Why do u use xi adaptor when u use a j2se

hi,
why is a xi adaptor placed when communication is done to j2se ... why is j2se always placed outside the architecture

Hi Bose ,
1.J2SE Adapter Engine is used to connect SAP Exchange Infrastructure (XI) to external systems. It uses the various xi adapters so that  XML and HTTP-based messages can be converted to the specific protocol and format required by such systems.
Depending on the configuration, the adapters can be used to do the following:
a.   Exchange data with external systems using a file interface or an FTP server (file/FTP adapter)
b.  Communicate with messaging systems using the JMS API (JMS adapter)
c.  Access databases using JDBC (JDBC adapter)
d. Communicate with clients and providers of Web Services using SOAP (SOAP adapter)
2.The Plain J2SE Adapter Engine is only supported for compatibility reasons. It hosts only a subset of the adapter functionality and has fewer security features. You should only use the Plain J2SE Adapter Engine if it is a precondition in your environment.       
                     J2SE Adapter engine is kept outside because the connection data is kept locally. The adapters of the Plain J2SE Adapter Engine are configured locally and not in the Integration Directory. Exchanged messages are also stored directly in the file system. Therefore, ensure that only the operating system user, who has started and therefore owns the adapter engine process, can read the property files and has access to the directories used for message exchange.
The Plain J2SE Adapter Engine has a separate user and password management, which is not integrated into the overall SAP NetWeaver user administration..All configuration data for the Plain J2SE Adapter Engine is maintained in flat property files.
The file for the engine administration data itself is located in the following directory:
<installation directory>/tech_adapter/BaseConfiguration
The file for the adapter configuration data is located in the following directory:
<installation directory>/tech_adapter/Configuration
*Pls: Reward points if helpful*
Regards,
Jyoti
Edited by: Jyoti Acharya on Jan 4, 2008 2:42 PM

Similar Messages

  • Why do I use my ipod as a camera when I lose precious photos even when I try to back up before an update! Selling my ipod at the first chance I get

    Why do I use my Ipod tiuch as a camera when lose precious photos of my granddaughter every time there is an operating system update? Even when I try to back up the ipod, I can't find the pics etc on my pc. It is very annoying and I am seriously considering selling my ipod because of this. No warning is given that photos will be lost. So very disappointed in aple, lost all my music last time, as well as my pics.

    Yes, using the windows photo capture application is how you get photos taken with the iPod onto your pc. You should store them there, and organize them in folders.
    Create one main photo folder. Inside that folder create additional folders to hold photos. Each folder will become an album on an iPod, iPad, or iPhone. Do not next any other folders inside the first album folder.
    Then start iTunes on your pc and connect your iPod. Select your iPod in itunes and select the Photos tab that will be ps enter. You will most likely have first find your main photos folder. Ten select to sync all photos from your pc or select only those albums you want to have on your iPod. The click on Apply or Sync. That will copy the photos to your iPod.
    If you should do something later to cause these albums to disappear from your iPod you can quickly copy them back by doing another sync.

  • TS1702 "The feature you are trying to use is on a network resource that is unabailable" Why am I getting this message when I try to updaate itunes or quicktime?

    The feature you are trying to use is on a network resource that is unabailable" Why am I getting this message when I try to updaate itunes or quicktime?

    Before trying the update again, use Microsoft's Fix it solution at http://support.microsoft.com/mats/Program_Install_and_Uninstall. Use it to uninstall iTunes and Quicktime. It bypasses this not uncommon problem. When the solution finishes, the selected program will be uninstalled. It can take several minutes and I have seen as much as half an hour.
    After iTunes & Quicktime are uninstalled, try the update again.

  • Why Dynamic Parameter is not working, when i create report using stored procedure ?

