Why my account mood message is not visible ?

hello all,
I just want to know why my id mood message is not visible ? basically i have 2 accounts
so just i added myself in one of the accounts and also then for testing i created 3rd account but in all 3 accounts i am unable to read mood messages on homepage n also when i click on profile i see offline mark instead of mood message why is it so ? can anybody help me ?

Hi,
I have same problem! Do you find solutiun?
Regards,
Ümit

Similar Messages

Lion IMAP account - Sent messages are not sync

Hi all,
this question is not strictly related to Lion, as this "problem" sussist even in the old Leopard, however I was believing it woul have been fixed with the new version.
I've my Mac Book Pro with all my email configured as IMAP.
This is great, I see my Inbox with the same exact copy of the message available online. When I send a message, this is stored in the sent mailbox, and this is great too.
But why all the old messages are not seen in the sent mailbox as well?
It doesn't make sense to me, and there is any option that make a difference. I was initially believing the "keep a local copy of the message" was affecting this.
But the most frustrating thing is that at the very bottom of the left aside there is a second entry, one for each account, which essentially show me a sort of "raw" account with all the folders and labelled messages as the online structure. Is it possible to get rid of that too?
Many thanks
Andrea

I've had the same problem for a while, even before Leopard. It definitely occurs more often when sending bigger messages (i.e. with attachments), and on slower connections (cell card, or even shaky wifi). Always unsettling when I notice it, and seriously frustrating when a Send fails and I've forgotten to Save as Draft.

Message processing not visible in RWB Message monitoring

Hi Experts,
There is an issue where messages are visible at ABAP Stack(SXMB_MONI).But same messages are not visible at RWB Message monitoring Integration server(IE and AE) Level.
Previously adapter status for this scenarios was Inactive in integration directory we taught this could be the issue and made adapter status active in Integration Directory. This did not solve the issue.
When payload is taken and processed from test message tab under RWB-Component monitoring-Integration Engine.
Messages are visible in RWB Message monitoring.
Experts could you please help in finding out what could be the issue,Please let me know if any additional information is required,
Thanks in Advacne,
Seshu.K

There is an issue where messages are visible at ABAP Stack(SXMB_MONI).But same messages are not visible at RWB Message monitoring Integration server(IE and AE) Level.
Check if you have chosen the Status filter as ALL and not "Error".
If you are loking for old messages, then you will not be able to see succesful messages beyond a particular period in the past, since all the succesful messages would have been archived.
To see such messages, you have to choose, the option, show message from "Archive" and not "Database".

BUG REPORT: Messages often not visible on Galaxy S6 / Skype v5.6.0.12393/534

Since a recent Skype update (within last couple of weeks, so perhaps since release of 5.6) the messages are randomly not showing up during an active Skype call. This can also change during a call so that first some messages are showing up (the "blue bubble" over the video, and also on the message list), but then then they stop showing up (no "blue bubble", and the message is not visible on the message list). To see a newly arrived message that did not get displayed, I can scroll to the top of the message buffer so that the previous entries get loaded in. Now when I scroll back to the bottom, the latest message can be seen. This is obviously not very convenient, especially that on every message view the list to scroll to the top gets longer and longer as more previous messages get loaded in. The problem appears to be present on Galaxy S5 on the latest Skype as well, so it is likely not a model specific but a platform specific issue. This makes for a terrible user experience; please try to fix this as soon as [humanly] possible. Thank you!

Since a recent Skype update (within last couple of weeks, so perhaps since release of 5.6) the messages are randomly not showing up during an active Skype call. This can also change during a call so that first some messages are showing up (the "blue bubble" over the video, and also on the message list), but then then they stop showing up (no "blue bubble", and the message is not visible on the message list). To see a newly arrived message that did not get displayed, I can scroll to the top of the message buffer so that the previous entries get loaded in. Now when I scroll back to the bottom, the latest message can be seen. This is obviously not very convenient, especially that on every message view the list to scroll to the top gets longer and longer as more previous messages get loaded in. The problem appears to be present on Galaxy S5 on the latest Skype as well, so it is likely not a model specific but a platform specific issue. This makes for a terrible user experience; please try to fix this as soon as [humanly] possible. Thank you!

