Mrp area not determined

Hi experts,
I ahve created a sale order while creating it show the error mrp area is not determined.
pls guide me how to resolve it.
I enter and save it .
the material is in stock and i created outbound delivery it is showing 0 st.
I have checked all stock is available.
pls guide me why this mrp area not maintaing message is coming while creating so
regards
arun

Dear Arun
Give us Message ID and Message number
Take help of PP guy
Please refer following for some help
MRP with MRP areas for the material is not activated until the material has been assigned
to an MRP area. If you have not assigned a material to an MRP area, that is, you have
not created an MRP area segment in the material master, the material will continue to
be planned in the plant MRP area only. If you have assigned an MRP area to it, the system
can plan it in the plant MRP area and in the assigned MRP area.
http://www.sap-img.com/pp010.htm
Regards
Jitesh

Similar Messages

Partner determination functions are not determine in sales order

Dear Sap Gurus,
I have made a new partner function (P2) and have been configure it in partner determination procedure, although i hv made new customer master for the same account group. All th partner function are showing in the customer master data but these are not determine in sales order, one error is coming...this partner procedure is not defined.......kindly give me advide how to resolve this problem.
Regards
Parul Deshwal

Hi
Have you assigned the Partner determination procedure to your sales document type?
Also have you assigned the Partner function to your Partner determination procedure.
Also do the same to the sales order item partner determination
regards
Prashanth

Business area not determined for line item?

Hello All,
I am trying to create a sales order. When I enter a line item and enter plant for the item, it gives me an error "Business area not determined for the line item #" and it does not accept the item.
I have already checked in the enterprise structure in IMG that the business area is defined and assigned for this plant.
Is there anything else need to be done? Do we have to define or assign the business area in material master?
I would appreciate if somebody can answer.
Thanks.

There are three rules for determining a business area:
o   Rule 1: plant and division
o   Rule 2: for each sales area
o   Rule 3: for each plant and item division
See what you are missing

Door and staging area not determined automaticaly in IBD

Dear All ,
Kindly guide as Door, staging area determination is not happening automatically after inbound delivery creation.
currently assignment is being carried out manually , Attached screen shots for your kind perusal.
Thanks
Jinoy

Please do the following
Define Staging Area and Door Determination Groups
SPRO ® EWM ® Master Data ® Staging Areas ® Define Staging Area and Door Determination Groups
SPRO ® EWM ® Master Data ® Warehouse Door ® Assign Staging Area/Door Determination Group to Door
SPRO ® EWM ® Master Data ® Warehouse Door ® Assign Staging Area to Warehouse Door
SAP menuà EWMà Settingsà Shipping and Receivingà Access Sequence to Staging Areas and Door Determination)
SAP menuà EWMà Settingsà Shipping and Receivingà Staging Area and Door Determination (Inbound)

Values of Formula Variables are not determined

I have created a Purchase Order for services where the quantities for services line items are determined on the basis of predefined formulas. Values for all the variables are provided in PO and quantity is calculated on the basis of those values. When I try to adopt the services during the creation of Service Entry sheet with reference to PO, system shows the below error message:
Please enter a value for variable(s) NO OF PERSONS (Form.Val.1)
Message no. SE252
Diagnosis
You wish to have the system determine the quantity using a formula but have not entered any values for the variables in the formula.
Procedure
Maintain the values of the variables.
Example
For example, in a formula for calculating a volume, specify the values for the variables "length", "width", and "height".
The values of formula variables are not adopted from the PO. Please suggest the solution or possible cause of error.

I have gone through the note you suggested. But in my case each variable is created with specific name and assigned to the formulas.
The formulas are getting adopted in RFQ but not in service entry sheet.
Edited by: abapuser on Dec 21, 2010 6:46 AM

PR in MRP Area not appeared

Dear SAP Guru,
hi, i have a case if anyone can help !
i have material X with MRP area R0001 (Vendor 0001) with plant A, when i run MRP .. PR exist in MRP area R0001
but when i change MRP area into R0020 (Vendor 0020) and set deletion flag MRP area R0001 (vendor 0001) and run MRP
the result not in MRP area R0020 .. but in plant level MRP area that's MRP area A
why the result not int new MRP area R0020 ? can anyone help this issue
thank you
Regards
Budhi
Edited by: A_Budhi_P on Oct 27, 2010 5:46 AM

