Why is my event update not working?
I have this code:
function changeAlpha(evt:Event){ if(this.hitTestObject(MovieClip(this.parent).bauble_mc)){ this.alpha=0; } evt.updateAfterEvent(); }
But I'm getting
1061: Call to a possibly undefined method updateAfterEvent through a reference with static type flash.events:Event.
because I didn't display it to be a TimerEvent as the functions parameter.
I'm still stuck though.
Does the number you put in to declare a new timer still mean the amount of milliseconds between timer events? Because I've put like 50 in and it's going sooo slow. Wonder if CS4 had changed or something?
Similar Messages
-
Why does 'check for updates' not work?
Just curious why the updates do not work? Is it just easier to download the release2?
Check for updates is intended for use after production when we might have small changes to 1-2 files. Our current releases have many changes to many files and might almost be as large as the download. Also, we are still making structural changes to the storage of the code (shifting around preferences, etc). For the Early Adopter Releases, we really want people to download and install in a clean directory. After production, we will support check for update.
-- Sharon -
Why does restoring and updating not work?
Hi. I'm trying to restore my iPod Touch through iTunes because it has a lot of "other data" on it, 3.1GB to be exact. I've read in a lot of places including here on this site that what is needed is a restore. Well, I've been trying to do that ever since July 2012 but the restore never completes. I've redownloaded iTunes a couple of times, everything is where it should be, and I have a really strong internet connection. The weird thing is that after a while restoring, I click on the status bar in the "Downloads" section of iTunes and it shows how much data is going, such as 1MB per minute or something along those lines, but then the data starts to drop until all is left is a really slow 100 something kbsp and it is at this time that the restore stops and a message pops up saying to check my internet but I have a really good internet connection and everthing is good. I do everything such as redownload iTunes and restart the computer and I have a DELL computer that is 2010 or 2011 running on Windows 7. Can anyone help me with this please?
Also, I try to update on iTunes but that also quits. I know I can update on my iPod but iTunes on my computer will always ask to update it before restoring even though I've updated. This was the case when iOS 6 was barely out. It kept on saying to update first and so I let it but then it doesn't do it and I can never restore.Do you mean that when you move files on the Desktop, they don't stay where you put them ?.
If so - use Finder - View menu - Show View options & choose 'Arrange by' : none
If not - please describe exactly what the problem is. -
Why does the software updating not work
My system refuses to perform a software update. It starts to scan, then only displays a very short blue section on the progress display and then finally quits by refereing to an apparent network problem. However, network checks show that everything is OK.
Any ideas what it couod be or how to overcome the problem?
At the same time, also Safari plays up. When changing websites, in many cases they either don't open or it takes a very long time to start opening. When I disconnect from WLAN and then reconnect, the pages start to load.Many thanks.
Itunes can not update due to an Invalid signature
That one suggests the installer is getting damaged during the download via Apple Software Update.
Try instead updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/ -
I have thee Mac computers with Mac OS 10.6.8, one of which is a Mac Pro. No matter how many updates I install from Adobe, their Flash Player does not work on any of these 3 computers. I don't know how to contact Adobe Systems about this problem, but I think it is their responsibility to make sure that their so-called "universal" software works proplerly on a relatively recent operating system like OS 10.6.8 that is still in widespread use. When you install the updates, nothing happens -- not even an error message. What is the point of a universal player that is not universal? It works fine on my MacBook Pro with OS 9 Mavericks, but it does not work at all -- indeed, has never worked -- on my 3 Macs with OS 10.6.8. Has anyone contacted Adobe Systems to find out why the Flash Player does not work with OS 10.6.8 and what they plan to do about it?
Where are you getting Flash from?
Get the appropriate dmg installer here and then run it.
http://www.adobe.com/products/flashplayer/distribution3.html
If it still won't install, do these two things: First uninstall any Flash by going into the second level Hard Drive Library>Internet Plug-ins, and trash the Flash Player.plugin and flashplayer.xpt. Then boot into Safe Boot, Shift at the startup chime (give it much longer than a usual boot) and run the installer while booted in Safe Boot. -
Why is my updater not working?
