Why header value not in Item table

hi sapgurus
why the value of VBAK-VBELN not present in its item table VBAP-VBELN.plz give reason.
thankx in advance..

HI Rakesh,
If u r talking about the whole record in VBAP then it is possible. But if it is only with the field VBELN then ideally its not possible. But some one has modified VBAP table data from SE16N transaction.
When we create an order VBAK and VBAP tables will be filled with header and item details. But later
If u delete all the line items from the order then in ur VBAP table there won't be any entries for that VBELN while ur VBAK still have an entry. Just open that order in VA03 and see if it has any line items. I hope there won't be any.
If u need still more clarity then create an order and check the tables. Later delete all the line items from the order and check the atbles again.
Thanks,
Vinod.

Similar Messages

How to change the Destination URI value of a item table at run time

I'd like to change the Destination URI of item of a table region when a column X of my view is not NULL. Where should I set the new Destination URI value for the item table region for specific row? Is in the RowImpl for the view object or in the Controler of the page?
I'd really appreciate any suggestion.
Thanks in advance.

Hi,
Thanks for the help, but I still dont know where I should to use setAttributeValue(DESTINATION_ATTR,OADataBoundValueViewObject());
All examples that I saw till now here, suggestes to change something in the page in Controller but based on something entered in the page. In my case is IN to OUT, I will render some item table with a specific value parameter based what is in the database. Being more specific, I have a html table and one column Col1 has a value and it will have a DESTINATION URL if another column Col2 is Null. I believe I would have to check somewhere if the Col2 is null or not and change the DESTINATION URL property.
Thanks again..

Dashboard Prompt using values not from the table

Hi,
I have a requirement from the client to design a dashboard report like the following.
Dashboard prompt will have 4 filters, three filters come from the table, but the fourth filter will have 3 values not from the table. The fourth filter will have values like "Report with Sales Amount", "Report with Purchase Amount", "Report with both Purchase and Sales". I have three different Table reports designed for each of the fourth filter choices. But how do I implement it, both in the dashboard prompt as well as navigating to the rite report based on the selection.
Is my approach correct.
Thanks for your time and help.

The fourth prompt where you have "Report with Sales Amount", "Report with Purchase Amount", "Report with both Purchase and Sales" you pull a dummy column into the prompt and write a sql in show.
would be something like
SELECT Case when 1=0 then "Dimension- Customer"."Cust Name" else 'Report with Sales Amount' end FROM Sales UNION SELECT Case when 1=0 then "Dimension- Customer"."Cust Name" else 'Report with Purchase Amount' end FROM Sales
and in the prompt set a presentation variable say var_criteria
Now create report2 for with a some randomn column and another column will have the values that you want to display for example 'Report with Sales Amount'
Create a filter on the 2nd column and reference the presentation variable var_criteria and default it to 'Report with Sales Amount'
On the dashboard page in the section place the report and enable guided navigatoin by selecting report 2.
Please let me know if you have any questions.
thanks,
deep

Why can I not move items within a playlist?

why can I not move items within a playlist?
I should be able to drag songs up and down - and I can in other lists - but not on a new one I just created. ??

Brandcast, I'd suggest you post in a new topic. Although your question is the same, apparently the answer isn't. Any topic that was originally started over 2 months ago may relate to a different version of iTunes (neither you nor the original poster say which version you use) and who knows what may happen between versions.
Message was edited by: Limnos - user has started a new topic

HT201303 Why I can not purchase item in the game,always let me contact apple story support.

Why I can not purchase item in the game,always let me contact apple story support.

You will need to contact iTunes support to find out why, it could be due to a number of reasons (these are user-to-user forums so nobody on here will know) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Why does IBA not include the table of contents when exporting to PDF?

Why does IBA not include the table of contents when exporting in PDF? I can seee the TOC in iBooks Author but when I want to see what it looks like in a regular PDF, the TOC does not show up.