Hi
For the Material X
=========================================
You have Created the new MRP AREA >>>>> R00020.
Also, you mentioned that, deletion Flag is set for the Old MRP AREA >>>>R0001
=========================================
After Creating this New MRP AREA>>>R0020,
1) Did you assigned this New MRP AREA >>.>R0020 in the Material Master (MRP1 ) for the material X ?
2)When Running the MRP,
you have to run the MRP with the MRP AREA>>.>R0020. Means, you have to enter the following
Material : x
MRP AREA : R0020
Plant : Plant Code
Then run the MRP
In this case you will get PRs, against the requirements of the Material x, For the given MRP AREA>>>R0020
Please check & revert
Regards
BRSR

Pre defined set types are not determined in CAtegory

Hi all,
when i try to create a category for a service product for SLA, the pre defined set types are not getting populated for me.
I have created a new hierarchy, assigned to product and product type.....
but still when i create a category the list of predefined some of the predefined set types are not getting displayed.
Can anyone help this issue.
kindly advice in this regard.
Thanks,
Subhashini.

Hi,
Thanks for the reply.
I have assigned the product type service in the category.
This is the only custom category available. only one std category has this set types. other than that nothing is there in the system.
is there any services that has to be activated or any authorization that is missing for me...
nut i have sap_all...could not able to trace out the problem.
kindly guide.
thanks,
Subhashini.

Free goods are not determining access sequence like......

HI,
What could be the reason free goods determination is not happening with access sequence like sales orgPlantmateril. At the same time freee goods are determiing at customerMaterial level. I have generated new access sequnece like sales orgPlant+material and assinged and configured properly. Also maintained condtion record accordingly. Is there any programme error or need to apply any SAP note in this regard.
Do reply on this reasonbly.

Hi gridsleep from somewhere,
I presume you visit the US music Store. As far as I know that Music Store is the only one to offer free songs. The CC information is needed to verify you're in the US of A.
I for example can't buy from other Stores than the Dutch one.
The deal with the record companies/right holders don't allow cross-border sales. The same is true for free songs (I can't get them).
That's why they need the CC information.
Hope this helps.
M

Business Area not determined in batch posting.

Dear SAP experts,
My client is on 4.6c system. Till now they were not using business area. Recently we have activated business area balance sheet. While posting FI document manually using FB01, business area derivation happens correctly on vendor/customer/balance sheet line items. However, when same document is posted via bdc session, business area derivation is not happening. I also tried to manually simulate bdc session. Still no derivation happened. Any suggestion/solution will be highly appreciated.
Unit.

Hi Jayesh,
How system is deriving business area in case of vendor/customer when you are doing FB01. Means its through some substitution rule or some default value.
Regards,
Ankit Agarwal

MD04 - Subreq - Storage location MRP area

Hi all,
I have an issue of Subreq in MD04 which is not assigned to the the good MRP area.
I'm explaining :
Business process
   -> I work with a subcontractor
        case 1 : either I buy raw material to be processed and delivered it directly to my subcontractor
        case 2 : either I send raw material from my physical stock to my subcontractor
   -> I create subcontracting purchase order with indication as components, the raw material.
   -> In case of the components are already in my subcontractor (case 1), the reservation (Subreq) should not consume my physical stock.
   -> In case of the components are in my physical stock (case 2), the reservation (Subreq) should consume the physical stock.
Solution choosen
Then I decided to create a storage location MRP area : "EXTERN" as External.
I assigned a storage location "EXT" to this MRP area.
I assigned this MRP area to the material in MRP1 / MRP Area.
In the purchase order, in the components popup,
For case 1 : I assigned "EXT" as Prod.Stor.Loc and Supply area
For case 2 : nothing special is filled
Issue
For the case 1, althought I assigned the storage location "EXT", the Subcontractor Requirement is not attached to the good MRP area.
WHY?
Remark : I didn't use the subcontracting MRP area because I would like to have 2 cases : case 1 & case 2.
Thank you in advance for your help about this problem which make me nervous !

Hello Catherine
Your system is working as designed. The following note explains the system design in more detail:
503497 - Subcontracting and MRP areas
Take a look on the relevant information provided by this note below:
Reason and Prerequisites
The most important point to understand the system behavior is the fact that the withdrawal of the (subcontracting) component is generally carried out during the goods receipt for an SC procurement proposalfrom the subcontractor stock that is managed at plant level from an inventory management point of view and that has no reference to a storage location at all.
This causes that subcontractor requirements can never enter a storage location MRP area, since you can later not post the withdrawal from this MRP area.
Thus SC-requirements always enter the SC segment of the plant MRP area or the SC-MRP area.
The SC MRP area in turn is supplied by stock transfer reservations from the plant MRP area or via third-party order processing through procurement proposals with goods receipt directly to the subcontractor. A supply through the materials planning from a storage location MRP area is not possible.
For the above reason, SC-requirements do also not carry any storage location, since the storage location does not have any control function at all for SC-requirements:
You cannot and you should not determine a storage location MRP area (see above), and the subcontractor MRP area is determined via the vendor of the procurement proposal, thus it is independent of the storage location.
See also Note 376050 on this topic that makes a modification available which prevents the deletion of the storage location in the subcontractor requirements, so that you can use, for example, customer-specific reports to analyze the storage location.
Please observe that the mentioned modification note 376050 only makes the storage location available on table RESB, so that you can use it on custom report. This modification will not make the storage location to be considered by MRP or on MD04.
BR
Caetano

