Will Transport Request have problem?

Hi Experts,
Please consider the below scenario.
User A doesn't have authorization to activate a structure for extending standard SAP table.
User B have access to activate the structure for extending standard SAP table.
This is what i have in a Transport request.
TR1 (User A)
-->Task1 (User B)
User B activated the structure to extend standard SAP table in the Task1 (which is under TR1 of user A).
When the TR1(User A) is moved to other server, Does the standard SAP table be extended?
Note : User A doesn't have authorization to active the structure to extend standard SAP table.
I believe the TR will be moved successfully to other server and standard SAP table will be extended even the TR is created by User A who doesn't have authorization to extend SAP table.
Please advice << Removed >>....
-RK
Edited by: Rob Burbank on May 14, 2009 5:01 PM

My usual reply to such questions is: try yourself and please let us know the result!
My guess is: yes it will be appended, because the change was obviously done by somebody with the appropriate authorization, the outer transport request is just a vehicle to move the changes, and the import is likely done via the DDIC user which should have SAP_ALL or similar authorization.
Thomas

Similar Messages

Transport request save problem

hi
we are using SAP ECC system. whenever i am doing some config changes and saves it system is asking for customizing request. when i give the request number and clicks on ok, system is taking me to solution manager login screen. how do i rectify that. is there any setting i need to deactivate/activate? please advise.
thanks

I believe if you go into transaction SM59 there should be RFC destinations named TMSADM@<servername> which connects the transport system.
Depending on your security requirements of your organization, you can use a system user to connect all the time by typing in the name and password then save it or use the "current user" button which will use the authorization of who is accessing the transport system.
Hope this helps!

Problem with "Create Transport Request"

Hi all,
Iu2019m working with Solution Manager and Charm. I have a problem when I create a transport request.
After that I put regular correction into status u201CIn developmentu201D I choose u201CCreate Transport Requestu201D from the menu but the system display the message u201CThe last action triggered is locked in the task listu201D . Is it a problem of authorization in satellite system? The user that I use to create a transport request have sap_all profile in the satellite system. What settings do I have to use in satellite system and in solution manager?
Thank in advance
giovanni

Make sure that the profile S_TMW_IMPORT and S_TMW_CREATE has the correction authorizations assigned and that it is assigned to the user TMSADM of client 000 of your satellite system.
Note 807228 can be useful.
Hope this helps,
Roel

CHARM : Sequence of transport request to import

Hi,
I'm configuring CHARM and found out below issue.
Scenario.
1) Charm project with project type implementation was created in SOLMAN. The type of change is normal correction. All transport request was created under 1 task plan. The transport was created based on configuration and some of the transport request have dependency to others transport request.
For example.
a)GL account need to be created in FI and was assigned to TR002.
b) MM need to configure the GL account that was created in a) and was assign to TR001
Issue
When the TR was release, how do we ensure that the sequence of import to QAS client and PRD client must follow the dependency of the TR created?
Appreciate your input.
regards,
Biah

Hi Sir,
I am working in SAP Solution Manager. I would like to know some concepts regarding CHaRM:
Currently our project is using Transoport Proposal. We will soon shift using CHaRM. But I am not aware of the Technical concepts.
1. How to configure CHaRM with the Tranport Proposal Flow.
2. How to navigate in CHaRM? (screenshots can help).
3. I am aware of the process but still after creating a CHaRM how do the Developer navigate to do a change in DEV system.
will he go through CHaRM. (please explain me).
4. Also explain me the total process from technical point of view till the CHaRM closure.
5. I am aware of SOLMAN in this process where the Charm requests are collected and monitored.
Hope I will get a good guidance from your end....

Transport Request Confirmation in CHARM

Dears,
I recently configured CHARM,Complted cycle of normal correction.
Now I logged on QAS and PRD not by solman but from them only but i didn't find request in mport queue of these systems even if i from SE01 of dev,I am able to see that these transport requests have implemented.
Now as I am understanding as these transport requests were implemented from different domain via domain link so might be i am not finding them in import queue,So please confirm from where I can check that these transports are imported successfully.
Shivam Mittal

Imports which have been triggered from the task list in Solution Manager will be removed from import queue after successful import.
Go to tx: STMS -> Import Queue and use "import history" to view imported requests.
You can also view the import history in Solution Manager using the task list (tx: SCMA).
/cheers

Transport Request Information

Dear All,
I have three systems landscape. My quality server having 4 clients. During the transport. I have transported all transport requests to all clients to make them sysnc.
I would like to know that which transport requests have gone to which clients. Please tell me the table name from where I can download the data and make my comparision.
Regards
Vimal

Check tables E070, E071 and E070C,
E070 - Stores transport headers
E071 - The names of the objects of a transport request is stored in table.
E070C - stores information for client specific tarnsports
This will help you out.

