Why RAW partitions are visible only on one node in RAC?

I am having 2 node RAC on Windows 2003 Server.
Can anybody tell me why the RAW partitions are visible on RAC-2 but not on RAC-1.
I Shutted down RAC-2, and I thought all the RAW devices will appear in RAC-1, but it didn't work, it is displaying only LOCAL DRIVE.
Why???

I am using Microsoft Virtual Server and I have configured SCSI type shared disks.
I executed the given command
C:\oracle\product\10.2.0\crs\bin>cluvfy comp ssa -n rac-1,rac-2
Result : Shared storage check was successful on both the nodes..
Both the nodes are working properly but I want to know the reason 'why the shared disks are not visible on node1'?
Thanks
Sushil

Similar Messages

Ora.reco.acfsvol.acfs only on one node on RAC on ODA

We have an ODA (old model) and by a power failure in the data center both boot disks in one node are we gone faulty.
After replacing the chassis, RAID controllers and disks (Oracle Filed Engenieer) reports crsctl stat res -t following:
[grid @ XXXXXXXXA ~] $ crsctl stat res -t
TARGET NAME SERVER STATE STATE_DETAILS
Local Resources
ora.reco.acfsvol.acfs
ONLINE ONLINE XXXXXXXXXA mounted on / cloudfs
OFFLINE OFFLINE XXXXXXXXXBvolume / cloudfs off
is that correct?
Oracle support referred me to MOS 1319263.1, but that's for Exadata ....
Thx
Christoph
(i masked the hostname)

No, this is not correct. Your resource should be online on both nodes.
What happens if you try and start the resource manually using srvctl start filesystem?
Have you checked to see if your volume is online?

24GB/1066MHz RAM installed, but 800MHz are visible only, why?

I have 24GB/1066MHz RAM installed, but 800MHz are visible only on my Mac Pro mid 2010, why?

That is a great question...
... for the vendor who sold you that RAM.
It has probably clocked-down because too many modules of incompatible types were installed.

Master Page updated , but changes are visible only for that Page(site) alone ?

I updated v4.master in SharePoint designer to add a bread crum navigation control
<div class="BreadCrumbWrap s4-notdlg">
       <asp:SiteMapPath runat="server" SiteMapProvider="SPContentMapProvider" id="ContentMap"   CssClass="BreadCrumbStyle" PathSeparator=">">
       <CurrentNodeStyle CssClass="BreadCurrentNode" />
       <PathSeparatorStyle CssClass="BreadPathSeparator" />
        </asp:SiteMapPath>
      </div>
But the changes are visible only in that site. all other sites dont have bread crum control,
I added the bread crum in header section, and also in page layout section, but there is no change (bread crum navigation only visible in that site alone)
Why ?
I always thought master page edits will be visible in all sites of a site collection,
Am i going wrong some where (My site collection has about 30-35 sites, and new sites are created every now and then )
Please help
rn

If the publishing features are turned on then the master pages for all the sites in the site collection are pulled from the master page gallery of the root site. But if Publishing hasn't been enabled then each site uses the v4.master in its own master
page gallery. It sounds like you haven't enabled the Publishing Infrastructure site collection feature and Publishing Site Feature in the root site of your site collection.
Paul Stork SharePoint Server
MVP Senior Solutions Architect: BlueChip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Why 9 connections are automatically created per one jms topic?

Why 9 connections are automatically created per one jms topic?
Is it possible for one topic to have one connection, rather nine connecions?
If so, any drag concerning having one connection of one topic?
Let me know asap, it would be really appreciated.
<code>
public void connectJMS() {
try {
if (RTConst.getInstance().getConnectMode() != RTConst.NOTCONNECT) {
targetTCF = ServerDelegate.getTopicFactoryComm();
targetT = ServerDelegate.getTopicNameComm();
connection = targetTCF.createTopicConnection();
session = connection.createTopicSession(false, Session.AUTO_ACKNOWLEDGE);
topicSubscriber = session.createSubscriber(targetT);
topicSubscriber.setMessageListener(this);
connection.start();
System.out.println("[CommJMSReceiver] Common Topic Connection successed");
} catch (Exception ex) {
System.out.println("[CommJMSReceiver] Common Topic Connection failed");
ex.printStackTrace();
</code>
Message was edited by:
PaulSheldonII_Screen

