Will Audition save to a VOX Mu-law 8-bit file?

We are using a really old software called Aardvark right now because it saves our IVR (phone queue recordings) into this format. Aardvard no longer exists and won't work on XP or higher so we are trying to find something else that will work. I see that Audition can play vox files but can it record in this format as well. I'm just an IT guy here in my company so I apologize for the ignorance of this post. Any help I can get would be greatly appreciated.

I'm not sure it will record in that exact format, but it can record in 8-bit.
You can save files in Audition as 8-bit mu-Law, so my suggestion is to record in a better resolution (at least 16-bit, 44.1kHz), do any editing that needs to be done, then save the file as an 8-bit mu-Law.

Similar Messages

  • CS4 on new 64bit machine will not save files, "unkown error"

    I just upgraded my machine from an older 32 bit PC to a 64 bit PC running Windows 7. As part of the migration O'm having to re-install a lot of softwaare including Illsutrator. The install was succesful, Illy runs and will open all of my old AI files, but it will not save them. All I get id an "unkown error" message. New files created form scrath save ok; old files will save over or be "saved as"; if I copy the contents of an old fiel to a new page it will not save either. I have removed the AIprefs file but no change.
    Any idea what the issue is?

    I have had this problem as well and this is my take on it. It can open the files being that it's .ai format but it can't just save them again being that the previous save format was 32bit and now the save format is 64bit and when you ask it to save a 32bit file it wants to save it as 32bit again but illustrator can't do that from a 64bit system. The bit size does make a difference but if you go to save as instead of save it will save it and you can write over it. What your doing then is saving a new 64bit file over the old 32bit file.

  • Save As Dialog Different on Exit vs. File - Save As...

    I started by opening a raw file through Camera Raw into a 16 bits/channel document.  My intent was to edit it a little and save as a JPEG.
    Photoshop CS5 Adobe added the ability to save a 16 bits/channel document as a JPEG, without first having to convert to 8 bits/channel.  BRAVO Adobe!  It's been great.
    However that functionality is specifically missing if one tries to exit Photoshop CS5 with an unsaved document.  Quite a lot of stuff is missing from the Save dialog that pops up there, actually.  It's like some kind of minimalist version.  Why?
    If I edit a 16 bits/channel document and try to exit before saving, this is the dialog it puts up:
    However, File - Save As yields this dialog:
    -Noel

    Thanks for clarifying. 
    I understand your thinking - you're trying to watch out for the newbie user and trying not to lose his/her layers, etc.
    The thing is, the way it is now makes it just a bit harder for a power-user who knows what he's doing to use Photoshop.  I've always disliked features that dumb systems down in the guise of protecting the less technical user at the expense of power.  This is not Photoshop Elements, after all!
    My case in point:  I opened a raw file, Camera Raw automatically applied the settings I had chosen and which the software had stored, I downsized the opened image, and wanted to save it as a JPEG.  It had no layers or other "fancy" attributes other than the fact that I always open raw files into 16 bits/channel depth (and I wouldn't want to change THAT default).  Since I don't, as a habit, leave applications open, I thought I would just close Photoshop and save the JPEG on the way out.  The dialog shown above defaulted to PSD, as I expected, but simply didn't allow me the choice to change it to JPEG.  So instead of just being able to blaze through the work in the quickest way, I had to cancel that dialog, choose File - Save As, then exit...
    Break in concentration and extra steps for the user who knows what he's doing.
    It seems to me that the act of prompting him on exit with a Save As dialog is all the notification needed that document information could be lost, and the user actively changing to another (lossy) format is the user's own confirmation that he/she knows what he/she is about to do.
    The more powerful Save As dialog just as it is today would be a perfect match for this.  It's a logical outgrowth of Save As A Copy, and the new feature where you're now allowing Save As JPEG directly from a 16 bit file.  By using the same dialog at the same time as making the product more powerful, you could simplify the implementation and save some future maintenance cost.
    -Noel

  • How do you transfer photo albums to the computer?  When I hook to USB, it only shows photos from the camera icon, not the photos icon.  I am trying to save pictures for the in-laws from their ipad.

    How do you transfer photo albums to the computer?  When I hook to USB, it only shows photos from the camera icon, not the photos icon.  I am trying to save pictures for the in-laws from their ipad.

    I have no clue that you mean by it only shows photos from the camera icon. It has to show the photos in the camera roll of the photos app since those are the only photos that you can import via the USB cable.
    There are other ways of transferring photos to a computer, but they involve using third party apps. There are WiFi transfer apps that will do this. DropBox will also let you upload photos to a public folder and then download them to a computer.
    Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support
    http://www.wirelesstransferapp.com/
    https://www.dropbox.com/ipad

  • How can I save a page offline? the "complete" option in "save as" produces a folder w/ 36 kb files that will not open.

    the "complete" option in "save as" produces a folder w/ 36 kb files that will not open anything - can't I save the page as a single offline file?

