,998,015.59      1,998,015.59      2,029,284.53      2,029,284.53
GBP     12-Jan     5-Jan-12     7-Jan-12     5,046,433.23      5,046,433.23      7,907,003.90      7,907,003.90
EUR     12-Jan     5-Jan-12     7-Jan-12     10,294,230.25      10,294,230.25      13,450,441.25      13,450,441.25
For Original JV:ConversionRate Dec: 0.99345
CURR     JV_PERIOD     JV_CRE_DATE     JV_POST_DATE     ENT_DR(Original)      ENT_CR(Original)      ACC_DR(Original)      ACC_CR(Original)
CAD     11-Dec     3-Jan-12     3-Jan-12     1,497.25      1,497.25      1,451.88      1,451.88
AUD     11-Dec     3-Jan-12     3-Jan-12     1,998,015.59      1,998,015.59      1,984,928.59      1,984,928.59
GBP     11-Dec     3-Jan-12     3-Jan-12     5,046,433.23      5,046,433.23      7,844,932.77      7,844,932.77
EUR     11-Dec     3-Jan-12     3-Jan-12     10,294,230.25      10,294,230.25      13,744,341.52      13,744,341.52
so the variance is:
VARIANCE_DR      VARIANCE_CR
14.07      14.07
44,355.94      44,355.94
62,071.13      62,071.13
(293,900.27)     (293,900.27)
Edited by: 912037 on Feb 3, 2012 1:10 AM

Similar Messages

In FBl5n (after accounting process) exchange rate gets change

Dear Experts ,
I am facing
issue regarding in FBl5n (after accounting process) exchange rate
gets change.
Due to this, there is a difference in billing
amount.
According to the KBA 1481328, If there is a manual entry in
the sales order field VBKD-KURRF (Goto -> Header -> Accounting),
then it is copied into VBRK-KURRF. Otherwise VBRK-KURRF is determined during
invoice creation from the currency tables (Transactions: OB08, OB07 and
OB22) according to the billing date.
It is supposed that manual entry has higher priority.
Why system is
fetching the exchange rate from OB08 when manual entry has first priority?
Kindly Advice.
Regards,
Shachi

First of all, you got the KBA number wrong. It is a KBA 1481238 - How are different exchange rates (Price, FI postings and Conditions) determined in billing documents, not SAP Note 1481328.
Now, if you manually change the exchange rate in sales order(SO - Goto - Header - Accounting), as per standard this will not be able impact your pricing. As the system always uses the local currency to convert currencies.
For further detail refer SAP Note 123298 - Euro: Conversion of document currency in sales&distribution. That can be helpful in understanding the standard behaviour and solution to the same.
In addition to that from Sales Order to Billing, we have copying control field for "Price Exchange Rate Type" which can impact the result for exchange rate determination. Where the option available are:
A - Copy from sales order
B - Price exchange rate = Accounting rate
C - Exchange rate determination according to billing date
D - Exchange rate determination according to pricing date
E - Exchange rate determination according to current date
F - Exch.rate determination accord.to date of services rendered
Thanks, JP

Cost and/or Conversion Rates are missing for some planning resources

Hi,
In Workplan of projects, we are facing a issue "Cost and/or Conversion Rates are missing for some planning resources". even though the schedules for the project WP is defined.
Any inputs on this is highly apprciated. Thanks !!!
Regards,
Pallavi

Did you check the Cost for all the Planned Workplan Budget Lines. Generally, this type of error comes when the Quantity is defined but the Cost is missing for any Line. Find that Planned Workplan Budget Lines and enter the Cost for them and save it.
I hope it may help you.
Regards,
Khan.

Why did I get charged for the gift card from the student deal with macbook pro?

Why did I get charged for the $100 gift card student deal that came with the macbook pro? I was told that it would be taken credited off my credit card however; that has not happened. Am I missing something? Have other people been charged for this as well?

