Will my X-Fi remember its settings after Windows reinsta

Hello,
I have a Creative Sound Blaster X-Fi XtremeMusic and have used the Creative Audio Console to configure the card accordingly for my speakers (Logitech Z-2300). If I reinstall Windows XP, will the sound card remember it's settings when I reinstall the drivers or am I going to have to fiddle around with the settings again?
Thanks in advance

kmkenney wrote:
I had to turn CMSS-3DVirtual off in order for everything to sound alright - I'm wondering if this is saved at all on the hard dri've or if its a setting that is applied at the card level. I don't use any graphical equalizer for the card, just the Creative Audio Console that comes with the latest drivers from the website.
I format frequently so not having this saved is going to be a real pain in the ***.
You don't need to wonder anything if you try make a copy of that PCI_BUSXXXX-X-XXXXXXXX-XXXX.dat file mentioned and try as instructed ?
If you don't find that file, then AC does not save it's settings into that location but maybe into registry --> just search the registry after AC settings and if founs, export that registry data to a .reg file --> you can then later restore that data by double_clicking the .reg file you saved.
jutapaMessage Edited by jutapa on 09-23-2006 :2 PM

Similar Messages

Why wont my xfce4-panel remember its settings?

I'm using xfce4-panel in Compiz Standalone, so there is no xfce-session manager or anything.
I put the clock plugin on it and changed the display to digital, but it just wont remember its settings when I close and reopen it.

If you are exiting the panel via ending your Compiz/X session, then Xfce Panel will not save its settings because Compiz does not gracefully end its process before it terminates and the panel crashes.
You will need to exit the panel from its Exit menu in order for Xfce Panel to save its settings, then re-launch it.

Safari 5.0.5 OSX not remembering cookie settings after reboot

Hi everyone,
I'm having a very frustrating issue lately with Safari 5.0.5 on my MBP with OSX 10.6.7...
I want to have my cookie settings under Preferences -> Security -> Accept Cookies to permanently be "Only from sites I visit". When I started Safari, and set that setting, it will remember the setting for the entire machines' session. However, if I reboot, or shutdown/restart my Mac, it will revert to the Always setting.
I have tried trashing the Safari plist file under ~/Library/Preferences/, and trashing the associated caches.db file as well, hence resetting Safari, with no success.
Any advice on this would be greatly appreaciated!
Cheers

Hi Andy,
I just tried to temporarily remove Safari Cookies, and I'm sad to say the old issue re-occured as soon as the add-on gets uninstalled.
It seems also, that after launching Safari for the first time after a reboot and going into Safari Preferences fast enough before the add-on launches, the setting is still incorrect, but then gets modified by Safari Cookies.
I went and checked my Login Items, but there's nothing there that can affect Safari; the list hasn't changed in a long time. I don't have folders .../InputManagers or .../ScriptingAdditions under Home/Library.
Under .../LaunchAgents, I have the following:
com.adobe.AAM.Updater-1.0.plist
com.adobe.ARM.df0ab5bbe6f698196fcc21e3c1e66dcb758bd911f4d637272d9d8109.plist
com.apple.CSConfigDotMacCert-<blocked>-SharedServices.Agent.plist
com.apple.FolderActions.enabled.plist
com.apple.FolderActions.folders.plist
com.apple.FTMonitor.plist
com.apple.imagent.plist
com.apple.marcoagent.plist
com.google.GoogleContactSyncAgent.plist
com.google.keystone.agent.plist
`
The first three are related to my Adobe CS5 and Acrobat X Pro installations.
Now that I have the add-on which seems to keep things in check, this isn't as high a priority as it was, but I would definitely love to find out what's causing this so I can eventually nip it in the butt!
Cheers

E51 Settings Wizard lost its settings after Phone ...

Hi
Really stuck now, cant define access points.
After updating my E51 to 200.34.36, I lost my access points.
No problem, let settings wizard redo it.
Problem is, when I try, the options have dissapeared, and will only let me setup my email!
Where can I find a good copy of settings wizard please, that works.
Thanks

Thats the first place I tried.
Unfortunately, it offers no help at all, recommending I try the Sett Wizard to configure my settings. THATS whats broken
Anyway, I figured a way to do this, had to *#7370# TWICE before the phone actually reset itself correctly, and on bootup, reconfigured the settings tables. Its all ok now
Thanks

[Solved] qtconfig doesn't remember its settings

I want to adjust the fonts used by Qt4 applications -- when I fire up qtconfig (/usr/bin/qtconfig) I can make the changes and they apply to qtconfig's window but not to other apps' windows. The next time I open qtconfig it's back to its previous settings. This isn't an issue with Qt3's config (/opt/qt/bin/qtconfig) and my Qt3 apps look the way I want them.
It looks like there must be something preventing qtconfig to write the new configuration to some file -- but I haven't got an idea what file this should be and where and what could prevent it. Any ideas on where I should start looking are welcome.
EDIT: rm ~/.config/Trolltech.conf and re-configuring Qt via qtconfig did the job.
Last edited by Oxyd (2008-10-05 17:05:55)

