Why no MRP reqiurments

Hi All,
I create PP Order,but material component don't make MRP requirements.
when I check MD04, for the material component exit quantity required. Why?
what should I check by master data
                                       Material BOM
                                       production version
                                       and Routings
thanks&regards

Dear ,
Did you check in the MD04-Finihsed Good Code and PLant Code -Here u will find the Production Order which u have cretaed directly -Slect the Production Order -Hit Order Repprt symbol-Is it showing all the BOM compoenets either reserved against a reservation or Planned Order or PR if the stock is not available.
Basically , if you have proper BOM (Usage -1-Production , Active Status-1, proper validity ) , while creation of production order , BOM will be selected ( as per the set up of OPL8-Order type depenet parametrs -PP01 application)  and will be planned based on the material availabity .If your material is available then it will high light  as STOCK or else it will create PR/Planned Order .
Couple of cheks u can do
Material Master :
1.All the compoenent should have proper MRP Type -PD MRP1 view
2.It should be blocked for procurement -Basic Data Veiew X plant Stsus-01
3.If this is MTO order , then it should have Individual./Collective Indicator -2
4.In FG material master , make sure that MRP4 view -Depedent Requiment MRP-Blank.Not 1 otherwise it will not be planned while creation of production order as dependent .
5.Make sure that MRP3-Availability Check control-01/02 as applicable
4.Make Sure that MRP4 view -BOM Slection /Explosion indicator -either Blank or 2/3 if you have proper Production Version Maintained i
BOM check :
1.Usage should be -1
2.Relevlt for Costing Indicator-X in BOM Header Item details
3.BOM should have Active Status -1 in Header Status Long text
4.Validdity of BOM while creation of Production order at Header Level.
Routing Check
1.Check the status of routing in CA02-Header as Released -1
2.Usage should be produtcion -1
3.Valididy of the routing .
Regards
JH

Similar Messages

  • Issue of  Schedule Lines in MRP List

    Hi,
    We ran MRP for one material, we observed MRP generated 3 schedules lines with respect to single Schedule Agreement with exception message as 30(Plan Process according to schedule).
    Schedule line 1 --- Delivery Date is 10/06/2011 in MD05, Delivery date in Schedule Agreement is 10/04/2011,Rescheduling date is 08/27/2011 Exception message is 30(Plan Process according to schedule(08/27/2011 08/25/2011).
    Schedule line 2 --- Delivery Date is 10/06/2011 in MD05, Delivery date in Schedule Agreement is 10/04/2011,Rescheduling date is 10/05/2011 Exception message is 30(Plan Process according to schedule(10/05/2011 10/03/2011).
    Schedule line 3 --- Delivery Date is 10/06/2011 in MD05, Delivery date in Schedule Agreement is 10/04/2011,Rescheduling date is 09/08/2011 Exception message is 30(Plan Process according to schedule(09/08/2011 09/06/2011).
    But in Schedule Agreement, we are seeing that all the 3 delivery schedules with delivery dates as "10/04/2011" as GR Processing time is 2 days.
    Can anyone tell why the MRP has not updated the Schedule Agreement with the new Delivery dates proposed by the exception message 30 in MD05 list.
    Thanks in advance.

    Hi Vivek,
    I am not knowing how to upload the details.
    Please find the Material master details for the issue material:-
    MRP type- PD, Lot Size - ZE - Period lot size, Sched.2, Split ( Config Setting of this lot size key is provided below),
    Minimum lot size-2,000.000, rounding profile-2,000.000, Material type- ROH,Safety Stock - 1224, Pld Delivery time -63 days, GR Processing time- 2 days, Planning Calendar-ZEX.,Consumption mode     2,Bwd consumption per. 999,Fwd consumption per. 999 ,Mixed MRP --      1, Strategy group =      Z1 ( Final assembly & assembly level, i.e., combination of 40 + 70))
    Config Setting of Lot size key- ZE are :-
    LotSizeProced.  P Period lot-sizing procedure ,Lot-size ind.-   K Period lot size as in PPC planning calendar
    Scheduling  --    2 Period end := delivery date ,No. of periods  1, Splitting Quota - Checked ,Last Lot Exact- Checked.
    b) Scheduling Agreement has 3 delivery schedule lines with Delivery Date as "10/04/2011" and scheduled quantities as 2000,1617 and 2000 EA.
    As per the MD05 screen,for this material, corresponding to these 3 schedules lines, we have exception message -30 with different delivery dates. Our Question is why MRP does not updated the Delivery dates for the schedule lines in the scheduled agreement proposed by these exception message.
    Can you please let me know whether this information is sufficient for you to understand my problem?.
    Thanks in advance.

