Why do I get green frames on playback after speeding up a clip?

I sped up a two hour compound clip into twenty seconds and on playback there were lots of green frames flashing after rendering. Is there a limit on speeding up and slowing down?

If the reset and restore doesn't work, try and force your iPad into Recovery Mode (data will be lost)
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad

Similar Messages

I am getting some frames half black after rendering on AE CC using W7 processor I7. Who can help?

I am getting some frames half black after rendering on AE CC using W7 processor I7. Who can help?

Nobody without further information. What is in your comp? Any footage? If so, what format and codec? What format and codec are you render into? What are your computer's specs?
And all of this info too.

Why does itunes get locked with last update after clicking on search button ?

Why does itunes get locked with last update after clicking on search button ?

Why does itunes get locked with last update after clicking on search button ?

Why do I get repeating frames when exporting to QT MOV?

I have a Canon 7D and I'm shooting HD video files in 24p. I can import directly to the time
line in PE 7, but sometimes, when I export to a QT MOV file, the 3rd and 4th frame are exactly the same.
Original clips are fine, so it's something in the way PE 7 exports.
Strangely, I can have three clips on the time line, and two of the three will export fine, but one will show the duplicate frames!
I'm using the project setting of 1080i and timebase is 29.97 even though the camera is shooting at 23.97. Has anyone heard of this problem, and more importantly how to fix?
Thank you
Steve

I'm using the project setting of 1080i and timebase is 29.97 even though the camera is shooting at 23.97. Has anyone heard of this problem, and more importantly how to fix?
The Project Preset should match all aspects of your source footage. Having a disparity of 29.97 vs 23.97 will be problematic. Now, I am not sure what the options are for 24p footage in PrE 8.
Also, this ARTICLE links to many resources for DSLR footage and video editing.
Good luck,
Hunt
PS - welcome to the forum.

Why do I get a perfect realtime playback in iMovie but a jumpy one in Premier CS6?

If it's my hardware then I should get the problem in both programs. Am on a Macbook Pro, 10.6.8, NVIDIA GeForce GT 330M and have tried setting playback to 1/4 quality. I'm not using any crazy effects, the footage is HD from a Gopro. iMovie has no problem doing what I've tried doing so far in Premier.
Thanks for any help, am hoping I'm just missing some obvious setting as I'd like to be able to do my editing in Premier.
Leah =)

GoPro pretty much expects you to convert to the Cineform codec for editing. So much so, in fact, they bought the company.
The program is free. I suggest that you take a look at it before doing any more editing of GoPro footage.
http://gopro.com/3d-cineform-studio-software-download/

Why do my FCP drop frames on playback working on HD movies?

Working on HD movies may machine drop frames after I cut the secuense. Why?
Model Name:          Mac Pro       OS X    V. 10.6.8
Model Identifier:          MacPro5,1
Processor Name:          Quad-Core Intel Xeon
Processor Speed:          2.4 GHz
Number Of Processors:          2
Total Number Of Cores:          8
L2 Cache (per core):          256 KB
L3 Cache (per processor):          12 MB
Memory:          14 GB
ATI Radeon HD 5770:
Chipset Model:          ATI Radeon HD 5770
Type:          GPU
Bus:          PCIe
Slot:          Slot-1
PCIe Lane Width:          x16
VRAM (Total):          1024 MB

lots of numbers.
what's missing:
How's your Events drive connected, internal or external? if ext, usb2/3/fw/tb?
Are you using Optimized media? Proxies? if not, what codec?
Finally: complexity of Project - multicam, color correction, multiple tracks?

Why do I get low frame rate for games while charging?

I have a Lenovo g505s laptop , and when I play games while charging(plugged in) , the frame rates for every game drop to 15-20 fps. Is there any driver update that I require? Or any other solution to this problem?
Solved!
Go to Solution.

hi thematrix01,
Welcome to Lenovo Community Forums!
Can you try running a BIOS update and see if that will fix it.
Make sure to read the read Me file first.
BIOS Update
Read me
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Why would I get server cannot be contacted after a few hours of browsing?