Why is my updater not working. I receive the following error message " no internet connection please check your internet settings and or firewall waiting for connection" I have checked my internet connection and it is in fact connected. What can I do?
Download and save the full Firefox installer to the desktop and start the installation with a double-click on the desktop icon.
You can find the full version of the current Firefox 27.0.1 release in all languages and for all Operating Systems here:
*http://www.mozilla.org/en-US/firefox/all.html -
I already update my os to ios7 but the panorama wallpaper is not working, i try to use before the ios7 beta, the panorama is working. Why in this ios7 is not working. Could anyone help me????? Thanks
That's odd.
Try this: Unplug your Time Capsule and your router. On your MBP, click the Wi-Fi icon and select "Open Network Preferences".
Click the lock icon to authenticate, then click the "gear" and select "set service order". Wherever AirPort (or Wi-Fi - I forget what Snow Leopard calls it) appears, drag it elsewhere in the list. Click OK, then Apply, then power up your router and TC.
If that doesn't result in any change, repeat the above but try making the service(s) you do not need "inactive".
The purpose of this is to reset or at least change your Network Preferences, which somehow got confused upon upgrading to SL. -
TableView updates not working when ValueFactory returns a new Binding
Hi,
When a cell value factory returns a newly created expression or Binding cell values will stop receiving updates at some point. It seems that the cell that requests the observable value from the value factory does not keep a strong reference to the returned value so the cell will only receive updates from the the Observable value as long as it has not been garbage collected. The code below reproduces this issue:
import javafx.application.Application;
import javafx.beans.property.DoubleProperty;
import javafx.beans.property.ReadOnlyStringWrapper;
import javafx.beans.property.SimpleDoubleProperty;
import javafx.beans.value.ObservableValue;
import javafx.event.ActionEvent;
import javafx.event.EventHandler;
import javafx.scene.Scene;
import javafx.scene.control.Button;
import javafx.scene.control.TableColumn;
import javafx.scene.control.TableColumn.CellDataFeatures;
import javafx.scene.control.TableView;
import javafx.scene.layout.HBox;
import javafx.scene.layout.HBoxBuilder;
import javafx.scene.layout.StackPane;
import javafx.scene.layout.VBox;
import javafx.scene.layout.VBoxBuilder;
import javafx.stage.Stage;
import javafx.util.Callback;
* Reproduce cell update bug. Compile and run the class. Press the update button a
* couple of times and note how the values in the total column update. Press the
* GC button a couple of times and then press the update button again. Note how
* the values in the total column do not update anymore.
* The Value Factory for the total column does not return a property that is
* held by the Order object, it returns a Binding that is created on the fly.
