Why do I get 'Unable to display Clip Book'?

It was working fine some months ago but not now.......
geoff44

Mmm... i imagine it's a combination of the 5.1 disc, and intel machine...
here's a little thing to have a look at... try it on both machines and cross reference what you find...
Go to your applications folder and control-click (right-click) on the FCP application logo...
from the list that opens, click on Show Package Contents
from here go... Contents > Resources > zh_CN.lproj > FXScripts > Filters/Generators
... and see if you can locate the effects/filters on the Intel machine... and see if you can copy them over to the PowerPC...
I'm not sure. Going by what that post says, these effects/filters are not scripts so you might not find them...
The post implies that the Intel machine is using more hardware grunt ( which the PowerPC does not have?) to utilize these effects...
DISCLAIMER... I have NEVER copied any effects/scripts from this folder from within the FCP application, so please do so at your own risk...... but they're only files, so hey, what can go wrong!?!?!
I have deleted files from within the FCP app, and i'm still running...
Perhaps one of the FCP masters might want to chip in here and give it the all clear... mind you, worth having a look and seeing what you can find in the meantime...
good luck.
J

Similar Messages

  • How do I get rid of 'Unable to display Clip Book'?cc=US

    1) How do I get rid of 'Unable to display Clip Book' so I can see what's in the Book?
    2) How do I increase the font size so I can read what's in the Book AND print it?
    Any help appreciated
    Geoff Brown

    You have to create a new Apple ID by following the steps in this article: http://support.apple.com/kb/ht2534.

  • Why am I getting unable to purchase message from App Store with free apps

    Why am I getting unable to purchase message from App Store for free apps on my I pad?

    Sign out of your Apple ID, reboot yor iPad and sign in again.
    Settings>iTunes and App Store. Tap your ID and sign out.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    Go go back to Settings>iTunes & App Store. Sign in. Try to download the free apps again.

  • Why do i get "unable to join"

    I'm getting "unable to join....network" when I type exactly the correct password.

    Settings>General>Reset>Reset Ntework Settings

  • Why do users get "unable to set template properties" message?

    Hi there,
    I am trying to administer a new site that was created with DW and has a .dwt (Templates/ locatedat the site root). I'm creating "Publisher" role connection keys so users can edit their subsections of the site. Users should be able to modify template properties when they edit/create new pages.
    While testing the keys, the users report that they can connect and edit pages. However, when they try to modify template properties on either a new or existing page, they get this message "Unable to set template properties" and are prevented.
    I've tried redefining the site and starting all over, tried CS3 vs. CS4 to see if it was a compatibility issue, looked at forum after forum but can't find any answers. I am experienced with DW but new to Contribute administration so I don't know what else to try. Hoping that someone will have encountered this before and can suggest a solution.
    Thanks in advance!
    ps- Let me know if there's other info I can provide to help troubleshoot.

    I did find this April 9, 2009 post from majtom2grndctrl that suggests the issue is how contribute treats https:// sites. My site is set up as majtom2grndctrl described and I am having the same problem.
    "I've got a problem with not being able to edit Template Properties on our test sites we host on HTTPS servers. I've narrowed down the problem to Contribute CS4 ignoring the website root configuration when it looks for the Templates folder. For example, say you have a site hosted at the following address:
    https://www.yourdomain.com/yourfolder/
    Contribute is configured to know your site is in /yourfolder/, but for whatever reason, when you open or create a page, and Contribute reads the InstanceBegin template="/Templates/file.dwt" tag at the beginning of HTML documents, it looks for a Templates folder at the HTTP server root, not in /yourfolder/. This prevents Contribute from loading the template while editing a document, and any attempt to edit Template Properties will yield the infamous "Unable to set template properties" dialog box."

  • Why do I get "unable to load" on some effects?