None of those two methods worked for me.
In my case there is symbol font set in the qt and I can't use qt apps, because I dont see any font, only symbols.
No sudo or deleting helped, I really need forexample skype.
How to fix it ?
//EDIT:
[Partial Fix]
Other than gtk theme needs to be used. If you have symbol fonts as me. then it is the first rolling menu, and choose first, then go to second tab and change first rolling menu(it is fonts). Then click exit up right and one of the three appeared button says yes, save configuration.
In this example, there is a font change.
But theme change needs to be done first.
http://hosting11.imagecross.com/image-h … qtFont.png
Last edited by akumixx (2011-12-23 12:36:28)

Lenovo G50-30 Unable to access BIOS settings after Windows recovery

Hi
I recently 'downgraded' a recently purchased Lenovo G50-30 with preinstalled Windows 8.1 to Windows 7 using a UEFI USB install on a GPT partition. I also updated the BIOS from A7CN40WW to the latest A7CN43WW and all was working fine. However, after performing a necessary restore of an system image created using the Windows 7 backup and restore tool, I am suddenly unable to access the BIOS settings, either with the novo button (I do get the menu to select BIOS) or with Fn +F2. All that happens is that I receive a blank screen with a static cursor in the upper left corner. I can however still access the boot menu Fn +F12. This is a particular pain as I obviousl can't select USB 3.0 in BIOS.
Any help here would be greatly appreciated.

OK, I managed to clear CMOS by disassembling and desoldering a leg off the the RTC battery but to no avail. The problem seems to be that BIOS a7cn43ww itself has somehow been corupted. In theory this should be able to be resolved by a reflash. The trouble here is there seems to be no way to reflash with a current or previous BIOS version, so I'll have to either wait for a newer version or someone may know better.
C'mon Lenovo support this simply isn't good enough. It's a brand new laptop and I'm considering returning it for a refund.

Synaptics touchpad doesn't save scroll settings after Windows 10 upgrade

Since the Windows 10 upgrade (upgraded from 7), the Synaptics Touchpad does not save scroll settings. Every time I shut down and restart the machine the next day, I have to go into settings to re-enable touchpad scrolling. It's always unchecked on restart. Please advise on how to fix this!

My solution, copied from one of many threads regarding this problem - You have Synaptics Port Touchpad driver installed via Windows Update. Here's is a work around until a fully Win10 compatible driver is issued. Win+X/ Device Manager/ Mice and other pointing devices/ Synaptics PS/2 Port TouchPad. R click/ Update Driver Software/ Browse my computer for driver software / Let me pick from a list of device drivers on my computer. Select the top or latest version of Synaptics PS/2 Port Compatible Touchpad Version 19.0.12.95 (7/15/2015) / Next and driver will install automatically. Reboot to finish install. Go to Settings/ Mouse Properties/ Synaptics Device Settings to access Touchpad settings, adjust to your liking/ Apply/ OK. Advise to tick 'Static tray icon in taskbar' for easy access to the settings tab until you're completely happy. This 19.0.12.95 is the latest one on the HP site for my model (your # may vary) and it installs 2 versions. The one Windows Update uses is the same date Port Touchpad version but the 'Compatible' one is installed at the same time. You can tell the difference immediately because it allows you to create a profile. The old 8.1 version did not and neither does the 'Compatible' one. The touchpad setting screens look the same as before (you'll notice the new one looks different and 3 finger press opens Cortana). Why do I consider this a workaround ? Because the 3-finger press app setting, one finger EdgeMotion and demo vids do not work. But at least you can set the scrolling, pinch zoom, speed and sensitivity to your liking and if you reboot, you'll see the system tray icon and your preferences have stuck. Hope this helps somebody !

WRV210 loses port forwarding settings after reboot

Along with wireless problems that have already been documented about this device I am having problems with port forwarding where it will lose all its settings after losing its power. I then try to go into the management for port forwarding and am not able to put the settings back in as every time I hit 'Save' it just loads the page back up with no settings applied. Another strange thing is that the protocol comboboxes only have options for UDP or Both.
I then reapply the latest firmware and am able to enter the settings again.
Any help would be greatly appreciated as I'm at my wits end with this one.
Thanks,
Paul

Dear Paul,
Thank you for reaching the Small Business Support Community.
If you are already running the latest firmware release version 2.0.1.5, all I can suggest you is to contact the Small Business Support Center directly to determine if this is a hardware related problem, notice this product is already End of Life/End of Support and therefore the support is subject to warranty or contract terms and conditions;
https://supportforums.cisco.com/community/netpro/small-business/sbcountrysupport
Please do not hesitate to reach me back if there is any further assistance I may help you with in the meantime.
Kind regards,
Jeffrey Rodriguez S. .:|:.:|:.
Cisco Customer Support Engineer
*Please rate the Post so other will know when an answer has been found.

HT1267 I need to reset my phone to it's original settings after backing it up, but it has been locked for months and I can NOT remember the password. What do I do??? It's an iPhone 4

I need to reset my phone to it's original settings after backing it up. It has been locked for several months and I do not remember the passcode. How do I do this??? HELP!!!

