Why is Src and Dst memory not pinned?

I just completed my first video filter that is CUDA accelerated using the Premiere Pro SDK for CS6 and CC7. If suitable CUDA hardware is available, it use it, but if not then it uses a multithreaded software implementation. Both work extremely well. However, the CUDA implementation could be a lot faster if the source and destination memory buffers were "pinned" memory. Since they are not, I must copy the source and destination memory to a pinned buffer, and then asynchronously copy that to CUDA device memory and back. The overhead to copy from the source/destination memory to pinned memory is significant. Without the copy to pinned memory the CUDA on my laptop is fast enought to process 130 fps for a 1920 by 1080 HD video. However with the pinned memory I only get about 45 fps.
If I do the exact same filter in DirectShow, the source and destination buffer pools are always pinned and the filter runs much faster than it does on Premiere Pro. I noticed that the new GPU filter example uses and AE interface, but it does allow access to pinned memory. However, I have not mastered the AE interface, and I am reluctant to giving up 13 years of learning curve on the Premiere SDK.
Is there any good reason why the source and destination buffer pool in the Premiere Pro SDK is not pinned memory?
Gene

Steve,
That is my whole point. To copy from the PC host memory to the CUDA device memory asynchronously, the host memory must be pinned. Hence, the source and destination memory should be pinned. Otherwise, I must copy the source memory to pinned memory I have allocated on the PC, copy it asynchronously to the CUDA device memory, process it on the CUDA device, asynchronously copy it back to the PC pinned memory, and then copy it to the destination memory.
If you copy synchronously, it is slow as Christmas! Therefore, you must copy the memory asynchronously, or you should not use CUDA and GPU acceleration.
My question still stands. Why is the source and destination memory on the PC used by Premiere Pro not pinned memory?
Gene
Gene A. Grindstaff
Executive Manager, SG&I
T: 1.256.730.6983 M: 1.256.566.5376 F: 1.256.730.8046
E: mailto:[email protected]
Intergraph Corporation
19 Interpro Road
Madison, AL 35758 USA
www.intergraph.com/sgi<http://www.intergraph.com/sgi> |
LinkedIn<http://www.linkedin.com/groups?gid=127267&trk=myg_ugrp_ovr> | Facebook<http://www.facebook.com/intergraph> | Twitter<http://twitter.com/intergraph

Similar Messages

Is src and dst NAT possible in multiple rules on the ASA?

Hello,
We have +/- 50 customer companies that will have to enter our network via IPsec s2s VPN's and as backup the customers have the option to enter our network via a leased line. Since they can enter multiple routes we give them a source IP depending what side they enter so we know the route back internally in the network to the correct FW they entered.
For the s2s we have to do source NAT on our side since we cannot burden all these customers with different NAT's for both the leased line and for the s2s. And we have to do destination NAT since the customers can access different DMZ systems depending on the application they connect to.
1) source NAT can be 1 NAT rule per company (so hide NAT behind 1 IP)
2) destination NAT is multiple rules (see below)
At the moment we have 12 NAT rules per company since we have configured src and dst NAT in one rule to make it work.
See example below:
Question: How can we configure src and dst NAT in multiple rules so that we dont need 12 NAT rules per company?
ASA cluster: single mode - Active/Standby
asa922-4-smp-k8.bin
asdm-731-101.bin
Src REAL
Src Mapped
Dst MAPPED
Dst REAL
Service
192.168.143.128_29
192.168.143.128_29
192.168.143.128_29
192.168.143.128_29
192.168.143.128_29
192.168.143.128_29
192.168.143.128_29
192.168.143.128_29
192.168.143.128_29
192.168.143.128_29
192.168.143.128_29
192.168.143.128_29
11.11.11.1
11.11.11.1
11.11.11.1
11.11.11.1
11.11.11.1
11.11.11.1
11.11.11.1
11.11.11.1
11.11.11.1
11.11.11.1
11.11.11.1
11.11.11.1
19.19.19.90
19.19.19.90
19.19.19.11
19.19.19.11
19.19.19.90
19.19.19.90
19.19.19.180
19.19.19.180
19.19.19.83
19.19.19.83
19.19.19.90
19.19.19.92
10.10.10.42
10.10.10.42
10.10.10.42
10.10.10.42
10.10.10.41
10.10.10.41
10.10.10.44
10.10.10.44
10.10.10.47
10.10.10.47
10.10.10.47
10.10.10.47
53-udp
53-tcp
53-udp
53-tcp
PoP3
SMTP
SMTP
PoP3
http
tcp-5555
http
http