    This is not really an answer just my comments on your question.
    I am sure I recollect efforts being made to get mhtml to work with FF.
    Probably the important thing to remember about .mhtml is that if other browsers do support it they may need addons, and may not necessarily render the content correctly/consistently.
    There are FF addons designed for archiving webpages, you could try them, but that then assumes the recipient has the same software.
    You could simply save the page from FF to your XP pc; then offline open it with and save it using IE, before then emailing using FF, and attaching the .mht or mhtml file that you have now created on your PC.
    As an alternative method, in some cases it could be worth considering taking a screen grab of the required page, then sending that to the recipient as a single email attatchment using either a bitmap or jpeg file format for instance.
    Something such as an airline booking may be designed with a print option, possibly it could be worthwile looking at sending the print file itself as an email attachment.

  • OSX 10.7.4. will not save ANY of my preferences (system or application -- Safari, Office, etc.)

    I am running System OSX 10.7.4 on three different MacBooks.  It will not save any of my preferences (system or application based), passwords, log-ins and keychain. Even Safari did not save imported bookmarks.  I am running Office For Mac 2011 (v 14.2.1) and Outlook will work for a day or two and then I get a rebuild database error message, losing everything.  Word, et all, will not save any preferences, not even recent files.
    I did a full erase and clean system reinstall and a fresh install of Office. This problem occurs on all 3 of my MacBook, 2- MacBook Pro’s and a MacAir.  One of the MacBook Pro’s is BRAND NEW. 
    Any ideas, any fixes out there?

    I have what seems to be a similar issue. Are you having other issues like mine?
    Macbook air      11-inch, Late 2010
                            4 GB 1067 MHz DDR3
    Software           Mac OS X Lion 10.7.4 (11E53)
    I have updated the latest combi update from the apple site and still have the same issue.
    No matter what I try every time I restart my Mac all my preferences and applications reset. (Also preferences don't save when exiting the preference folder)
    For example when in >system preferences>general -untick the 'restore windows when quitting and re-open apps' I exit preferences and then go back in to check it has automatically reticked the box.
    I have deleted 2 applications several times (including removing the icon from the dock) and each time after restarting it shows a question mark on the dock where I had deleted it from.
    On restart I loose downloads and history in safai.
    On restart it re opens documents and applications I have quite even after unticking the restore applications on restart box (the one that comes up when shutting down or restarting)
    I have been trying to solve this for a month now and it really is frustrating the **** out of me.
    helpppp pleaseee...

  • My HP Office Jet Pro L7555 scans but will not save it to a flash drive. Is there a fix for that?

    I have a some issues:
    1. My HP Office Jet Pro L7555 scans but will not save to a flash drive. (I get error messaqges when I try to download it to my computer) What is the fix for that?
    2. Sometimes when I turn it on it will indicate that one of the ink cartridges is empty and upon restartin it all the cartidges show full. What is the fix for that?
    3. We have a small network. I can not find the disks that came with the printer. How do I set  it up so it saves to one of the computers connected to the network?
    Thanks,
    PF1

    Hi,
    Heres a patch for missing scanned images
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=oj-81532-2&cc=us&dlc=en&lc=en&...
    Heres the link for the full feature software download
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-79356-3&cc=us&dlc=en&lc=en&...
    and use this document for ink related issues
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01628836&tmp_task=solveCategory&cc=us&dlc=en&ju...
    Hope this helps..
    Although I am an HP employee, I am speaking for myself and not for HP.
    *Say thanks by clicking the "Kudos! Star" which is on the left*
    Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

  • In iOS 4, you could make separate photo slide shows with separate songs.   In iOS 5, this has changed. Now only 1 song is allowed at a time. It will not save separate song selections for each slide show.  Is there any way to fix this? This is something I

    In iOS 4, you could make separate photo slide shows with separate songs.
    In iOS 5, this has changed. Now only 1 song is allowed at a time. It will not save separate song selections for each slide show.
    Is there any way to fix this? This is something I use every day.
    I am on an iPad 2, 32gb, wifi...
    Thank you

    My Photos app works the same on iOS 5 as it did on iOS 4 i.e. I can have a different track for each album. When I select a track for a photo album I then start the slideshow so that it shows the first couple of photos with the track playing - I'm not sure it's necessary to start the slideshow but I always do and it remembers that track for that album.

  • What are the security settings to lock down a form with fillable fields and yet allow someone with Reader to fill in the fields as will as save the form and print it?

    What are the security settings to lock down a form with fillable fields and yet allow someone with Reader to fill in the fields as will as save the form and print it?

