Wiki directories not being created for groups

I am trying to get the wiki service working for a few groups on my 10.5 server and not having much luck with it. I've enabled the wiki and blog services in Workgroup Manager for three of the groups on my server, but only one of them seems to have the corresponding directory tree created in /Library/Collaboration/Groups/
All three groups show up on the website. One works completely, but if I click either of the other two I just get a "404: No group with that name (groupname) hosted on this server" error page.
I tried faking it out by copying the directory structure from the one working group into a directory for one of the other groups, but that didn't seem to trick the server into working. I've tried restarting the Web server with no apparent effect.
What triggers the creation of the directories inside /Library/Collaboration/Groups/ and why is it not happening sometimes?

I have been having the same set of problems. After playing around for a couple of hours here is what I did to solve most of these:
1. Make sure that you have the full Domain Name (www.example.com) for your website in the web/general section of server admin. I just had example.com at first which caused some of my problems. Also, when accessing the site make sure you enter the full domain name (www.exmaple.com) into your browser. Omitting the www caused me to also get a 404 message when trying to access my groups.
2. Make sure that you have your server setup as an Open Directory Master.
3. Make sure that your users and groups are not created in a local directory but instead are done in the LDAP. I had my users and groups created in the local directory which caused them not to properly work when I was trying to select users/groups in the Web Services section for my sites.
P.S.
Maybe I am just a little ******** but I think Apple could have made all this a little easier or at least documented it a bit better!

Similar Messages

Tlanes not being created for all locations for one product

Hello Experts - I need some advice on the following situation:
We have a set of products where tlanes are only being created for 3 locations out of many. What would cause the tlanes to not be generated for all locations if all master data elements are present? We have a valid inforec, mrp views, etc. I can't see anything different with the 3 locations that are working correctly.
Any help would be much appreciated.
Thanks!

Thank you for your resopnse:
To answer your questions, yes, we have done all of these things and the tlanes are still not being created. We have been using SPP for 6 months and this is the first time we've seen this problem. Do you have any other suggestions or is there any more information I can provide you that would be helpful in solving.
Thanks in advance for your advice.
AAF1999

Home directories not being created

Hi,
I am having trouble creating home directories for users on my OSX Server Tiger 10.4.4 running on a mac mini.
Home directoried do not seem to be created for users on my Open Directory.
I have configured my server to be an Open Directory master. I have no other Open Directory replicas/Servers running.
I have set up and configured DNS. It appearts to be working correctly and can resolve my server name to the local IP (10.1.1.X) and give me a fully qualified domain name.
When accessing users on my OpenDirectory via the work group manager the directory name comease up as "LDAPv3/127.0.0.1" (local host possibly the problem).
When I click on the "Create Home Now" button and hit save, the home dirs are not created.
I have checked to make sure that the home directory is shared (owner root) and it seems okay.
I have read some other threads on topics similar to this, but have had no luck. I would appreciate any help in trying to fix this problem.
Please let me know if any further information s required.
Cheers

I had the same issues you've described in this thread. It turned out that I had named my server "morris", and when the client machines went to mount a user's home folder, they attempted to mount /Network/Servers/morris/Users/whoever. When I went to the Finder, I clicked on the Network icon, then the Servers icon, and listed under there was "morris.domain.com" (where domain.com is your own local domain), but not "morris". So it appeared that there was a name mismatch.
The fix was easy. I started up Server Admin, clicked the machine I wanted to fix, clicked the Settings tab in the right pane, the Network tab up top, and changed the "Computer Name:" field from "morris" to "morris.domain.com". From that point on, my login problems went away.
It seems that the Server Admin-set "Computer Name" has to match the machine's FQDN in DNS.

Are wiki's/calendars automatically created for groups?

All of my users are Active Directory users imported into OD. I have e-mail set up for all users and it works fine thru POP3 and thru webmail. I also set up all of these users into groups. The groups work fine for e-mail distribution, but I can't log into any of those group pages. The password box just shakes and asks again. I double checked in server admin and I noticed no calendars had been created for any of the groups. Do those only get created when a member adds something, or are my people unable to log in because the services did not get created properly? I also made sure that every group has the right to create calendars in Server admin.
Thanks for any help anyone can provide,
Chris

Have you enabled the iCal service and checked the Web calendar in the Web Services pane of your site?