Steve,
That is my whole point. To copy from the PC host memory to the CUDA device memory asynchronously, the host memory must be pinned. Hence, the source and destination memory should be pinned. Otherwise, I must copy the source memory to pinned memory I have allocated on the PC, copy it asynchronously to the CUDA device memory, process it on the CUDA device, asynchronously copy it back to the PC pinned memory, and then copy it to the destination memory.
If you copy synchronously, it is slow as Christmas! Therefore, you must copy the memory asynchronously, or you should not use CUDA and GPU acceleration.
My question still stands. Why is the source and destination memory on the PC used by Premiere Pro not pinned memory?
Gene
Gene A. Grindstaff
Executive Manager, SG&I
T: 1.256.730.6983 M: 1.256.566.5376 F: 1.256.730.8046
E: mailto:[email protected]
Intergraph Corporation
19 Interpro Road
Madison, AL 35758 USA
www.intergraph.com/sgi<http://www.intergraph.com/sgi> |
LinkedIn<http://www.linkedin.com/groups?gid=127267&trk=myg_ugrp_ovr> | Facebook<http://www.facebook.com/intergraph> | Twitter<http://twitter.com/intergraph

Why Pages, keynotes, and Numbers are not free? I bought my mac Oct 14, 2013

Why Pages, keynotes, and Numbers are not free? I bought my Mac at Oct 14, 2013. With the new OS X Mavericks relaeaed, Apple said that these three Apps are free to new buyers, I bought Macbook Air last week. Why I didn't see these three Apps free after I logged in the Mac App Store?
Please, Help!

***For those that purchased iWork 09 not on the app store but as a retail disk copy you can get the update for iWork even though it may show $19.99 for all the apps:
You can reupdate to iWork 9.3 by going here http://support.apple.com/kb/DL1563
then after it is updated close the app store if opened then open it again and sign out then sign in and then all the iwork 2013 apps should show as update rather than $19.99 cost each. This worked for me. I bought iwork '09 on disk but it showed 19.99 each after I upgraded to Mavericks so followed the above steps and it worked. I am now updating all my iWork suite I bought on disk, NOT on the Mac app store and now I have a Mac app store set!
Apple sure has a problem that needs to be fixed otherwise iWork will eventually be free for everyone...
Someone at Apple forgot all of us old retail people before the Mac App store existed!

Why Pages, keynotes, and Numbers are not free?

Why Pages, keynotes, and Numbers are not free? I bought my Mac at Oct 14, 2013. With the new OS X Mavericks relaeaed, Apple said that these three Apps are free to new buyers, I bought Macbook Air last week. Why I didn't see these three Apps free after I logged in the Mac App Store?
Please, Help!

Don't keep reposting this over and over! Or you posts will be deleted.

HT4623 I just tried updating my iPad through iTunes and it said it was unsuccessful and now is telling me to restore my iPad!! why is this and I'm not sure if it did back up because my iPad will not turn on.

I just tried updating my iPad through iTunes and it said it was unsuccessful and now is telling me to restore my iPad!! why is this and I'm not sure if it did back up because my iPad will not turn on.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Why is adobe and adobe export not available in sri lanka

why is adobe and adobe export not available in sri lanka

Hi Susantha,
We are only able to offer the ExportPDF in countries where we have an online store presence. Unfortunately we do not have an online store for Sri Lanka. The only alternative I can suggest is Adobe Acrobat for converting PDF files to Word or Excel.
Please let me know if you have any questions.
David

Why the time and date is not correct when I save a waveform in txt format, using Labview 6.1?

