Why is my WAR file still referencing data from the old database server?

OK I will outline the steps:
1. I downloaded a perfectly functioning WAR fIle
2. Uncompressed it
3. Changed the database settings in the Database.properties file
4. Made it a WAR file again
5. Imported it in Eclipse IDE using File -> Import
6. Ran a test client by right clicking the WSDL and selecting Web Services->Generate Client
Now when I insert data using the client, it is still entering that on the old server and not the new one. I am so lost in terms of modifying WAR files.

Obviously one or more of the steps you took was not performed correctly but the detail is important and we don't have any.
I would guess that if you extract the content of your modified war file you will find that you did not actually change anything but who knows.

Similar Messages

My Iphone was sync with Itunes on a computer then this computer broke down and i purchased another one. I was able to extract all the data from the old one. now how can i sync my phone with the new tunes without loosing any data?

My Iphone was sync with Itunes on a computer then this computer broke down and i purchased another one. I was able to extract all the data from the old one. now how can i sync my phone with the new tunes without loosing any data?

Yes, windows to Mac too.
iTunes: How to move [or copy] your music [library] to a new computer [or another drive] - http://support.apple.com/kb/HT4527
Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library.
Windows users see tip at: https://discussions.apple.com/message/18879381

How can i save the data from the Oracle database to my local directory

How can i save the data from the Oracle database to my local directory instead Of saving the data file to the Directory created on the Oracle Server ?
I require to design the Procedure which will pull the data from various tables and needs to store the data in the Client's local directory.

Since SQL*PLUS runs on the client, you can use SQL*PLUS to spool data to your local drive.
You could also use the database to write a a specified drive where all users have access to (mapped network drive, e.g.). I wouldn't recommend doing it that way, but it is sometimes useful when the files are created in some nightly batch run.

How configure a primavera web service to return data from the second database?

Hi everyone,
We have P6 with first WS deployed on a single server weblogic domain. The first WS return data from the first database instance.
Then deployed advanced second WS on a separate weblogic domain server with a different port. Configured second WS with <WS2_INSTALL_HOME>/bin/dbconfig.sh, creating a new branch of a configuration that specifies a different second instance of the database. However, this configuration is ignored and second web services return data from the first database.
We have one domain, which including next servers:
Name / Host / Port / Deployments
P6 / localhost / 0001 / P6(v8.3), p6ws1(v8.3)
p6ws2 / localhost / 0002 / p6ws2(v8.3)
Now we have two different file BREBootstrap.xml.
P6 BREBootstrap.xml:
<Database>
<URL>jdbc:oracle:thin:@db1:1521:db1</URL>
<UserName>pubuser</UserName>
<Password>anycriptopass1</Password>
<Driver>oracle.jdbc.OracleDriver</Driver>
<PublicGroupId>1</PublicGroupId>
</Database>
<CfgVersion>8.330</CfgVersion>
<Configurations>
<BRE name="P6 Config_DB1" instances="1" logDir="anydir/P6EPPM/p6/PrimaveraLogs"/>
</Configurations>
p6ws2 BREBootstrap.xml:
<Database>
<URL>jdbc:oracle:thin:@db2:1521:db2</URL>
<UserName>pubuser</UserName>
<Password>anycriptopass2</Password>
<Driver>oracle.jdbc.OracleDriver</Driver>
<PublicGroupId>1</PublicGroupId>
</Database>
<CfgVersion>8.330</CfgVersion>
<Configurations>
<BRE name="P6 Config_DB2" instances="1" logDir="anydir/P6EPPM/ws2/PrimaveraLogs"/>
</Configurations>
‘P6 Config_DB1’ and ‘P6 Config_DB2’ including Database property for 1 and 2 database respectively.
How to configure a second web service to return data from the second database?
Thanks in advance!
Regards,
Dmitry

