Why no voice on my videos on my iPad ?

Why is there no voice on my iPad when I play my videos? I had voice before.

Are these music videos in the Music playlist folder as I had this problem i.e. picture no sound. I resolved it by opening the same music videos in the Videos folder and they played sound as well.
I don't know why this occurs but it's only since the latest software update,hope it helps.

Similar Messages

  • Why doesn't my imbedded video play on iPad?

    Why doesn't my imbedded video play on iPad?

    Is it running flash? Because the iPad 2 does not run flash. Or it could be a bug in the embeded video. Run the debugger and see if that helps. Good luck :-)

  • Why do i not have video on my ipad any more?

    I went to record a video today, my ipad has been update 2 x in the last month, my video is not working. How do I make it work thank you

    Try a reset ...
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    No data is lost due to a reset.
    There's a free iPad video training app >  iTunes - Easy iPad Video How to

  • Why can't i delete videos from my ipad mini 2?

    Hi,
    I'm running out of space on my iPad mini 2, 32gb, ios8.1.2. I want to delete some videos I shot on holiday last year, so I can make some more this year.
    In the camera roll, I hit select, select the vids to delete, but the trash can icon goes grey (inactive) instead of blue (active). Deleting photographs is not a problem.
    These films are not on my Cloud drive. I copied them onto my laptop - for editing purposes and backup. They are in a sub-folder in Movies, not in iTunes, as far as I can tell.
    This doesn't explain why they are still on my iPad, despite all attempts to delete them!
    Please help -  I dare not shoot more vid until I know I'll be able to get rid of it!
    thanks
    James

    Hi ayliffesmith,
    Is it possible that these videos are being used in an iMovie for iOS project? That would cause it to be impossible to delete them. See this article for how to complete the deletion -
    iMovie for iOS (iPad): Delete a video clip from your device
    Thanks for using Apple Support Communities.
    Sincerely,
    Brett L 

  • Why can't I watch videos on my iPad

    I got to safari and Crome and none of them play video

    Depends on the video format, and the website design. If the videos are delivered in flash, no you won't be able to watch them unless you download an app designed to transalte flash video such iSwifter.
    You might check the app store to see if the sites you are using have apps available.

  • Why can't I edit videos on my iPad?

    So I have imported videos from my canon 70D into my new iPad Air 2. I can trim and do everything I need in iMovie but every other app does not support my videos for some reason. Is there a way I can format these videos so the apps will recognize them? I've tried almost every app and iMovie is the only one that works. I really want to color grade these clips.

    Depends on the video format, and the website design. If the videos are delivered in flash, no you won't be able to watch them unless you download an app designed to transalte flash video such iSwifter.
    You might check the app store to see if the sites you are using have apps available.

  • Why can't I watch videos on my ipad since 7.1.1 update?

    For some reason since the latest update I can't watch any videos at all. Just checking to see if anyone else has this issue.

    Try reset all settings
    Settings>General>Reset>Reset All Settings
    Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing, Wall Paper, Sound etc will be reset

  • Why can't I watch videos on my IPAD since going to IOS6?

    Since I went to IOS6 I can no longer watch any type of video. YouTube, Facebook, Netflix, abc Player. Yes, I did update Netflix but it didn't help.
    I would appreciate any help.

    Try reset all settings
    Settings>General>Reset>Reset All Settings
    Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing, Wall Paper, Sound etc will be reset

  • QoS - Why DSCP AF-41 for Video

    Guys,
    I wanted to ask the forum one question why DSCP AF-41 marking is used for Video. I know Cisco designed and recommedded it in that way, but is there any other technical reason behind it?
    Cheers,
    Sugata