Strange question you ask here. Not sure why that is relevant to "why" IBA won't publish a table of contents in a PDF.
But since eyou asked, it's simple, I want to author some books in IBA and also see what they look like - completed - in PDF. Again, any suggestions as to a work around so I don't have to cut and paste back into Pages?

Sale Order Header Value not flowing

user created sales order, in item level price displayed correctly, in hedder level it"s choosing 0 can any one give a solution why hedder level thats choose zero
Edited by: Lakshmipathi on Apr 21, 2011 3:21 PM
Please use the subject effectively

Hi,
A lot depends on your pricing procedure. I could think about the following potential reasons:
1) You have price at item, but then later on you give 100% discount so as a result value of the item is 0.
2) your condition type in the pricing procedure is marked as statistical. That is why it does not count for the value of the document.
3) You might have some formulas which deactivate conditions.
but there might be also other reasons.
Have a look at your pricing procedure in V/08 transaction.
Best regards
W.Prawecki

Setting custom table attribute set value in region item table

Dear all
I am working on oracle application customization and extension in
oracle JDeveloper R12. I am finding a difficulty in an query region of
a OA framework page
My Entity object is on the table FWK_TBX_ADDRESS table
and VO objects has the fields or columns
AddressName, AddreessId, TownC-OrCity
what I am doing shown in the following steps
1-I select region using wizard option
2-select my AM and VO
3-select table as style
4-shuttle all attributes associated with VO
5-in region items table , select the Attribute set field for AddressName attribute and click the serach flashligh icon
6-After that select the browse button , using the package browser , expand down to oracle > apps > fnd> framwork > toolbox > attributesets, then oK
7-select the serach control , and then it list all the attributes set related to fwkTbxEmployees table like the following
/oracle/apps/fnd/framewok/toolbox/attributesset/FwkTbxAddress/AddressName
Now the problem which I am facing now is that if I have custom table suppose "xxEmployees" and have attributes or column
for example employeeId, employee_name, email etc. what would I do to search these attributes when I come to step number 6 which
I mentioned above. from where in which package I can find these attributes to set attributesset value. in above i find these attributes
in /oracle/apps/fnd/framewok/toolbox/attributesset/FwkTbxAddress/AddressName
but in my case for attribute lie employeeId or employee_name from where I can get this how can I set the value of attribute set field in regin item
table in step 5
Noman

I dont know what u trying to ask
My problem is just that I want to set the attribute set value of my attribute employee_name, same is AddressId in fwk_tbx_address
ame is AddressId in fwk_tbx_address found on
/oracle/apps/fnd/framewok/toolbox/attributesset/FwkTbxAddress/AddressName
where can I find my attribute employee_name
in jdeveloper

Excise values not updated BSAS Table

Excise Gate Pass when reversed thr T. code J1IH, The reversed entry is generated but it is not linked with original entry and are not moving to table BSAS. Instead when invoice is reversed thr VF11, further entry is generated and original and new entries are reflected ion BSAS
Thanks
Mahesh

Hi Umesh,
How did you change the characteristic values for what object?
For example, if you are changing the material master which has class type 300 class assigned, then you have to use engineering change management to change the classification data, and you need to ensure you have activated ECM for Class Type 300 and object MARA in O1CL:
1.O1CL ->
      Object Table -> MARA
         Class Type -> 300
                       Details
                          ECH(times) (untick -> tick)
2.Click the save icon to save settings
3.O1CL -> Objects ->
          Class Type:300,Object:MARA
                       Details
                          ECH(times) (untick -> tick)
4.Save settings.
Then after you change the material classification with change number, you will find the change document for the classification in classification view: menu Environment -> change docs.
The values and changes are also stored in table AUSP with the change number, but only when you use change number, the changes could be stored also.
Regards,
Rachel