OK, so I got this to work this morning with Username Token Profile (with little help from Oracle Support).
I followed your steps 1-4 but in step 2 I didn't add the -Ddatabase.instance=2 because I want to check to see if my code could swap between different instances.
It appears for Username Token Profile to use Database Instance, you need to set it in the soap header.
So my soap request looks like this:
<?xml version="1.0" encoding="utf-8"?>
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" xmlns:u="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
    <s:Header>
        <DatabaseInstanceId xmlns="http://xmlns.oracle.com/Primavera/P6/WS/Authentication/V1">2</DatabaseInstanceId>
        <o:Security s:mustUnderstand="1" xmlns:o="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
            <u:Timestamp xmlns:u='http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd' u:Id='uuid-327b6ed1-b26d-4a61-81d5-e326174c1961-3'>
                <u:Created>2014-10-23T04:28:01.152Z</u:Created>
                <u:Expires>2014-10-23T04:29:01.152Z</u:Expires>
            </u:Timestamp>
            <o:UsernameToken u:Id='uuid-327b6ed1-b26d-4a61-81d5-e326174c1961-3' xmlns:u='http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd'>
                <o:Username>admin</o:Username>
                <o:Password Type='http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText'>password</o:Password>
                <o:Nonce EncodingType='http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary'>vJBQhCc28bAeszej7gOaiC2tVCQ=</o:Nonce>
                <u:Created>2014-10-23T04:28:01.152Z</u:Created>
            </o:UsernameToken>
        </o:Security>
    </s:Header>
    <s:Body xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
        <ReadProjects xmlns="http://xmlns.oracle.com/Primavera/P6/WS/Project/V2">
            <Field>ObjectId</Field>
            <Field>Id</Field>
            <Field>Name</Field>
            <Field>Status</Field>
            <Field>StartDate</Field>
            <Field>FinishDate</Field>
            <Field>DataDate</Field>
            <Filter>Id = 'EC00515'</Filter>
        </ReadProjects>
    </s:Body>
</s:Envelope>
This request pulled the project from the second instance.
V/r,
Gene

HT4859 If I got a new iPhone and backed up the data from the old one, it should show up once the new one is set up right? Does an "incomplete" status mean it did not back up and can not be restored to the new iPhone?

If I got a new iPhone and backed up the date from the old one, it should show up once the new one is set up right?
And does an "incomplete" status on iCloud mean it can't be restored to the new iPhone?
Help please

What I mean is still track my stolen one. I don't know if this will make sense to you but I'm thinking that if I restore the back up data on this phone..on my stolen phone it will like forget the icloud account or something and think this phone is the stolen one so when I go to track the stolen one, it will show that phone as the one I have now because I restored the back up from that phone.

THE DATA FROM THE ORACLE DATABASE VIEW DATA IS NOT REFERESHED AUTOMATICALLY

THE DATA FROM THE ORACLE DATABASE VIEW DATA IS NOT REFERESHED AUTOMATICALLY IN OBIEE DASHBOARD(ANSWERS)
UNLESS AND UNTILL I OPEN THE ORACLE BI ADMINISTRATOR TOOL AND DO UPDATE ALL ROWCOUNT AND THEN SAVE THE RPD.
WHERE AS ORACLE DATABASE TABLE DATA IS AUTOMATICALLY REFRESHED.
PLS SOMEONE HELP OUT IN THIS ISSUE.

Check whether you have enable cache on that view?

TCP packet out of state: First packet isn't SYN & Outlook is trying to retrieve data from the Microsoft Exchange Server [CAS-ARray]

We are transitioning from Exchange 2003 to Exchange 2010. We found Outlook online mode (non-cached mode) have many warning "Outlook is trying to retrieve data from the Microsoft Exchange Server [CAS-ARray]", usually happen when users tried to open
address book but sometimes even normal operation like click the Send button. The problem does not affect OWA and extremely rare when Outlook is running in cached mode. Check the firewall logs, we notice a lot of "TCP Packet Out of State" drops.
We have a lot from the CAS/HT to DC/GC on TCP_3268 and LDAP. And the errors are "TCP packet out of state: First packet isn't SYN" with tcp_flags FIN-ACK, PUSH-ACK.
We also have a lot from CAS/HT to the Outlook Clients on the static RPC port (TCP_59933). And the errors are "TCP packet out of state: First packet isn't SYN" with tcp_flags FIN-ACK, PUSH-ACK and RST-ACK, ACK.
This happens even on Outlook 2010 which I though it has TCP Keep Alive implmented to keep the session active within 1 hour.
Can somebody tell me if these out-of-state are the cause of our problem? And how to fix it?
THANK 1,000,000

