Wi-Fi connection levels are too low

Hi, I acquired a used notebook Pavilion g series with Atheros ar9485 Wi-Fi device but its connection levels are too low compared to my older notebooks. I updated its driver to 10.0.0.313 but to no avail.

Hi there
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel. I understand that you are having connection issues with your wireless adapter. I am happy to assist with this.Please post the full product number for your notebook. See the following, if you need help with that information. How Do I Find My Model Number or Product Number?Are you trying to use this notebook from the same location from where you were connecting with the other device?Does the signal strength vary significantly in that area?Have you tried connecting from different locations of to a different wireless network? Please let me know.

Similar Messages

My audio levels are too low, what can I do about this?

I'm recording my voice, and using an external mic.
I plan on rerecording once all edits are done, but what can I do about this? I''m as close to the mic as possible. Whats my issue!?

Check the Audio settings in Captivate. You may need to increase the gain value.
Is this a USB microphone?

Drum loops are too low in volume vs guitars when overdubbing

After 8 hrs of learning Logic Express 9. I can't record the guitars "hot" because the Apple drum loops are too low in volume. I max them out with extra gain. I even duplicate them so I have two tracks. How can I get the drum loop volume up. I've tried everything I can think of to push it as loud as it will get. I've tried normalizing. I am assuming the quality of the guitar recording is related to how "hot" it's recorded or at least you shouldn't have to turn it down to about 20% when I overdub. I've got an M-Audio solo. Thanks.

Hi
Have you tried monitoring the guitars at a lower lever? You can still record them hot, but listen at a lower level.
From my LE8 manual...
Setting the Monitoring Level
If the Independent Monitoring Level (for Record Enabled Channel Strips) preference in
the Logic Express > Preferences > Audio > Devices > Core Audio tab is enabled, an
independent monitoring level is available when an audio channel is record enabled.
After arming the track, set the fader to the desired level. The original playback level will
be restored when the channel’s Record button is disabled.
Important: The Level fader only controls the playback (or monitoring) level, not the
recording level, when a track is record enabled. Recording levels must be set
externally—on your mixer, or at the original sound source. Care must be taken when
setting input levels, as digital audio will clip when overloaded. Clipping results in a
particularly harsh, metallic distortion, so unless you have a penchant for heavier
musical styles, overloading the inputs isn’t recommended (see “Understanding the Clip
Detector”
Cheers

Audio Levels when exporting are too low

so i tried searching the forums to find an answer, but couldn't really find one. Everytime i export a project from FCP (as WMV, Flash, Quicktime, whatever) the audio levels are extremely, extremely low...to the point that I have to bump them up to +12 and duplicate the audio layers several times. I have to imagine there's an easier way to doing this.. any ideas?
thanks
Paul

I didn't know you could export to WMV in Final Cut. Must be a new feature since the Apple/Microsoft merge....
As far as the audio, how are you monitoring it in FCP? You might have your speakers (or headphones) turned up really loud, so you think the levels are fine until you export. Also, look at the audio meter. You should judge the overall volume by that, not by your speakers. It's kind of like a waveform scope for audio.
Check on those two things and report back.
jesse.
ps. just kidding on the merge. that'll start some rumors.

Audio Level Way Too Low On Movie

I just downloaded my first movie 'Mamma Mia' from iTunes and the audio level is dramatically lower than the hundreds of songs I have purchased.
Furthermore, the preamp, equalizer, sound check and sound enhancer functions in iTunes 8.02.20 don't seem to work on movie audio although they are fine on music. Bottom line, there is not enough audio level from my iPod Touch to drive parallel headphones on an airplane.
Does anyone know if all iTunes movies have this problem, and if so, what can be done about it? I am used to the normal variations in songs but this is ridiculous. iTunes customer service either doesn't know or won't tell me what is going on.
Thanks

"When the iPod is connected right click on the file (on the iPod) and click Properties."
Well, now it's right click on the file -> Get Info -> Options. And yes, both a volume adjustment and equalizer preset come up but neither is active in the window (not on songs either...) I tried changing several options under the iTunes preferences but wasn't able to activate these adjustments - probably not available on the iPod Touch.
Thanks for the idea, anyway!