Change Pointers not being created for HR-PA Custom Infotype

Problem Description:
We have a custom Infotype in SAP to store the data for contingent employee - Infotype 9001. Change pointers is
turned on. We are running the program RBDMIDOC to send changes to Oracle IDM using message HRMD_A. The change
detected for all infotypes except 9001. For 9001, the change pointer is not created.
The following are the current configuration details:
IDOC Extension Created to Idoc type HRMD_A07 (ZHR_EXT)
custom segment zhr_seg
Change pointers are switched on.
Change pointers switched on for message Type HRMD_A.
IDOC configuration created for Port / Process code etc.
Maintenance of view T777D - Added ZHR_SEG.
If I add the segment ZHR_SEG as a 2nd segment to Infotype 0000, I dont get a syntax error. But the changes for Infotype 9001 are not picked up.
If I add the segment ZHR_SEG as a segment to Infotype 9001, I get a syntax error - check EDI: Syntax error in IDoc (mandatory segment missing) below.
EDI: Syntax error in IDoc (mandatory segment missing)
Message no. E0072
Diagnosis
The segment ZHR9001 has the attribute 'Mandatory' in the syntax description of the basic type HRMD_A07 (customer enhancement ZHR_EXT). However, the segment is missing in the IDoc. The segment number logged in the status record identifies the item before which the segment is missing.
This error may have been triggered by an unidentifiable segment before the expected mandatory segment.
Procedure
Please check the IDoc or the syntax description of the basic type HRMD_A07 (customer enhancement ZHR_EXT).

Were you able to resolve the issue?
If yes, could you please share what was done to resolve it.
Your help will be greatly appreciated.

Why the hyperlink blue text is not being created for .cat & .ad domains? Is it for using Catalan language on them?

I was just trying to share a catalan website with a friend and I realized that the .cat domain was not being hyperlinked. Then I tried with a lot of domains such .es, .fr, .pt ... Finally I got that all domains are working well except for those with a catalan speaking like .cat or .ad (.ad is the domain for adorran websites, Andorra is a country dude!). As a Catalan speaker I'm really upset with you.
Usage details:
Device: iPhone 4s 16GB
Software version: iOS 8.2
Software language: Catalan & Spanish (I tried with both)
Tried apps: Whatsapp, iMessage, Notes & other Apple Apps.
PS: This is not happening with Android, I've asked for...

http://freelance-it.com.mx/forma-correcta-de-utilizar-la-pestana-drivers-dentro-de-mdt-2013/
Freelance-IT http://www.freelance-it.com.mx

Portable Home Directory (PHD) not being created for new users

Creating users in the Workgroup Manager also created their home directories at the time I created it when we were using Leopard 10.5 server.
But now that it is upgraded to 10.6 server, it doesn't do anything when I create a new user and tell it to "Create Home Now".
Any idea how to fix this?

Assuming that the server is properly configured (most importantly DNS) try running sudo createhomedir -a
and see what that does. In my experience, clicking the create home now button doesn't always work.
See here for more info on this command.
http://support.apple.com/kb/TA21050?viewlocale=en_US
Note that this has worked for me on 10.3 to 10.5 Server - I've not tried it with 10.6.
Jeff

Photos are not being created for all users on MySites.

I am currently syncing AD thumbnail photos to sharepoint 2010 SP1 Dec CU . I have configured everything properly and after the full profile sync I can see the binary data for the thumbnail photo. I have run the following command on
the Sync_DB to see the binary data.
Select sAMAccountName,SPS_MV_OctetString_PictureURL from MMS_Metaverse with(nolock) Where SAMAccountName like '%UserName%'
I then go to run the Update-SPProfilePhotoStore -CreateThumbnailsForImportedPhotos 1 -MySiteHostLocation <mySiteHostURL>.
Initially, this took awhile and looking at the library of the photos, a large percentage of users photos were created but there are a lot of photos missing for users in the organization. This is actually affecting my photo so I can see that in
the library, I do not see the three specific photos for myself BUT the binary data for the picture is in the Sync_DB.
The problem is that running the Update-SPProfilePhotoStore only does a portion of the photos. I have re-ran the powershell command multiple times and still not getting additional photos created. The DB does not have any restrictions on growth
and there are no errors on the DB side.

