Why do I keep getting the message; Network error occurred?

Whenever I try to send an email. The message in the outbox states the sending failed. When I click on that email, it simply states that, Network error, occurred.
What is causing this network error?

Hello,
Thank for the reply. My zip code is: 19702.
My browser is the latest Android. Completely stock. I can access the internet. I don't use chrome.
I get the message only when I try to send emails from my Verizon email account. I can sometimes receive email but not all the time. I cannot send emails at all once this happens. I can send and receive emails from other email accounts except Verizon (that is why I am using Hotmail).
If I completely deleted my Verizon account, restart my phone, than add my account back on to the phone, it will work for a couple of emails than I will get the message; send fail. Network error occurred.
Sent from my Verizon Wireless 4G LTE smartphone

Similar Messages

I keep getting the message"an error occurred while trying to access the service". does anyone know what i need to do to resolve this problem. I am trying to convert apdf file for msword?

I keep getting the message"an error occurred while trying to access the service". does anyone know what i need to do to resolve this problem. I am trying to convert a PDF file for ms word?

Adobe Reader is free; but you may have paid for the ExportPDF service.
Contact Adobe Customer Care and click on the Still need help? button to chat with an agent.
[topic moved to ExportPDF forum]

I keep getting the message "an error occurred downloading this content" does anyone know how to fix this?

I rented a movie but I can't seem to play it. I keep getting the message an error occurred downloading this content. Please try again later. It doesn't tell me how much later, but I've tried off and on for a week and I can't seem to resolve it.

Welcome to the Apple Community.
This sometimes resolved by unplugging the Apple TV for a few moments and trying again, others have found restarting the router may help. Another reason that message can occur is when the download speed is extremely slow, have you tested your Internet download speed with speediest.net.

Is it possible to run BBC iPlayer from an iPhone4 through AirPlay to Apple TV2 please? I keep getting the message "An error occured loading this content. Please try again later"

Is it possible to run BBC iPlayer from an iPhone4 through AirPlay to Apple TV2 please? I keep getting the message "An error occured loading this content. Please try again later"

First, try a system reset on the iPod. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If that doesn't work, reset the Apple TV. I'm not at mine right now and I'm talking from memory but the reset is somewhere in the Settings menu.

I am having problems getting my I pod to sync .I keep getting the message unknown error occurred with the designation (13019) I have taken itunes off the computer and reuploaded but get the same message as before the tunes are in the library

I keep getting the message unknown error (13019) I uploaded the upgrade for I tunes and bought some music and that went ok but when I went to sync it everything goes ok till the end and I get the error message .I took I tunes off the comuter and re downloaded it ,but the process is the same

Did you try all the suggestions mentioned in this article? iTunes Error 13019 during sync
Some users solved the problem by removing duplicate songs: https://discussions.apple.com/message/17047386#17047386

Keep getting the message "An error occurred with the publication of album - Do you want to remove the album from your library?" don't know why

I don't know why I keep getting the following messge for a recent album I created in iphoto:
"An error occurred with the publication of album (name of album). Do you want to remove the album from your library?" In smaller letters under that message, is "The feed could not be found or is invalid." There are 2 buttons to click - either "Remove Album" or "Keep Album". Never had this issue before, did not do anything different this time.
Mac OS X v. 10.6.8
iphoto 09 v. 8.1.2 (424)

Is this an album you're publishing as a MMe Gallery? If so delete the album and gallery, create a new album and gallery and try publishing again.
OT

I keep getting the message, an error occured while trying to access the service. I need urgent help!

Please can someone let me know how long ExportPDF will be down for. I keep getting this message and i have an urgent work task

Alice, you are very kind. I am in the Pacific NW - so PST is my time zone. It's past midnight here.
There are a few ways to contact them:
https://www.acrobat.com/misc/en/contact-support.html
or:
http://forums.adobe.com/docs/DOC-1515 if you scroll down it gives you the option...
or:
Our phone number is 800-833-6687
I apologize, I just really wanted to get this solved for you.
Please let me know the outcome.
Sincerely, Stacy

HT1491 Why do i keep getting the message 'Cannot connect to iTunes Store' when I have done every connection I can find? What does the error message (-1202) mean when I am on the iTunes site on my computer?

