Why not put all VMs and replicas in the same default folder?

By default, VMs are stored in \hyper-v\vm and replicas are stored in \hyper-v\replica\. So, when you failover, your new mission-critical VM is located in the replica folder. This is confusing and
its a pain to move the replica back to the default hyper-v\vm folder.
Comments and suggestions welcomed.

It's your system. Do whatever you want to do.
But Replica is meant for DR. Most people wouldn't consider running out of the DR facility to be a permanent situation. I suspect they'd rather know at a glance whether or not they're dealing with an original or a replica.
Eric Siron
Altaro Hyper-V Blog
I am an independent blog contributor, not an Altaro employee. I am solely responsible for the content of my posts.

Similar Messages

Why are there different specifications and SKUs on the same model window air conditioner?

Hello, The Best Buy website has a Frigidaire Home Comfort 12,000 BTU Window Air Conditioner - White Model: FFRE1233Q1 SKU: 6060171. In the Specifications next to "Energy Star Certified" it says "No" and doesn't show the EER. The picture of the unit shows an Energy Star emblem in the upper, right of the unit.
The website also has a Frigidaire Home Comfort 12,000 BTU Air Conditioner - White Model: FFRE1233Q1 SKU: 8274079. It also states in the Specifications next to "Energy Star Certified": "No" yet shows the EER as 11.3. The picture of the unit also shows an Energy Star emblem in the upper, right of the unit. Both units are in the section "Best Buy/ Appliances/ Heating, Cooling & Air Quality/ Air Conditioners/ Window Air Conditioners/ Product Info".
The Frigidaire website shows a Frigidaire 12,000 BTU Window-Mounted Room Air Conditioner FFRE1233Q1 and states Energy Star Certified": "Yes" and says the EER is 11.3. The picture they show looks to me like the same picture on both pages I've referenced on the Best Buy website and also shows an Energy Star emblem in the upper, right of the unit.
Can you possibly tell me what the difference is between the 2 units on the Best Buy website and the Model FFRE1233Q1 on the Frigidaire website? Thank you.

Hello agreatcompany,
This is certainly bizarre! To my knowledge, it seems that these are the exact same unit, so there wouldn't be any differences. It is possible we were doing some modifications to the information on this unit, and ended up changing the SKU, causing 2 to exist, which may explain why you were able to see both on BestBuy.com at one point. Presently, it would seem the only SKU available on BestBuy.com would be SKU 8274079.
In regards to the specifications, we receive all of the information from the vendor. With that said, I do see that this model appears to be Energy Star Certified according to Frigidaire's site, yet we do not have it listed as such. Please know that I am bringing this issue to the attention of the appropriate teams to have it reviewed, and any errors corrected.
If I should be provided any alternate information in regards to the two SKUs, please know that I will update you right away! If you should have any questions, please let me know.
Regards,
Tasha|Social Media Specialist | Best Buy® Corporate
Private Message

When a document is a scanned PDF and converted to word some of the words and paragraphs are randomly a shade lighter when printed. You can (barely) see it on the screen but it is different. All font and design are the same. Any suggestions?

The lighter shading has been a problem when printing the documents. You can barely see it but it is there????

Hi Notary,
I saw something similar with my 4 TB Promise SmartStor NAS after I upgraded to Lion. Only, I had ALL of my iTunes library on the NAS and one day, about a week after the upgrade I finally tried to play music with iTunes, but it kept throwing up an error just like the one you're seeing. I searched around for a while and finally found some steps that fixed the problem.
I found this solution at another site (can't remember which) that gave credit to this site:
http://www.alexanderwilde.com/2011/04/os-x-lion-connection-error-with-afp-and-wo rkaround/
Here are the directions I cut-n-pasted into my little notes file:
1) Launch the Terminal app
2) Run this command:
sudo chmod o+w /Library/Preferences
3) Run this command:
defaults write /Library/Preferences/com.apple.AppleShareClient afp_host_prefs_version -int 1
4) Restart your computer
5) From Finder, select an AFP server, or use “Connect To…”
This will cause the AFP Client to create the full preferences file
6) Launch the Terminal app again
7) Run this command (all on one line, make sure double-quotes are simply double-quotes from your keyboard, not pasted from the web as up and down quote marks) (yes, some of the spelling looks weird):
sudo defaults write /Library/Preferences/com.apple.AppleShareClient afp_disabled_uams -array "Cleartxt Passwrd" "MS2.0" "2-Way Randnum exchange"
8) Run this command:
sudo chmod o-w /Library/Preferences
9) Restart your computer
To disable this hack, run this command (all on one line, make sure double-quotes are simply double-quotes from your keyboard, not pasted from the web as up and down quote marks):
sudo defaults write /Library/Preferences/com.apple.AppleShareClient afp_disabled_uams -array-add "DHCAST128"
I hope that helps. If not, sorry for the ludicrous-long reply.
Andy

Can not connect to printer and internet at the same time

I use my airport to connect to the internet via the ethernet port. Internet was working fine until I connected my printer to airport via its USB port. Now the printer works fine but I can't connect to the internet using the same connection.
I can still connect to the same server using its wireless service, but I have to keep hitting the drop down list in the menu bar to select that connection. Can't I just keep connected to the same connection without having to switch back and forth? I thought these mac products were supposed to be all user friendly... I don't have time for this.