Why 9 connections are automatically created per one jms topic?
Is it possible for one topic to have one connection, rather nine connecions?
If so, any drag concerning having one connection of one topic?
Let me know asap, it would be really appreciated.
<code>
public void connectJMS() {
try {
if (RTConst.getInstance().getConnectMode() != RTConst.NOTCONNECT) {
targetTCF = ServerDelegate.getTopicFactoryComm();
targetT = ServerDelegate.getTopicNameComm();
connection = targetTCF.createTopicConnection();
session = connection.createTopicSession(false, Session.AUTO_ACKNOWLEDGE);
topicSubscriber = session.createSubscriber(targetT);
topicSubscriber.setMessageListener(this);
connection.start();
System.out.println("[CommJMSReceiver] Common Topic Connection successed");
} catch (Exception ex) {
System.out.println("[CommJMSReceiver] Common Topic Connection failed");
ex.printStackTrace();
</code>
Message was edited by:
PaulSheldonII_Screen

Why only gets one node when select many nodes of tree in DWCS4 on Mac OS

I use tag <mm:treecontrol> to create tree in DWCS4 on Mac OS.
When I select many nodes in tree, but I only get one node by method: selectedNodes.
codes of created tree as following:
<mm:treecontrol name='tree' size='20' multiple noheaders>
     <mm:treecolumn state='hidden'>
          <mm:treenode value='A' state='expanded'></mm:treenode>
          <mm:treenode value='B' state='expanded'></mm:treenode>
          <mm:treenode value='C' state='expanded'></mm:treenode>
</mm:treecontrol>
Who can tell me reasons?
Thanks!
comments: if don't use tag <mm:treecolumn>, tree will not show on Mac OS.

Hi macbig,
I finally got to look at my sister's computer. The HDD "Repair Disk" found missing threads, missing directory records, etc. and ended with:
Error: Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-
up files.
Then, I tried "Verify Disk" and it found invalid volume file count and ended with:
The volume Macintosh HD was found corrupted and needs to be repaired.
Error: This disk needs to be repaired. Click Repair Disk
I guess running Apple Hardware Test is not going to happen. :/
I've ordered online a new 2.5 disk, make a Maverick boot USB, and start from scratch. Do you have any other suggestions?
As for the corrupted old hard drive, do you have any suggestions of how to get out the data somehow?
Thank you so much!

EM DB console works only from one node?

In my 2 node RAC the enterprise manager database console works only from one node i.e the url shows login page only from one node.
http://NODE2:5500/em------>WORKS, SHOWS LOGIN PAGE AND CAN MANAGE ALL INSTANCES FROM HERE
http://NODE1:5500/em------>DOES NOT WORK, DOES NOT SHOW THE LOGIN PAGE.
Please clarify.
Kadhim

I have to guess ... (because you tell neither OS nor database version). Assuming it's 10gR2 or higher, that's expected behaviour, dbconsole runs on one node only, the so-called master node. You can change that, see the documentation or this metalink note:
How to manage DB Control 10.2 for RAC Database with emca
Doc ID: NOTE:395162.1
Werner

Does anyone know why some partitions are not mounted at at boot up?

We have many new intel based IMacs with 1Tb internal drives. Each drive is partitioned into 6 and are in a university mac lab.
Occasionally some of the partitions are not mounted when the mac first boots up, so we have to go into disk utility and mount them manually. This happens on various machines at different times. We have NTFS-3G installed so I'm wondering if it's something to do with that.
Any ideas much appreciated!

These are user-to-user forums, you are not talking to Apple here.
Audiobooks (and ringtones) are currently a one-time only download. I believe that they are all supplied to Apple by audible.com, so I assume that it's them who are requiring the one-time only download restriction. To get it onto your other devices you will need to sync it via a computer. Depending upon what country that you are in, Audible.com have their own app (Audiobooks from Audible) so you might be able to buy direct from them, though I don't know whether you can buy within their app or download audiobooks directly from them within the app e.g. whether they need to be copied via a computer.

Why do I have sound only in one headphone, stereo and docking station?

Why do I have sound only coming out of one side of headphone, car, stereo and docking station when playing itunes?

Try cleaning out the headphone jack with a cotton swab.

Why did an iBook purchase only download one chapter and how do I get the rest of the book?

Why did an iBook purchase only download the first chapter?What can I do about this?

is it possible you only downloaded the sample? the cover image for the book will have the word Sample in a red banner across one of the corners.
if you actually purchased the book and only received one chapter, then there should be a link in the email that iTunes sent you to dispute the purchase.