Hello AndyHWC,
I did some consulting with our CAS team and received the following feedback to your post:
It is difficult to determine what is causing resets without seeing the captures first hand however, the concern is that you are seeing dropped packets on the firewall logs. Where is this firewall located?
Based on the description "Check the firewall logs, we notice a lot of "TCP Packet Out of State" drops." and "We have a lot from the CAS/HT to DC/GC on TCP_3268 and
LDAP." indicates to me that the firewall is between CAS and GC. This not supported under any circumstances and would explain the issue they are seeing with clients trying to "retrieve data from the GC".
If there is not a firewall between the GC and CAS then a Microsoft support engineer would need to have concurrent Netmon Captures from client, CAS, GC during the
issue to analyze. If only one GC exists consider adding another GC to handle the client requests and for fault tolerance.
Also verify that all NIC card drivers are updated to the latest driver version
More information about firewalls with Exchange 2007/2010
http://msexchangeteam.com/archive/2009/10/21/452929.aspx
http://technet.microsoft.com/en-us/library/bb232184(EXCHG.80).aspx
You can install the Client Access server role on an Exchange 2007 computer that is running any other server roles except for the Edge Transport server role. You
cannot install the Client Access server role on a computer that is installed in a cluster. Installation of a Client Access server in a perimeter network is not supported.
http://technet.microsoft.com/en-us/library/dd577077(EXCHG.80).aspx
“The Installation of a Client Access Server in a Perimeter Network Is Not Supported
Issue You may want to install an Exchange 2007 Client Access server in a perimeter network. However, this type of installation is not supported in Exchange
2007.
Cause The Exchange 2007 Client Access server role is not supported in any configuration in which a firewall is located between the Client Access server
and a Mailbox server or a domain controller. This includes firewall devices, firewall programs, or any program or device that is designed to restrict traffic between two network locations.
For correct operation, Client Access servers require typical domain connectivity to domain controllers and global catalog servers. Because any devices
or programs that restrict or reduce access to domain controllers or global catalog servers may affect the correct operation of the Client Access server, we do not support this type of configuration.
Resolution To resolve this issue, move the Client Access servers to the internal network. For more information about the ports that Exchange 2007 uses
for various services, see Data Path Security Reference.”
Thanks,
Kevin Ca - MSFT
Kevin Ca - MSFT

HT1296 I bought my wife a new Ipad 3. How do I transfer her data from the old Ipad 1 to the new one?

I bought my wife a new Ipad 3. How do I transfer her data from the old Ipad 1 to the new one?

Sync the old one, and get a full back up stored. Make sure you transfer your purchases to I tunes, and make sure you upload any photos taken on the pad, or imported thru the cck.
Then plug the new pad in, and set it up from the backup of the old one. In theory, all the stuff that was in the back up will migrate to the new pad. If apps, music or books get lost, you can redownload them for free, using the same appLe id.
If you are selling or gifting the old one, When you are done and happy with the new set up, go to setting, general, reset, reset all content and data. This will place the pad in factory new condition. Lastly, if it is a 3 g pad, especially if it a Verizon pad, make sure to cancel the plan

The display on my MacBook Pro from 2007 finally gave out, how do I transfer all the data from the old one onto my new one?

A week or so ago, the screen on the Macbook Pro I've had for 5 years went permanently black. The screen itself still works, but it's just all black. Went from flickering/flashing to black. I didn't have any kind of warranty on it or anything, and in addition to all of the other things about it that needed fixing, it seemed like it'd just be cheaper to get a new Macbook Pro.
My question is: How do I get all the stuff from the old laptop to the new laptop without having to use the old laptop's display? Is there a cable I can use to connect the two, and I can just access the old one from the new one?

FireWire between the two (get appropriate 800-800 or 400-800), Target Disk Mode on the old one, appears as an external disk on the new one. Drag everything over, or use Setup Assistant if first start of new one, or plain old Migration Assistant. You really don't need a display to see a prancing FireWire icon, do you?
http://support.apple.com/kb/HT1661
http://support.apple.com/kb/HT4889
(with the added advantage that since you ain't booting anything off the drive, can turn the Mac on or off at will without risking data corruption on the drive)

HT3231 I have migrated all of my data from my old 2006 MacBook to a new 2011 MacBook Pro. Everything went fine. How to I remove all of my data from the old MacBook so I can give it to my girlfriend to support her iPod? I want to remove everything and star

I have succesfully migrated my data from my 2006 MacBook to a new 2011 MacBook Pro. How do I delete ALL of my personal data from the MacBook so my girlfriend can use it to support iTunes and her iPod?