Why can I not see a table I own inside a procedure

I have a procedure owned by user X as follows:
create or replace procedure ztm_get_debug_level is
vc_pkg_name system_parameter.name%TYPE := 'DEBUG_LEVEL_PKG_BASE_KEYS';
vn_error     services.debug_log_level.debug_level_id%TYPE := 30;
v_debugLevel   system_parameter.number_value%TYPE;
function get_owner return varchar2 is
    cursor c1 is
    select owner from all_tables where table_name = 'SYSTEM_PARAMETER';
    v_Ret_Val VARCHAR2(30);
BEGIN
    OPEN C1;
    FETCH C1 INTO v_Ret_Val;
    CLOSE C1;
    RETURN v_Ret_Val;
END;
begin
DBMS_OUTPUT.PUT_LINE('AAAA - ' || get_owner);
select s.number_value
into   v_debugLevel
from   system_parameter s
where s.name = vc_pkg_name;
DBMS_OUTPUT.PUT_LINE('BBBB');
exception
when no_data_found then
    NULL;
when others then
   DBMS_OUTPUT.PUT_LINE('p_get_debug_level.WHEN OTHERS');
   raise;
end;
Table system_parameter is owned by user X.
When I execute I get:
TESTSSG.SUBSCRIPTION.87> exec ztm_get_debug_level
AAAA - X
p_get_debug_level.WHEN OTHERS
BEGIN ztm_get_debug_level; END;
ERROR at line 1:
ORA-00942: table or view does not exist
ORA-06512: at "SUBSCRIPTION.ZTM_GET_DEBUG_LEVEL", line 32
ORA-06512: at line 1
When I run the query outside the procedure as user X I get a row.
Any ideas?
FYI, there are no public sysnonyms.
DB version: 11.2.0.3.0
Thanks,
Thomas

Thanks Frank,
SYSTEM_PARAMETER is a table owned by X. If I qualify the select statement by adding the owner it works, but of course I do not want to do that. Here is the DDL for creating SYSTEM_PARAMETER:
create table SYSTEM_PARAMETER
name         VARCHAR2(256) not null,
date_value   DATE,
number_value NUMBER,
string_value VARCHAR2(512),
comments     VARCHAR2(512)
alter table SYSTEM_PARAMETER add constraint PK_SYSTEM_PARAMETER primary key (NAME);
Again, if I rewrite the procedure to the following (only difference is the red X.), it works:
create or replace procedure ztm_get_debug_level is
vc_pkg_name system_parameter.name%TYPE := 'DEBUG_LEVEL_PKG_BASE_KEYS';
vn_error     services.debug_log_level.debug_level_id%TYPE := 30;
v_debugLevel   system_parameter.number_value%TYPE;
function get_owner return varchar2 is
    cursor c1 is
    select owner from all_tables where table_name = 'SYSTEM_PARAMETER';
    v_Ret_Val VARCHAR2(30);
BEGIN
    OPEN C1;
    FETCH C1 INTO v_Ret_Val;
    CLOSE C1;
    RETURN v_Ret_Val;
END;
begin
DBMS_OUTPUT.PUT_LINE('AAAA - ' || get_owner);
select s.number_value
into   v_debugLevel
from   X.system_parameter s
where s.name = vc_pkg_name;
DBMS_OUTPUT.PUT_LINE('BBBB');
exception
when no_data_found then
    NULL;
when others then
   DBMS_OUTPUT.PUT_LINE('p_get_debug_level.WHEN OTHERS');
   raise;
end;
This procedure exists in 4 other environments where there are no issues. It can't be a privileges issue as the table is owned by user X and as you can see by the lookup (which was added for debug) against ALL_TABLES the owner is clearly X. So, why can X not select from it's own table unless we include the owner?
Thanks,
Thomas

Why DDL during SELECT is possible. Or why SELECT does not put a table lock?