    You want to allow someone to open your document and fill out the form (in the fields you have created), but not change or edit the form, right? Here's the answer - assuming you are using Acrobat Pro and someone will be opening the PDF using at least Acrobat Reader 9 and up:
    Tools > Protection > Encrypt < Encrypt with Password
    Answer YES to change the security.
    A new window opens:
         Do NOT select Document Open (or that will require a password to open the document.)
         Select: Permissions (Check the box next to "Restrict editing and printing of the document.")
         Change the following 2 settings from the drop-down box:
              Printing Allowed: Select High Resolution
              Changes Allowed: Select Commenting, filling in form fields, and signing signature fields
              Leave selected: "Enable text access for screen reader devices for the visually impaired"
              Change Permissions Password (insert a strong password)
              Leave all other settings alone in "Options"
              OK - OK
              Re-enter the Permissions Password (the one you entered above)
              OK - OK
              Save the PDF to apply the security [notice that (SECURED0 will appear after the document title]

  • Hello, I have a series of language cd's that I am trying to put onto my iTunes but when I download them, they will not save separately instead they are saving as the first disk so i am ending up with 3 disks on 1. Please help

    Hello, I am trying to copy a series of language cd's onto iTunes but each cd will not save separately, instead it is saving all as one disk. So I am ending up with 3 disks on 1 with 3 different track1, 2 etc. Please help as I am sure there is an easy solution to this that I have no clue about. Thanks

    After you insert the CD but before you import it into iTunes, select all tracks and set the disc number to 1, 2, 3 ... as appropriate.

  • Desktop 6.2.2 will not save data

    Since I upgraded to 6.2.2 from 4.1.4 my Desktop will only save old data, like items more than 2 years old. On restarting the computer, it wipes out anything new. But not always... I've tried reinstalling it several times. It seems like it starts to save, it works for several restarts and then one day it just looses the last 3 weeks or so of data. Completely gone, not in backups, not anywhere. Wiped out. It also does this with my address book. It takes a random time period and just wipes out all the addresses entered since then - completely gone. I've had it with this program.
    I've used Palm for 10 years or so but I'm currently without a Palm device. With so much data saved in the desktop, and my comfort with using it, I would like to continue using the desktop indefinitely. I tried reinstalling the older 4.1.4 version but the data from 6.2.2 will not transfer. At this point I can no longer use the program without backing everything up on a daily basis on removable hd to keep it away from the desktop. This just shouldn't be.
    So.... can anyone tell me how to get the data out of 6.2.2 and into 4.1.4? I'm running XP Pro. I'd hate to give up on this software because there's nothing as good out there, but then again, I can't live with it like this. I never had a single problem with 4.1.4.
    Thanks,
    t
    Post relates to: None

    There is no way to downgrade and export your data to a lower version of Palm Desktop. Now with Palm Desktop 6.2.2 when you close the Desktop you may want to go to file and save all then close.

  • UPGRADED 10.4.11 ON MACBOOK PRO TO 10.5, NOW UPDATES TO 10.5.8 WILL NOT SAVE, "DIGITAL SIGNATURE DOES NOT MATCH". ANY IDEAS.

    UPGRADED 10.4.11 ON MACBOOK PRO INTEL TO 10.5.1 (FAMILY PACK VERSION), UPDATES TO 10.5.8 WILL NOT SAVE DUE TO, "DIGITAL SIGNATURE DOES NOT MATCH". ANY IDEAS? CAN I UPGRADE TO 10.6.1 WITHOUT SAME ISSUE.

    Well, not sure if having the disk in a firewire case or over a network would have made a difference.
    The solution of making a disk image as in article http://support.apple.com/kb/TS2664 was what worked for me.
    After, mounting the disk image the Migration Assistant completed without errors. So far everything seems to be working like it did on 10.4.11.

  • Photos in my from my iPhone have same numbering as photos from my dig camera.  They all go into iPhoto fine but when I backup to my ext hard drive it will only save one with the name IMG 1002 and I have two separate images both with that name.  Help?

    Photos in my from my iPhone have the same numbering as photos from my digital camera.  They all go into iPhoto fine but when I backup to my ext hard drive it will only save one with the name IMG 1002 and I have two separate images both with that name.  How do I get them all to save on my ext hard drive and hope do I prevent this numbering overlap in the future?  I'm really hoping I don't have to go through and manually rename every single picture.  Thanks.