* The cell does not hold a strong reference to this object so it can be gc'd
public class CellUpdateTest2 extends Application {
static class Order {
String name;
DoubleProperty price = new SimpleDoubleProperty();
DoubleProperty qty = new SimpleDoubleProperty();
Order(String n, double p) {
name = n;
price.set(p);
qty.set(1);
final Order items[] = {
new Order("Item 0", 4.0),
new Order("Item 1", 5.0),
new Order("Item 2", 6.0),
new Order("Item 3", 7.0),
new Order("Item 4", 8.0),
new Order("Item 5", 9.0),
new Order("Item 6", 10.0),
new Order("Item 7", 11.0)
@Override
public void start(final Stage primaryStage) throws Exception {
final Button updateButton = new Button("Update Values");
updateButton.setOnAction(new EventHandler<ActionEvent>() {
@Override
public void handle(final ActionEvent actionEvent) {
for (Order i: items) {
i.qty.set(i.qty.get() + 1);
final Button gcButton = new Button("System.gc()");
gcButton.setOnAction(new EventHandler<ActionEvent>() {
@Override
public void handle(final ActionEvent actionEvent) {
System.gc();
final TableView<Order> tv = new TableView<Order>();
final TableColumn<Order, String> nameCol = new TableColumn<Order, String>("Item");
final TableColumn<Order, Number> priceCol = new TableColumn<Order, Number>("Price");
final TableColumn<Order, Number> qtyCol = new TableColumn<Order, Number>("Quantity");
final TableColumn<Order, Number> totalCol = new TableColumn<Order, Number>("Total");
nameCol.setCellValueFactory(new Callback<TableColumn.CellDataFeatures<Order, String>, ObservableValue<String>>() {
@Override
public ObservableValue<String> call(final CellDataFeatures<Order, String> d) {
return new ReadOnlyStringWrapper(d.getValue().name);
priceCol.setCellValueFactory(new Callback<TableColumn.CellDataFeatures<Order, Number>, ObservableValue<Number>>() {
@Override
public ObservableValue<Number> call(final CellDataFeatures<Order, Number> cellData) {
return cellData.getValue().price;
qtyCol.setCellValueFactory(new Callback<TableColumn.CellDataFeatures<Order, Number>, ObservableValue<Number>>() {
@Override
public ObservableValue<Number> call(final CellDataFeatures<Order, Number> cellData) {
return cellData.getValue().qty;
totalCol.setCellValueFactory(new Callback<TableColumn.CellDataFeatures<Order, Number>, ObservableValue<Number>>() {
@Override
public ObservableValue<Number> call(final CellDataFeatures<Order, Number> cellData) {
return cellData.getValue().price.multiply(cellData.getValue().qty);
tv.getColumns().addAll(nameCol, priceCol, qtyCol, totalCol);
tv.setColumnResizePolicy(TableView.CONSTRAINED_RESIZE_POLICY);
tv.getItems().addAll(items);
final HBox hb = HBoxBuilder.create().children(updateButton, gcButton).build();
final VBox vb = VBoxBuilder.create().children(tv, hb).build();
primaryStage.setScene(new Scene(vb));
primaryStage.setHeight(200.0);
primaryStage.show();
public static void main(final String args[]) {
launch(args);
} Is this expected behaviour?
If so - what would the correct way to approach this?
If not - is there an easy workaround?this seems to have worked....
static class Order {
String name;
DoubleProperty price = new SimpleDoubleProperty();
DoubleProperty qty = new SimpleDoubleProperty();
DoubleProperty total = new SimpleDoubleProperty();
Order(String n, double p) {
name = n;
price.set(p);
qty.set(1);
public void updateTotal() {
total.set(price.get() * qty.get());
}with
qtyCol.setCellValueFactory(new Callback<TableColumn.CellDataFeatures<Order, Number>, ObservableValue<Number>>() {
@Override
public ObservableValue<Number> call(final CellDataFeatures<Order, Number> cellData) {
System.out.println("in qty column");
cellData.getValue().updateTotal();
return cellData.getValue().qty;
});and finally
totalCol.setCellValueFactory(new Callback<TableColumn.CellDataFeatures<Order, Number>, ObservableValue<Number>>() {
@Override
public ObservableValue<Number> call(final CellDataFeatures<Order, Number> cellData) {
System.out.println("in total column");
return cellData.getValue().total;
});I cannot explain why what you did did not work. I have a mistrust towards binding and I avoid it when ever possible.
thanks
jose -
Why is my apple id not working in itunes store?
why is my apple id not working in itunes store?
When is it asking for it ?
If you are updating from iOS 7+ to 7.0.4 then did you have Find My iPod enabled on it ? If you did then it might be asking for the password for your account when you set that 'on'. -
Why is the "plug in" not working every time i try to stream?
Why is the "plug in" not working every time i try to stream?
If you own "Sausage Fattner" you'll find a update in your email that solves this problem.
-
Why my wi-fi is not working, and it says bluetooth is not working too??