I've had this problem since for several years, probably going back to v15 or so. Firefox loads and works fine for a while. Then, suddenly, for reasons I do not understand, it refuses to load any more webpages. I get a "server cannot be found" error. It's like Firefox forgets how to do an IP lookup, or gets a bogus answer that redirects to an IP that is bogus. It doesn't wait or timeout either. Once I get it once I cannot browse to any website until I close Firefox and reopen the program. Even opening new browser tabs or windows doesn't help. I have to completely exist Firefox (all instances).
I would like to note that if it is "about to break", when I click a link, bookmark, or type in the web address, when I hit enter it fails within a second or two. It doesn't sit around and timeout after 30 seconds.
I don't feel like I'm doing anything that is out of the ordinary. I have a few plugins, but this happens on multiple computers, including some that have no plugins disabled.
Here's things that may be affecting this behavior for me:
1. I use a hosts file to block a lot of spammy websites. I use a program called hostsman to handle the hosts file. I have the DNS service disabled because it cannot handle the number of entries that are in the hosts file. (been using this for more than 10 years)
2. I have disabled disk caching (I use an SSD and I have found that disk caching creates more problems for browsing than its worth). I still do the in-RAM caching, and it's not uncommon for Firefox to be using 1GB of RAM or so. I don't think I've ever seen it use more than about 1.2GB of RAM. All of the systems have massive amounts of free RAM. My main desktop has 64GB of RAM, with 75-80% of it free typically.
I've also seen this at different physical locations (home, work, other side of the country at friend's house's, etc.). This problem only affects Firefox. I haven't seen it on Chrome or Internet explorer (albeit I don't use them for hours on end). I typically have this issue a few times a day. I do work from home, and most of my work is in the browser, so it can be a bit annoying.
Right now my hardware on this machine is:
Lenovo Y55 with 16GB of RAM, i7-4700HQ and 512GB SSD. Other systems are far more powerful than this one, so I tend to think that hardware is not the problem.
Thanks.

I don't have an answer for you, but we did receive some reports of this after the release of Firefox 36. One Firefox 36 user also believed that Firefox had stopped sending DNS requests, which is a prerequisite to being able to connect to the web server. Perhaps it became more frequent for you as well, since otherwise, you probably would have posted this a few years ago...
I don't recall that we identified the source of the problem, but in many cases, it was "something" in the settings folder.
Along those lines, could you conduct this test:
'''Create a new Firefox profile'''
''This is in addition to and does not replace your existing settings.''
A new profile will have your system-installed plugins (e.g., Flash) and extensions (e.g., security suite toolbars), but no themes, other extensions, or other customizations. It also should come with completely fresh settings databases and a fresh cache folder.
Exit Firefox and start up in the Profile Manager using Start > search box (or Run) -- type or paste the following and press Enter:
firefox.exe -P
''Don't delete anything here.''
Any time you want to switch profiles, exit Firefox and return to this dialog.
Click the Create Profile button, assign a name like April7, and ignore the option to change the folder location. Then start Firefox in the new profile you created.
It might take a while to determine whether the new profile is works better than your old one. If you want to import your bookmarks from your regular profile during that time, here's how:
You can use the Library dialog (Ctrl+Shift+b or "Show All Bookmarks") to access the Restore feature. The trick is knowing where to find your bookmark backups in your regular profile. After clicking Choose File... you can paste this into the file name space and press Enter to drill down to your profile folders:
%APPDATA%\Mozilla\Firefox\Profiles
The semi-randomly-named folder that has your last backup is usually the one ending with "default". Click into that one, then into the '''bookmarkbackups''' folder. Here you can pick the most recently updated file to restore.
Important: restoring a bookmark backup wipes any bookmarks currently in your active Firefox profile and replaces it with the contents of the backup file.
I think it's also reasonable to install AdBlock Plus, LastPass and SQLite Manager, as those, by themselves, are unlikely to be the source of this seemingly rare problem. But I wouldn't add all your extensions at once to the new profile.

Why am I getting '500 Internal server error' after installing CF 10?