This is a question to people who really knows Oracle internals or/and RDB theory.
(The question is relocated from another thread for not hijacking on that's original question.)
Why DDL during SELECT is possible? Or why SELECT does not put TM 2 Row Shared lock on table(s)?
This not locking causes a possibility while one session is running a long select, another can truncate and even drop table(s) that are being read by the first session.
I think, humbly assume, that Oracle does not put TM 2 lock on tables, that are being simply SELECTed, by some significant technical reason. But I do not know this reason. If somebody knows please shed a light.
Also, if you know that this behavior is totally correct from perspective of RDB theory, please explain me.
I'll try to explain my point.
It is a matter of data consistency and integrity that is supported in Oracle everywhere except this place.
a) If one session is reading data from moment T and other session changes data on its way at moment T1, the first session wont read that changed data, it will read the data that was there on moment T.
This is declared as Read Consistency principle.
b) If one session is changing data, and another session tries to truncate or drop table - the second session will fail with error ORA-00054: resource busy and acquire with NOWAIT specified.
This is declared as Data Integrity principle.
c) But why not to follow the above principles in case when one session reads data and another session tries to truncate or drop table (or do other DDL operations)?
It is counter-intuitive. Why not to put TM 2 (SS) lock during SELECT execution that would prevent DDLs on this table?
What I only can assume is that this is only because some technical difficulty or limitation.
What is this limitation or other reason in favor of which Oracle sacrificed consistency in this case?

user11181920 wrote:
Aman,
There was no need to clarify how DML lock works, I know that.
Also I know that in Oracle a Select does not lock neither table rows nor table itself.
The reason I mentioned it because you brought up the word change which is far better suited for DML's than DDL's as the former has a requirement to have its Undo preserved.
Again, my question was why Select does not protect itself by locking table(s), partitions and indexes?Protect from what? There is nothing wrong with doing a select. What would happen with a select doing a lock on the table before being executed in its entirety (forget DDL and DML altogether for a moment) ? State one good reason that there should be a lock for the select. If it has to, it would be always isn't it?
The keyword here is concurrency and that's what is the best when the number of locks obtained are lesser at non-required operations. A select doesn't change anything that's why in Oracle, there is no read-level lock.I am not saying about row locks while reading. They are not needed because Undo resolves concurrency.Only in the case of DML where the change is still active and the buffers are dirty. With a DDL, its an implicit commit.
I am asking why Select does not enqueue one, only one lock per object that participates in the Select?Again, my question back to you is, what good you would get from it? What purpose it would solve?
It is not very expensive, I suppose. But it would protect from DDLs that can destroy the Select's result set. You have seen in your system and in my demo(and that's what the the question was on the other thread also) that the result remains intact and its not a behavior from now. Its the same since the time I have started learning Oracle. Can you explain that why you think that the result of select statement would be wrong for a drop table? I believe, its been stated repeatedly that if the select has no requirement to look back the table, it would get completed. Only if the select needs to access the table again, it would fail. So even if we consider your explanation, there is no wrong result shown at all. Once the session encounters that the table is dropped for the statement, the execution stops right away. So where is the destroyed result?
Yes, it is less dangerous when Select does not lock table comparing with what would happen with DMLs in such case (that is why DMLs protect themselves by TM 3), it affects only the Select and its consumer, but still ... I don't understand this Oracle's decision. What is a reasoning behind it?.As I said, to improve concurrency.
Aman....

PO number prints only if it is at header level not for item level

Hi All,
I am not able to print the PO number in my order acknowledgement and COA printout when I enter the PO number in the sales order at item level of only. It prints fine when it is at the header level.
Please assist.
Thank you,
Shanu Jain

Hi,
BSTKD Field in the VBKD is dependent on two things . IF the Header PO Number is same as the Item number if u change at Header level it will be changed at all items level also. If both are diff then if u change the PO Number at Header level it will change PO numbers of the Items which is having same value as Header Po Number otherwise it wont change the Item PO Number .
Ex " Order Number 1000 is having PO Number at Header Level is PO1. And the sales order is having Item 010 and 020.
IF Item 010 and 020 is having PO1 at item level if u change the value of PO1 at header Level if will be applicable to items 010 and 020.
If Item 010 is having Po Number PO1 and 020 is having PO2, if i change value of PO number at header to PO3 then it will change Item 010 PO Number to PO3 and Item 020 PO Number will be same as PO2.
Try to Take The VBKD - BSTKD where Item Number POSNR is blank that means Header PO Number .
IF u want Item Po Number then pass the item number in POSNR and get it.
Regards,
Srinivas.