  • MRP is not generating any schedule line in my vendor's scheduling agreement

    Hello all,
    My question is: why the MRP is not generating any new line in my vendor's scheduling agreement?
    This is the scenario:
    I have created a vendor's scheduling agreement with transaction ME31L
    I have created a customer's scheduling agreement with transaction VA31 and those characteristics:
    - Forecast scheduling lines
    - JIT scheduling lines
    - MRP to DS type assigned to type C: Requirements according to forecast delivery/Deliveries according to JIT
    I have run MRP with transaction MD01
    MRP is generating some purchasing requistions, not purchase orders because we have set up a release strategy which requires 2 approvals, but those purchasing requests are not generating any new line in the vendor's scheduling agreement.
    Any idea why it could be? Please do not hesitate to ask for further explanations. Thank you

    Hi,
    Check if stock is available for the material in that plant.
    Also check the requirement date for the material and compare it with the planning horizon for that plant.
    Check your material master MRP view.
    Create source list(for material and plant in question) with MRP indicator 2.
    Thanks and Regards,
    Maheshwari

  • Scheduling agreement MRP run

    Hi All,
    We use Scheduling agreements for purchasing spare parts. The nightly MRP run checks the warehouse requirements and creates delivery schedule line to scheduling agreement.
    Now the MRP run creates unnecessary delivery schedule lines to scheduling agreement if the earlier created delivery schedule line's delivery date has been changed manually.
    Today the MRP run finds requirement for article XYZ and creates the delivery schedule line, where delivery date is 2.9.2008 (determined from articles basic data).
    The Vendor confirms the delivery date as 3.10.2008 and the purchaser changes manually  (transaction ME38) the delivery date to delivery schedule line accordingly and prints the created message.
    The next MRP run creates new delivery schedule line, where delivery date is again 2.9.2008.
    After that there are two open delivery schedule lines for article XYZ with delivery dates 3.10.2008 and 2.9.2008.
    Why the MRP run does not notice the existing delivery schedule line with the new delivery date 3.10.2008?

    issue resolved

  • MRP Generating Purchase Reqs for Materials Needed in 2013

    Hi, all.  We're running MRP and it's generating a massive amount of purchase requisitions (18,310 to be exact).
    The following is a typical part setup:
    Lot size = EX
    Planned delivery time = 5 days
    GR processing time = 2 days
    Individual/collective requirements = 1
    MRP profile = BTO
    We have one existing sales order with a delivery date in 2014.
    With a lead time of roughly a week, why is MRP generating purchase requisitions out into 2013 for this material??
    Thanks!
    Sarah

    Sarah,
    MRP Profile doesn't mean much to us, they are all created individually during each implementation, and they are all different.  However, I will guess that BTO is some type of Make-to-order profile.
    You mention 18K of PRs.  Are these all being created in a single run, or is it possible that they may have been accumulating for a while?   To find out, run MRP, but using the parameter for Planning mode 'Delete and Recreate planning data'.  It will delete all the unfirmed PRs and then regenerate new ones based on the current situation.  I will assume for the moment that all these 'future' PRs are unfirmed, please let me know if they are not.
    Since it appears to be a MTO environment (if not, let me know) then you should be able to see in the planning segment which requirement (sales order) is driving the purchase reqs.  Depending on your MRP type, this could give you understanding of why MRP is proposing so many PRs.
    One thing that will generate a large number of purch reqs is an unrealistic value in Maximum Lot size (MRP1 page of material master).  For instance, for a requirement of 1000 widgets, and a max lot size of , say, 2, it would generate 500 PRs for 2 widgets each.
    If my suggestions don't help you, please specify MRP Type, Lot Size, max lot size, rounding value, Safety stock, reorder point, Strategy group,   From these values we can begin to understand your problem a little better.
    Rgds,
    DB49

  • HELP - MRP and Stock in subcontractor!