Why some settings are located in windows settings node while other are located in administrative template node?

hi friends
when we look at any GPO in Group policy management snap-in, each GPO has these four main sections
1-software settings 2- windows settings 3- administrative templates 4- preferences
my question is, what logic or criteria exist about dividing OS settings into these four parts?
what shared characteristics exist in windows settings node & what shared characteristics exist in administrative templates node?
its confusing. because some settings about windows exist in windows settings node but some other settings which are again related to windows, are located in administrative templates node.
any help please.
thanks in advanced

> but i need some more info about that
For which purpose? It is the way it is, that's it :)
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Rac One Node on Rac Servers

Hi Xperts
We have this environment:
2 Rac Nodes 11.2.0.3 Enterprise on Oracle Linux 5.9 .
We have one production Database on this Rac and the users ask to create two single instance on each node, something like this:
Node1 -> Rac Prod1, Single Test
Node2-> Rac Prod2, Single Dev
I want to create Rac One node for those Database (Dev, Test) and create New Diskgroups for ech database.
Can I install a Rac One node on those Server with DBCA?
Do I nedd to Install new Database Software ?
Does the installed Rac have some affectation ?
I just want to be sure about this procedure, before to do anything.
Thank you
J.A.

Hi J.A.
Yes you can! However you need to install Grid Infrastructure (GI) in cluster on both nodes, then install database software. Either during software installation or after that, DBCA would allow you to create 1) Single instance, 2) RAC database, 3) RAC One Node database. Keep in mind that RAC One Node is an option (additional license) to the Enterprise Edition of Oracle Database.
I've talked on that topic at the Bulgarian Oracle Users Group at 2011, here is the link to the presentation, you may find it useful. I might upload the videos as well if you need to have something like a proof of concept of just for your own:
http://sve.to/download/1112/
Also I would go with one disk group for both databases, as long as they share the same physical disks I don't see the point of doing that ? Having one diskgroup would allow you to utilize better you disk/space resources.
The procedure would be:
1. Install GI in cluster.
2. Install software libraries.
3. Patch up to 11.2.0.4.
4. Create RAC One Node database using either command line or using Custom Template of DBCA.
At the end of the day, if you have standard edition license you can still install GI in cluster and create single instance databases on each server. The downside of doing that is that you need to manually failover the database to remaining node in case of disaster.
Regards,
Sve

Oracle Binary Currepted in One node 11g RAC

Hi Team,
/oracle(Oracle Home ) folder currepted in one node.
IBM AIX-11.2.0.1
How to reolve the same.
Thanks
Manohar.

1. take the backup of current oracle_home corrupted.
2. Tar the other node oracle_home as below, and copy it to the corrupted node.
tar cvf location <tarname>.tar oraInventory product
3. Extracted the tar on the corrupted node by delting the existing corrupted oracle_home
tar xvf /location/<name>.tar
Now, complete the Oracle RDBMS Cloning Process of the above mentioned untar done in earlier steps:
cd $ORACLE_HOME/clone/bin
Perl clone.pl ORACLE_HOME="<LOCATION>" ORACLE_HOME_NAME="OraDb10g_home1"
Run manual command of “relink all”

Why nokia apps are the only ones you can't install...

Ok Nokia, You created N97. You know that 73M is a joke for the phone's memory (drive c). In the name of all N97 users, why on earth you keep releasing apps like ovi maps with 7-14M where I can only install them on drive c and not on mass memory (where I have 30G)??? I mean, you keep reminding me that the phone has limited memory, why? André Carlucci

Is it grayed out? Have you tried control - clicking on the file and using the contextual menu?

Partitions are read-only after sleep mod, not able to sleep again etc.

I have strange problem, after resuming from sleep mode the system is often lagging, even for minute or so nothing loads. Sometimes it even stops responding at all, I cannot log in and/or start XFCE4. If I succeed to reboot, I get messages about readonly filesystem. May the problem be bad settings in fstab? I tried several combinations of 0 and 1 for the dump and pass for the two NTFS file systems. But even the root talks about read-only than.
Or other case is most things works fine but I cannot make it sleep again, it just writes something like **Message: xfsm-shutdown-helper.c:1411: Using org.freedesktop UPower to suspend on the console where I am logged in and nothing happens.
This is my fstab:
devpts /dev/pts devpts defaults 0 0
shm /dev/shm tmpfs nodev,nosuid 0 0
/dev/sdb4 / ext4 defaults 0 1
/dev/sdb5 swap swap defaults 0 0
/dev/sdb6 /boot ext4 defaults 0 1
/dev/sda1 /home ntfs defaults,uid=1000,gid=100,umask=0027 0 0
/dev/sdc1 /home/Instalace ntfs defaults,uid=1000,gid=100,umask=0027 0 0
Last edited by Behemot (2011-04-20 13:03:00)

From your statement "...after resuming from sleep mode the system is often lagging, even for minute or so nothing loads." I was thinking you might have the problem discussed in this thread: https://bbs.archlinux.org/viewtopic.php?id=116355&p=1 but I see you have XFCE. Strange because this is exactly what other users and I are experiencing under KDE.
Try checking if your CPU or a core of your CPU is at 100% usage.
Last edited by dncrash (2011-04-13 14:15:27)

Why RAW partitions are visible only on one node in RAC?

Similar Messages

Maybe you are looking for