Formula column value not updating in table?

Hi all,
I create the sample for master/detail form. In detail for prdcode,rate,qty,amount is there. When select prdcode it fetching prdcode,rate in a record and if you type the qty the amout will come based on formula(property) :qty*:rate.
It is available on screen. But when i store the data, in backend table the amount is be a null.
What is the problem.
Help me in this regards,
kanish

Hi kanish
Regarding Nul...
-u have to make sure that the formula is working fine and displaying the result in the form screen
-then the item u r storing MUST be a db item >yes and has a column name
-first of all select Help > display_error in the forms runtime may a db item error arais and the record is not correctly saved as u imagined.
u have 2 choices for the solution , i had both before may be it's not very cute but it will work...
1. In when-validate-item Trigger or related item triggers pls follow
SELECT Nvl(( :qty*:rate ) ,0)
INTO :UR_ITEM
FROM DUAL;2.In Pre-Update,Pre-Insert & Pre-Delete Triggers Pls assign the result of ur formula column to the item u want to calc as supposing u r doing the calc of formula in non-db item , then put the following in triggers mentioned ...
: item_name :=:qty*:rate;Hope this helps...
Regards,
Amatu Allah.

IR column Header value not displayed entirely during filteration

I have a IR, when I click any column Header and it shows the list of values as a dropdown.
some of them (which are larger) get cut off.. means the the entire content/value are not displayed within the dropdown. [width of dropdown is fixed and no of characters in the content/value is more..]
how can we fix this?
Also.. is there any we can increase the width of the Select List window when we click any column header in IR.
Thanks,
Deepak
Edited by: DeepakJ on Sep 15, 2011 4:08 PM

Hi,
jQuery is not included to Apex 3.2 by default.
If you have not include jQuery library's to e.g. your page template or page header, then it is not "installed".
You can run your app and inspect HTML source to be sure.
You can download jQuery and jQuery UI and place files to your HTTP server folder. Then load those in e.g. page template header.
Or use jQuery files from Google by placing to page template header.
<link type="text/css" rel="stylesheet" href="//ajax.googleapis.com/ajax/libs/jqueryui/1.8.16/themes/redmond/jquery-ui.css" />
<script type="text/javascript" src="//ajax.googleapis.com/ajax/libs/jquery/1.6.4/jquery.min.js"></script>
<script type="text/javascript" src="//ajax.googleapis.com/ajax/libs/jqueryui/1.8.16/jquery-ui.min.js"></script>Regards,
Jari

When i change the value of a combo box using a property node it displays the value not the item label

I am using a combo box as a select list for text serial commands. I have items like "engineering", "GUI", and "Scan" for the commands "MDE", "MDN", and MDS respectively which i have input as the corresponding value in the combo box. so for example the label "engineering" has the value "MDE" in the combo box items list. when the Vi starts it needs to read the current value MDE, MDN, or MDS and then i want it to display on the front panel the item text corresponding to that command value.
To do this i have tried to read the serial command, ie MDS and then wire that to a "value" property of a property node of the combo-box, but instead of displaying the corresponding item label, "Scan", it displays the value "MDS" on the front panel instead. i want the front panel to use the label text when choosing and displaying but the block diagram to use the serial commands. Can this be done with a combo box? I'm trying to use a combo box so i can keep it all text and avoid having to build a case statement to convert enums or rings from a numerical value to the text command.
The correct text value is wired to the value property and it does exist in the combo-box. I have unchecked "values match items" and selected to not allow undefined values.

Don't use the value property node. Use the Text.Text property node. When creating the property node, select Text, then in the next pop-up box, select Text.
- tbob
Inventor of the WORM Global

Why header value not in Item table

Similar Messages

Maybe you are looking for