Will a RV router handle this?

I'm looking to verify that a RV180 or another RV router will handle the scenario below. Also, I need to share 1 internet connection and need to be able to reach the router remotely, the IP Cameras remotely. I'm really trying to educate myself with VLANs by watching online training videos but I'm still getting confused. In order to utilize VLANs, do you have to use static IP addresses on all the PCs? This would be a deal breaker because the public wifi obviously would not consist of static IPs. The cameras as well as the Point of Sale terminals would be static. Also, as noted in the diagram, I have 3 rooms in this old building to home run to so that complicates things a little. Of the switches in the POS VLAN and SURVEILLANCE VLAN will be workstations and printers (POS) and cameras and NVR (SURVEILLANCE). I'm hoping the RV router can use port based VLANs so I can set individual ports up for each VLAN and then go swich to switch. Lastly, does the RV support Layer 3?
Thanks
Ken

>In order to utilize VLANs, do you have to use static IP addresses on all the PCs?
No.
> I'm hoping the RV router can use port based VLANs so I can set individual ports up for each VLAN and then go swich to switch.
RV (e.g. RV180 and RV042G) support port-based VLAN.
>Lastly, does the RV support Layer 3?
RV supports inter-VLAN routing.

Similar Messages

Found an older Sony DSR-PD100A DVCAM for $25 at Goodwill. Will Premiere Pro CC handle this format?

Hello all;
Found this nice triple CCD mini-DV cam cheap and it works well. I have no experience with the Sony DVCAM format, so am unsure how PPro would respond.
Tape is a pain, but some of the things I shoot only require SD video. IIRC, this format puts a low load on the CPU, so maybe editing with it is worth the effort?
Lastly, would I have to buy some kind of digitizing card, or only a Firewire port card? Seems that as I think back, folks using mini-DV had to buy capture cards for their computers.
Would using this cam with PPro require all sorts of additional equipment, like decks?
Thanks,
JE

It looks like the camera has an ilink connector (firewire). If your computer has a Firewire port you should be able copy from the tape to the pc using Premiere. As you said, you might have to buy a firewire card.

I am wondering about transferring my pc date to my new iMac. I know there is a migration assistant, but I have multiple drives in my pc. Will the migration assistant be able to handle this?

I know there is a migration assistant, but I have multiple drives in my pc. Will the migration assistant be able to handle this? I'm going to be trying to move the date to a new imac 27' with fusion drive.

the following set of instructions is a little longer, so you might want to print it out and have it handy
Step 1 - PC
If your PC already is connected to the Internet, hold down the Windows button on
your keyboard and simultanously press R. Into the opening window enter "cmd" (without
the quotation marks). A command line will open, enter "ipconfig" (again without the
quotation marks) at the prompt. Now find the section labelled "Ethernet-Adaptor" and
note the values for IP-Address, Subnet-Mask and Default-Gateway on a sheet of paper
If your PC is not already connected to the internet, you need to manually configure its IP address.
open Network and Sharing Center
do a right click on Ethernet and select Properties
in middle of the screen there is a box labelled "This connection uses the following items"
out of this box select "Internet Protocol Version 4 (TCP/IPv4)"
click on the Properties button in the right corner
Into the window "Use the following IP address" enter the following values
IP-Address: 192.168.0.1
Subnet-Mask: 255.255.255.0
Default-Gateway is the IP-Address of your Router. This value is needed for internet connection, for the file sharing setup only this value can be left empty.
Step 2 - Mac
If your Mac already is connected to the internet, it is likely that it has automatically receive the necessary parameters from your router and therefore should be in the same network as your PC. To be on the safe side, you can check this by
open System Preferences
select Network
choose Ethernet from the panel on the left side of the window
click on Advanced
click on TCP/IP
compare the values for IP-Address, Subnet-Mask and Default-Gateway with those you wrote down earlier.
If both PC and Mac have identical numbers in the first three parts of the IP-Address, you are set.
If your Mac is not already connected to the internet, you need to manually configure its IP-Address as well.
In the TCP/IP window you have just opened select "Manually" from the drop down menu "Configure IPv4:"
Enter the following values
IP-Address: 192.168.0.2
Subnet-Mask: same as with PC
Default-Gateway: same as with PC
Step 3 - Activate File Sharing on PC
open Control Panel
select Network and Internet
select Network and Sharing Center
on the left panel select change advanced sharing settings
in the middle of the new page enable turn on file and printer sharing
Step 4 - Activate File Sharing on Mac
open System Preferences
select Sharing
set check mark next to File Sharing (green circle appears on the right side next to File Sharing:)
click on Options:
set check mark next to Share files and folders using SMB
in the listbox under the text Windows File Sharing make sure there is a check mark next to your account name
Step 5 - Create a share on your PC
In Explorer select the folder you wish to share
do a right click on that folder and select "Share with"
choose "Specific people"
a new window opens. there select your Windows username (usually the first in the list)
if you plan to copy from Windows to Mac only, it would be sufficient to grant Read permission only, but, since most likely you are the only person to access that share and certainly do not plan to sabotage yourself, Read & Write permission is ok too.
finally click on "Share"
Step 6 - Create a share on your Mac
Once the check mark next to your account name is set (see above) your home directory is automatically set as a share.
Step 7 - Connect your PC to your Mac-Share
do a right click on the network icon which resides on your desktop or in the left
panel of every Explorer window
Select Connect Share
in the text box next to Folder: enter \\<ip-address-of-your-mac>\<your-osx-username>
if you are using the same username and password on both Windows and OSX click on "Finish",
if not set the check mark next to "Connect using different credentials" afterwards click on "Finish" A new window will open where you enter username and password that you are using with OSX
Step 8 - Connect your Mac to your PC-Share
hold down the command key and press K simultanously or in Finder click on Go in the menu at the top of your screen and select "Connect to Server"
in the Window that opens enter smb://<your-windows-username>:<your-windows-password>@<ip-address-of-your-PC/<y our-windows-username>
or
smb://<ip-adress-of-your-PC/<your-windows-username> you will be asked to enter your Windows username and password in popup window
Now you have both computers connected to each other. Each will provide you access to your home directory of the other computer. Open a second Explorer or Finder window with your local home directory and start copying