Hello,
I am not able to get to CF admin after installing CF 10. I am getting a '500 internal server error' along with the following message. How do I get around it? Thanks.
Best regards,
Chung Lee
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: java.lang.NullPointerException coldfusion.bootstrap.ClassloaderHelper.initServletClass(ClassloaderHelper.java:129) coldfusion.bootstrap.BootstrapServlet.init(BootstrapServlet.java:59) org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:472) org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:98) org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:928) org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:414) org.apache.coyote.ajp.AjpProcessor.process(AjpProcessor.java:203) org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.java:539) org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:298) java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145) java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615) java.lang.Thread.run(Thread.java:722)
root cause
java.lang.NullPointerException coldfusion.CfmServlet.init(CfmServlet.java:82) coldfusion.bootstrap.ClassloaderHelper.initServletClass(ClassloaderHelper.java:121) coldfusion.bootstrap.BootstrapServlet.init(BootstrapServlet.java:59) org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:472) org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:98) org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:928) org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:414) org.apache.coyote.ajp.AjpProcessor.process(AjpProcessor.java:203) org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.java:539) org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:298) java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145) java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615) java.lang.Thread.run(Thread.java:722)
note The full stack trace of the root cause is available in the Apache Tomcat/7.0.23 logs.

Anit,
The following is from the workers.properties:
worker.list=cfusion
worker.cfusion.type=ajp13
worker.cfusion.host=xxx.xxx.xxx.xx (My work does not allow me to reveal IP address.)
worker.cfusion.port=8012
worker.cfusion.max_reuse_connections=250
worker.cfusion.connection_pool_size=500
worker.cfusion.connection_pool_timeout=60
As for the exception log, it's showing the following:
"Error","pool-2-thread-1","06/02/14","13:00:00",,"Unable to initialise Monitoring service: java.lang.NoClassDefFoundError: Could not initialize class coldfusion.featurerouter.FeatureRouter"
java.lang.NoClassDefFoundError: Could not initialize class coldfusion.featurerouter.FeatureRouter
    at coldfusion.server.CFService.setupMonitoringService(CFService.java:464)
    at coldfusion.server.CFService.start(CFService.java:671)
    at coldfusion.server.j2ee.CFStartUpServlet.startCFService(CFStartUpServlet.java:110)
    at coldfusion.server.j2ee.CFStartUpServlet.init(CFStartUpServlet.java:86)
    at javax.servlet.GenericServlet.init(GenericServlet.java:160)
    at coldfusion.bootstrap.ClassloaderHelper.initServletClass(ClassloaderHelper.java:121)
    at coldfusion.bootstrap.BootstrapServlet.init(BootstrapServlet.java:59)
    at org.apache.catalina.core.StandardWrapper.initServlet(StandardWrapper.java:1266)
    at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1185)
    at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:1080)
    at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:5001)
    at org.apache.catalina.core.StandardContext.startInternal(StandardContext.java:5278)
    at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:150)
    at org.apache.catalina.core.ContainerBase$StartChild.call(ContainerBase.java:1525)
    at org.apache.catalina.core.ContainerBase$StartChild.call(ContainerBase.java:1515)
    at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:334)
    at java.util.concurrent.FutureTask.run(FutureTask.java:166)
    at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
    at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
    at java.lang.Thread.run(Thread.java:722)
"Warning","Thread-10","06/02/14","13:00:00",,"Graphing service is unavailable"
java.lang.NullPointerException
    at coldfusion.graph.GraphingServiceImpl.setUpWatermark(GraphingServiceImpl.java:220)
    at coldfusion.graph.GraphingServiceImpl._initializeGraphingEngine(GraphingServiceImpl.java:1 44)
    at coldfusion.graph.GraphingServiceImpl.access$300(GraphingServiceImpl.java:40)
    at coldfusion.graph.GraphingServiceImpl$2.run(GraphingServiceImpl.java:125)
"Error","Thread-12","06/02/14","13:00:01",,"The Runtime service is not available. This exception is usually caused by service startup failure. Check your server configuration."
coldfusion.server.ServiceFactory$ServiceNotAvailableException: The Runtime service is not available.
    at coldfusion.server.ServiceFactory.getRuntimeService(ServiceFactory.java:117)
    at coldfusion.document.DocumentServiceImpl.initializeDocumentService(DocumentServiceImpl.jav a:219)
    at coldfusion.document.DocumentServiceImpl.access$000(DocumentServiceImpl.java:52)
    at coldfusion.document.DocumentServiceImpl$1.run(DocumentServiceImpl.java:180)
--Chung

Why is AE getting error writing a file after finishing a render?

I have been trying to create an MPEG4 file from a comp. It renders successfully - at least, it does not display any render errors - but then gets an error when writing the file. It creates a file, but the file cannot be opened by Quicktime, nor Premiere Pro.

Use Adobe Media Encoder to create MPEG-4 files.

Why i'm getting a warning 1021 even after changing The maximum number of connections per source (Unlimited) ?