The same thing happened to me but it made sense.
I ordered a MBPR on Jun 12 for $2879 which qualified for the free student gift card. The gift card was available to ship (delivers June 20 - June 21) but the MBPR wasn't available until a month later (deliverys July 3 - July 10). Instead of holding the gift card until the MBPR was ready, Apple charged me $100 for the card then shipped it to me.
About a month later when the MBPR was ready, Apple charged me $2779 then shipped it. In the end, I was charged the correct amount $2779 + $100 = $2879.
Why did Apple do this? I suspect that some people have cheated Apple by ordering a Mac to get the promotional gift card then canceled their order after the gift card was spent. Apple is trying to protect itself.
BTW, if you return the mac then you're expected to return the gift card. If you've spent any amount of the card then Apple will deduct this from your refund.

HT201272 Why did I get charged for dowloading music to my iPhone that I already purchased?

Why did I get charged for dowloading music to my iPhone that I already purchased on my PC?

Thanks for the response!
Since I only have one AppleID and since I'm sitting at the computer showing the previously purchased songs, I'm guessing your third response is the accurate. I logged onto iTunes Store and "reported a problem" with the two songs and am awating their reply.
I'm guessing that it's something I did (or didn't do) when I downloaded the songs from iTunes Store to my iPhone. I forgot to synch these two songs from my PC to my iPhone before travelling. However, I noticed that the two songs were listed on my iPhone iTunes application in a playlist called "recently purchased." I clicked on the two songs and they were downloaded to my iPhone (which I would expect); I then received an email receipt for the charges for the songs (which I didn't expect.)
Terry

Why do I get prompted for permission to delete files or change file names?

One of several users (my wife) on our iMac has recently started getting prompted for the administrator password to delete, rename or perfrom other operations on files in her home directory. I suspect a corrupt set of user configurations files. How can I fix this?

Remove the ACLs from files/folders in her home folder. Log in to an admin account and enter the following in Terminal:
sudo chmod -R -N ~wife
(where "wife" is your wife's account's short name)

Font and font color are getting changed for SAP R/3 report in portal

Hai,
We are using ITS 6.2 patch 26 and EP 6.0.
When i run a SAP R/3 4.6C report in ITS 6.2, the report content are shown in Courier New font with blue color.
When i run the same report from portal, the report content are shown in Arial font with blackish blue color.
Can anyone tell why in portal the font attributes are getting changed and how to have the same font attributes in portal also.
Regards,
H.K.Hayath Basha.

Hi
Please go to System Administration -> Portal Display -> Themes.
You can change the font type , color and size from here and have to properly assign it to the Desktop for the users for which these font should be displayed .
Please check the following links :
http://help.sap.com/saphelp_nw04/helpdata/en/26/3df46c0584cd4eb31e91aa7bcf1893/frameset.htm
Edited by: purav mehta on Dec 16, 2007 6:01 PM

Why 2BDOCS are getting created for sending Sold to Party to ECC.

Hi,
I have a question, when BP (Sold to) gets create in CRM & replicates in successfully ECC.When I see Tran SMW01, I found two bdocs are getting created for same Sold to. Why this is happening!! How I can remove the another Bdoc type (VEND_MAIN).
Please suggest.

Hello Developer,
Yes, I've checked the combinations of webshop(In Shopadmin) and Product Catalog.(Sales Area)
All of them are compatible.
Hey DJ,
When you say: u201Cthe first entry maintained in the USAPPLREF tableu201Du2026.in our case, there are 2 entries for my user (PPELA3). The first one is for object type BUS1006001 and object key nr° 23263-my contact person, linked to sold-to nr° 1000003), which is the employee that I 've created in the ISAUSERADMIN.
The second entry is with object type KNA1 with object key nr° 1000003 (which is the sold-to).
Those are the only entries for my user in this table.
Does this sequence have the influence described by you? Is that what you want to say?
Other point: Does the REFERENCE CUSTOMER is important for the B2B scenario? (Our case) Since I thought it was important just for B2C scenarios, It was the same number in SHOPADMIN Webshop creation.
In the meantime, I will create a new reference customer and change the webshop parameters.
Thanks for your inputs.
Regards,
Paulo Pela

Why i always get ask for the password

why i get ask for my password since two days every time i open my thunderbird?

You purchased the content... the fact that it failed to download does not change the fact that you purchased the content.