    Post Author: Shashi Kant
    CA Forum: General
    Hi all
    Why Dynamic Parameter is not working, when i create report XI using stored procedure ?
    Only i shaw those parameters which i used in my stored procedure, the parameter which i create dynamic using stored procedure
    is not shown to me when i referesh the report for viewing the results.
    I have used the same procedure which i mention below but can not seen the last screen which is shown in this .
    ============================================================================================
    1. Select View > Field Explorer2. Right-click on Parameter Fields and select New from the right-click menu.3. Enter u201CCustomer Nameu201D as the name for your parameter4. Under u201CList of Valuesu201D select u201CDynamicu201D5. Under the Value column, click where is says u201Cclick here to add itemu201D and select Customer Name from the drop-down list. The dialog shown now look like the one shown below in Figure 1. Click OK to return to your report design.
    Dynamic Parameter Setup6. Next, select Report > Select Expert, select the Customer Name field and click OK.7. Using the drop-down list beside select u201CIs Equal Tou201D and using the drop-down list, select your parameter field (it should be the first field). 8. Click OK to return to your report design and see the parameter dialog.The parameter dialog will appear and show you a dynamic list of values that is updated each time your run your report. It couldnu2019t be easier! In our next tutorial, we will be looking at how to use this feature to create cascading parameter fields, where the values are filtered by the preceding selection.
    Dynamic Parameters in Action
    My question is that whether dynamic parameter is working with storedprocedure or not.
    When i added one table and try to fetch records using dyanmic prameters. after that i am not be able to find the dynamic parameter option when i referesh my report.
    One more thing when i try the static parameter for my report, the option i see when i referesh the screen.
    Please reply soon , it's urgent
    Regards
    shashi kant

    Hi Kishore,
    I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
    expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
    =lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
    As to the second issue, please try to use the following expression:
    =Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
    Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl  file with all the size properties to us by the following E-mail address?  It is benefit for us to do further analysis.
    E-mail: [email protected]
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Why do I get this error when trying to use my bluetooth headset as a listening device? There was an error connecting to your audio device. Make sure it is turned on and in range. The audio portion of the program you were using may have to be restarted.

    Why do I get this error when trying to use my bluetooth headset as a listening device? There was an error connecting to your audio device. Make sure it is turned on and in range. The audio portion of the program you were using may have to be restarted.

    I may have already resolved this issue buy removing the device from my computer and re-pairing it. It is currently working just fine.

  • Why does my macbook shut down when I am watching a film using airplay on apple TV?

    why does my macbook shut down when I am watching a film using airplay on apple TV?

    It appears to shut down and all the open programmes are closed

  • Why is the word count different when I use word count from the tools menu to the number at the bottom of my mac word document

    Why is the word count different when I use word count from the tools menu to the number at the bottom of my mac word document

    This forum is for Apple's defunct office suite 'AppleWorks' - since the word count is not in the places you mention I assume you are talking about Microsoft Word? Though it's just possible someone in this forum might also use Word and know the answer, you would stand a higher chance of getting an answer in Microsoft's own forums. You could also try asking in the forum applicable to your operating system - Lion, Mavericks or whatever - on the reasonably chance of finding someone familiar with Word.

  • Why does "Link Media" behave differently when used as a keyboard shortcut vs when right clicked???

    Not sure whether anyone else is encountering this, but the "Link Media" command behaves differently when right clicked as opposed to when used as a keyboard shortcut.
    When you right click to select that option for an offline file, you get only the corresponding disconnected source media. But when you execute "Link Media" via a keyboard shortcut, PP brings up a huge list of all other offline media. Why does it only do that when you use the keyboard shortcut for "Link Media" but not when you right click "Link Media".
    I'd like to get the Link Media command to behave via the keyboard shortcut the same way it behaves when right clicked. I don't want to have to deal with relinking a hundred other files, but just the single offline file I'm working on.