-Options for when an iOS device gets locked because of forgotten password-
Restore (and reset password) on your device by connecting it to the last computer to which it was connected:
iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414
If you cannot connect it to the computer to which the device was last connected you will have to use recovery mode to completely reset the device, losing all data:
iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device)

I downloaded new os for my daughter's ipod touch. I remember during setup after that I checked off my husband's email account and now she is receiving his texts. How do I fix this. The "icloud"/ "messages" buttons are both greyed out under settings

I downloaded new os for my daughter's ipod touch. I remember during setup after that I checked off my husband's email account and now she is receiving his texts. How do I fix this. The "icloud"/ "messages" buttons are both greyed out under settings

Forgotten RESTRICTIONS Passcode
- Restore from a backup that was make before you added the Restrictions passcode. If you restore from a backup made with the Restrictions passcode the Restrictions passcode is also restored.
- Restore to factory settings/new iPod.
- If you are up to file manipulation see:
How to reset forgotten Restrictions...: Apple Support Communities

New to the Apple and I want to set up a user account that will not delete the guest users files and allow and preserve their personal settings after log out. Is this possible?

New to the Apple and I want to set up a user account that will not delete the guest users files and allow and preserve their personal settings after log out. Is this possible?

The built-in guest user account will not do this. Simply create a new standard account and call it "Guest" or "Guest Users" or whatever you like.
Go to System Preferences > Users& Groups, click "+" to make a new account.

I am in process of restoring an iphone4 to its default settings after getting approval from my carrier to unlock it. Using itunes, it is saying "verifying iphone restore" and hasbeen stuck there for about 2 hours.

I amtrying to restore an iphone4 to its original default settings after obtaining approval from my carrier. I am using itunes and following instructions given. It has been stuck on "verifying iphone restore for about 1 1/2 hours with no movement in the bar across the phone itself. Task manager is showing very little activity. I have internet connectivity. Is this an issue here or with apple? Thanks.

Thanks. Finally unhooked the phone and then tried again. This time it went into recovery and reloaded all as it should have and gave me the "unlocked" message which was what i wanted to see! thanks

Will CUCM reboot on its own after installing ciscocm.refresh_upgrade_v1.1.cop.sgn

I'm upgrading a server to 8.6 and i've installed ciscocm.refresh_upgrade_v1.1.cop.sgn.
These were the last couple lines from the console:
02/23/2012 23:08:48 killing copstart.sh pid=31809
02/23/2012 23:08:48 Waiting for CLI/GUI to show cop install success before terminating all CLI/GUI sessions
02/23/2012 23:08:48
SUCCESS: Successful install of refresh_upgrade_v1.1. All GUI and CLI sessions will terminate shortly. Tomcat will be restarted, which can take several minutes.
02/23/2012 23:08:48
Successfully installed ciscocm.refresh_upgrade_v1.1.cop.sgn
A system reboot is required when the upgrade process completes or is canceled. This will ensure services affected by the upgrade process are functioning properly.
admin:
Broadcast message from root (Thu Feb 23 23:09:04 2012):
*** Warning: Terminating all CLI sessions NOW ***
Will the server reboot on its own, or do I need to manually initiate a restart myself?

Hi Michael,
Aaron is most correct here (No doubt +5)
The final reference you are seeing via the cli output;
A system reboot is required when the upgrade process completes or is canceled. This will ensure services affected by the upgrade process are functioning properly.
is in relation to the actual 8.6 upgrade process, not the refresh.cop
The details are in this great doc from Ryan;
https://supportforums.cisco.com/docs/DOC-16898
Cheers!
Rob

Airport Extreme will not allow me to access settings

I have an Airport Extreme (the new one with 801n) and wanted to add an USB hard drive to it. The system did not recognize the external drive. I tried to access the router settings using the airport software on my MacBook Pro. The software recognizes the router but will not access the settings. I get an error that the settings cannot be accessed. I then did a soft resst with no luck. I finally did a hard reset and I still cannot access the router settings. I tried with an Ethernet cable direct, no luck. I can still access the internet through the router but that is it. The router has the latest firmware 7.1.1 don’t know what to do next.

When changing ISPs (or networking equipment) it's always a good idea to start from "scratch" in configuring your equipment.
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Power-up the modem; wait at least 10-15 minutes.
Power-up the base station; wait at least 5-10 minutes.
Power-up your computer(s).
In this basic configuration, computers connected to the base station, either by wire or wireless (as appropriate for the base station type), should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options.

After downloading ios 8 on my i pad air 16 GB, my i pad keeps on restarting on its own after some time? any idea how can it be rectified?

after downloading ios 8 on my i pad air 16 GB, my i pad keeps on restarting on its own after some time? any idea how can it be rectified?

Please tell me that it has NEVER been jailbroke. If it has not been jailbroke, here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this.

Will my X-Fi remember its settings after Windows reinsta

Similar Messages

Maybe you are looking for