    Hi Sugata,
    Firstly as you may know already, traffic marking are done to classify traffic into different classes according to the priority so that they are meted with a different behaviour. It ensures smaller and critical traffic does not get stuck behind bulkier traffic which may not need priority.
    Among the real time traffic, audio is the most critical. The Cisco recommended markings are according to the priority of the traffic type. Voice has a higher priority than video. Video is further separated into two categories - Interactive (Video conferencing etc.) and Streaming (playing a unicast or multicast video). The order of priority and reason for that is below:
    1) Audio - Voice traffic is very sensitive to packet loss, latency. It requires no packet loss and latency of about 150 ms.
    2) Interactive Video - Sensitive but can tolerate packet loss of about 1% and latency almost same as voice
    3) Streaming Video - Less sensitive - can tolerate about 4-5% packet loss and latency of about 4-5 seconds
    So it’s a general guideline\standard from Cisco to mark voice with a dscp 46 or ef, Interactive video 34 or af41, Streaming video as dscp 32 or cs4. Since this is Cisco recommended best practise, Cisco's most UC apps by default mark the traffic like this.
    You can change it but strongly not advised unless you have a very good reason. Another reason not to change is some of the auto templates etc. you can normally use at access level catalyst switches use these markings, which otherwise you will have to manually change the mappings etc.
    Hope this clarifies - if you have any further questions please feel free to ask.
    Terry

  • Can't hear the voices in a video

    I edited a video in adobe premiere elements 9 and I used noise reduction and the transition "constant gain" on the audio. I then uploaded the video to youtube. On my Dell computer and on my ipad, I can hear peoples' voices in the video fine with or wihout headphones. However, I cannot hear the people speaking in the video on my iphone when the headphones are not plugged in (I can hear the sound on my iphone when the headphones are plugged in). Other videos work fine on my iphone, so I'm wondering if something went wrong when I was editing in premiere. Does anyone have any suggestions?

    When I go to the window menu and select audio mixer, I get 0.0 at first. When I hit play, the greenish bar goes up and down as the people in the video speak, so the levels change constantly (sometimes -6, sometimes higher, sometimes less).  I generally set the volume level at 0.0, but I raised the volume a bit and lowered it a bit at certain spots. The odd thing is that I can hear the voices on most devices, just not on an iphone with the headphones not plugged in. However, other videos work fine on the iphone without the headphone so that's why I don't think it's the device. Other video I've edited work fine on the iphone too, but maybe I made an odd editing mistake this time. I did use an external mic for the video, but I don't know if that should make any difference since I can hear the voices fine on the computer....

  • Record Level Adjust for Audio in Voice Memo or Video Recorder

    I would like to request that Apple allow me to adjust the record audio volume level when recording in Voice Memo or Video Recorder modes. Often I find that the audio is distorting and most times I cannot step back far enough to avoid distortion levels. While I love the ability to SEE the audio level in Voice Memo mode, I am hoping that it is only a matter of firmware upgrade to be able to ADJUST the record level.
    Also, if it is possible, it would be great to see some indication of audio level when recording video... something simple like a bar graph with green, yellow and red bars with the highest level reached sticking for a few seconds so that I can tell what the level is.
    An alternate solution (if none of the above is possible in a firmware update) would be to automatically adjust the recording level to prevent audio distortion.
    Thanks for the great iPod and here's hoping for a great firmware update in the near future!

    Thanks, I've submitted my recommendation to Apple.

  • HT1454 why i can not get video out from my ipod touch after i did the upgrade

    why i can not get video out from my ipod touch after i did the upgrade

    why i can not get video out from my ipod touch after i did the upgrade

  • Why can't i open video file in photoshop cs5?

    why can't i open video file in pts cs5?
    i've already installed quick time but when i open video file, it appeared this
    can you help me with this problem please?
    ps: sorry for my bad English ToT

    We need to know the exact source of the file and what system you're on. Could simply be an unresolvable compatibility issue/ unsupported format.
    Mylenium

  • Why doesn't Lightroom organise videos/photos lacking "date taken" by "date modified" instead of "date created"?