    Among the alternatives not mentioned... Using a TiVo DVR, rather than the X1; a Roamio Plus or Pro would solve both the concern over the quality of the DVR, as well as providing the MoCA bridge capability the poster so desperately wanted the X1 DVR to provide. (Although the TiVo's support only MoCA 1.1.) Just get a third-party MoCA adapter for the distant location. Why the hang-up on having a device provided by Comcast? This seems especially ironic given the opinions expressed regarding payments over time to Comcast. If a MoCA 2.0 bridge was the requirement, they don't exist outside providers. So couldn't the poster have simply requested a replacement XB3 from the local office and configured it down to only providing MoCA bridging -- and perhaps as a wireless access point? Comcast would bill him the monthly rate for the extra device, but such is the state of MoCA 2.0. Much of the OP sounds like frustration over devices providing capabilities the poster *thinks* they should have.

  • Why i dont get email notifications when someone uses my apple account to know my location through Find my Iphone?

    Why i dont get email notifications when someone uses my apple account to know my location through Find my Iphone?

    Try adding [email protected] as a VIP contact in your icloud mail app using the appleid used for icloud if using multiple accounts (i.e different itunes and icloud account).
    But seriously that happens really !? not getting emails for using icloud services with a valid appleid.

  • When phone not muted, why isn't there any audio when using facetime?

    When phone not muted, why isn't there any audio when using facetime?

    What version of iMovie?
    What camera?

  • Why we are using SID in DSO when there we are using star schema in BI

    can anyone answer me why we are using SID in DSO also, i mean what is the need of SID in DSO?

    The reason basically is that the entire query api in BW is based on SIDs
    If you look at a sql of a query that is generated when you run a report you can see this
    Example..
    If you put a selection of period = 02.2009
    In the SQL you will not see "where period = 02.2009" you will see "where sid.period = '000100001010" or something like that
    The whole query  is like this for Infoproviders of DSOs and Infocubes
    Yes it is annoying - but that't  the way it is..
    So if you have a DSO you wish to report on you need the SID for the SQL to fire..!
    On an operational daya to day side - if my cubes are 1:1 granularity with my DSOs then I prefer to put SID activation on the DSOs - two reasons
    1. so the cube load is quicker because the SID generation has already taken place (is this important? never sure but I always do it)
    2. future use of the DSO as a reporting object (this was before the days of the operational store as part of a LSA structure)

  • Why does safari display empty page when localhost service are requested using https?

    Why does safari display empty page when localhost service are requested using https and port 37542 (https://localhost:37542/), but displays page properly when regular port is used (https://localhost/).
    Both links return the same json response and work properly in other browsers. Certificate for localhost service was installed to the storage.

    Problem solved.
    I added headers for localhost service response and page displayed normally.

  • Why do I get bright colors when using the smudge tool?

    Why do I get bright colors when using the smudge tool?

    Thank you!!!
    *Caryl  *
                               (my flickr page ↓)
    *https://www.flickr.com/photos/feathersarenice/
    <https://www.flickr.com/photos/feathersarenice/>*
    We were all born mad. Some remain so.
    "Reality is whatever refuses to go away after I stop believing in it."
    Philip K. Dick

  • HT1937 why i cant use my credit card when im purchasing in clash of clan of gems always say your purchase could not be completed etc etc

    why i cant use my credit card when im purchasing in clash of clan of gems always say your purchase could not be completed etc etc

    No one here can help you.
    Go here:
    https://getsupport.apple.com/GetproductgroupList.action
    ask for assistance.

  • Why my old emails show up when I use the spotlight search?

    why my deleted emails show up when I use the Spotlight search?

    Hi ..
    Try a reset.
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    No data is lost due to a reset.

  • Why does my contacts unexpectly quit when I open it on my IMAC 21.5 (mid 2010).  Using 10.8.3

    Why does my contacts unexpectly quit when I open it.  I am using OS X 10.8.3....  This has been happening for the past two weeks.....

    Try moving the com.apple.addressBook.plist to your Desktop and start Contacts.
    To get there, hold down the Option key and select Library from the Go menu in Finder. Then, navigate to Preferences folder.

Maybe you are looking for