I BOUGHT IPHONE 4 FROM CHINA BUT WHY I DONT GET WARRANTY FOR IT IN INDIA SERVICE CENTER IS SAYING THEY CANT REPAIR IT CUZ ITS OUT COUNTRY HANDSET... M SO UPSET PLZ HELP ME OUT

i bought phone from china but i m from india and i m not getting warrenty in india....i m so upset with this type of feed back from authorised service center in india...how they can tell me that phone is out of warrenty cuz i biought it from china...is there anyone who can tell me if its true that we will not get warrenty for iphone in india

I am from Canada and have the Unlocked iPhone 4 and the phone is on LTE network, when I bought Apple Care + warranty I was told if I had problems I can get it fixed or replaced in Hong Kong. I was told the wrong thing.
I was at the Apple store in Causeway Bay, one of the Store TL from Toronto works there now, told me China/HK iPhone runs on a CDMA network and therefore cannot replace or exchange my phone for me. Their phones doesn't have LTE network.. That might be a problem for you in India. Every country's network is different and I think it's a case of miscommunications.
The iPhone 4 comes with your basic 1yr warranty, unless you purchased extended warranty for another 2 yrs which might have coverage at India. The best is to contact or email: Apple Warranty in the USA. They're awesome. They reply you back quickly & very informative.

Why has the transition changed for the Classic theme

Some years ago I asked how to have no transitions on a slideshow and I was told to use the Classic theme. This had Transition: None. I used this to convert many 4:3 photos to 16:9 HD for display on TV, one by one.
Now, when doing the same, the last second had the Dissolve feature even though it had Transition: None! Some how it has now changed to Transition: Dissolve and I can't find a way to change it back.
I'm using iPhoto 11 v 9.2.3, created 25/8/10 6.06am, modified 3/4/12 1.18am, on OS X 10.6.8.
My earliest backup (Time Machine) was 14/9/12 & has exactly the same iPhoto details. The modified date (3/4/12) was when I downloaded the 9.2.3 version. One photo previously modified is dated 27/11/12. Some how the transition changed since I used it even though iPhoto wasn't changed since a date 7 months earlier? I've reverted back to the 14/9/12 backup and it shows Transition: Dissolve even though that version was used for the photo and had None at the time!!!
I've tried modifying/deleting various iPhoto Plist files; iPhoto just modifies/re-creats them. I've even re-installed iPhoto from the original iLife disc onto the 14/9/12 system, but when I tried to use it it told me I have to get an upgrade. Upgraded to v 9.1 and upon opening it said it couldn't use the current photo storage space because it's a newer version (something like that) and asked if I wanted to Cancel or Create a new one and only gave Cancel as an option! Updating again creates v 9.2.3 (date: Today) and it has Transition: Dissolve.
I now believe there must be a file somewhere that contains this setting but, where and why wasn't it reset after restoring from backup?
Any help would be much appreciated.

I cannot check with your version any longer. But where have you checked the "Transition" setting?
Check in both places for the slideshow settings - the "All Slides" tab, and the "this Slide"tab for individual slides.
(This screenshot is from version 9.6 -sorry)
The properties of your slideshows will be stored in the iPhoto library. Have you run the First aid Tools to repair the permissions and the library?
Do the following:
To launch the "First Aid Tools" hold down the options-command keys ⌥⌘ while double clicking your iPhoto Library.
Keep the keys held down firmly until the First Aid panel appears.
Then select "Repair database" from the First Aid pane.
The may take a while for a large library.
Repeat with "Repair Permissions".

23.98 frame rate gets changed to 29.97?

I have a file that is a 23.98 frame rate.
I am trying to create a simple DVD file.
I use the pre-set in compressor for best quality.
I changed no other settings.
For some reason- the DVD files are compressed into 29.97(?)
When i play these in DVD studio pro I get interlaced lines and it looks very bad.
I imported the source file (23.98)- it's a bit large- but I was able to view it in playdown. And it looked fine.
I NEED to get these files reduced for DVD studio pro- BUT I DO NOT want to alter the frame rate.
I tried going into some deeper settings in Compressor and making sure everything was reading 23.98 progressive and it was.
It still spits out a 29.97 file.
help?

What camera was the footage shot on? If you open the movie in QT what does it say about the format?
(A screen shot of the inspector window would be best.)
Russ

Why do I get charged for data while I am connected to WiFi?