I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device. But I have a Conceptronic router. Will Time Capsule work with this and how?

I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device. But I have a Conceptronic router.
1. Will Time Capsule work with this and how?
2. Can my printer USB be plugged in and then shared between the devices?
3. Can I create a network and how?
4. What happend when a visitor logs onto my existing wireless router?
I'm new to Macs (well a returning user having started with Mac Plus!!) and not very technical. Any help / advice will be much appreciated.
Ray

The key to what you seem to want to do is to be able to get Apple's Time Capsule router to "join" the network that your Conceptronic router. I believe that works with some third-party routers, but I've never seen a list of those that work in such a configuration and I have no experience with Conceptronic equipment.
You might be better off with a Network-Attached Storage (NAS) device instead of a Time Capsule.

Will a new router increase my broadband speed in this configuration

How much (if at all) can I increase my broadband speed by getting a faster router. Here's my config:
DSL line --> DSL modem --> Lynksys BEFSR41 Router --> Ethernet cat-5 wiring in house --> TimeCapsule WiFi
The computers using this network are an Intel iMac (10.6), a PowerPC iMac (10.4), and two Intel MacBooks (10.6).
The modem/router are located in an in-wall distribution box in a utility room. I want to keep the hardwired ethernet available in case the WiFi quits temporarily. The TimeCapsule is in a good location (top shelf bookcase on first floor) for coverage of my 2-story house. In principle could eliminate the Lynksys modem, and use the TC as the primary router, but it would be difficult to physical locate the TC where it could both distribute to the house ethernet and have good radio reception.
Testing via the hardwire ethernet (using Speakeasy and speedtest.net) shows download and upload speed 1.27Mbps and 0.32Mb/s. My ISP is pacbell.net. I get the same result via my W-Fi. Speedtest.net tells me my result is about 40% of the average for pacbell.net to my zip code 94301.
I've heard there are much faster routers than the BEFSR41, but I don't know if my internet speed is limited by my current router or by pacbell's DSL service.
Any insights would be appreciated.

Will a new router increase my broadband speed
No...your speed is only going to be as fast as your weekest link, which in your case is the DSL modem and the connection speed package you subsribe to.

Can my AE handle this?!

My ISP have recently starting offering a broadband service of 25000 Kbit/s down and 2500 Kbit/s up.
In theory this sounds great, but I have also been reading of problems that some customers have had with their routers - it seems that some routers simply cannot handle this speed, and don't deliver anywhere near this speed to devices on the wireless network.
Does anyone know if the latest Airport Extreme can handle this speed, or will it max out somewhere below this? I know that all these speeds are "best efforts" from the ISP, but the point is can the router cope with anything close to that?
I'm currently running 10000 Kbit/s down and 1000 Kbits/up with no problems.
Thanks

25000 Kbits/s == 25 Mbps
2500 Kbits/s == 2.5 Mbps
Every AirPort Extreme base station (AEBS) is faster than that. You shouldn't have any problem.