    This still seems to be a problem with Lightroom 5. This post is one of the top results after trying to Google this problem, and it's for LR3. I can't understand why something so fundamental to video (and some photo) organisation has been overlooked for so long.
    I've been trying to import and organise all my old photos and videos by date with LR5. They've been backed up and copied many times over the years, most recently to an external drive last week. So every file has a "date created" of last week. But "date modified" remains the original recorded date.
    This doesn't matter for photos with a proper EXIF "date taken" - but LR5 looks at the "date created" for videos, making it completely useless for organising them into date-based folders. It puts videos I recorded in 2010 (as per "date modified") into a 2014-12 folder. Why.
    It's not just a video problem - some photos I took with devices that didn't record EXIF "date taken" are also filed into folders from this month, even though the "date modified" on them is correct as being from 5 years ago.
    How can I rely on LR5 for importing and date-based organisation when it relies on files (lacking "date taken") having never been copied or backed up?

    Hello,
    I use exiftool to modify the  Creation and Modification time of the files. After that I use LR "Ajust time" feature to set the time of the movies in LR to the file creation time (last point). This works fine for me.
    For MOV (Quicktime):
    exiftool "-FileModifyDate<TrackCreateDate"  "-FileCreateDate<TrackCreateDate"
    For AVI:
    exiftool "-FileModifyDate<DateTimeOriginal"  "-FileCreateDate<DateTimeOriginal" *.avi
    Depnding on your camera (and container format mov, avi) you may also ajust the time zone, e.g.
    exiftool -FileModifyDate+=1 -FileCreateDate+=1 -if "$CameraModelName =~ /EOS 600D/i" *.mov
    Which time in the container (MOV, AVI) you use as source, depends on your workflow. I edit my mov files before import. Therfore "CreateDate" is the time when I edited the file. Quicktime and (some) avi file contain a time when the containing stream was created. I use this vaule as source.
    exiftool <filename> gives you detailed information about all available times.

  • I'm having problems uploading video taken with my iPhone 4 to Photobucket.  FB will not accept the file extension which is ex. IMG_423.  They will play on my computer and will upload to Facebook.  Why is the phone taking video with this file instead of so

    I'm having problems uploading video taken with my iPhone 4 to Photobucket.  FB will not accept the file extension which is ex. IMG_423.  They will play on my computer and will upload to Facebook.  Why is the phone taking video with this file instead of something like .mov or mp4.  How can I change the extension after the fact and avoid it in the future?

    You said, "the 4 also has signal and wifi whereas the 5 has only wifi". By "signal", I'm assuing that you mean cellular signal. If so, that means your iPhone 4 is still active on your cellular number and your iPhone 5 is not. Contact your carrier to sort out which phone is active on your account.

Maybe you are looking for

  • IPod is recognized by iTunes but songs won't show up on device

    I bought a brand new 32gb ipod touch 5th generation last weekend. I put about 8gb of music onto it. the music displayed under the "on my device" section of my ipod in itunes however when i disconnected my ipod the only songs on it were ones that were

  • Can't Get Photostream To Work

    Just bought my second Apple TV to add in my house. I've got one already running and my photostream is working perfectly but for the life of me I can't get this new one to work with my photostream. I HAVE TRIED EVERYTHING! 1. RESET APPLE TV 2. POWER O

  • Crossdomain.xml Not Working

    Ok, so first off, my environment. I'm working on a flash application that resides on the web server (192.168.1.74) and the data its pulling is from a device (192.168.1.77). On .77 I have a crossdomain.xml. I have attached the crossdomain.xml file. Th

  • How to delay the license days in XI-NW2004s?

    I have successfully installed the XI-NW2004s,but only used in 30days. I think I can adjust time back to setup day to use longer. To my disappointed, there were many j2ee service failed in Visual J2EE administrator. How to delay the license days in J2

  • Linkification (any version) does not work with FF9.0.1. Here we go again! Same old problem. Why don't you guys develop a permanent fix??!!! Don

    Here we go again. Same old problem with FF updates. FF9.x.x will not allow clickable internet links. They are dead when typed. ALL IE versions have clickable links BUILT IN! Why can't you do it??? Don't blame it on "third party add on incompatiblity.