Why my wi-fi is not working, and it says bluetooth is not working too??
My bluetooth n wi-fi are both unavailable! i had already restore my device, but it still doesn't work!!
My name is juniper, i am from Taiwan! Any know what's wrong with this piece of XXXX!!?? Help me plzzzz!!Hi ,
I am a specialist in Computer and Information Systems e. I am 40 years old from Egypt
I have Iphone 3g 8g and my SN 868391XZY7H
Tunes update killing my Iphone software , 3 days my Iphone not working Although I am go to download 100% update and my iphone installed all a software update but I don’t know what happened why my Iphone not working ?
now some one help me and he installed software for my iphone and it is working but Wi-Fi and Bluetooth not working
I need help me because Tunes update from killing my Iphone ??.
i want my old Iphone software please
thank you somuch
[email protected] -
Wireless OS Update - not working
I've been trying to update my BlackBerry Torch 9800 6.0.0.246 to higher version wirelessly but all it says - “Your BlackBerry is up to date.” The others we're able to update their smartphone but why can't I? I don't want to plug my phone to any computer using the cable connector because I'm afraid it would get virus and be ruined eventually. Please help..
Duplicate:
http://supportforums.blackberry.com/t5/BlackBerry-Torch/wireless-OS-update-not-working/m-p/2039115#n...
Answer provided there. Please avoid poly-posting the exact same issue.
Thanks!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Site list update not working with TED and Zenworks for Servers
Product: Zenworks for Desktops 7Sp1 and Zenworks For Server/TED 7Sp1HP5
Subject: Site list update not working with TED and Zenworks for Servers ,
all on Linux
Description: We have an exiting environment with 6 ZfS Servers and now we
brought up a new Server for another location. I configured all same as on
the other Server and the new one created all NAL-Apps at the new location.
But in the Application Site list on the golden App is this Application
missing. So I clicked on the Link up site list on the Distribution Screen
in C1. On ApplicationSite list the App from the new location is missing.
So I removed all and added the new from the new location and now i see all
in the application site list.When I install an app on the client on the
new location NAL is connecting alway th the same (wrong location-server
and i get an msi error 1612 or id=53272 with path=\Wrong serverpath to
file.
I looked on the other tab on C1 at the golden app an I see the backlinks
are going to all other servers without the new one. Software installation
on other locations are ok
RegardsAndreas,
I forgot to mention that you can also set the loging level on the Distributor and the Subscriber to 6. to do this at the Zenworks Server Management prompt type "setconsolelevel 6" if you want to capture this to the log file ted.log then use "setfilelevel 6"
Next delete the Distribution from the Subscriber and then re-push the channel.
What we are looking for here in the log is the creation of the object and the linking information about the gold object. it should look like this (not the failure part ;-))) )
In this excerpt you will see the entry
Golden App =
This should be were the link is to
You can check this both ways in the Golden App and in the Distributed Application.
Here is a log from me that shows this info as an example of what you should be looking for.
2008.05.29 03:35:41 [TED:Work Order In(yourserver.yes.com)] Receiving distribution: Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_YOURSERVER.BRN.FL.SUBS.SUBSCRIBERS.ZSM. GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
2008.05.29 03:35:41 [TED:Event Processing] Handle Event: Work order IN completed... Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
2008.05.29 03:35:41 [TED:Event Processing] Received (from haverhi-flbrn1.yesbank.com) Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details.. -
Same issue Network Discovery not working and Windows Update not working
I've read the threads.
This is a Vista Ultimate upgrade. My OOOOH My I have clocked 8 hours
Everything was working before. I tried all of the recommended services turning on restarting.
Also, ran into the problem of my memory being eaten. Suspected cause hibernate mode, which I had to disable. Scott Hasselman blog recommended the fix which is a cheap work around that limits machines functionality!!
I'm and IT Engineer specializing in MS product lines since Windows 1.0. MFC foundation classes etc.. What is the real problem ?