What's the best way to handle this?

I'm not sure what APIs/setup to use for this situation:
A company wants to store data projects they do for clients. Each year, the data fields are set (as a result of gov't requirements) and they won't change for any client project for that year. however, the fields required can (and usually do) change every year. So things they require this year, might not be needed the next year and new fields might be introduced.
While there are likely to be many common fields from year to year, there's no way to guarantee which ones will remain consistent. They also want to be able to do searches on the data and fields, for projects within a year and across years.
What's the best framework/API/configuration to handle this? EJB? Simple JDBC? If so, how should the database be handled? Won't it have to constantly create new fields in a table? Or is there another way to handle this?
What's the best way from a "clean architecture" standpoint?

dang, I really have to start over? I finally got all this stuff working again. well, hopefully it won't be as big a pain this time since the data won't be coming from a different machine. After completing the Migration Assistant process, I had to reinput a bunch of serial numbers for apps, reinstall print and mouse drivers, etc... I've finally got the new machine up and running smoothly and now I gotta start over? Sigh.
I was hoping that either I could rename the current account after deleting the other one, or just move everything from one account to the other and then delete the 'RJM' account.
ok, so it sounds like here are the steps I need to take:
- make another full cloned backup of this current machine in Super Duper
- reboot this machine using the advice in the first post, wipe everything clean and reinstall the OS
- create a new account like 'user1' and re-do software update (which is like 2.5 gig worth of stuff) and takes like an hour even on a high speed connection
- then re-do the migration assistant process to the properly named account
- then delete the 'user1' account
does that sound right?

How to handle this scenario in selection screen?

hi friends...i have 2 radio-buttons (2 parameter fields below each) in one group..the need when one radio button is checked, i need two parameter fields below it to be input enabled and the other to be disabled, if another radio button is checked, then the former two will be disabled and the other two parameter fields to be input enabled..no problems with this..i have written this functionality in at selection-screen output..i want to make each 1 parameter in the two groups to be mandatory..as using obligatory gives problems during at selection-screen output event, i want to achieve this functionality in some other event...i have tried the same in At selection screen on para_1 and at selection screen on para_2 fields, but am not able to achieve the desired functionality..by default the first radio button is checked, if the user wants to click the second radio button, At selection screen on para_1 event gets triggered and it throws the error msg. for the first one & vice versa...can't handle this in start-of-selection event also, as it gives the error msg. in a blank new screen..how to achieve it??
i have checked quite a few SDN threads, but doesn't answer my question
regards,
Sathish R

Hi,
I think you cannot proceed with obligatory statement as it will be triggered before theselection screen events.
You may check the code below.
PARAMETERS: r1 RADIOBUTTON GROUP rad1 USER-COMMAND abc.
PARAMETERS p1(5).    ( maintained as obligatory)
PARAMETERS p2(5).
PARAMETERS r2 RADIOBUTTON GROUP rad1.
PARAMETERS p3(5).       ( maintained as obligatory)
PARAMETERS p4(5).
INITIALIZATION.
r1 = 'X'.
AT SELECTION-SCREEN OUTPUT.
IF r1 = 'X'.
    LOOP AT SCREEN.
      IF screen-name = 'P4'.
        screen-active = 0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ELSEIF r2 = 'X'.
    LOOP AT SCREEN.
      IF screen-name = 'P2'.
        screen-active = 0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
AT SELECTION-SCREEN .
IF p1 IS INITIAL AND sy-ucomm NE 'ABC'.
    MESSAGE 'Enter the obligatory value' TYPE 'S' DISPLAY LIKE 'E'.
ENDIF.
IF p3 IS INITIAL AND sy-ucomm NE 'ABC'.
    MESSAGE 'Enter the obligatory value' TYPE 'S' DISPLAY LIKE 'E'.
ENDIF.
Hope this will help you.
Regards,
Smart Varghese

My itunes won't sync to my iphone anymore. How do I handle this?

My itunes won't sync to my iphone anymore. How do I handle this?

Double click your Home button, swipe right on the multitask window, you will find the orientation lock on the left. Tap it to unlock and Home button to close Multitask windows. Now landscape orientation will work when you turn your phone

How to handle this Rework Scenario.