I am using Labview 6.1 and my operation system is Windows 98. The date/time properties is configured in the Windows (time and date in the control panel is correct). I generated a waveform using Basic Function Generator.vi and saved this using the Export Waveforms to Spreadsheet File.vi. When I opened this file the date and time was wrong. Only the delta t was correct and it did not show the date neither the time, only a float number. How can I adjust the correct time?

Actually, the date/time is correct, it is expressed as seconds since January 01, 1904.
In order to print the string version of the date/time from your file, you will need to write a utility that converts the date/time to a string or series of strings in whatever format you wish. This can be done by reading the first line (I assume that is the line with the time on it), formatting the date/time into a string, and writing over this information in the file.
The waveform VIs were meant to be used internally to read and write waveform data. Any use beyond that should require you to add formatting and other information/data as necessary.

Why table getWidth and setWidth is not working when resize column the table

hi all,
i want to know why the setWidth is not working in the following code,
try to uncomment the code in columnMarginChanged method and run it wont resize the table.
i cont set width(using setWidth) of the other table column using getWidth of the main table column.
and i want to resize the right side columns only (you can check when you resize the any column the left and right side columns also resizing)
any suggestions could be helpful.
import java.awt.BorderLayout;
import java.awt.Dimension;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.Box;
import javax.swing.BoxLayout;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JTable;
import javax.swing.SwingUtilities;
import javax.swing.event.ChangeEvent;
import javax.swing.event.ListSelectionEvent;
import javax.swing.event.TableColumnModelEvent;
import javax.swing.event.TableColumnModelListener;
import javax.swing.table.TableColumnModel;
public class SynTableResize extends JFrame implements TableColumnModelListener, ActionListener
    JTable table1       = new JTable(5, 5);
    JTable table2       = new JTable(5, 5);
    JTable table3       = new JTable(5, 5);
    JButton btn          = new JButton("refresh");
    JPanel pnlcontainer = new JPanel();
    public SynTableResize()
        setLayout(new BorderLayout());
        pnlcontainer.setLayout(new BoxLayout(pnlcontainer, BoxLayout.Y_AXIS));
        pnlcontainer.add(table1.getTableHeader());
        pnlcontainer.add(Box.createVerticalStrut(5));
        pnlcontainer.add(table2);
        pnlcontainer.add(Box.createVerticalStrut(5));
        pnlcontainer.add(table3);
        table2.setTableHeader(null);
        table3.setTableHeader(null);
        table1.getColumnModel().addColumnModelListener(this);
        table3.setColumnModel(table1.getColumnModel());
        table2.setColumnModel(table1.getColumnModel());
        table2.getColumnModel().addColumnModelListener(table1);
        table3.getColumnModel().addColumnModelListener(table1);
        btn.addActionListener(this);
        getContentPane().add(pnlcontainer, BorderLayout.CENTER);
        getContentPane().add(btn, BorderLayout.SOUTH);
        setSize(new Dimension(400, 400));
        setVisible(true);
        setDefaultCloseOperation(EXIT_ON_CLOSE);
    public static void main(String[] args)
        new SynTableResize();
    public void columnAdded(TableColumnModelEvent e)
    public void columnMarginChanged(ChangeEvent e)
        TableColumnModel tcm = table1.getColumnModel();
        int columns = tcm.getColumnCount();
        for (int i = 0; i < columns; i++)
            table2.getColumnModel().getColumn(i).setPreferredWidth(tcm.getColumn(i).getWidth());
            table3.getColumnModel().getColumn(i).setPreferredWidth(tcm.getColumn(i).getWidth());
            // the following commented code wont work.
//            table2.getColumnModel().getColumn(i).setPreferredWidth(tcm.getColumn(i).getPreferredWidth());
//            table3.getColumnModel().getColumn(i).setPreferredWidth(tcm.getColumn(i).getPreferredWidth());
//            table2.getColumnModel().getColumn(i).setWidth(tcm.getColumn(i).getWidth());
//            table3.getColumnModel().getColumn(i).setWidth(tcm.getColumn(i).getWidth());
        SwingUtilities.invokeLater(new Runnable()
            public void run()
                table2.revalidate();
                table3.revalidate();
    public void columnMoved(TableColumnModelEvent e)
    public void columnRemoved(TableColumnModelEvent e)
    public void columnSelectionChanged(ListSelectionEvent e)
    public void actionPerformed(ActionEvent e)
        JTable table = new JTable(5, 5);
        table.setColumnModel(table1.getColumnModel());
        table.getColumnModel().addColumnModelListener(table1);
        pnlcontainer.add(Box.createVerticalStrut(5));
        pnlcontainer.add(table);
        pnlcontainer.validate();
        pnlcontainer.repaint();
}thanks
dayananda b v