    How are you backing up the photos?  The best way is to backup the library itself as that will preserve your organizational efforts as well as all metadata like keywords, titles, faces, places, books, etc.
    You can use a backup application that does incremental backups.  Thus only the first backup is a full one and subsequent backups just copy those files that are new or changed. I use Synk Pro.  The lower cost version, Synk, will do the same job.  Other similar apps can be found at MacUpdate.com.  
    OR: upload your camera to a folder on the Desktop. There you can rename the files to something that is more informative than just the file name.  I use the date (international format) along with a brief desc: 2007-1-20-adian1stbday-001.jpg.  File renaming apps can also be found at MacUpdate.com.  Also you can give the folder an informatve name which will become the Event name when you import the folder of photos into iPhoto.
    OT

  • Pages 5.0 will not save documents created in Pages 09

    I have hundreds of important documents I created and saved in Pages 09.  I got a new Mac Mini running Mavericks 10.9.5 with the new Pages 5.0.  The new Pages will not save my Pages 09 documents.  Pages 09 will not save them either.  Help!

    1. Is it possible you installed from a demo installer and your 30 day trial period is up, when it goes into Read Only mode?
    2. Where and what was your purchased disk?
    3. Where are you saving to?
    4. Have you tried saving somewhere else eg an external hard drive and see what happens then?
    5. The auto-saving issue with Pages 5.2.2 could be problems with iCloud and online access.
    Peter

  • Photoshop CS6 - Batch function will not save files

    OK, I have used the "Automate/Batch" function well over a hundred times, so this situation (first time using it in CS6) is VERY frustrating!
    Running Adobe CS6 extended v. 13.0.1 x32 on a Win XP sp3 OS.
    I have a slew of photos that need nothing done except to resize from the native file size to 6 in x 4 in @ 150 ppi and save into a new folder (to not override the original).  I have recorded the action multiple times now and each time I run the action, the files do not save! Here are the various parameters I've used:
    Attempt #1:
         Action Steps Recorded -
    Open
    Save for web (set size parameters here)
    Close
          Batch settings -
    Play Set: correct folder selected; Action: correct action selected
    Source: folder - selected folder where native files are located (on desktop)
    NO checkmarks next to any options
    Destination: folder - selected folder where small files should be saved (on desktop)
    NO checkmark on override action
    Did not change file naming parameters
    Result #1 - DID NOT SAVE FILES
    Attempt #2:
         Action Steps Recorded -
    Open
    Save for web (set size parameters here)
    Close
         Batch settings -
    Play Set: correct folder selected; Action: correct action selected
    Source: folder - selected folder where native files are located (on desktop)
    Cehckmark override Action "Open" commands
    Destination: folder - selected folder where small files should be saved (on desktop)
    NO checkmark on override action
    Did not change file naming parameters
    Result #2 - DID NOT SAVE FILES
    Attempt #3:
         Action Steps Recorded -
    Open
    Save for web (set size parameters here)
    Close
          Batch settings -
    Play Set: correct folder selected; Action: correct action selected
    Source: folder - selected folder where native files are located (on desktop)
    Checkmark override action "Open" commands
    Destination: folder - selected folder where small files should be saved (on desktop) 
    Checkmark override action "Save As" commands
    Did not change file naming parameters
    Result #3- DID NOT SAVE FILES
    Attempt #4:
         Action Steps Recorded -
    Open
    Image Size (set parameters here)
    Save as (set folder location here)
    Close
         Batch settings -
    Play Set: correct folder selected; Action: correct action selected
    Source: folder - selected folder where native files are located (on desktop)
    Checkmark override Action "Open" commands
    Destination: folder - selected folder where small files should be saved (on desktop) 
    NO checkmark on override action
    Did not change file naming parameters
    Result #4- DID NOT SAVE FILES
    Attempt #5:
         Action Steps Recorded -
    Open
    Image Size (set parameters here)
    Save as (set folder location here)
    Close
           Batch settings - 
    Play Set: correct folder selected; Action: correct action selected
    Source: folder - selected folder where native files are located (on desktop)
    Checkmark override action "Open" commands
    Destination: folder - selected folder where small files should be saved (on desktop) 
    Checkmark override action "Save As" commands
    Did not change file naming parameters
    Result #5- DID NOT SAVE FILES
    Please help!  This has never been a problem before CS6 and I truly am at my wits end trying to figure out why the files will not save.  I have several hundred files that I need to run this on, so doing it individually is not an option.
    Thanks in advance for any and all insights!

    I'm having a problem with Automating > Batch as well. Strange enough, I did a batch of other photos and it worked fine. Selecting a new set of folders is not working at all; the files simply pop open and then close but the destination folder remains empty. It also doesn't appear the actions are occuring since I don't see them highlighting as the automation runs. I have no idea why it would work then not. BTW, "Override Action "Save As" is unchecked.
    ~CG
    UPDATE: I put a "save as" command at the beginning of the action, then checked the "Override Action "Save As" box and it somehow works now, but not before stalling on an image (normally the last in the folder) and complaining that the image was being used in another program. The only other program opened was Bridge so I'm unsure why it had a problem. I closed both programs and ran the automation with nothing else opened and it worked ... ?? Confused, but not complaining (for now).

Maybe you are looking for