Will Windows fail to work when leopard is released

My question is just that... will windows stop working properly when bootcamp expires. Ive noticed some odd program crashes lately, that didnt happen b4

You are still using Tiger then?
If so, then you need not worry. The Boot Camp Assistant will expire, probably at the end of this year, but your Windows installation should still work. The only thing is you won't be able to update your drivers unless you get Leopard.
By the way, Leopard has already been released on October 26.

Similar Messages

Will content bundler stop working when the pre-release program is over?

The workflow for content bundler seems to be so much faster than folio builder. Will we still be able to use content bundler when the pre-release program ends?

Thanks for all the applications so far.
Those of you who already applied: Please check your email inbox for the email you supplied for an invitation email from us.
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

In my wife's window, the sound works, when I switch over to my window the sound doesn't work. I noticed the problem when I went to a YouTube video. How do I correct this?

In my wife's window, the sound works, when I switch over to my window the sound doesn't work. I noticed the problem when I went to a YouTube video. How do I correct this?

Hello Kiira Doon,
The troubleshooting steps detailed below may help get your iPhone's display to function.
Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
Try turning iPhone off and then on again.
While connected to the iPhone charger, try to reset the iPhone.
If the low-battery screen appears, charge the iPhone.
My issue is still not resolved. What do I do next?Contact Apple Support.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Allen

Will the iPod touch work with Leopard?

As I narrow in on my purchase, I have one last question. I upgraded my Powerbook G4 to Leopard. Will the iPod Touch work with Leopard?

Yes.

Will my programs still work when upgrading to 10.6?

I am using a MacPro with 10.5 and I want to upgrade to 10.6 but the thing is that I have some programs that I use continuously but I didn't pay for them (if you know what I mean...). Will these programs still work when I upgrade to 10.6?

10.6 is Intel only. To continue the use of older non-Intel software, that software must work with Rosetta emulation (which almost evrything does). Be sure that when you are installing 10.6, the option to add Rosetta emulation to Mac OS X 10.6 is selected.
I do not know what you mean by your comments, but if this computer is being used for Business purposes, you are taking a huge risk that someone can come after you Business profits.
"Don't bet your business on 'borrowed' software."

Will my older apps work when I update to OS7 on my iPhone and iPad

Will my older apps work when I update to OS7 on my iPhone and iPad

Yes, they all should. If you have not been updating regularly, you may want to check for updates after upgrading iOS 7 as there have been a flurry of app updates lately with specific feature or bug fixes specifically for iOS 7.

Internet working in windows xp, not working in leopard (dual boot)

i have a problem with connecting to the internet in leopard, but not in windows xp. i'm on a dual boot machine (mac mini g5 1.66).
the problem started in an odd way:
everything was working fine, i left the computer open for a few hours (fell asleep) and when I came back I couldn't connect to the internet whatever browser I was using. I restarted the computer in windows and it works fine. Obviously this is not a problem related to the modem or the cables - something must have changed in Leopard. But I did not install any program recently.
I checked the Network tab in System Pref - nothing wrong, I checked disk permissions and corrected them - no change, I checked for unusual threads or processes in Activity Monitor - nothing.
I tried using the Network Utility and sent a few pings, but it's not working. However, both the Network Utility and Activity Monitor report outgoing and incoming packets of data, as if the connection were working.
Can you help me solve this problem without reinstalling the entire operating system? Thanks.

Is there anyone who knows the networking workings in Leopard to help me identify the problem??
I have no modem problem, since I can use the same system in dual boot with Windows XP. The problem must be a file or a setting in Leopard that is blocking my connection to the internet.
I dunno, it could be related to Java or how some scripts are executed by the operating system.
If I don't solve this one, I'll have to reinstall the whole system again. Come on, help me guys!

I am having trouble with my speakers not working while online in particular on windows.My audio works when playing audio files

I am having trouble with my speakers not working while online particular on facebook. My audio works when playing audio files.

Hi,
Did it happen all the time or sometime?
Please check online browser status:
Click Volume icon in the taskbar, click Mixer link button as below:
If it's fine, follow this guide to run troubleshooter to detect and fix the issue:
Tips for fixing common sound problems
http://windows.microsoft.com/en-in/windows/tips-fixing-common-sound-problems#tips-fixing-common-sound-problems=windows-7
Meanwhile, this similar thread also could be referred:
https://social.technet.microsoft.com/forums/ie/en-US/a4a1cfe5-93a5-4c0b-9bf6-f7db0304f2ba/no-sound-on-youtube-or-any-other-webpage
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

MacBook Pro will not charge, only works when plugged in.