hi,
thanks for your replay,
yes i know that, you can check the following code it works fine.
actually what i want is, when i resize table column it shold not automaticaly reszie when table resized and i dont want horizontal scroll bar, meaning that all table columns should resize with in the table size(say width 300)
if i make table autoresize off than horizontal scroll bar will appear and the other columns moved and i want scroll to view other columns.
please suggest me some way doing it, i tried with doLayout() no help,
doLayout() method only can be used when table resizes. first off all i want to restrict table resizing with in the limited size
import java.awt.BorderLayout;
import java.awt.Dimension;
import javax.swing.Box;
import javax.swing.BoxLayout;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JScrollPane;
import javax.swing.JTable;
import javax.swing.event.ChangeEvent;
import javax.swing.table.TableColumnModel;
public class TempSycnTable extends JFrame
    JTable table1       = new JTable(5, 5);
    MyTable table2       = new MyTable(5, 5);
    MyTable table3       = new MyTable(5, 5);
    JPanel pnlcontainer = new JPanel();
    public TempSycnTable()
        JScrollPane src2 = new JScrollPane(table2);
        JScrollPane src3 = new JScrollPane(table3);
//        table1.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
//        table2.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
//        table3.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
//        src2.setHorizontalScrollBarPolicy(JScrollPane.HORIZONTAL_SCROLLBAR_NEVER);
//        src3.setHorizontalScrollBarPolicy(JScrollPane.HORIZONTAL_SCROLLBAR_NEVER);
        table2.setTableHeader(null);
        table3.setTableHeader(null);
        table3.setColumnModel(table1.getColumnModel());
        table2.setColumnModel(table1.getColumnModel());
        table2.getColumnModel().addColumnModelListener(table1);
        table3.getColumnModel().addColumnModelListener(table1);
        table2.setTableHeader(null);
        table3.setTableHeader(null);
        setLayout(new BorderLayout());
        pnlcontainer.setLayout(new BoxLayout(pnlcontainer, BoxLayout.Y_AXIS));
        pnlcontainer.add(table1.getTableHeader());
        pnlcontainer.add(Box.createVerticalStrut(5));
        pnlcontainer.add(src2);
        pnlcontainer.add(Box.createVerticalStrut(5));
        pnlcontainer.add(src3);
        getContentPane().add(pnlcontainer, BorderLayout.CENTER);
        setSize(new Dimension(300, 300));
        setVisible(true);
        setDefaultCloseOperation(EXIT_ON_CLOSE);
    public static void main(String[] args)
        new TempSycnTable();
    class MyTable extends JTable
        public MyTable()
            super();
        public MyTable(int numRows, int numColumns)
            super(numRows, numColumns);
        public void columnMarginChanged(ChangeEvent event)
            final TableColumnModel eventModel = table1.getColumnModel();
            final TableColumnModel thisModel = getColumnModel();
            final int columnCount = eventModel.getColumnCount();
            for (int i = 0; i < columnCount; i++)
                thisModel.getColumn(i).setWidth(eventModel.getColumn(i).getWidth());
            repaint();
}thanks
daya

Why pn-begda and pn-endda not filled ? but pn-begps and pn-endps filled.