I don't have the NetBIOS over tcp/ip in my services?
I figure that the cost of my time and other individuals pays for the OS four times over. Give me a Microsoft developer subscription or something to make me happy. This is my development machine and I'm loosing time and money.
FYI, Just upgraded my second machine to Windows 8.1 OMG !!2 Hours to upgrade after the download. I loose my configuration settings. I required to have a Windows Live whatever account!!! This is not the way to compete and keep customers.
Windows XP has been by far the best deployment experience. I need a Knowledge base that gives solutions , not a troubleshooting scenario that does or does not work!!
Please , don't tell me to go and by a OEM Surface I cannot recommend this to my clients.
Thank YouHi,
If it worked previously, a quick solution is to run System Restore and get back to the previous status when the issue didn’t occur.
What is System Restore?
http://windows.microsoft.com/en-us/windows7/What-is-System-Restore
When you turn on network discovery, do you get any error prompt?
Please check if you have any error message about network discovery in event viewer.
Open Event Viewer
http://windows.microsoft.com/en-US/windows7/Open-Event-Viewer
What information appears in event logs (Event Viewer)?
http://windows.microsoft.com/en-US/windows7/What-information-appears-in-event-logs-Event-Viewer
Please use Windows Live SkyDrive (http://www.skydrive.live.com/) to upload the Error logs to a public folder and share the URLs with us.
Also, please temporarily turn off your firewall and all the security programs for a test.
As far as I know, Network discovery requires that the DNS Client, DNS Client, Network Connections, Network Location Awareness, Remote Procedure Call (RPC), Function Discovery
Resource Publication, TCP/IP Netbios helper, SSDP Discovery, and UPnP Device Host services are started and set to automatic.
You should check again if you have started all these services.
Regarding the update issue, I suggest you try the following suggestions.
1. Temporarily disable firewall and antivirus program to test the issue.
2. Open the Windows Update troubleshooter
http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter
3. Reset Windows Update components
http://support.microsoft.com/kb/971058
You may follow the steps from the link below to fix the issue.
Windows Update Not Working.
http://support.microsoft.com/kb/555989
You may also see the common Windows Updates troubleshooting guide.
Fix Microsoft Windows Update Issues
http://support.microsoft.com/kb/906602
Hope it helps.
Regards,
Blair Deng
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
My IPad cannot download live Tv from skygo. I have no problem with my lap top so I assume the broad band is okay. Can anybody suggest why the live streaming will not work on my iPad .
Are you using the Sky Go app to try and watch it ? If so are you logged in with your Sky account ?
If you are using the app then you could try closing the app completely and see if it works when you re-open it : from the home screen (i.e. not with Sky Go 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Sky Go app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Maybe you are looking for
-
I was trying deleting employee from CRM. First, I run the t-code BUPA_PRE_DA, The system returns message Business Partner has status 'Flaged for Deletion'. Second, I run the t-code BUPA_DEL, the system returns the message No Business Partner Deleted.
-
I was using Firefox for a few years with great enjoyment. Recently I opened it and within a second or so, it enlarged to the point that the top and bottom of the screen expanded off the screen. No other windows in any other program are doing this. Th
-
our local currency is USD, document currency is EUR. I use F-02 to post to GL account 1003011 (bank account) and use exchange rate EUR=1.3 USD. In F-05, I tick create postings and it shows 90 USD in amount posted column, Exchange rate column 1 is 1.
-
Double-sided, two per page printing
Hi, every week I have at least 2-3 7-page documents to print 12 copies of. How do I stop each copy runninig in to each other i.e., the first page of the second document prints out next to the last page of the first document. It's infuriating!! Than
-
Why does my HP6310 not show the "Work Online" option anymore. It only displays work offline.
I have an HP6310 that is wired to a wireless router and now I cannot print. It says the printer is offline and I cannot change it back to online......I do not have that option. Can anyone help!!! THANKS!