Why do i keep getting the message 'Cannot connect to iTunes Store' when I have done every connection I can find? What does the error message (-1202) mean when I am on the iTunes site on my computer?

Hi Velvalee,
While there may not be specific information about that error, here is an article of steps for troubleshooting connectivity issues with the iTunes store:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
If that article does not help, there is a link near the bottom for an additional article of advanced troubleshooting.
Cheers!
- Ari

Why do I keep getting the message "key not valid for use in specified state"?

why do I keep getting the message "key not valid for use in specified state"?

You need to deal with Adobe Customer support. This is a Photoshop User forum the is also one for LR may be some on over there has encountered you problem Photoshop Lightroom

HT201303 why do i keep getting the message "Please contact iTunes support to complete this transaction."?

why do i keep getting the message "Please contact iTunes support to complete this transaction."? Oh, and I would love to contact support but they are never open for business when this happens to me so I was hoping someone knew what the heck was going on. I love my ipad and hate that I can't get the in app purchases that I need in order to advance to the next level to buy if I don't want to start the whole game again!! Please help. Let me know what you did to bypass this or get an itunes associate on the phone or what ever so I can solve this NOW!?

You can contact iTunes support via email via this page and ask them why you are getting the message and how to resolve it (I'm not aware of any phone support for iTunes) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Why do I keep getting the message that iTunes is quitting working? I have reinstalled iTunes and I have checked the WiFi twice. I have even put the internet cable directly into the laptop and still I cannot connect to the iTunes. Offers no solutions.

Why do I keep getting the message that iTunes is quitting working? I have reinstalled iTunes and I have checked the wifi twice. I have even put the internet access cable directly into the laptop. The message says that windows will look for a solution but never offers any solution.

Try disconnect your internet, then launch iTunes.
Connect your device, then reconnect your internet.
See if this resolves the issue.

Why do I keep getting the message, "Safari can't open the page because Safari can't find the server"?

Why do I keep getting the message, "Safari can't open the page "www.blahblah.com" because Safari can't find the server" and you can replace the website with almost any I try to open. Any ideas or solutions?

Do you have other wireless devices connected to this same router? Do they work?
I really can't help you much but to say that when my router exhibited this issue it was accross the board (all notebooks would connect immediately following a router restart, but would loss connectivity until I rebooted the router again). In my case the only solution that was permanent was to replace the router.
You may also try restarting the phone and the router, setup security - WEP - (or disable security) on the router and phone, and/or try a different wi-fi channel (may actually help).

Why do I keep getting the message "startup-disk is full"?

Why do I keep getting the message "startup-disk is full"?
I checked my memory and it says...
FREE- 2.64GB
WIRED-885.5MB
ACTIVE-237.0MB
INACTIVE-262.9MB
USED-1.35GB
Sorry I know nothing about computers.

Ideally an external HD, but at a pinch you may be able to get enough on to USB thumb drives to free up enough space to carry out an orderly backup.
Just remember that you need to move the files, not just copy them; in other words, once the file is on the thumb drive, the original needs to be deleted and the trash emptied to free up the space on your internal. So for any really important stuff you may wish to copy it to more than one drive for safety.
also see;
Freeing space on your Mac OS X startup disk
http://www.thexlab.com/faqs/freeingspace.html
How to free up my disk space
http://www.macmaps.com/diskfull.html

HT1645 I am trying to burn an imovie I made. I keep getting the message multiplex error. The imovie will not burn to a idvd.

I am trying to burn an imovie to a DVD. I keep getting the message multiplex error. I do not know what to do. Please, can anyone help me.

Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev. (Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W

Why do I keep getting tihs message ArgumentError: Error #2015: Invalid BitmapData.