The only way to print and use the internet (or university network) at the same time is to do one of the following:
(1) Connect the printer via USB to your computer.
(2) Connect the AirPort Extreme base station (AEBS) via Ethernet to the university's network and then configure the AEBS to act as a bridge (not sharing a single IP address).
The AEBS can NOT wirelessly join the network.

How can I put report parameters and report on the same page?

I want to have a page that has user input (text fields, checkboxes, radio buttons, etc.) at the top of the page, with a submit button. When the user submits the page, I want the resulting report (returned from a query) to display below the input area.
With ASP or JSP I would write a page with a FORM at the top, with the ACTION submitting to the same page. If the ASP/JSP detects it was submitted (by looking at the request URL or form parameters), it queries the database and displays the report; otherwise it doesn't query the DB or show any report.
How would I do this with with portlets?
Thanks!

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Hui Zeng ([email protected]):
1. Create a form using the Appbuilder
2. build a report
3. create a dynamic page, in this page
call the form, then query the databse:
<oracle>
begin
portal30.wwa_app_module.new_instance(
p_moduleid=>1060253649);
end;
</oracle>
<p>
<oracle>
begin
scott.example_report.show(
p_arg_names=>portal30.wwv_standard_util.string_to_table('_show_header'),
p_arg_values=>portal30.wwv_standard_util.string_to_table('NO')
end;
</oracle>
4. expose this dynamic page as a portlet <HR></BLOCKQUOTE>
I tried the above, but it didn't work. The form was displayed, but I couldn't find any way to make it go to the report. Is there something more that needs to be done? I'm new to Portal, so any help you can give me on entering parameters and passing them to a form (preferably on the same physical page) would be appreciated.
null

Is it possible to sync AND stream from the same iTunes library?

Hi,
I am having trouble in setting up sync AND stream from the same iTunes library.
Config :
Mac OS - Latest update 5/6/09
iTunes - Latest update 5/6/09
Apple TV - Latest update 5/6/09
I am able to either sync OR Stream from my iTunes library but not sync AND stream from the same iTunes library
Let's say i want to sync :
Go to Apple TV > Settings > computer
Add Library (Not shared for Syncing)
Enter passcode in iTunes and select the items to sync
After sync is complete
You can see photo, music & video in My Photos, My Music & My Videos.
Let's say now my Apple TV is full
So like to stream some other content
Now
Go to Apple TV > Settings > computer
Add SHARED Library
Passcode is shown in apple TV but not able to Enter it in iTunes (click to set link is not there next to Apple TV item under devices)
To get that you have to right click the apple tv from the devices and select don't sync.
You will get a message saying that all content in apple TV will get deleted.
If you say yes then only the passcode screen for streaming is presented.
So i am not able to sync AND stream from the same iTunes library.
Any idea?

macanandapple wrote:
1. The checkbox for "show only synced content" should be unchecked
yes
2. No need to Add Shared Library
correct
3. After syncing is complete as per the steps said before, if i have to see a synced content i go to My Movies for streamed content i have to go to Shared Movies?
no... both synced and streamed content show up all together. there is no way to tell what content is synced or streamed when looking at it on the appletv. it is seemless as in there is no difference in how it is presented.
you also need to make sure you are using "custom sync" rather than "automatic sync", as you can't select the "show only synced content" box when using "automatic sync".

Can we install both PI and CE in the same instance ?

Hi,
I have requirement to use EAI and BPM tools in SAP, as i know the tools will be PI and CE, but then to reduce the total cost of the hardware we need to put both PI and CE into the same box. is that possible to install both application in the same instance to reduce total memory used ? because both system also using the same java stack the only different is the installed component.
Please advise ?
Thank You and Best Regards
Fernand Lesmana

Hi Fernand,
is that possible to install both application in the same instance to reduce total memory used ?
Yes, it is possible.
Please advise ?
Not advisable to have PI and CE on same instance. Might face problems as cited by Abhishek.
Regards,
Neetesh

Hi there, Will be possible listen and charge at the same time my iPod shuffle in my car?

Hi there, Will be possible listen and charge at the same time my iPod shuffle in my car? I have got a jack going to my sound system the issue i would like to solve is charging at the same time

Since the shuffle (except for the 1st gen shuffle) uses the same "port" (the headphones jack) for sound output and charging, there is no way to do both concurrently.
NOTE: You can charge and play at the same time on the old white 1st gen shuffle that looks like a USB flash drive.

Why files in Lightroom mobile and files in the creative cloud not the same? idea- one place(stored date) for all application ??????

Why files in Lightroom mobile and files in the creative cloud not the same? idea- one place(stored date) for all application ??????