My MacBook Pro says it is at 68% battery not charging but the source is coming from the power adapter. It hasnt gone down for the past day or so. Also it only works when it's plugged in and shuts down immediately when the charger is unplugged. I just bought a replacent cord and this started happening. Does anybody have a fix for this? Here is some of the System Information (I dont believe it is a battery failure problem though the system says its normal)
Charge Information:
Charge Remaining (mAh):          3201
Fully Charged:          No
Charging:          No
Full Charge Capacity (mAh):          4678
Health Information:
Cycle Count:          277
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          0
Voltage (mV):          11795
System Power Settings:
AC Power:
System Sleep Timer (Minutes):          10
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          10
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Wake on LAN:          Yes
Current Power Source:          Yes
Display Sleep Uses Dim:          Yes
PrioritizeNetworkReachabilityOverSleep:          0
Standby Delay:          4200
Standby Enabled:          0
Battery Power:
System Sleep Timer (Minutes):          10
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          2
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Display Sleep Uses Dim:          Yes
Reduce Brightness:          Yes
Standby Delay:          4200
Standby Enabled:          0
Hardware Configuration:
UPS Installed:          No
AC Charger Information:
Connected:          Yes
ID:          0x0100
Wattage (W):          60
Revision:          0x0000
Family:          0x00ba
Serial Number:          0x002b46f4
Charging:          No

Perform a SMC reset:
http://support.apple.com/kb/HT3964
If there is no improvement, make an appointment at an Apple store genius bar for a free diagnosis.
Ciao.

Bridge CS4 one Windows 7 stops working when trying to load pictures in a new file

Bridge starts fine but when i click on some files to see the pictures in there it stops working.
The message i get is:
"Adobe Bridge has stopped working
A problem caused the program to stop working correctly.
Windows will close the program and notify you if a solution is available."
I had problems with my XP x64 and CS4 bridge too and after formatting and installing windows 7 Ultimate (32 bit) i thought it would be solved ... but no such luck.
Any ideas what to do?
also not sure where to look for any error logging or something similar.
Oh having problems with itunes too as it will not start....., yea i know wrong forum but just incase someone has the same problem as i do
I appreciate your help

This is what i get from the event viewer:
Sorry i have no idea what to look for
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2010-02-06T01:28:23.000000000Z
EventRecordID
3309
Channel
Application
Computer
Workstation
Security
EventData
Bridge.exe
3.0.0.464
48b75dac
unknown
0.0.0.0
00000000
c0000005
041b15e1
d8c
01caa6cba0a860a8
C:\Program Files\Adobe\Adobe Bridge CS4\Bridge.exe
unknown
ea035ed1-12be-11df-9400-001fd08134a0

Mail fails to work when VPN'ed into server

We have a Mac Mini server running OS X Server (Mountain Lion recently upgraded from Snow Leopard Server). We have an external DNS service that points to the router that has a fix IP address, and the server has an internal fixed IP address from the router. We also run DNS on the mini server referencing this internal fixed IP address. Yes, the dreaded split brain.
We run our mail from the server. When a client is outside the local network (coming in from the Internet), incoming and outgoing mail to the server work fine. However, when VPN'ed in or on the local network directly, mail gets iffy, and SMTP never works.
sudo changeip -checkhostname resolves just fine.
I checked for console messages from the client machine, and the closest I could find to a mail message was:
8/15/12 1:34:39.102 PM Mail[282]: [<FQ server name>:636] Could not bind to server: Invalid DN syntax (ID 34)
and
8/15/12 1:34:40.702 PM Mail[282]: [<_LibSasl2SASLClient: 0x7fedd8c6f4e0> mechanism: PLAIN security layer: no] Failed to start the SASL connection
SASL(-1): generic failure:
Password Service log on the server does not yield anything.
Aside from this repeated warning (I'll solve this later) the SMTP logs have nothing interesting:
Aug 15 13:35:00 <FQ server name> postfix/cleanup[67032]: warning: recipient <_mailman> uid falls below minimum allowed: 78 < 501
I know it is probably some sort of DNS weirdness, but I don't know where to look! Server.app has no DNS error logs to look at.
Any help appreciated!

Hi - Is dns lookup set to all clients in Server.app DNS ?
To set logging for dns:
#look for the block below and change info to debug
#Ctrl x then Y then <ret>
#Stop and Start DNS in server.app or $ sudo serveradmin stop dns / $ sudo serveradmin start dns
#log is /Library/Logs/named.log and is available in Console.app
$ sudo nano /etc/named.conf
logging {
          channel "_default_log" {
                    file "/Library/Logs/named.log";
                    severity info;
                    print-time yes;
          category "default" {
                    "_default_log";
Good luck!

Windows explorer stopped working when trying to open a specific folder...and solution

I have had a problem with a specific folder or two on my computer, when I open the folder I get the error message that windows explorer has stopped working. It only happens with specific folders and everything else works fine.
I did a lot of reading to figure out a fix.
I finally tried right clicking the program explorer.exe located in C:Windows and chose "run as administrator" and this fixed the problem.
Note that the error message details list an application crash of windows.exe
I thought I would post this to help others. I don't know if this is the same problem some folks describe with a continual loop of the error message, problems opening the control panel or problems upon start up. But if you have a similar problem to the one I described try this very simple fix.
Cheers

I don't know what OS you are running, but under Windows 7 RC build 7100 the selection was ghosted to "run as administrator".
I was able to stop the problem from happening by right clicking the folder I was having problems with, selecting properties>customize tab and changing the "Optimize this folder for:" from Videos to General Items.
I know that this particular folder was optimized for general items from the beginning as I had just folders inside which were filled with videos. When I started to move videos into this parent folder to separate them later, this parent folder switched by itself
to being optimized for Videos. I'm not positive but I think that this was the time I started to have a problem with this folder until I did what I described above.
This is my very first post, so I hope I explained things well enough to be of help to someone.
Thanks
That's fixed my problem. Stopped responding every time I opened My Videos, changed the file properties to optimized for general and now the icons aren't thumbnail big but it doesn't crash now... Thank you, it was really starting to bug me.