    I am having problems with transfering project between edit suites.
    Both suites run OSX 10.4.9
    Both suites have FCPro 5.1.4
    Both suites have Blackmagic Decklink cards.
    The only difference between the suites is that one is an older PowerPC G5 the other a new Intel Xeon.
    When transferring a project from the Intel machine to the PowerPC we are experiencing :
    'Unable to load effect "Prism".'
    'Unable to load effect "Kaleidoscope".'
    'Unable to load effect "Color Solid".'
    As both suites are running FCPro 5.1.4 I would expect these effects to transfer across but these effects are missing in the PowerPC effects bins - but why?
    Are these effects specific to the Intel version of 5.1.4?
    Any thoughts appreciated.

    Mmm... i imagine it's a combination of the 5.1 disc, and intel machine...
    here's a little thing to have a look at... try it on both machines and cross reference what you find...
    Go to your applications folder and control-click (right-click) on the FCP application logo...
    from the list that opens, click on Show Package Contents
    from here go... Contents > Resources > zh_CN.lproj > FXScripts > Filters/Generators
    ... and see if you can locate the effects/filters on the Intel machine... and see if you can copy them over to the PowerPC...
    I'm not sure. Going by what that post says, these effects/filters are not scripts so you might not find them...
    The post implies that the Intel machine is using more hardware grunt ( which the PowerPC does not have?) to utilize these effects...
    DISCLAIMER... I have NEVER copied any effects/scripts from this folder from within the FCP application, so please do so at your own risk...... but they're only files, so hey, what can go wrong!?!?!
    I have deleted files from within the FCP app, and i'm still running...
    Perhaps one of the FCP masters might want to chip in here and give it the all clear... mind you, worth having a look and seeing what you can find in the meantime...
    good luck.
    J

  • Why am I getting "Unable to load a labview run-time engine because teststand is shutting down" error?

    After running a successfull TestUUT's in a custom UI.  I exit my UI, then open it again and I get Error Code -17338.
    See attached for detail .jpg
    Collegues of mine suggest it's because I haven't closed a reference somewhere, but I have closed everything possible.
    Any suggestions?

    Perry,
    Thanks for getting back to me today.
    I have closed everything I know how to and compared to the Simple OI. 
    You mention closing the Application manager, but I don't see that happening anywhere.  Do you mean closing the application, and engine, and etc...?  I have never closed the "Application Manager" specifically and am not sure how.
    I have attached an image of how I close things up.
    Thanks,
    Attachments:
    CloseRefs.jpg ‏218 KB

  • Why am I getting  'Unable to signon to the Source Database.' just prior to 'Running the DBTSFIX Report' step.

    We are upgrading from Tools 8.53 to Tools 8.54 in HCM. I am receiving logging event 'Unable to signon to the Source Database.' just prior to 'Running the DBTSFIX Report' step. I found case 1545297.1 where it said to choose initial move as opposed to move

    For Tools only upgrades, while creating the jobs, you should choose 'Initial' and not 'Move to production'
    An excerpt from http://docs.oracle.com/cd/E56736_01/psft/acrobat/Getting_Started_on_Your_PeopleTools_Upgrade_08_2014.pdf is given below
    MTP indicates that this step runs only in Move to Production upgrade passes. The step is not applicable to the initial pass. This is not applicable for PeopleSoft PeopleTools-only upgrades.

  • Why would i get a thunderbolt display instead of Dell's 24″ ultra-HD display, the UP2414Q.

    I'm searching for a display to hook up to my macbook for more room to work.  I've heard the thunderbolt isn't the way to go right now because it hasn't been updated since it came out three years ago.  What are your thoughts on the display and if you don't use the thunderbolt what other display do you use? I've heard a lot of good things about Dell's 24" ultra-HD display UP2414Q. Also, has anybody heard anything on when they will come out with the new updated thunderbolt?