Condition Type NAVS not determined for Goods PO

Hi all,
I am working on SRM 5.0 and R/3 4.6C.The problem im facing is for the tax condition determination for PO for Goods type which replicated from SRM to PO .
In case of Service PO,the conditions are determined correctly and can be seen in the PO print out.However In case of a goods PO,if i goto conditions tab in ME23N for the PO,the conditions (NAVs) are not determined as well as they cant be seen in PO print .
The config on R/3 side is Correct as in case of manual PO(PO created directly in R/3),the conditions are determined correctly.
Now when i debuuged the BAPi "BAPi_PO_CREATe1",i observed the following:
If i chnage the field PO_PRICE in the table POITEM to "1",then conditions are determined corretcly for the PO.However by dfault,the value for this field comes to "2".
This field is nothing but indicator of the price i.e. 1 for Gross and 2 for Net.
Can anybody explain me the link between this price and condition types determined in PO.
Thanks.

Check out SAP Note 580225 - Purchasing BAPIs: Conditions and pricing
Hope it helps

Plant & Duties are not flowing in Sale Order

Dear experts,
i have an issue in CIN.when i am creating a sales order, plant is not determining automatically,when i am trying to enter plant manually in line item the excise duties are not determining in pricing procedure even though i have maintain condition records for combination of Plant&Control code.(i have maintained control code in material master also) Please reply.
Message was edited by: G Lakshmipathi
Make use of the subject effectively

First have you searched SCN as to how a plant would be determined in a sale order? If not, search and close that issue. Now coming to excise duties, since you entered the plant manually, you also need to click the Update button in condition tab and again double click on "G". Once plant flows automatically, then this issue would also be addressed. If not, post here.
G. Lakshmipathi

How to run MRP only for MRP area ?

Dear Gurus,
I am going to run collective MRP only for one MRP area, not for whole plant. How to do it?
MD03----is only for one material.
MD01----is at plant level
Thanks in anticipation.
Jason
Edited by: Jason Ma on May 6, 2008 4:44 PM

Can you be more specific?
MD21 - Display Planning File Entries? Is this related to MRP run and how?

The agents are not getting determined

Hi Gurus,
In the standard workflow WS00300022 with BUS 2104 for Approval of Appropriate request, the agents are not getting determined.
Below are the steps followed:
We have created a subtype for BUS 2104 and redefined the display and edit to add some new functionality. Delegated the business object and followed all the standard steps. Now the present situation is that the Workflow is not able to determine agents.
We have even removed the subtype and checked with the standard functionality but still it is not determining the agents.

Hi,
Kindly Diagnose your WF:-
Use the following transaction:-
1> SWE4/SWELS -> EVENT TRACE ON/OFF (Switch On the Event Trace)
2> SWEL -> DISPLAY EVENT TRACE
3> SWUD -> WF DIAGNOSTICS
4> SWPR -> WORKFLOW RESTART AFTER ERROR
Enter the WF Number and Click on the LOG Icon.
There you can see the Graphical Log of the WF to know where the WF is stuck.
And You can also check the Technical Details of the WF there, to find which WF Container has what value.
In the LOG, you can determine the step where it is unable to determine the Agent. That will give a picture of how to proceed further and what is the WF status at that point.
Kindly check and revert back, so that a solution can be provided.
Regards,
Kanika

Schedule lines are not getting generated during MRP Run

Schedule lines are not getting generated during MRP Run. I have maiantained source list for the material with proper validity date and also maintained scheduling agreement . MRP relevvant Indicator , I have marked - 2 which means -Record relevant to MRP. Sched. lines generated automatically.
Still I am not able to get schedule lines and instead of that *Purchase Requisitions* are getting generated.
Can any one help me and suggest me what to be done in this case .
Thanks & Regards ,
Nirmalya

Dear,
Welcome to SDN,
In transaction OMDT you have to enable the indicator create schedule lines
In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
If u run MRP properly u will get schedule lines automatically in ME38.
Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.
Regards,
R.Brahmankar

Mrp area not determined

Similar Messages

Maybe you are looking for