The maximum number of connections per source (Unlimited) for this connector has been reached by this source IP address.

Hi Arun,
In order to figure out the source of the problematic IP, we need to collect the following logs:
Detail messages of the Error 1021 including the blocked IP address.
Protocol log. We can search the specific IP address in the log to find more information about the sender. Here is the reference of
Using the EAC to configure protocol logging.
Besides, use the command below to verify if they are set as expected:
Get-ReceiveConnector -Identity "this connector name" | select Message*,MaxInbound*
Regards,
Rebecca

Why Do I get 0h hours for resources after using Resource Levelling in Project 2010?

Hi,
We are using MSProject 2010 and Project Server 2010 with Enterprise resources. All resources on all projects in the enterprise are shared resources. We are finding that after resource levelling is applied to the project some resources are only
being assigned a fraction of their total availability, and in some cases Project will assign 0 hours to a resource for several consecutive weeks even though the resource has capacity for the week the task is scheduled to start.
For example: Let's say we have a task that is scheduled to start on 1-20-14. The task is a 112 hours of effort with no constraints and one resource assigned to it. The resource is available 40 hours per week for the next 4 weeks. After resource
levelling I would expect Project to assign the resource as follows: 40 hours in week 1, 40 hours the next week and 32 hours the next week, for a total of 112 hours. Instead, Project does not assign the resource to the task until week 4 (even
though the resource has capacity on the start date of the task) and pushes the finish date out. In some weeks the resource has 0h hours showing in the timephased grid on the Resource Usage sheet. We have experimented with the levelling settings and it
does not seem to matter which boxes are checked, but following is our preferred settings:
1. Levelling Calculations set to Manual
2. Look for overallocations on a day by day basis
3. Clear levelling values before levelling is CHECKED
4. Level entire project is selected.
5. Levelling order is Priority,Standard
6. Level only within available slack is CHECKED
7. Levelling can adjust individual assignments on a task is CHECKED
8. Levelling can create splits in remaining work is UNCHECKED
9. Level resources with the proposed booking type is UNCHECKED
10. Level manually scheduled tasks is CHECKED.
Does anyone have any ideas about why Project is not using the resource's available capacity?
Thanks, Judy

Hi Judy,
Thanks to give us more detail. But actually if you need to level a resource, it means that this resource is overallocated. In your example, since it is not overallocated on the 12weeks task you mention, it means that it should be assigned on another task.
If not, there would be no need to perform any resource levelling.
Concerning the fact that levelling assign resource at 0hr per week, this can be absolutely normal.
Imagine that you have a resource working at 100% on 2 tasks on the same period. imagine also that there is actual work on one of the 2 tasks. Project will level the resource, meaning that it will move ahead the remaining work of one of the task (depending
on the levelling parameters). But the actual work will not move, thus between the actual work and the moved-foreward remaining work, the resource will be assign at 0hr by time period on the splitted task.
Please check all the task of the levelled resource and actual work.
See in my example below:
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

Why i cant get to work my wifi after upgrading to iOS 6 ? It says unable to join network., why i cant get to work my wifi after upgrading to iOS 6 ? It says unable to join network.

Please help ?

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Why am i getting a BSOD when using after effects "CC Wide Time"

If I preview my footage whilst using the "cc wide time" effect, my PC Crashes to a blue screen of death.
I'm using CS6 Creative cloud, any suggestions?
Problem signature:
Problem Event Name:    BlueScreen
OS Version:    6.1.7601.2.1.0.256.48
Locale ID:    2057
Additional information about the problem:
BCCode:    124
BCP1:    0000000000000000
BCP2:    FFFFFA8007520028
BCP3:    00000000B4002000
BCP4:    0000000036000135
OS Version:    6_1_7601
Service Pack:    1_0
Product:    256_1

Which application are you using to preview, Premiere Pro?

Why am I getting the same error message after replacing with a new cartridge?

I have replaced the cartridge with two different new HP cartridges, but the message continues to say that cartridge is empty. In addition, it won't even allow me to print in black only. Any suggestions?

Please read this post then provide some details. What printer model? What operating system? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth?
Are you using refilled/reman cartridges? These usually have not been reset to show proper ink levels. In this case contact your supplier or use genuine HP cartridges.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Why do I get green frames on playback after speeding up a clip?

Similar Messages

Maybe you are looking for