I followed up with Brian and the fix was a multiple step process:
He enabled the User Profile Service (From Manage Services On Server) on all Application servers, then ran a full user profile sync, and then ran the Update-SPProfileStore PowerShel cmdlet again. This added a few more photos, but still not all.
I pointed him at this link:
http://matthewyarlett.blogspot.com/2012/09/profile-photos-not-synchronising-from.html which gives a PowerShell command to check what each user's PictureURL property is set at. He noticed that some URL's had the mysitehosturl:80 in them and some did not.
By using the script in the link sent he was able to remove the :80 from the URL's and then everything started working. Also, I believe he removed the %20 from some of the URL's as described in that link.
Regards,
Andrew J Billings
Portal Systems Engineer//MCSA,MCSE
Blog:
http://www.andrewjbillings.com
Twitter:   LinkedIn:

Dm_os_performance_counters not being created for "some" new databases

I have noticed that a couple of our SQL 2008 R2 Ent (10.50.4286) servers are having trouble creating the os performance counters (database level only). I rebooted each of them during a planned downtime and the problem cleared. A few days later I added
two new databases to one of the previously affected servers. Nothing special about either database in fact their just empty shells our development team with populate later. The first database didn't get any performance counters generated for
it. The second populated just fine. I confirmed through perfmon that I couldn't find the first database in the list of choices. I am sure a reboot will probably clear the problem. However, these are production servers so chances to
reboot them only come around once per quarter. I have run the unload and reload counters command and it had no affect.
Anyone else having this issue?

Hi,
Are there any relative entries were logged in the application log?
There are two good articles on related issue:
Perfmon counters missing for newly added database in sql server 2005
http://blogs.msdn.com/b/batala/archive/2011/03/15/perfmon-counters-missing-for-newly-added-database.aspx
Troubleshooting: SQL Server (2005, 2008) Performance Counter Collection Problems
http://blogs.msdn.com/b/psssql/archive/2009/03/03/troubleshooting-sql-server-2005-2008-performance-counter-collection-problems.aspx
Thanks.
Tracy Cai
TechNet Community Support

Group Folders not being created

Hi folks,
i think this is a simple question: i got Mac OS X 10.4.4 Server with OD and Mobile Homes configured. I set up some custom Groups but the Group Folders are not being created automatically. I think there is a terminal command to do this. Does anyone know that command?
Greets

Is it the CreateGroupFolder command?
(15297)

Reasons for billing documents not being created ?

I am trying to create a billing document from a delivery (VF01). When I enter document number and save, it says 'no billing documents genereated, see the log'. Where to see the log and what do you think could be the possible reasons for billing document not being created ?
Thanks in advance,
Krishen

Hi,
In VL02 transaction, Its the 2nd button on the toolbar With an `!` mark on the icon along with triangle. CLick that button. It will display the errors bcz of which delivery is not created.
In VL01, goto EDIT-> LOG.
The explanation of errors is usually pretty detailed.
Best regards,
Prashant

NIC directories not getting created under ISAPNP

AT-MIO-16X using NI-DAQ5.1 on Win98 (cross posted from the multifunction daq forum)
I am
setting up a spare board after one failed in system - the first board
reported failed when the Test Resources button was pressed.
A second board was tried in this system, with no success.
When
setting a second (similar PC specs) system up (it had been shelved),
the referenced directories are not being created during
the
installation of NI-DAQ and board. If I install and set the board up as
previously configured, matching the address/irq/dma channels,
the resource test reports "Not responding to the first IRQ". (No conflicts with resources reported.)
After
reading other postings (searched forums/knowledgebase, etc.), I tried
setting only the base address, and the resource test passes.
Unfortunately,
when set up in this manner, the AIO and DIO seem to work but the
sinewave generator (test resources again) does not -
nor does waveform generation in our application.

Hello James,
In the future please refrain from posting the same question on multiple boards.
Go here for the active thread.
Regards,
Dan King

XMP files not being created with DNGs...

I'm used to using Bridge with ACR to process Nikon NEFs. But a recent camera update has me experimenting with converting the D3's NEFs to DNG files and editing them with CS2 and Bridge 1.04 which works better on my system. I've also experimented with CS3 and Bridge 2.1.1.9 with the same DNG files.
In both cases XMP files are not being created when working with DNG files. I have enabled "Save image settings in : Sidecar ".xmp" files" turned ON. But they do not seem to be generated and I assume the ACR adjustments are being embedded in the DNG file. Meanwhile doing edits on NEF files continues to create .xmp files as expected.
I find .xmp files to be very useful and I'm wondering why they're missing with DNG files? Are they hiding somewhere other than in the same folder that the images reside in?
Thanks.
Russell