I have updated iOS 6 in my iPhone 4S and it went perfectly fine. Just after that when I opened the message app I found that the sms body of system generated messages was not visible after tapping on them.

I have updated iOS 6 in my iPhone 4S and it went perfectly fine. Just after that when I opened the message app I found that the sms body of system generated messages was not visible after tapping on them.

The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
You're on your own. Good luck.

Flagging messages as "Not Visible"

Hi All,
When monitoring JMS destinations, you can see messsages waiting for delivery. You can even take a look at the message content. In the "WebLogic Advanced Admin" course, they say "Developer can flag sensitive messages as not visible". Can you please provide a little code sample explaining how it's done?
Thanks

I think all you may need to do is setup general "browse" restrictions on the queue itself. It may also be possible to set restrictive security permissions on the specific mbean calls that the console uses to view the messages. I've appended some notes that might help. While these notes are focused more on reducing restrictions rather than increasing them, I assume the general steps apply either way.
HTH,
Tom
JMX (mbean/console) Security
Limiting Access to Monitoring Beans
Message Management (JMSDestinationRuntimeMBean and JMSDurableSubscriberRuntimeMBean)
By default, only an administrator can view messages and their contents on the console (because the console uses mbean invocation APIs to view the messages, which require admin privileges).
The security settings of a protected destination (one with a role requirement for browse, send, or receive) also apply. This means that one would need both the admin role, plus the role configured for the destination. The following is a list of operations that extra security checking is performed at the JMS layer besides necessary MBean level security checking.
getMessage/getMessages: Browse permission
moveMessages (from one destination to another): Browse and Receive permission
deleteMessages: Receive permission
ImportMessages: Send permission
If you need finer grained security for queue message management (but not topics), then one option is use a tool that uses standard javax.jms API calls to view messages instead of mbean APIs -- in which case security checks are based on the arbitrary required roles that you've (optionally) configured on the destinations. One such tool might be "HermesJMS".
Another option is to lower the security requirements on the JMSDestinationRuntime mbean. Be careful, because the message management functions can not only simply view the messages, they also may be able to delete or move messages. Steps:
1. In the left pane, select Security Realm.
2. Select myrealm.
3. In Configuration tab, check Use Authorization Providers to Protect JMX Access, click save and then activate changes.
4. Restart the server.
5. In the left pane, select Security Realm.
6. Select myrealm.
7. Go to Users and Groups.
8. In users, create a new user say queueuser, add it to group Monitors
9. Adding it to group Monitors:
a. Select myrealm.
b. Select Users and Groups.
c. Click on user name, in right pane select Groups.
d. From Parent Groups, select monitors, click arrow pointing right side.
10. Go to Roles and Policies - > Realm Policies
11. In Policy table, select JMX Policy Editor.
12. Select Global Scope, click next.
13. From MBean Types, select weblogic.management.runtime
14. Select JMSDestinationRuntimeMBean click next.
15. In Attributes and Operations, select Operations: Permission to Invoke.
16. Click on Create Policy button and save
17. Click on Add Condition, Select Group in Predicate List, click next, type Monitors, say add. Click Finish.

How do I delete t current information and photo's from my iCloud account so it is not visible on any devices

How do I delete t current information and photo's from my iCloud account so it is not visible on any devices

Have a look here...
http://macmost.com/using-iphoto-albums-and-smart-albums-2.html