Hi,
Im using logical database PNP.
in all my reports, whenever i fillPayroll period, the from date and enddate (pn-begda and pn-endda) is populated for the given pay period.
In one of my report, these value (pn-begda and endda) are blank.
pn-begps and pn-endps is getting filled instead. (Why ? What setting i have to do, to bring pn-benga and pn-endda?)
Thanks,
Jhove.

Hi Jhove,
BEGPS and ENDPS refer to person selection period (whether a person exists on a specified period) whereas BEGDA and ENDDA refer to data selection period (whether a specific IT record exists in a specified period). Probably in your report person selection period fields are filled whereas data selection period fields are left blank (or these fields even do not exist in your selection screen). Thus, you need to check whether data selection period is available in selection screen and it is filled prior to report execution.
Best regards,
Dilek

Why Street prefix and suffix are not provided in ship to address?

Hi Experts,
Anyone have any idea why SAP provided Street prefix and Suffix fields in "BBPADDRINTC (Edit Internal Address)" screen but not in Ship to address screen of shopping cart.
Is there any OSS note which can include these fields into ship to address screen. Please advise.
Regards,
Kamal

Hello Kamal,
Even though the fields Street Prefix / Sufix are available in the address maintenance screen (BBPADDRINTC), they are not available in the procurement documents, like Purchase Orders or Shopping Carts.
The fields STR_SUPPL1 (prefix) and STR_SUPPL3 (suffix) are not implemented in such screens.
According SAP developers, it is not possible to provide a note to change this behavior at this time, since it is part of the design and, making a change, would require changing all other documents and versions.
Kind regards,
Ricardo

Why are iLife and iWork apps not installed on my Mac?

Recently purchased a used iMac late 2013 model and met the seller at the Apple Store to factory reset the mac. Well that was done succesfully but upon my return home and unboxing the iMac once i logged on and went to look for iMovie app it was nowhere to be found. I looked for the other apps from iLife and iWork and they were nowhere either. I tried the search tool and nothing came up and when I went to search for them in the app store thinking I just had to re-download them they were not FREE for me to install.
Isn't iLife and iWorks included with every mac for free? CAn someone please help me get these if I am entitled to them for free or explain why I have to pay for them? TIA.
-Freddy

They are free for the initial owner and if he accepts them at the app store, then they are permanently tied to his Apple ID and password. Their licenses are not transferable - subsequent owners must purchase the apps if they want them. Here are some excerpts from the licensing agreement:
B. If you obtained the Apple Software preinstalled by Apple on Apple-branded hardware, in order to use
the Apple Software on more than one of the Apple-branded computers you own or control under the
Usage Rules, you must log in to the Mac App Store and associate the Apple Software with your Mac
App Store account. If you choose not to associate the preinstalled Apple Software with your Mac App
Store account, you are permitted to install, use and run one (1) copy of the Apple Software on a single
Apple-branded computer at any one time. Please also note that by choosing to associate the
preinstalled Apple Software with your Mac App Store account, you will also associate any other Apple
software applications that also came preinstalled by Apple on your Apple-branded hardware at the time
of purchase (excluding OS X, Safari, and system applications and tools).
and:
Apple Software obtained from the Mac App Store is not transferable. If you sell your Apple-branded
hardware to a third party, you must remove the Apple Software from the Apple-branded hardware before doing so.
If the initial owner does NOT associate the software with his app store account (in other words, he does not accept / install them), then he may transfer his license rights to a subsequent buyer.

New Mac: Why are CC and Photoshop Elements not working when Lightroom and Reader are fine