Tables to find Transport Requested Released, Transported?

Dear all
I am using STMS and Se10 to check which of my Transport Requests have been transported from
1. Golden Client go to 2. QAS, and then from 2. QAS goes to 3. Production.
Please advise.
Thanks

Hello,
You can use import histroty in the STMS or stms_import. It shows all the details.
Regards,
Gowrinadh

Transport request from BIQ to BIP

Hi SAP Gurus,
Can anyone please tell me how can I find out
those Transport requets which are in BIQ but not imported
into BIP?
Regards

HI,
In STMS_IMPORT some transport request have status as tick mark some as Green or yellow status. The status which are in Tick mark is imported to production. Hope you can check that option which may help you filtering on that field.
Thannks,
Arun

Problem in extended Transport control while setting up transport request.

I created a BDC program which will create a database table upon executing..
The problem is the program worked well since yesterday, But today when i executed it , it is showing a information message when creating a new transport request .
Extended transport control is not active:
Cannot specify target client
Since it s a recording ,and all the windows are processed using an OK CODE, this info box comes all of a sudden .I dont kno what went wrong , coz it was working fine the previous day.
i could not create a new workbench request even after ignoring that info message.
Pl suggest me what could be wrong.

This message has a long text, please read it.
Check with your system administrators, if they have changed anything regarding the transport process.
In addition, instead of using "fragile" recordings, try using function modules like DDIF_TABL_PUT.
Thomas

Problem in tables of transport request !!!!

Hi all,
When i doing the Charm Process....nd during that when the developer generates the transport request....at that time that tp request appears in table /tmwflow/trordhc but it does not appear in /tmwflow/track .... nd after releasing the subtasks and then finally the whole transport request....at that point also it does not appear in /tmwflow/track ..... after this when the basis person pass that transport request to quality....then the /tmwflow/track shows 1 record for that transport request.....so finally after the whole flow /tmwflow/track will show 2 records for that transport request i.e 1 of quality and 1 of production....logically 'dev' record should also be there.....what i am noticing is after few hours like 2 or 3 hours that development record started appearing in table /tmwflow/track .... so is it a problem in configuration of solution manager or this sudden appearance of dev record is ok....coz ive to build a report in which it displays the tracking of tp requests....
Any suggestions would be helpful...
Regards,
Deadlocks

Hey deadlocks,
many ChaRM tables are updated as Fernando said when cmssyscol job finished.
I guess those 2/3 hours correspond to the time u waited before the job runned. The transaction solar_eval and a couple of others allow u updating data as well.
U have to know that this job may sometimes/quite often give unsupected/missing data; and also delayed. The best you can do is simply read the tr log using a function modul and interpretate info concerning the transport requests
    CALL FUNCTION 'TRINT_TDR_USER_COMMAND'
      EXPORTING
        iv_object = lv_object
        iv_type    = ls_sel_node-type
        iv_command = lv_command
      IMPORTING
        ev_exit    = pv_exit.
LV_OBJECT                                             SLMK900004
LS_SEL_NODE-TYPE                                     REQU
LV_COMMAND                                             TAST
for example.
You can debug log reading in SE01 and put a watchpoint on instruction 'CALL FUNCTION'. It is the second one.
This will display log on screen
Good luck
Khalil

Transport request main task releasing problem

Hi friends,
Environment is Linux, ECC5.0, Two system landscape,
I have problem with Transport Request task releasing when I am going to release the subtask that willbe released success fully when I am trying to releasing the main task that task is not released and at that time the system wil hang( mesg on the status bar is tp is connected success fully) thats it we wait for long time then also that looks thats only no log will be generating in usr/sap/trans/log there will be a log on this one that log is
WARNING:/usr/sap/trans/tmp/<username.LOS>is already in use (10), I'm waiting 3 sec(20070326124305). My name:pid 7265 on test(sd1adm)
after saw the this mesg I kill the 7265 pid then also same proablem.
I change the ownet of the request then the request is released but not uppeard in the import que. whn i am trying to import in que as manually that will appear in que but not importing when i press the import button the error is tp error 0203.
I check the both users authorizations also bothe authorizations also same then why it wil happening ???
then I check the nfc also that service also running ok the six services are 1.off 2.off 3.on 4. on 5.on 6.off.
I mount the trans dir also the mounting points also ok tms configuration is also ok
wt can i do plz help me with ur valuable suggessions
Thankyou
Ranjith