Document message bar not visible when participating in Shared Review

Hi,
I have initiated a Shared Review using Acrobat Pro 8
Immediately after I finished sending out the notification to other reviewers, the _Review.pdf version of the document is opened for me and the Document Message bar is visible. Therefore I have the option to check for new comments, publish comments.
My colleagues however, when they open the pdf file attachment from their email notification they get the message: "This document has been sent by a user of Acrobat 8.0 Professional for your review. To participate in this review Acrobat 8.0 standard or professional, or later, is required" Pressing OK on that message box opens up the PDF file to be reviewed however the Document Message bar is not visible (there is no Document Message bar icon on the left pane either.). Therefore my colleagues cannot publish their comments.
I also encountered the same issue. After I close my PDF and re-open it, I cannot see the Document Message bar, eventhough I can still see my Review Tracker and the document still listed there.
So, what did I do wrong? I started the shared review by following the prompts:
1. Comments > Send for Shared Review
2. Enable reviewers with Reader to participate
3. Select a network drive to store the shared comments
4. Select the document to be reviewed
5. I've experiment with all the different send notifications options
6. I specified the email address of the reviewers and sent the invite
Thanks a lot for the help..

Does this happen with one particular document or with all your reviews?

Mail messages are not visible

When I open a message in apple mail, the content does not show up. Just the to, From, Title etc. The body of the message is blank. I can sometimes quit mail and relaunch it and see the messages, but not always. It is not consistent with the same message. In other words some messages fail to be visible and then will be fine as others fail. In other words it is not link to any particular mail message, sender or mailbox.
I can see the first part of message in preview column, but opening the mail comes up white. Sometimes when I forward or reply I can see the string and have done that to read message.
Most of my business is done via email so an assistance would be helpful and appreciated.
Is there a way to rebuild a mailbox. I've tried exporting and reimporting the mailbox, but that did not work
I am running a Yosemite 10,10,1 on a 13" MBP (mid 2010)

Quit Mail. Force quit if necessary.
Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
~/Library/Mail/V2/MailData
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder
from the menu bar. Paste into the box that opens by pressing command-V, then press return.
A folder window will open. Inside it there should be files with names as follows:
          Envelope Index
          ExternalUpdates.storedata
Move those files to the Desktop, leaving the window open. Other files in the folder may have longer names that begin as above. Move those files, if any, to the Trash.
Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is damaged and that Mail has to quit. Click OK. Typically, the process takes a few minutes, but it may take hours if you have gigantic mailboxes. In that case, you may be able to speed things up by temporarily adding your home folder to the Privacy list in the Spotlight preference pane. Remove it when Mail has finished importing.
Test. If Mail now works as expected, you can delete the files you moved to the Desktop. Otherwise, post your results.

Message Type not visible in BD10

Hi,
One of the message types is not visible in BD10. Will this appear if I add it using BD60 transaction. But my doubt is that all the message types visible in BD60 are again not there in the F4 help. Is there some othere place where the message type has to be maintained.
Regards,
Deepti

hi
If you add required message type in BD60 you can see it. but the thing is BD10 is only for MATERIALS. So material related message types only you can see there. It you want to see customer related message type then you can go to BD12.
While creating message type in BD60, system should ask reference message type. You have to select one reference message type while selecting dropdown or pressing f4 for reference field in BD60. If you select MATMAS as reference message type there then you can see that message in BD10.
Reward if it is helpful.
Thanks
Siva Kumar

Why is accounts options missing on notes

i have an iphone 4s and an ipad 3d gen. I use notes daily, in both devices the accounts options was shown always. I updated the iphone to iOS 7.0.2, but the ipad is still on ios 6. Anyway, someday after the update, i had to disable the mobile data, later i turned it on again. And tadaaaa there was no accounts options in my notes app on my iphone. In my ipad it is right there, but in my iphone not. I heard that ios7 had some bugs about it, i don't real,y know about this.
I want to know how to have the accounts options back on my iphone. And how to sync the notes that are "On my ipad" to icloud notes.
Yes, i already have an icloud account, so the answer is not creating an account (i was reading in some otther discussion around here).

It's on. I tried turning it off and on again. Someone tells me to delete the account before turning it off and back on. But I don't know.