    Hello SAP gurus,
    I have a little problem with MRP and the stock in the subcontractor.
    This is the scenario:
    PLANT..........MRP ELEMENT..........QUANTITY
    2100.............Free Stock..................500UN
    2100.............Reser..........................700UN
    2100.............PurRqs........................200UN
    And I the stock in the subcontractor for the same material is 300UN...
    Why is MRP creating a PurRqs instead of a stock transfer from subcontractor.
    The Scope of check is considering subcontractor stock...
    Can you please help me?
    Thanks in advance,
    Adelmo Silva

    Hi,
    As i Know MRP will  not Consider , the Stock Available at Subcontractor. During the Net requirement calculation it will consider teh stock available at Plant. That is why it would have created PR.
    During material Availabilty check it will consider as per settings at Scope of the Check.
    One more Option is MRP area for the subcontractor , for More details please refer below SAP help.
    [MRP area for the subcontractor |http://help.sap.com/saphelp_47x200/helpdata/en/2f/690bc4068811d2a6c80000e83235d4/content.htm]
    Pradeep

  • Alternative Item with %0 still planned with qty 0 by the MRP

    Can somebody explain me why the MRP manage also the Alternative Item MAterial with % 0.
    Why the MRP do it?
    There is any setting that I can do in SPRO to fix it, or better to let the MRP recognize the item in alternative and check the usage probability if it 0 what I expect is that I do not find into my planned order the material with % 0 but only the one with % 100.
    Thanks

    There's a good reason that it is in the planned order, and later in the production order with quantity 0.
    100% is for planning, meaning that in MRP this is the material that will be procured.
    But now, in the ProdOrd, when you perform an availability check and there isn't enough of it, the system will look for available stock in the alternative item, and commit it if so. This is the whole point.
    For that, and for the information that this material has alternatives, the system is showing the alternative materials with quantity 0 in the order. (if I remember right they all have the same line item number)
    Regards,
    Mario

  • Mrp area not determined

    Hi experts,
    I ahve created a sale order while creating it show the error mrp area is not determined.
    pls guide me how to resolve it.
    I enter and save it .
    the material is in stock and i created outbound delivery it is showing 0 st.
    I have checked all stock is available.
    pls guide me why this mrp area not maintaing message is coming while creating so
    regards
    arun

    Dear Arun
    Give us Message ID and Message number
    Take help of PP guy
    Please refer following for some help
    MRP with MRP areas for the material is not activated until the material has been assigned
    to an MRP area. If you have not assigned a material to an MRP area, that is, you have
    not created an MRP area segment in the material master, the material will continue to
    be planned in the plant MRP area only. If you have assigned an MRP area to it, the system
    can plan it in the plant MRP area and in the assigned MRP area.
    http://www.sap-img.com/pp010.htm
    Regards
    Jitesh

  • Scheduling agreement, unnecessary delivery schedule lines

    Hello
    We use Scheduling agreements for purchasing spare parts. The MRP run checks the warehouse requirements and creates delivery schedule line to scheduling agreement.
    Now the MRP run creates unnecessary delivery schedule lines to scheduling agreement if the earlier created delivery schedule line's delivery date has been changed manually.
    For example,
    Today the MRP run finds requirement for one article  and creates the delivery schedule line, where delivery date is 2.9.2008 (determined from articles basic data).
    The Vendor confirms the delivery date as 3.10.2008 and the purchaser changes manually  (transaction ME38) the delivery date to delivery schedule line accordingly and prints the created message.
    The next MRP run creates new delivery schedule line, where delivery date is again 2.9.2008.
    now there are two open delivery schedule lines for this article with delivery dates 3.10.2008 and 2.9.2008.
    Why the MRP run does not notice the existing delivery schedule line with the new delivery date 3.10.2008?
    we have changed delivery dates manually several years and this has never happened before.
    could you please help me to resolve this.
    Thanks in advance,
    Srikanth