Hello friends,
Following is the rework scenario that is in Pharma.
My client produces finish product quantity extra than required. Suppose i have order of 1,00,000 tablets. Production order is created and production is completed. Suppose for this order 1000 tablets are produced extra than order quantity. This extra production is kept in production only. In such way, for each order, extra quantity of finish good goes on increasing in production.
Suppose now i have order of 10,000 tablets and in production i have 5000 tablets that are already produced. Now i use this 5000 tablets as rework material. I want that when i run MRP system should generate order of only 5000. I do production of 10000 qty. by using 5000 rework material and 5000 order quantity.
How can i map this scenario in SAP?
Thanks

hi
Pls. find here step by step procedure for Rework Order :
REWORK HANDLING PROCEDURE
There are two way one is manual and another is with trigger point (ref operation set)
1.Create Rework order without material at CO07 with out material .
2. Assign the settlement receiver as original production order at settlement rule.
3. Assign the rework material & component if needed at rework order & assign the issue storage location (unrest- use storage location above).
4. Do the confirmation for rework order & rework material will be issued from stock to order
5. GR will not be done for rework order. To get stock for reworked material Do the GR for orginal order & settle the both order .
Another method,
1. Create a Reference op set in tcode CA11.
Enter the plant, Description, usage and status
for the ref op set
2. Create a Standard trigger point in CO31.(Ex
Production)
Enter the Trigger Point usage /Group as FERT.
3.Tick the Trigger Point Functions.
4. Enable the indicator create order with Reference .
5.Enter the system status as PCNF.
6.The system will says standard trigger point exists from which you can
select the created Trigger Point (EXx Production)and save.
7. MD02/MD04.
8. Convert the Planned Order into Production Order and Release the order.
9 .Now confirm th ops.
10. For the last op enter the yield and rework qty
and set the status as PCNF.
11. If the status of last op is PCNF then in the
system a POP UP will appear as Activited by
Trigger Point /Create order with reference/order
number/sequence and op number which trigger point
works and enter.
12. Now a rework order will be created.
13. In c003 enter the number which is next to the actual prodn order no.Rework order will be seen.
Hope this helps.

My cube size is go on increasing essbase how to handle this ?

ex:day 1 my cube size is 60 gb.after 2 days it go 80 gb.how to handle this in essbase

May be you can try to do a restructure of the Cube. But it will take more time and and when this restructure is being performed no one will be able to access the cube.
All the pag files will reduce to less files once its done.
We have around 170 pag files and after restructure they have reduced to 130 pag files. You do not need to change any data inside the cube to do this.
The process to do from F to H and back from H to F.
Restructure to H drive
Create the directories on the H drive if they do not exist. (not sure if this is necessary)
Go to properties of the cube (storage tab) and remove the F drive, and add H drive
Do a stop and start of the database
Go back to properties and insure the H drive is there
Right click on the cube and confirm the H drive is there
Then go to cube and do a restructure
Restructure back to F drive
Go to properties of the cube (storage tab) and remove H drive and add F drive
Do a stop and start of the database
Go back to properties and insure F drive is there
Then go to cube, right click and do a restructure back to F.
Regards,
Naveen

Swapping hard drives .... how does lightroom handle this ?

My photography is done on a separate computer to my online machine and the photo system never goes online ( so virus-proof ).
I use " Laser " brand hard drive racks which allow me to swap hard drives on each machine, and also to swap them between the two computers.
So I have several HDD's with different photo projects on each drive and some backups on HDD's as well.
Lightroom is a database system rather than a browser, so how will it be able to handle swapping HDD's in and out like this ? What happens if lightroom points to a file which is on another HDD not currently installed in the machine ? Will it be able to show all the thumbnails and tell me which HDD holds them ( as I believe programs like Imatch can )? Will lightroom be confused by this. Or will it set up its database on each HDD so each disc is a self-contained library with its own lightroom index ?
I know I can't be the only one with more photos than fit onto just one HDD. Can anyone please tell me how lightroom's library system deals with this situation ?