Moved my account Message Filters not visible

Hello everyone,
I have moved my profile folder. In my folder i have the file msgFilterRules.dat. In my Account settings by server settings I changed the local directory to the new directory. I restarted Thunderbird. My emails are all there. The problem is that the message filters are not working. Also my EnigMail PGP settings are not working.
I updated my Thunderbird to: 31.0 any suggestions?

re : enigmail:
I would try the Enigmail support forum.
http://sourceforge.net/p/enigmail/forum/
re: Message Filters
check they are enabled.
Do they work when manually run? -
either selecting the Inbox folder then Tools > 'Run filters on folder'
or Tools > Mesage Filters
select Inbox for the correct mail account
click on Run.

Why are Panasonic GX7 RAW photos not visible in Aperture but in OS X Mavericks and iPhoto?

My Panasonic GX7 RAW photos seem to be visible in OS X Mavericks and iPhoto, but bizarrely not in Aperture (3.5.1).
Does anyone know why this would be? Any solution greatly appreciated.
I've been unable to mange a significant number of images for almost 7 months now due to Aperture's lack of GX7 RAW support and am seriously considering migrating to Lightroom 5. Aperture has been my workflow application of choice for the last 7 or 8 years, but I feel the current situation has become unacceptable and deeply disappointing .

That camera was supported in digital camera Raw 5.0.1 and Aperture 3.4.5 or later. As you say the files are supported in iPhoto it seems you have the right Raw file.
Have you tried it with new imports in Aperture does it still fail? What if you reprocess the Raw files in Aperture, any change?

SXMB_MONI_BPE - Message Payload not visible in container

I have a message that is failing a mapping within an Integration Process. This is an Async process end-to-end. I have trace_level set to 3, and logging/logging_propagation/logging/sync set to 1.
I view the failed workflow in SXMB_MONI_BPE/list with technical details and see the mapping step that errored. I click this and look under "container". I then drill down to messages and see 1 message going into the mapping. Under this there is some Header information but NO Payload. How can I get this to appear here? Ideally I'd like this to be logged only for error'd workflows.
The mapping exception also does not get propagated back up to sxmb_moni level so the only way to see it is in the alert that's raised/inbox, the defaultTrace or sxmb_moni_bpe. Is there a way to do this (I seem to recall I couldnt do this in XI 3.0/14)? I'm using XI 7.0/12. I do not want a custom alert, just the standard text like you see in the mapping test tool (xxx cannot be produced due to yyy).
Thanks,
James.

Yep, have done that, but 2 issues:
Firstly, it doesnt help ongoing supportability where seeing why a message failed through quick and simple tools like sxmb_moni is quite important.
Secondly because of other dependancies in predecessor steps, I have to do a bit of fiddling around to test it. Not helped by the fact that the Message Mapping test tool doesnt seem to want to show me the xml it produces from a previous mapping (It shows the grid ok, but not the xml !! ) so actually I can only semi-guess the data passed to the map. Hence why I originally wanted to see the message that was passed in the container variable of sxmb_moni_bpe.
Cheers
James.

Message personalizations not visible in WebAccess

Running GW 8.0.2
When personalizing a message (such as changing the subject line) using the full GW client (PC, Mac, or Linux), the personalization doesn't show up in WebAccess. It does from any other platform.
-Barry.

I can confirm that in the beta of Ascot this has been resolved.
T
On Tue, 17 May 2011 13:06:03 GMT, BStJohn
<[email protected]> wrote:
>
>Sorry -- I guess I wasn't clear. Of course you are right that you can't
>personalize from WebAcess, but I mean that when a message is
>personalized from the full client, such as changing the subject line,
>that change isn't visible from WebAccess. The change is visible from
>other desktop clients (PC, Mac, Linux), just not from WebAccess.
>
>That said, I opened an SR and it's been confirmed as a bug. It will be
>fixed in Aspen. Posting here just to let you know and for the benefit
>of anybody else who runs into the issue.
>
>Thanks just the same!
>
>-Barry.

Why my account mood message is not visible ?

Similar Messages

Maybe you are looking for