Lightroom Mobile is not a cloud storage service. You shouldn't treat it as a way of backing up your files. You are merely storing Smart Previews of your files in the cloud space, high-quality JPEGs of your files regardless of their original format on your desktop. The point is that they are there so you can continue editing them in a Lightroom-like environment even while away from your desktop/laptop computer. The files in Lightroom Mobile can only be used in Lightroom Mobile.
This is very different from what is offered by the Creative Cloud storage, which can be used to synchronize your files between any device (that can support the individual files).
The vast difference in how each service works and its intended use is why they are separate.

HT204022 I have iPhoto, iOS, etc. all up to date.... however my iPad, iPhone, and Mac PhotoStreams all contain different pictures and aren't the same. Any ideas why? I'd rather not reset the whole thing if I don't have too.

I have iPhoto, iOS, etc. all up to date.... however my iPad, iPhone, and Mac PhotoStreams all contain different pictures and aren't the same. Any ideas why? I'd rather not reset the whole thing if I don't have too.

OK, restart in Safe Mode, this will clear some caches. It's possible one or more is corrupt. To restart in Safe Mode when you hear the start up tone hold down the Shift Key until you see a progress bar. Let it fully boot then restart normally and test.
Also I am assuming you have checked Finder - Preferences - General and see what boxes are checked in "Show these items on desktop." You can also mount an item in Disk Utility, simply highlight it and then look in the File menu for Mount.....

If I am currently not using OSX Lion and wanted to switch; would the computer automatically put all my old things on the new software?

If I am currently not using OSX Lion and wanted to switch; would the computer automatically put all my old things on the new software?

As long as you don't erase the drive, it won't touch anything except known incompatible programs.

Even I cant believe this is happening again! i'm once again asking for help with my account. Since im very sick I ask that u look into my account and read the hell verizon has put me through and assist ending the hell once and for all even if that means

Even I cant believe this is happening again! i'm once again asking for help with my account. Since im very sick I ask that u look into my account and read the hell verizon has put me through and assist ending the hell once and for all even if that means ending my contract, i just want the hell over. I went into my bill tonight and the mess was still there I paid $110. that's what I owe

I guess I spoke too soon! I really can't believe this nightmare is not over yet! My account is still wrong. The credit that I was due totaled $63.00 I am looking at a message on my phone saying that $21.01 was credited which makes my balance $219.72. I received a text the following day that says, I processed your credit of $30.00 and your new balance $216.73 how is that possible? None of the late fees were credited and the amount due for my monthly charges are wrong. Before any changes were made to my data plan back in Nov. My monthly charges were $140.00, I needed my hot spot back and i was told that the hot spot will increase my bill $10 for each phone that totals $20. The customer rep that change my data plan at that time also gave me a credit of $20 to compensate for the increase until I had time to talk with customer service about the mix-up with my Hot spot. I originally had the hot spot, but the rep that change my plan almost a year prior told me nothing was changing except I was getting more for less money. I explained to that rep that I need my hot spot 4 times a year...and I don't want my plan to have any changes. To verify what I'm telling u check my account and see that I called from Albany New York wanting to know where my hot spot was and I was told I didn't have the hot spot on my account since the last data change! I lost money once again due to the verizon rep's. so my current data plan the rep promised would increase $20 which makes my monthly charges that were $140 prior to the change $160 after the hot spot was returned to my account. Then I was given a $12 credit per month for 12 months because of so many mistakes made to my account so with that $12 credit my monthly charges should $148 + surcharges + taxes and that's not what I see. I do know this much right now my account is in such a shambles I can hardly see the light at the end if there is an end! I need real help!
>> Personal information removed by Verizon Moderator to comply with the Verizon Wireless Terms of Service <<

My ipod will not put all music by the same artist together

my ipod will not put all music by the same artist together...suggestions, please? I have already checked spelling on all and checked to make certain they are all listed under the same genre of music

Do the un-syncing ones play in iTunes?
Try directly redownloading them on the iPod
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I recently sync one song to my friends iphone 4 and it erased all the music and only put that one song. I tried backing it up but it didnt help. How do I put all previous music back on the iphone?

I recently sync one song to my friends iphone 4 and it erased all the music and only put that one song. I tried backing it up but it didnt help. How do I put all previous music back on the iphone?

Re- sync the phone with the computer it was originally synced with.

HT201210 could not back up iphone to this computer. I have bought a new phone iphone 4 and it says the same thing. though I have another iphone 3 that backs up perfectly to this computer every time. why?

I had 2 iPhone 3G's, one of them screwed up and wouldn't recieve service. Up until then when I backed them up to my computer all was good, then one of them would update and all but a screen would pop up and tell me it couldn't back up to my computer. Recently I replaced the bad tele with an iPhone 4 and it does the same thing while the other iPhone 3G still backs up fine.......What up!!! Help please. Don't wanna lose my info..

I banged my head on the wall with the same problem for two days. Tried everything mentioned, and this worked, finally. The problem is that the backup files are not where you think they are.
You need to delete the MobilSync backup folder. I have a Mac. Went to /Library/Application Support/MobileSync/Backup and deleted the Backup folder.
Fixed the problem. Give it a try and good luck!

Why not put all VMs and replicas in the same default folder?

Similar Messages

Maybe you are looking for