Speakers on my macbook pro are too low, speakers on my macbook pro are too low

Listening to music, watching DVD's or movies on ITunes, the volumne is too low. Can I make it louder? It is already set as high as it could go.

Yes, I could use more volume myself sometimes. The speakers are not big enough on MacBooks for larger volumes... more might blow the speakers and there would be no chance of any quality sound. Make sure the volume is up on the apps. and websites you use. Earphones are perfect for me and sound way better then the baby speakers. Or try Grant's suggestion.
DALE

Audio level output too low, even if set to maximum

OS: Windows XP Professional Service Pack 3-Build Lab: 2600.xpsp_sp3_gdr.080814-1236
Audio driver: SoundMAX Integrated Digital HD Audio - Analog Devices - Driver date: 08/02/2008, Driver version: 5.10.1.5520
The audio level output is too low, even if setting the output for all sources to the maximum level.
Does somebody have the same problem?
Need your help to see how to correct this and return to a normal operation!
Thank you very much in advance for your help and answers.

Additional informations:
Tested with the audio driver found at Lenovo's website, without any success.
After this was done, the audio driver was updated also without success too.

My microphone levels are too high or too low. I cant get a perfect medium

I am using:
Audio Interface: Focusrite itrack solo
Microphone: Blue encore 200 series with phantom power
Computer: iMac O SX lion 10.7.5
This computer was bought from someone from Amazon.com. Everything seemed to be alright with the computer almost brand new no problems.
It didn't have garageband on it when I recieved it so I bought the garageband app from the app store for $14.99.
I am also currently running the updated software for garageband.
I am a singer and songwriter and I have worked with pro tools in the past but I just cannot seem to be able to level out my vocals when I record.
I can sing soft if I need to and it sounds okay I think but when I actually start to sing louder and step away from the mic a bit because I am a loud
singer. My levels still hit red when I sing louder (normal)
I would also like to add that I have adjusted the gain 01 on the focusrite to almost every position and still hit red everytime I sing like the chorus or a part that has a louder tone to it.
My first question would be why am I still hitting red when I sing loud?
Also, I noticed when I went to the compressor on the track itself i can turn that volume up or down. Is that normal to have to turn the compressor volume up or down to level out the track?
I'm not even sure what the compressor does exactly but all I know is when I plug my mic in turn everything on and try and set my level on the focusrite, without turning the compressor on, I have to turn the gain almost completely up to hear myself through my headphones. (Which couldnt be good) and I am using turtlebeach psx headphones for gaming but they still have a very decent sound coming through them and they are also recognized by garageband and my computer so I was thinking maybe that had no problem to it. Is there a correct way to level out my vocals?
And one more question.
I have noticed when I am recording either guitar or vocals garageband will all of the sudden (out of nowhere) pick up this horrible delay which is about a second long delay and is very annoying. Is there something I could do to prevent that bad delay?
Thank you a bunch
Jason