    I have purchased the display screen today after been using my dell 24 inch monitor for the past 2 years
    I know it is pricey but i have to say it is worth every penny. I use my macbook to produce music so everytime when i come back home and hook it up, i have to plug in my power charger, firewire, usb external drive, usb hub, thunderbolt to DVI display and it makes my desk really messy.
    Now i have got everything plugged in to my monitor which is neatly stored behind and all i have to do is plug in the thunderbolt cable and I am all set up, plus it comes with a charging cable which i think is brilliant!
    The screen has been out for 3 years but the quality is absolutely stunning! yea it cost a lot more than other 24 - 27 inch screens but i think it is worth every penny in my case.
    If you just use your macbook for simple stuff like serving the net then it is probably not worth getting

  • Unable to display page after database clone

    We are currently running Application Express 4.02 using Oracle Web Logic on a Suse Linux 11 server. We had a new database set up for APEXPRD port 1542 that was working correctly with application express. We also had a database set up for APEXTST port 1542 (on a different database server). We removed the APEXPRD database from the database server using DBCA and then used OEM to clone the APEXTST instance to the production server. Our new database instance has the name APEXPRD with the port 1542. We have recycled all services on the APEX server but our APEX Production site no longer runs -- just getting unable to display page error 404. We checked our dads.conf file to ensure no changes were needed but everything appears correct there since the database name and port did not change.
    Is there anything within the database or any other configuration files that I would need to change to get APEX to work after a database clone?
    Thank you!
    Amber

    We got this resolved...We modified the dads.conf file to show the debug information in the browser window. From this we found where our cloned database had no temporary datafile. Once this datafile was created the APEX works correctly.
    Thanks!

  • I keep getting "Unable to connect" for my firefox. It was working yesterday and I turned my computer off. I can get to the web using internet explorer 9. I don't know why my firefox is not working. Everything else is working. HELP....

    I keep getting "Unable to connect" for my firefox. It was working yesterday and I turned my computer off. I can get to the web using internet explorer 9. I don't know why my firefox is not working. Everything else is working.

    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.com/kb/Server+not+found
    *https://support.mozilla.com/kb/Firewalls

  • HT1689 Why do I keep getting unable to purchase from iTunes Store try again later ?

    Why do I keep getting unable to purchase from iTunes Store try again later ?

    Hi Nanas12,
    Thanks for visiting Apple Support Communities.
    If you continue to see an "unable to purchase" message on the iTunes Store, I recommend the troubleshooting steps in this article:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Cheers,
    Jeremy

  • HT5557 Why do I get a Message "Unable to Open Book" and how do I fix it?

    Why do I get a Message "Unable to Open Book" and how do I fix it?

    This issue can be caused by the presence of leftover files in the Firefox program folder (defaults\pref) like a file firefox.js that overrides the update URL with a wrong link.
    Do a clean reinstall and be sure to remove the Firefox program folder to remove the file(s) that cause the problem.
    Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    See:
    * [/questions/826858]

  • Unable to get the graphical display of Business process in BPMon

    Hi,
    I am working on solution manager 7.1. I have set up a business process for monitoring in the BPMon session. But i am not getting the graphical display in the business process operations workcenter in the graphical view tab.
    Can anyone tell me how can i get that.
    Regards
    Vishal

    Hi,
    Please run run report RTCCTOOL and see if any addon is not up-to-date.
    Please run this repport and follow the recommendations to update those
    components to the latest status.
    Afterwards please also intall the latest version of following note: 1570282 - Advance Corr. BPMon ST-A/PI 01N
    Finally please deactivate BPMon, regenerate and re-activate agin.
    Also check BPM troubleshooting guide:
    https://websmp102.sap-ag.de/~sapdownload/011000358700001186112010E/
    Troubleshooting_for_BPMon.pdf
    Thanks
    Vikram

  • Unable to Display This Video

    Watching videos at nbcnews.com, some days get message: Unable to display this video. The ads always display, but not the stories.  And only some days. Why?

    You're right that when the apps are available they work better than Safari.  I can't find one for The Last Word, which is my favorite show.  And like I said, the problem seems to be intermittent, so I don't believe that its a Flash issue.  Actually, it's been a couple of days now since I could view The Last Word, so perhaps they are doing something different with their coding than before.
    Thanks for your suggestions... They are helpful.  :-)

Maybe you are looking for