I am having issues with data usage on one of the 5 iPhones on my plan and have been keeping track of the data on all of the phones on my plan. I have noticed that I am being billed for data at night while I am sleeping and my phone is connected to my home wifi. Why is this? Is it just a way for Verizon to make more money?

Are you certain that you are connected to your home WiFi? If you are truly connected to WiFi, then the data connection from VZW should be disconnected. I would recommend checking your settings to ensure you are truly indeed connected to WiFi in your home and if so, then I would then suggest contacting Tier 2 technical support at VZW by calling 611 from another device so that you can work with support with your phone while on the line with them.
NOTE: iOS devices do NOT support WPS directly and if you are attempting to connect your home WiFi in this fashion, you will need to log into your home router and get the exact Paraphrase for your router and enter that into your iPhone.
Hope this makes sense and helps.
Best Wishes,
The Doctor

Why am I getting errors for swupd_syncd of Product ID: "091-7360" (Java Update)

The Software Update log has:
Tue Oct 22 03:01:16 XXX swupd_syncd[4534] <Error>: *** Product ID: "091-7360"; file URL: "http://swcdn.apple.com/content/downloads/35/57/091-7360/ise9pfxzzwi10qx4c2bygqf9llmcch6axd/JavaForMacOSX10.6.dst/091-7360.pt_PT.dist"[...]Tue Oct 22 03:01:17 XXX swupd_syncd[4534] <Info>: Finished downloading product: 091-7360Tue Oct 22 07:06:30 XXX swupd_syncd[15676] <Warning>: ignored invalid download request for product 091-7360, current state = PleaseMirror
There was http://support.apple.com/kb/TS3127?viewlocale=en_US&locale=en_US -- similar symptions fixed by the 10.6.3 update, but by now I'm at 10.6.8.

Unfortunately, I don't have an answer for you, but at least we can comiserate about the problem. I have 3 different 10.6 SUS installations that are having this problem. I've been trying to directly manipulate the downloaded files, settings, etc. I'm seeing that the downloaded files here:
/var/db/swupd/html/content/downloads/35/57/091-7360/
do not have any of the ".dst" distribution files for the various languages that should be there. I believe that must be the "incomplete download" part, but I've even copied those files from a 10.5 SUS download (all of the 10.5 SUS engines work w/ this Java update, BTW), still to no avail.
I've also tried manipulating the list of updates in the .plist here:
/etc/swupd/com.apple.server.swupdate.plist
by changing the flags for 091-7360 to "Mirrored" instead of "PleaseMirror", changing Enabled to "true", and things like that. I still cannot get SUS to be happy w/ this update. I think that if I had a better understanding of how all of these files tie together (you've got lists of updates in /etc/swupd, but also multiple catalog files in /var/db/swupd/html), I might be able to fool the thing into working. Alas, it appears to be beyond me, and I may have to just wait until another Java update for 10.6 is issued to be able to use SUS for it again.
Any further observations you may have would be quite welcome. Maybe we can put our heads together and figure this out.
Thx,
Fred

Positions of windows getting changed for different login languages.

Hi,
I have to create a script having original language EN and translated to HE (hebrew) for cheque printing.
I have created the layout having the main window and 8 other variable windows.
When I am executing the script in EN the alignment is coming ok.. but whenever I am printing through HE, the alignment changes and it seems the windows are getting aligned from right to left.
Is there any way possible to correct this, or can we dynamically change the position of the windows when we login through the different login languages.
Thanks.
Arindam.

Hi Venkataganesh,
The problem is that I need to create the same form for both EN (as the original key) and HE (as a translation) due to the programming standards we follow.
This is also a functional requirement of the development.
Though I know that this is difficult to implement, I myself might have found out the way to rectify the changes in window position.
You can create the form in EN as usual, but when you login through HE you need to do the following changes just before the print.
Customise local layout (Alt + F12) --> Charecter Set --> Hebrew (Right Justified)
Though I must say that since I do not have a printer configured to my ODC I have never really tested this but the print preview seems to come correct.
Would definitely like to know your comments on the above.
Regards,
Arindam.

Why conversion Rate gets changed for a reversal journal?

Similar Messages

Maybe you are looking for