    In addition to the above post,
    as you changed the date manually from 2nd to 3rd....
    so there are was no report for 2nd generated ulitmately...and if generated it was changed...right...
    so when you again run the mrp...the system will generate one more pr for the same article....
    this ultimately happens because of the set del dates in the MMR as i told above..
    Hope it helps..
    Regards
    Priyanka.P

  • Purchase Requisition not getting generated

    Hi,
    In month of April some requirement is given in MD61. When MRP is run, it is not generating planned orders for raw materials. This is because already someone has created manual Purchase orders for those materials.
    But system should not consider these Pruchase orders as these are of month july and august and NOT of current month.So system instead of considering raw material as available, it should create fresh planned orders for raw materilas for current month.
    Please guide if there is any customizing for it??
    Regards.

    Please read the answer of the experts and try to understand it before asking again.
    The reason why SAP won't create new PldOrd or PurReq in your case is:
    1. April; DepReq 200 pcs > - 200 pcs
    2. May; PO 200 pcs > + 200 pcs
    -200 pcs + 200 pcs = 0 pcs
    1. That's why from MRP point of view there's no problem with the quantity - the requirement is covered by the PO item.
    2. As far as the scheduling is concerned there's some problem because you need the goods in April but the PO is for May. That's why SAP gives an exception message after MRP run (check it in MD04 in the "Exception" column) that you should receive the goods earlier...
    So, please understand that qty is ok, scheduling is not ok. MRP gives an exception message that you have to negotiate with your supplier and procure the goods earlier than it was planned originally.
    But MRP won't create new procurement proposal (PldOrd / PurReq) since it would cause a balance different from 0. MRP can't change the requested delivery date on PO as well, since this depends not only on you but your supplier has to agree too.
    Regards,
    Csaba

  • PO item rejected  -- how to block requisition item automatically

    Hi SAP friends!
    Purchase order items can be rejected by vendor, IDOC ORDERSP. This leads to the PO being 1. deleted 2. Rejection Indicator is set and Order Acknowledgment Number is set ( REJ XXXXXXX). The corrosponding purchase requisition is opened again and new PO's are created by MRP.
    How is it possible to automatically update the status of the purchase requisition item and set it to Purchase Requisition Blocked in the situations when the PO item is rejected by vendor?
    Kind regards
    Lisbeth Schinelelr

    do you really want your vendor to decide if you have a request or not?
    dont you need this reopened requisition to procure that material at the vendors competitor?
    by the way,
    The corrosponding purchase requisition is opened again and new PO's are created by MRP.
    MRP never creates POs. MRP can create requisitions. But why should MRP do this in case your PR is reopened instead of deleted?
    You should rethink about this statement.
    MRP will probaby recreate the requisition if you would close the requisition with the Order response from your vendor, so why not reusing this PR instead of deleting and crating a new one?

  • Set PO item rejection indicator via IDoc ORDRSP?

    Dear experts,
    is it possible to set the rejection indicator in the purchase order item (EKPO-ABSKZ) via processing an order confirmation IDoc ORDRSP?
    I found nothing but SAP note 890812 where SAP proposes a workaround with manual setting of the rejection indicator.
    Our scenario is that the vendor sends an ORDRSP Idoc with action code 001 in segment E1EDP01-ACTION and a sales blocking reason in fields E1EDP01-ABGRU and E1EDP01-ABGRT. We already found a way to ignore segments containing these fields and process all other IDoc items, but it would be nice to set the rejection indicator automatically for these rejected items.
    We are on ECC 6.0 SP06.
    Any help is appreciated.
    Kind regards,
    Karsten

    do you really want your vendor to decide if you have a request or not?
    dont you need this reopened requisition to procure that material at the vendors competitor?
    by the way,
    The corrosponding purchase requisition is opened again and new PO's are created by MRP.
    MRP never creates POs. MRP can create requisitions. But why should MRP do this in case your PR is reopened instead of deleted?
    You should rethink about this statement.
    MRP will probaby recreate the requisition if you would close the requisition with the Order response from your vendor, so why not reusing this PR instead of deleting and crating a new one?