ArgumentError: Error #2015: Invalid BitmapData.
at flash.display::BitmapData/ctor()
at flash.display::BitmapData()
at com.king.flash.spaceland.texture::TextureManager/clearDynamicAtlasResource()
at com.king.flash.spaceland.texture::TextureManager/clearDynamicAtlas()
at com.king.flash.spaceland.texture::TextureManager/createDynamicAtlas()
at com.king.ragnarok.spaceland.atlas::DynamicAtlasFactory/createDynamicAtlas()
at com.king.stritz.juego::ProfilePictureLoader/load()
at com.king.stritz.juego::ProfilePictureLoader/loadProfilePictureWithSocialUser()
at com.king.stritz.juego::ProfilePictureLoader/loadProfilePicture()
at com.king.stritz.view.spaceland.diorama::DioramaPortraitsView/setUpCurrentUser()
at com.king.stritz.presenter.diorama::DioramaPortraitsPresenter/show()
at com.king.stritz.presenter.diorama::DioramaPresenterImpl/show()
at com.king.stritz.state.main::DioramaMainState/onEnterState()
at com.king.stritz.state::TransitionAction/onTransition()
at se.fearless.fettle.impl::Transition/onTransition()
at se.fearless.fettle.impl::TransitionModelImpl/forceSetState()
at se.fearless.fettle.impl::TransitionModelImpl/fireInternal()
at se.fearless.fettle.impl::TransitionModelImpl/fireEvent()
at se.fearless.fettle.impl::StateMachineImpl/fireEvent()
at com.king.stritz.state::StateChanger/requestStateChange()
at com.king.stritz.state.main::PerformanceCheckState/changeState()
at com.king.stritz.state.main::PerformanceCheckState/onEnterState()
at com.king.stritz.state::TransitionAction/onTransition()
at se.fearless.fettle.impl::Transition/onTransition()
at se.fearless.fettle.impl::TransitionModelImpl/forceSetState()
at se.fearless.fettle.impl::TransitionModelImpl/fireInternal()
at se.fearless.fettle.impl::TransitionModelImpl/fireEvent()
at se.fearless.fettle.impl::StateMachineImpl/fireEvent()
at com.king.stritz.state::StateChanger/requestStateChange()
at Function/PreloadingState.as$0:anonymous()
at Function/Assets.as$1:anonymous()
at com.king.ragnarok.spaceland.assets.zip::ZipAssetLoader/callback()
at Function/ZipAssetLoader.as$0:anonymous()
at Function/ImageDecoder.as$0:anonymous()
at Function/onComplete()

Hi Chris
Thanks for getting back to me. I need to be sure the Flash Player I will be installing is for windows 8.1. Can you help me with that please.
Thank you so much. Luetta
From: chris.campbell <[email protected]>
To: Luetta Marshall <[email protected]>
Sent: Friday, May 1, 2015 3:43 PM
Subject: why do I keep getting tihs message ArgumentError: Error #2015: Invalid BitmapData.
why do I keep getting tihs message ArgumentError: Error #2015: Invalid BitmapData.
created by chris.campbell in Using Flash Player - View the full discussionHi Luetta,I think the confusion here is that you are seeing a message that was meant for Flash Player developers, and Namisha assumed you were debugging your own flash code. If you are simply trying to use Flash Player, we'll need to uninstall the debug version of Flash and install the regular version instead. Assuming you are on Windows, here are the steps required: 1. Uninstall Flash Player by downloading and running this program: http://download.macromedia.com/get/flashplayer/current/support/uninstall_flash_player.exe 2. Once uninstalled, open your web browser and navigate to: https://get.adobe.com/flashplayer 3. Walk through the steps on that web page to get the right version of Flash Player installed Once you have the normal version of Flash installed, you will no longer see these error messages. If you continue to have problems, please email me at [email protected] and we can do a quick desktop sharing session so I can help you out. Thanks,Chris If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7503430#7503430 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7503430#7503430 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Using Flash Player by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Why do I keep getting the message; Network error occurred?

Similar Messages

Maybe you are looking for