I am using:
Audio Interface: Focusrite itrack solo
Microphone: Blue encore 200 series with phantom power
Computer: iMac O SX lion 10.7.5
This computer was bought from someone from Amazon.com. Everything seemed to be alright with the computer almost brand new no problems.
It didn't have garageband on it when I recieved it so I bought the garageband app from the app store for $14.99.
I am also currently running the updated software for garageband.
I am a singer and songwriter and I have worked with pro tools in the past but I just cannot seem to be able to level out my vocals when I record.
I can sing soft if I need to and it sounds okay I think but when I actually start to sing louder and step away from the mic a bit because I am a loud
singer. My levels still hit red when I sing louder (normal)
I would also like to add that I have adjusted the gain 01 on the focusrite to almost every position and still hit red everytime I sing like the chorus or a part that has a louder tone to it.
My first question would be why am I still hitting red when I sing loud?
Also, I noticed when I went to the compressor on the track itself i can turn that volume up or down. Is that normal to have to turn the compressor volume up or down to level out the track?
I'm not even sure what the compressor does exactly but all I know is when I plug my mic in turn everything on and try and set my level on the focusrite, without turning the compressor on, I have to turn the gain almost completely up to hear myself through my headphones. (Which couldnt be good) and I am using turtlebeach psx headphones for gaming but they still have a very decent sound coming through them and they are also recognized by garageband and my computer so I was thinking maybe that had no problem to it. Is there a correct way to level out my vocals?
And one more question.
I have noticed when I am recording either guitar or vocals garageband will all of the sudden (out of nowhere) pick up this horrible delay which is about a second long delay and is very annoying. Is there something I could do to prevent that bad delay?
Thank you a bunch
Jason

Recording level is too low when burning CD from playlist

When burning a CD from playlist, the resulting CD has a lower recording level than in the original recordings. How can I adjust this?

It sounds like you are having a similar problem to the one I was having when I was downloading my cds to itunes. The whole album would download but some of the songs would be on a different thumbnail instead of in the same album. Although the albums had the "artist" listed already it would still go to a separate thumbnail. It took me a while to search and figure it out through trial and error but if you right click on the album and when the tab pops up you go to "get info" and select "yes" you want to "edit information for multiple items" you must input the "album artist" and it will automatically import it into the correct album it originally came from. Some of them you have to input the information manually through the "get info". Hope this helps!!!

Black Levels too low

I have a problem with the black level. There are too low all the time. When I do color correction and i render the blacks going up to high. Someone can help me?
Thank you,
Mario

I think you are referring to this:
http://prolost.blogspot.com/2008/01/colorista-clips-no-more.html

Audio levels too low on capture

I recorded someone wearing a lapel mic. Audio is fne when I listen to camera. But when it captures I can barely hear it and the levels are very low. HELP!

If you captured digitally, the audio level in FCP is the same level as it is on tape. Perhaps your camcorder headphone volume is set higher than normal making you think it was fine ... or maybe your speaker level when monitoring in FCP is set too low.
See what the audio meters in FCP show to determine the actual level. If the audio really is too low, increase the gain.
-DH

Volume too low on ringer and with hands-free headsets

Both the ringer's volume and the volume within headsets are too low in my new Droid X. When holding it to my ear while talking it is loud enough well below max volume, but hearing people through headsets while driving is often too low with all volumes set to max (on loud freeways, for example). I usually keep my phone's ringer on silent vibrate, but it would be nice to be able to turn it up louder when the phone is sitting on a desk at home. Cell phone ringers can be obnoxiously loud, but there are times when people need to have them turned up.
Because it is an issue in both the ringer speaker and the jack for wired headsets, it seems like there is a good chance of getting a software fix to raise the max volume levels. Reading posts on forums, it seems clear that this problem is widespread in most, if not all, Droid X devises.
If you are having similar problems, please take a moment to call both Verizon and Motorola with a polite report of the issue. I spoke with both today and they said they were aware of the issue, and the tech at Motorola said they were "looking into" a software fix for it. If enough people call and report it, we have a better chance of getting a fix sometime soon.
Verizon's support line is: (800) 922-0204.
Motorola's is: (800) 734-5870 (I chose #6 for "other issues" a couple of times after routing into Droid support to get a live tech)
It can be frustrating to filter through the support systems and report it, especially if they tell you to try obvious things like rebooting the phone and turning the volume up, but it really is the only way to get them to fix this issue. Both techs I spoke with actually looked in their systems right away and acknowledged the issue is being reported by people.
Of course, if anyone has a real solution to this issue, please let us know what it is!