> The information contained in the XMP file is stored in the DNG file so there is no need for a separate file.
Aww, yuck!! That's a real drag...
When editing lots of files (yesterday's shoot produced 8GB) I back everything up to off-line storage and then, after doing all my edits and crops in ACR, I only have to copy over the small XMP files which takes no time at all.
So if I re-edit the DNG with ACR I have to re-copy ALL the files again to the off-line storage.
I used to sometimes even save 2 versions of the xmp files when I needed 2 different crops of the same images, such as doing a wide screen 'cinema' crop for a corporate client's Intranet presentation of their event, as well as more standard crops to be used for their newsletters.
Guess I won't be using DNG any more..
Thanks for the help Kees :-)
Russell

Suppliers which are active and not being involved for a long time

Hi All,
Is there any way we can find suppliers which are active but not being used for a long time (for a specific duration) . i.e being involved in no open POs or no invoices processed or no payments made.
Please advice.
Thanks

Hi Abhi,
I have created some queries for the same. COuld you help me if I am going in the rite direction.
I have created a query to find the suppliers which are not being used in the POs for the past one year by using the below query: But for invoices and payments to be included, I am finding it a bit difficult....need help..............
--FINAL QUERY
SELECT vendor_id, vendor_name, creation_date, last_update_date
FROM po_vendors v
WHERE v.end_date_active IS NULL
AND v.enabled_flag = 'Y'
AND NOT EXISTS (
SELECT 1
FROM po_headers_all h
WHERE h.vendor_id = v.vendor_id
AND h.creation_date(+) BETWEEN (SYSDATE - 365) AND (SYSDATE))
ORDER BY vendor_id DESC
Is it possible to send me the program so that it would be helpful for me to use it.
email: [email protected]
Help Greatly appreciated.
Thanks
Aman

Inbox folders not being created from msf files

Last week, I noticed that my Inbox folder files weren't appearing in my profile. I posted a generalized question here: https://support.mozilla.org/en-US/questions/996903
The response I received didn't help that much. The folder I created appeared on the remote mailbox as empty folders.
My mail account is synced via IMAP to a remote Zimbra mail client using STARTTLS. I can view my Inbox. The other folders in my Inbox account are not visible. I can send and recieve messages from my INBOX.
When I select "Manage folder Subscriptions" In the account options, I can see the folders. When I select them, and click the "Subscribe" button, nothing happens.
Inspecting my IMAP directory, I see the following structure:
~/.thunderbird/13zr0oo0.default/ImapMail/mail.<zimbra_account>.com:
-rw-r--r-- 1 matthewe matthewe 1238 May 2 10:38 Archives.msf
-rw-r--r-- 1 matthewe matthewe 1235 May 2 10:38 Drafts.msf
-rw------- 1 matthewe matthewe 47500385 May 2 09:56 INBOX
-rw-r--r-- 1 matthewe matthewe 375885 May 2 10:36 INBOX.msf
-rw-r--r-- 1 matthewe matthewe 25 May 2 08:58 msgFilterRules.dat
-rw-r--r-- 1 matthewe matthewe 1233 May 2 10:38 Sent.msf
-rw-r--r-- 1 matthewe matthewe 0 May 2 10:38 site-errors.msf
-rw-r--r-- 1 matthewe matthewe 0 May 2 09:59 Templates.msf
-rw-r--r-- 1 matthewe matthewe 2275 May 2 10:33 Trash.msf
The msf files are created when I click the "Subscribe" button but subsequent Mail files containing the mail data are not (note that non-msf files exist only for "INBOX".)
Removing .msf files and restarting Thunderbird has no affect.
When I launch, the errors console reports the following three errors:
"Could not read chrome manifest 'file:///usr/lib/thunderbird/extensions/%7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D/chrome.manifest'.
-- There is no chrome.manifest file in my filesystem under /usr/lib/thunderbird/extensions/{972ce4c6-7e08-4474-a285-3208198ce6fd}"
"While creating services from category 'profile-after-change', could not create service for entry 'Disk Space Watcher Service', contract ID '@mozilla.org/toolkit/disk-space-watcher;1'"
This is reported as https://bugzilla.mozilla.org/show_bug.cgi?id=883621 and has been resolved at https://bugzilla.mozilla.org/show_bug.cgi?id=895964 but my system still throws the error. (I have plenty of disk space. Permissions perhaps?)
[JavaScript Warning: "Calendar https://mail.zimbrahostedemail.com/home/matthewe@<zimbra_client>.com/Calendar has a dangling E-Mail identity configured."]
I'm not sure what that means.
I am using Thunderbird 24.5.0 on Ubuntu 13.10

Is your question about files not being created, or because you cannot send and receive mail, or both?

Wiki directories not being created for groups

Similar Messages

Maybe you are looking for