Order a Snow Leopard 10.6 install disk for $29 from The Apple Store as long as you have at least 1gb of RAM. http://store.apple.com/us/product/MC573Z/A?mco=MTY3ODQ5OTY
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window.
Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. You should see your hard drive in the left hand column along with your other drives. Click on the drive and select the Erase tab. Set the format value to Mac OS Extended (Journaled) and click the Erase button. After that has finished select the Partition tab. Type in a Name for your hard drive and select how many partitions you want from the Volume Scheme. The usual setting is one partition. Click on the Options button after you've selected a partition to make sure it's set for GUID. Then click the Apply button and after the Partitioning is done quit Disk Utility.
You can now follow the instructions on the install screen

Frequency migrate data from the operational database SCOM 2012 SP1

What is the frequency with which
information is migrated from the operational database
to the data warehouse database,
are in separate servers and should perform
maintenance tasks such as defragmentation to optimize
disk space, this is recommended?
thank you very much

Hi
Refer below link for data sync from DB to DW
http://blogs.technet.com/b/jonathanalmquist/archive/2010/01/24/how-and-when-is-data-written-or-synchronized-to-the-data-warehouse.aspx
Dataware house
http://blogs.technet.com/b/stefan_stranger/archive/2009/08/15/everything-you-wanted-to-know-about-opsmgr-data-warehouse-grooming-but-were-afraid-to-ask.aspx
Regards
sridhar v

After transferring my iTunes data from the old to the new windowsPC according to the apple-instructions, the songs don't start playing when I click them as usual, although loudspeaker symbol appears on the left side

After transferring my iTunes data from my old to the new windowsPC following exactly the original apple instructions everything LOOKS allright when I start iTunes on my new PC. But when I click the song as usual, it doesn't start playing, although the little loudspeaker symbol on the left side appears. What went wrong, what can I do?

I guess nobody knows if the crash that occured was legitimate or not? Apple phone support could do nothing for me, so I guess I am left to drive 45 minutes to the nearest store.

Can we still export data from the PSA?

in bw 3.5 we were able to create an export datasource from the PSA. now in netweaver 7.0 it seems this functionality is lost. am i correct on this?
thanks

Hi Brian,
in BI 7.0 the PSA belongs to the new BI-Datasource object which you can maintain with transaction RSDS. The new transformations and data transfer processes can be directly connected to the datasource without having to generate an export datasource. Also InfoProvide can now directly connected without generating export datasources.
Bye
Frank

HTTP post data from the Oracle database to another web server

Hi ,
I have searched the forum and the net on this. And yes I have followed the links
http://awads.net/wp/2005/11/30/http-post-from-inside-oracle/
http://manib.wordpress.com/2007/12/03/utl_http/
and Eddie Awad's Blog on the same topic. I was successful in calling the servlet but I keep getting errors.
I am using Oracle 10 g and My servlet is part of a ADF BC JSF application.
My requirement is that I have blob table in another DB and our Oracle Forms application based on another DB has to view the documents . Viewing blobs over dblinks is not possible. So Option 1 is to call a procedure passing the doc_blob_id parameter and call the web server passing the parameters.
The errors I am getting is:
First the parameters passed returned null. and
2. Since my servlet directly downloads the document on the response outputStream, gives this error.
'com.evermind.server.http.HttpIOException: An established connection was aborted by the software in your host machine'
Any help please. I am running out of time.
Thanks