Thanks for the suggestion JKramer. I should have been more clear about having adjusted all volumes up in the settings screen. Assuming all sound options are located within the "Settings --> Sound & Display" screen, then yes, I have tried changing them. I have also tried changing the option to "use incoming call volume for notifications" under the "ringer volume" settings, after reading that someone had success in improving volume that way.
This issue is not a problem all of the time. It is only an issue when there is an elevated level of background noise, such as driving on the freeway, or having music or a movie playing in the room.
The phone is otherwise excellent! I live and commute in areas of very spotty reception (with all cell providers), and this phone will keep calls and not even have voices garble where my past two phones have consistently dropped calls in at least five problem locations. So far, everything else about it seems to work great!
Maybe some of these phones don't have this issue. Or, maybe the people who say they don't encounter the problem are lucky enough to live in relatively quite environments most of the time. In a quiet house or office, it is certainly loud enough. It just needs to have the option for increased volume when in noisy places. The issue is that its "max volume" settings are not as loud as with other phones.
Searching for something like "Droid X volume" will indeed show many people experiencing these same problems on various forums...

Sound system too low!

After upgrading to Mavericks, all sound system are too low. I can't hear a thing if my volume is at 4 or 5 block, especially on Messages.
On Mountain Lion I don't had this problem. There is any way to fix that?

Since your PowerBook has a Line-In I'd suggest a better solution than an iMic would be a small mixer like the Behringer UB502 Eurorack Mixer for about $30. It will give you a lot more control over the levels.
--HangTime [Will Compute for Food] B-|>
Note: I am an Amazon Associate, if you purchase this item via my link I will get a small commission)

Nokia 3110 Classic Alarm tone too low

I brought a Nokia 3110 Classic yesterday and found the alarm tone too low. Tried chaging the Tones, but all of them are too low. Not enough to wake up. can anyone suggest how to overcome this problem.
Thanks

get a loud tone there is no volume level for this if your havin trouble i will post a good loud one most nokias now have incremental volume ie get louder the longer they ring but i have good loud one
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Salary too low for programmers

I think that salaries are too low. After deductions I get 1.500 Euro on my bank.
Okay, I'm a junior programmer. But programming is hard and one needs a lot of knowledge. I don't think that I earn enough money. If I count the learning which I do in my spare time, I work at least 45 hours a week (38,5 are normal in my Country).
What do you think? Is it enough (1.500 Euro)? Its a German salary.
1.500 Euro are about 1.750 Dollar.

38.5 hours per week in germany ?
No one works this little, except people working at large companies where the unions have a big influence. But with ANY job (even at large companies) that gets you as much as you earn (1500 euro after taxes is a lot!) you will end up doing overhours. That is just normal.
So it is your pre-tax income that matters and that can be taken as a basis. Lets suppose you earn 2500 euro per month before taxes. That seems reasonable if you have no college degree. If you have a college degree you should earn more, lets say 3000 euro per month. If you have a college degree and several years of experience and most important good references (like applications that you have written that are in production use today) then you will be making 4000 per month easily. If you are creative and willing to work up to 50 hours per week and have a lot of allround experience (at least 5 years), then you can make 5000 euro or more per month ... that is BEFORE taxes, you after-tax income depends on your family-situation and all that ...
Also these figures depend on whatever extra benefits you get from your employer ?
Do you have a pension insurance ? (You should have one, because the public pension system will not get you anything when you are old).
Do you get extra monthly salary for christmas or for vaction ?
Do you drive a company car privately ?
So your salary might be too low, but from the given informatino that is hard to judge. Most of all your ability to create profit for your company matters, that is even more important then the skills you have. Since your boss couldn't care less, what your skills are, as long as the profit is ok.
So give additional information, and then we should chat about the strategy for your "gehaltverhandlung" :9
regards, stepan

Wi-Fi connection levels are too low

Similar Messages

Maybe you are looking for