Hello Ranjith,
This is usually because the tp transport buffer lock file remains locked by the
operating system (OS).
You should be able to move or delete this file from the DIR_TRANS/tmp dir.
After that the tp should run fine after.
Thanks,
George

The transport request is running all the time, what is the problem

I have a transport request which can transport from DEV to QAS successfully ,but failed when the request transport to PRD, I found the request running for several hours. I do not know what the problem? how can I check this problem?
need your help thanks

Hi
The background job Rddimpdp is not scheduled in the system for client 000...And you want to investigate what happend to the job..
The background job details are kept in table TBTCO..So if you goto SE16 and try to choose the fields which are of your interest..as it(this table) has lot of fields. And in this we have fields like last run time,scheduled by,last job change time etc.So with the above information i hope you will be able to get the information you want.
And if everything is fine ..the backgrouns job alone can vanish someone manually might have done done something ..and that can be found out by above investigation on the table.
Hope this info helps...
Regards
Vani

Transport request problem with a ztable

Hello,
I have some problems releasing a customizing transport request. It contains "table contents" of a z table. This z table is marked as "customizing table" (option C).
Error message is "task desk900213 belongs to a different category"
Thanks.

Hi Alberto,
What type of request are you using. Also let me know the classification of task.
I mean if you a workbench request is giving this error then try using a customising one and if a customising one is giving this error try using workbench transport.
I guess this is related to the thread:
Re: change object transport order
Also I hope you have assigned a development class to the Z table.
Please award points accordingly.
Regards.
Ruchit.
Message was edited by:
Ruchit Khushu

PROBLEM IN RELEASING TRANSPORT REQUEST THROUGH SE10

Dear all,
I am trying to release transport request of development server via. transaction se10.Now my problem is that the child(DEVELOPMENT/CORRECTION) is getting released while the parent request is not getting released.
I checked everything and its showing 'test call of transport control program ended with return code 0208.' I even checked overview of system,overview of connection type,over view of transport protocol and they are fine.my only doubt is after going to se10 when I click transport proposals its showing "WORK FLOW NOT ACTIVE' .
Is my problem is because of this. Please help its very urgent as due to this I am not even able to transport any request on production server.
Helpful contribution will be duly rewarded.
Thanks & Regards,
VICKY

hi
vicky just went through your Query regarding release
of requests..first of all U be sure of TMS configuration
see whether it is consistent or not.then after Refresh
the system and then come to release of requests.
its true that we can transport through scc1 but first
check about STMS configuration and the way you set
that.
Regards
manjula.

Problem during import of 121 transport requests to productive system

Hello
We have problem during import of transport requests to productive system. Import of 121 transport requests stopped very soon in phase "N" (in TRBAT I have only one entry and in TRJOB as well).
In sm50 there is an BGD running under user DDIC in client 000 now for 14453 seconds (program SAPLSDB2). This should be import.
In SM37 I can see it as job "RDDGEN0L" with repport"RDDGENBB". Based on some literature it should perform "Converting all structure changes generated by the import and recorded in table TBATG, other than the structure changes to matchcode objects." Very interesting that TBATG has only four entries related to 2 indexes in table "DFKKOPK" , one in table "DFKKREP06" and one" ENQU" for EFKKEXC". (only this last one has not status error)
For fist two indexes I know they are not present as objects "LIMU""INDX" in any transport request beeing imported.
Also on productive system there is no"VOL" and "ZOL"indexes for table "DFKKOPK"(instead they are created on test system ie. not transported from development to test system)
Last command for that process is "CREATE INDEX "DFKKOPK~HKO" ON "DFKKOPK" ("MANDT", "HKONT", "OPBEL") PCTFREE 10 INITRANS 002 TABLESPACE PSA
PTR3 STORAGE (INITIAL 0000000016 K NEXT 0000000016 K MINEXTENTS 0000000001 MAXEXTENTS UNLIMITED PCTINCREAS"
There is enaught space on disk and in tablespaces (it is an oracle/HPux server).
Does anyone knows workaroun to solve production

are you importing these transport requests simultaneously into production?
I would suggest you try doing in smaller groups of 5 or 10 and then see whether you are able to import the requests
Rohit

Will Transport Request have problem?

Similar Messages

Maybe you are looking for