Windows 7 only works when install disc is in the drive

Background:
Macbook Pro 7,1 (13 inch, bought in early 2011)
Mac OS X 10.6.8 (10K549)
Boot Camp Assistant 3.0.4 on Mac
Boot Camp 3.3 on Windows 7
Windows 7 is burned to a DVD. It was downloaded as an ISO through my school's Academic Alliance with Microsoft (a.k.a MSDNAA - Microsoft Development Network Academic Alliance).
Story:
I've been trying to get Boot Camp to put Windows 7 on my Mac for some time now. I've followed the manual/guides for my computer, which in short followed these steps:
Partition drive
Insert Windows 7 disc
Start installation
Install Windows
Download and install Windows updates
Insert OS X install disc
Install Boot Camp
Upgrade Boot Camp to 3.3
That all seems to work well and fine, but sometimes I would have problems where upon restarting I would have to hold the Option key to choose to load Windows, instead of Mac OS - that's fine. I would see the Windows drive and chose it, but then it would always freeze. Eventually I tried leaving the Windows 7 install disc in the disc drive and when I held the Option key I would see the Windows Install disc as an option to boot as well. I tried booting with that chosen, and everything would work fine. That's how I was able to do steps 5-8 in my above list (because whenever my computer had to restarted, I had to choose the Windows Install disc).
Now, with everything installed and updated, and with no disc in the disc drive, I started up my Mac and choose to boot Windows, but it freezes within 10-30 seconds of logging in (just like before). However, with the Windows 7 install disc inserted, and choosing to boot through it, it works. This doesn't seem right.
Anyone have any idea what's going on and how I might resolve this issue?
Thanks in advance; and let me know if I can provide any more information for you.

bought in early 2011
Those Macs do better wtih Lion drivers. Even if you install Lion not on internal drive but elsewhere.
A lot/most burned ISO like yours can even install but are bugged with problems if you didn't also do the burn at the slowest burn speed. Which sounds likely.
Last two: Windows partition was too small and doesn't have the free space for all the updates.
Finallhy, test RAM with memtest either Windows DVD which is a good way really, or from Terminial in OS X (where you can run dozens of little concurrent memtest windows and make short work even doing 5 loops x 256MB memory at once)

My computer stopped working when leopard installed

I installed Leopard tonight and once it was installed the setup (I think that is what it was) screen came up. I had to leave so I shut down my computer without doing anything- possibly my first mistake? I turned on my computer later and got the gray screen with the apple, then the apple disappeared and I got the NO symbol (circle with the line through it). I restarted over and over again, shut down, and still had the same result. When I got this symbol, my computer was dead silent, even the modem attached to the computer wasn't showing that a computer was connected. I restarted without the powerbook attached to the modem as well. I finally got the computer to start up by doing a safe boot. I am clueless about computers, so I don't even know what a safe boot is, but I read it in one of my older Mac books so thought I'd give it a try. Anyway, short of doing a safe boot every time I start my computer, what can I do to get it working properly. The only reason I upgraded to Leopard is because we moved and bought an airport express base station that required me to have at least 10.4 and I had 10.3.9 on my computer. sigh HELP!!!! Thank you.

I would try and startup the computer holding down the option key.
Give it some time and then you should be able to choose an OS X startup disk or Macintosh HD.
It sounds as though your system has not be "blessed"......
If it starts up, you then need to go to your System Preferences and then Startup Disk.
Choose your 10.5.1 Startup Disk...
The next time you restart you should not have any problems...
Let us know if this works for you.

Will windows remote desktop work w/iMacG5?

At work, I can have my PC viewed by another using the remote desktop feature. This is great when I have to fill in at someone else's office or station, and can work on my computer through theirs.
If I had Windows at home, I know I could work from my office desktop as long as I enter my IP address and follow all the right steps
But I just switched to a Mac at home. Is the WIndows remote compatable with Mac? I know there is some windows sharing commands that I have come across. Would appreciate idiot proof instructions if so.?

If I had Windows at home, I know I could work from my
office desktop as long as I enter my IP address and
follow all the right steps
Have you actually done it with a Windows PC ?
It is not as simple as that, especially if your work has a network with a router.
Either
Your home computer (Mac or PC) needs to be part of your work network via a VPN connection
Or
The work router has the relevant ports mapped to the remote office computer which may be something of a security risk. You would also need to know the office network's external IP address.
iFelix

Will Windows fail to work when leopard is released

Similar Messages

Maybe you are looking for