Thankyou very much for the responses so far ....
I see a potential problem because my HDD's are not permanently connected in the computer. Each HDD as it is swapped in and out is assigned the same identifier, say " drive D " or suchlike by windows. So my drive D might be any one of several HDDs .... with very different content to the previous drive D I had in the machine. If Lightroom stores its library for each of my drive D's on drive D itself, then I suspect there will not be problem because each HDD will be its own self-contained libary and Lightroom which resides on drive C will be able to operate on each one in turn. I will then have a series of HDD's dedicated to specific tasks, and can use Lightroom on all of them.
Windows works this way, where it resides on my drive C and performs operations on each drive D. It has no problem in " picking up " each new drive D at startup. I do not attempt to hot-swap.
But I do not know if this is how Lightroom operates. If Lightroom stores any of this information on drive C will it be able to differentiate between the different drive D's it is confronted with ?
Geoff's reply suggests that Lightroom might store some or all of its database/library with itself on drive C. Even this might work if the missing files are shown in red. I would just need to select the right HDD to put into the machine for the project I want to work on. Hopefully this will work like the external drive situation Andrew has described. I am using sticky labels to identify each HDD with the projects it holds at the moment ....
Sounds encouraging .... Thanks for the help.

I have a macbook pro 13" with intel i5 2.3GHz processor. I want to know if my mac will be able to handle Battlefield 3 smoothly. I just want to play without any lag (I'll use Windows vista on parallels)

I have a macbook pro 13" with intel i5 2.3GHz processor. I want to know if my mac will be able to handle Battlefield 3 smoothly. I just want to play without any lag (I'll use Windows vista on parallels). I don't exactly know how turbo boost 2.0 works either. Or if it'll help.

Recommended system requirements for Battlefield 3
OS: Windows 7 64-bit
Processor: Quad-core Intel or AMD CPU
RAM: 4GB
Graphics card: DirectX 11 Nvidia or AMD ATI card, GeForce GTX 460, Radeon Radeon HD 6850
Graphics card memory: 1 GB
Hard drive: 15 GB for disc version or 10 GB for digital version
Minimum requirements for Battlefield 3
OS: Windows Vista or Windows 7
Processor: Core 2 Duo @ 2.0GHz
RAM: 2GB
Graphic card: DirectX 10 or 11 compatible Nvidia or AMD ATI card.
Graphics card memory: 512 MB
Hard drive: 15 GB for disc version or 10 GB for digital version
You only have 384 MB of GPU Memory....
Processor class
Intel Core i5
Processor model
Sandy Bridge
Processor speed
2300 MHz
Number of Cores
2
Cache size
3 MB
Graphics
Graphics Type
Integrated
Integrated Graphics Chipset
Intel
Integrated Graphics Chipset Model Number
3000
Graphics Memory
384 MB
Memory
Installed memory
4 GB
Maximum memory
8 GB
Memory technology
DDR3
Memory Speed
1333 MHz
I don't think your mac can handle it... but like the dude above you said... trial and error is usually the best way to find out. Hope this helps!

I want to rent an unit For Items How Can I Handle This cycle ??

i want to rent an unit For Items How Can I Handle This Cycle ??

If you type :
<p>some text here <img src="some_image.jpg">and more text here</p>
then it will be displayed as in :
some text here
<some_image.jpg>
and more text here
It splits all the sentence !.. no need to give you an URL example... it's logic ! please try...

Can a PowerBook G4 handle this game?

These are the system requirements of a game I want to get. But can my computer handle this game? I have a standard PowerBook G4 12" running Tiger.
Operating System: Mac OS X 10.3.9 or later
CPU Processor: PowerPC G5 or Intel chipset
CPU Speed: 1.8 GHz or faster
Memory: 512 MB or higher
Hard Disk Space: 3.5 GB free disk space
Video Card (NVidia): GeForce FX 5200 or better
Video Memory (VRam): 64 MB or higher
Recommended System Requirements:
Operating System: Mac OS X 10.4.6 or later
CPU Processor: PowerPC G5 or Intel chipset
CPU Speed: 2.0 GHz or faster
Video RAM: 128 MB
Do you think the standard PowerBook G4 12" could handle this game? The only things my computer doesn't meet are the CPU speed and the CPU chip set (I'm a G4 at 1.5 GHz). Thanks.
PowerBook G4 12.1 1.5 GHz 512 MB RAM Mac OS X (10.4.6)

Hi College Caleb,
I think the game will run on your system, although it might be slow sometimes:
http://forums.civfanatics.com/archive/index.php/t-176229.html
There's a patch out now from the makers of the game that apparently fixed the sound issues on all systems. Furthermore, even people running Civ IV on dual 2.5 GHz G5s have been experiencing performance issues. Probably they will come up with another patch to make it run more smoothly on all systems. I think I'll give it a try on my PB G4 soon.
Good luck.

Will a RV router handle this?

Similar Messages

Maybe you are looking for