user10264958 wrote:
My requirement is that I have blob table in another DB and our Oracle Forms application based on another DB has to view the documents . Viewing blobs over dblinks is not possible. Incorrect. You can use remote LOBs via a database link. However, you cannot use a local LOB variable (called a LOB <i>locator</i>) to reference a remote LOB. A LOB variable/locator is a pointer - that pointer cannot reference a LOB that resides on a remote server. So simply do not use a LOB variable locally as it cannot reference a remote LOB.
Instead provide a remote interface that can deal with that LOB remotely, dereference that pointer on the remote system, and pass the actual contents being pointed at, to the local database.
The following demonstrates the basic approach. How one designs and implements the actual remote interface, need to be decided taking existing requirements into consideration. I simply used a very basic wrapper function.
SQL> --// we create a database link to our own database as it is easier for demonstration purposes
SQL> create database link remote_db connect to scott identified by tiger using
2 '(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=127.0.0.1)(PORT=1521))(CONNECT_DATA=(SID=dev)(SERVER=dedicated)))';
Database link created.
SQL> --// we create a table with a CLOB that we will access via this db link
SQL> create table xml_files( file_id number, xml_file clob );
Table created.
SQL> insert into xml_files values( 1, '<root><text>What do you want, universe?</text></root>' );
1 row created.
SQL> commit;
Commit complete.
SQL> --// a local select against the table works fine
SQL> select x.*, length(xml_file) as "SIZE" from xml_files x;
   FILE_ID XML_FILE                                                                                SIZE
         1 <root><text>What do you want, universe?</text></root>                                    53
SQL> --// a remote select against the table fails as we cannot use remote pointers/locators
SQL> select * from xml_files@remote_db x;
ERROR:
ORA-22992: cannot use LOB locators selected from remote tables
no rows selected
SQL> //-- we create an interface on the remote db to deal with the pointer for us
SQL> create or replace function ReturnXMLFile( fileID number, offset integer, amount integer ) return varchar2 is
2          buffer varchar2(32767);
3 begin
4          select
5                  DBMS_LOB.SubStr( x.xml_file, amount, offset )
6                          into
7                  buffer
8          from    xml_files x
9          where   x.file_id = fileID;
10
11          return( buffer );
12 end;
13 /
Function created.
SQL> --// we now can access the contents of the remote LOB (only in 4000 char chunks using this example)
SQL> select
2          file_id,
3          ReturnXMLFile@remote_db( x.file_id, 1, 4000 ) as "Chunk_1"
4 from       xml_files@remote_db x;
   FILE_ID Chunk_1
         1 <root><text>What do you want, universe?</text></root>
SQL> --// we can also copy the entire remote LOB across into a local LOB and use the local one
SQL> declare
2          c               clob;
3          pos             integer;
4          iterations      integer;
5          buf             varchar2(20);   --// small buffer for demonstration purposes only
6 begin
7          DBMS_LOB.CreateTemporary( c, true );
8
9          pos := 1;
10          iterations := 1;
11          loop
12                  buf := ReturnXMLFile@remote_db( 1, pos, 20 );
13                  exit when buf is null;
14                  pos := pos + length(buf);
15                  iterations := iterations + 1;
16                  DBMS_LOB.WriteAppend( c, length(buf), buf );
17          end loop;
18
19          DBMS_OUTPUT.put_line( 'Copied '||length(c)||' byte(s) from remote LOB' );
20          DBMS_OUTPUT.put_line( 'Read Iterations: '||iterations );
21          DBMS_OUTPUT.put_line( 'LOB contents (1-4000):'|| DBMS_LOB.SubStr(c,4000,1) );
22
23          DBMS_LOB.FreeTemporary( c );
24 end;
25 /
Copied 53 byte(s) from remote LOB
Read Iterations: 4
LOB contents (1-4000):<root><text>What do you want, universe?</text></root>
PL/SQL procedure successfully completed.
SQL> The concern is the size of the LOB. It does not always make sense to access the entire LOB in the database. What if that LOB is a 100GB in size? Irrespective of how you do it, selecting that LOB column from that table will require a 100GB of data to be transferred from the database to your client.
So you need to decide WHY you want the LOB on the client (which will be the local PL/SQL code in case of dealing with a LOB on a remote database)? Do you need the entire LOB? Do you need a specific piece from it? Do you need the database to first parse that LOB into a more structured data struct and then pass specific information from that struct to you? Etc.
The bottom line however is that you can use remote LOBs. Simply that you cannot use a local pointer variable to point and dereference a remote LOB.

I just got the new IPad and managed to transfer most of my data from the old IPad. I figured out how to download the books through bookstore but I have realized now that I have two accounts. Can I go back to the old acct to get the books on iPad

I was able to transfer most everything from my old iPad to the new one except the books. It seems that I have two accounts to buy books and can only download from the newest one. Can they be merged, or can I somehow go back to the old one to get the rest? I think both accounts are still active.

No, all purchases made with an Apple ID remain with that Apple ID and cannot be accessed using the other Apple ID.
I know this is a pain but that's the way it is. As far as anyone knows individual accounts will always be "active", but they cannot be merged.

Why is my WAR file still referencing data from the old database server?

Similar Messages

Maybe you are looking for