  • Issue regarding 0MATERIAL_ATTR  - Attribute not Updated for Some Materials

    Hi All,
    As per requirement, I had enhanced 0MATERIAL_ATTR DS with one customer field MRP Controller.
    After enhancing 0MATERIAL_ATTR, I had made necessary changes in related objects like 0MATERIAL Info Object & related transformation for this new attribute.
    After making changes, when I had done Repair full request for 0MATERIAL_ATTR, newly added attribute had not updated for all material, other attributes were updated correctly but MRP controller had not updated for some records.
    I am confused with why attribute(MRP controller) updated in some Materials & for some materials its not updated.
    I had checked in PSA, data for this added attribute is come in PSA but not updated in data target (0material).
    I had also activated master data by running Attribute change run but still problem persist.
    Please help.
    Regards,
    Divyesh Khambhati

    Hi Venkatesh,
    I had write code in CMOD for MRP controller.
    As data is coming fine till PSA but its not updated in Data Target (0MATERIAL) .
    if I take one example..
    For exp Material XYZ has two entries in PSA table, one is updated during delta load & recent one which come though Repair Full request.
    Now newly adder attribute MRP controller available in recent request of Repair Full but that is blank in case of prior delta update.
    I am confused because MRP controller attribute is updated for some Material but for some material its remain blank.
    please help.
    regards,
    Divyesh Khambhati

  • PDP - no entry in eprtrans

    SRM SERVER 550 SP13
    R3 4.7
    Classic
    Reorder point planning. When MRP runs and generates requistions the eprtrans table is not updated with the req. The req does have a procurement profile assigned in the eban table. The req is not subject to release and has a status of active.
    I can manually create a req with the exact same data and eprtrans is populated. I can also make a manual change to the MRP generated reqs and it shows up in eprtrans.
    This seems to be specific to MRP generated reqs. Dont need help on how to configure ext reqs transfer to SRM. that is working. need to understand why these MRP generated reqs are not populating the erptrans table despite having a valid procurement profile assigned. The manual reqs compared to the mrp reqs in the eban table. only field that has a difference in the eban table is creation indicator. for manual req that works creation indicator = R (realtime manual) and for the MRP req the creation indicator = B (material requirements planning). Every other field in eban is indentical.
    I'm at a total loss, seems to be some MRP setting or maybe bug. Any insight is appreciated.
    thanks in advance.
    justin

    I think the official SAP response is direct procurement is not supported in classic for any business scneario.
    We give SRM what it wants:
    Create Dummy account assignment
    Create dummy cost center
    You could actually use any cost object, but we made a copy of K as it best fit our needs.
    Basically during transfer we insert cost object, then when creating the PO from SRM we strip the cost object back out. I'm sure this can be done without creating dummy account assignments, as you know fico will push back on this request, but the dummy account assignment is useful as its unique to this process and can be used as a trigger.
    You need 3 badis to accomplish this.
    BBP_BADI_EXTREQ_OUT
    BBP_ACCCAT_MAP_IMP
    BBP_CREATE_BE_PO_NEW
    Its a little more tricky than appears on the surface, but I have done this exact development at 2 different customers and has been running at one customer for 2 years with no issues, and the other just a few months with no issues.

  • Dependent requirements not clearing up

    Hi gurus,
    I was wondering if someone could throw some light on this strange behavior. I tried to check all settings and it did not make any sense to me. we have a material A and material B. material A is the component in the BOM of Material B. We get sales orders for material B. I see in the document flow of sales order of material B that it was PGI'ed yesterday and we have MRP job NETCH that runs everynight. I do not understand why the MRP element with CUS ORD still shows up in MD04 for material B and as a result the dependent requirements also shows up for material A in MD04. what could be the problem. Oh and by the way we use strategy group of 52 on the material master for B.
    Any ideas?
    Thanks
    Ravi

    Hello Ravi
    Take a look on the following documents that I wrote about the most frequent issues on MD04:
    MD04: Problems with sales orders
    Frequent issues on MD04
    If the sales order itself is still displayed on MD04, you should try to run report SDRQCR21 to check for inconsistencies.
    If the sales order itself is not displayed on MD04, but the sales order special stock is displayed on MD04, you should take a look on note 1723507.
    If you still cannot solve the issue, please provide a screenshot of MD04.
    BR
    Caetano

Maybe you are looking for