Last week I changed computers (swapping an old Mac for a 13-in MacBook Pro Retina running OSX Yosemite 10.10.3. I copied all my data over to the new machine using Migration Assistant.
All programs work fine (including my copy of Lightroom 3 and Reader XI). But my CC and Photoshop Elements 10 do not. I have tried uninstalling both, but whenever I try to reinstall PE10 from its disk or download it just stops almost at the end. I then I get an "initiation failed" message, along with a request to download the now defunct "Support Advisor" app!
I cannot download Adobe Application Manager, or the CC desktop app either - for the former I get an "initiation failed" message, along with the "download Support Advisor" app" message again! For the latter I get a message saying "Adobe Creative Cloud Is Needed to Resolve this problem - however it is missing or damaged." Then I get a message and a link to download Creative Cloud. Then when I've downloaded it and I click on the installer... it runs for a bit and then I get the message again: "Adobe Creative Cloud Is Needed to Resolve this problem - however it is missing or damaged." And I get a prompt and link to download the CC app. Guess what happens next? And so it goes on. And on and on, in a tedious circle.
This is incredibly annoying and frustrating as I have work to do! Anyone have any ideas what's happening?
Cheers
K

do not use migration to install adobe programs.
you should uninstall and clean whatever you've done, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
then dl the cc desktop app to your new computer and use it to install your adobe cc programs, Download Adobe Creative Cloud apps | Free Adobe CC trial
if you have non-subscription adobe programs, use the installation files for them:
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Why are url and email addresses not fully viewable in a PDF when generated from a Word file?

I have a question?
A colleague in our Copenhagen office wanted to generate a pdf from a Word file. She is working on a Windows 2007 operating system and is running Acrobat Pro 9. When she generated the PDF only part of a url and an email address was visible when the PDF was viewed. She was wofking from Standard settings. I am running the same software on the same Windows platform and using the same computer equipment with the same settings yet I was able to generate a PDF where the full url and email address was visible.
Can anyone out in Adobe Acrobat land provide me with an answer?
Patrick Lennon

That's probably because the Mac people are opening or viewing the PDFs within the Mac's "Mail" program or with the "Preview" program and not with Acrobat.
Since the Windows people aren't using these programs and most likely just Acrobat or Adobe Reader, the layers are kept hidden.
I'm afraid the only way to truly keep those layers hidden is to delete them before saving your file as a PDF. (Of course, do a "Save As" and keep your original .ai file intact.

CSS - src and dst in the same vlan

Hi guys,
I need LB something like this in routed mode:
first data flow:
[client]->[vip1-c(css)]->[www1/www2]
and second (backend) flow is:
[www1/www2]->[vip2-c(css)]->[www3/www4]
vip1,2-c = VIP address on client side
www1,2,3,4 = all servers are in the same VLAN
problematic is second data flow (www1/2 -> vip2 -> www3/4(because www3/4 are in the same VLAN as www1/2).
I have two solution for this:
1. migrate www1/2 and www3/4 to the independent VLANs (this can be design problem in existing topology)
2. communication from www1/2 with destination to www3/4 translate to IP address located on the CSS using group, but I'm not sure if it's possible, or how it's possible to configure on the CSS.
group gr1
add service www1
add service www2
add destination service www3
add destination service www4
vip address ip-from-client-side(for example vip2-c)
active
it's possible to use this configuration?
martin

The group is a good solution.
However, the way it was configured is incorrect.
You either specify the source or destination.
So, if you want to nat all traffic from www1 and www2 you leave the 'add server www1' commands and remove the 'add destination service www3'.
Or you can nat all traffic going to www3 and www4. In this case, you remove the 'add service www1' and keep the others.
Another way of doing this would be to remove all 'add ..' commands and use an acl to specify when to use the group using the option 'sourcegroup gr1' inside the acl.
Gilles.

Why my Photoshop and Illustrator is not responding?

I have Adobe Creative Suite 2 Premium. I purchased it on 2004. It was working perfectly, until recently stopped. I tried to reinstall it, but stil not responding. I used my serial number, but it doesn't recognize it. I use Photoshop and Illustrator for personal work, I don't want to pay for the new one. I want to buy the upgrated, but I'm afraid that I would have the same problem.
Thanks

Hello rrahdar
Make sure the settings for iCloud are set right to ensure that documents are syncing across multiple devices.
iCloud: Change iCloud feature settings
http://support.apple.com/kb/PH2613
Regards,
-Norm G.

Why is Src and Dst memory not pinned?

Similar Messages

Maybe you are looking for