Wily Introscope 7.1 error
Dear all,
Facing a bizar issue.
I'm configuring Solution Manager Diagnostics (on Win2003 Server / IA64-bit, java 1.4.2_12) and installing Wily Introscope Enterprise Manager 7.1.
Did the installation as described in the setup guide; the ccms/wilyintroscope in /usr/sap is created, the windows service is created an running. But when checking the log (IntroscopeEnterpriseManager.log) to verify EM is running I don't find the line 'Server listening for incoming .... on port 6001'.
I also installed WebView on SAP NetWeaver and I'm able to display the login-screen, but i gives me the message 'This WebView instance is connected to the Enterprise Manager on unconnected.', while unconnected should be something like localhost.
Someone any idea?
Any help is highly appreciated!
Tnx
Roel
Hello,
I have the same problem.
Moreover, in the logs I have "The EM docs webapp could not be started"
Thanks for your reply !
Chakire
Similar Messages
-
Error while installing wily introscope 9.1.5.0
Dear Gurus,
While i tried to install the wily introscope 9.1.5.0, it ends with below error. please guide me to install.
Invalid External Component Package Specified
The specified package, /oracle/stage1/willy/osgiPackages.v9.1.5.0.unix.tar, is not the expected version. This Introscope installer expects version 9.1.5.0 of the external components package.
Edit the responsefile so that the externalComponentPackage property refers to version 9.1.5.0 of the external components package, then rerun the silent installer.
BalajiHi Divyanshu,
i copied the downloaded files in that stage directory and install it.
i used 797147 - Introscope Installation for SAP Customers for downloading the required setup files and for externel package is used Index of /ips/osgi/introscope_9.1.5.0
Balaji -
Wily Introscope Dashboard cannot be started: Silverlight Error 2104
Dear Gurus,
we have installed a DualStack SolMan 7.0 Ehp1 SPS23 on AIX/Oracle.
Diagonstics and WilyEM 8.2 is installed and running well, Data from Agetens SMD7.11 and IntroscopeBytecodeAgents data are displayed also in Wily Introscope Webview - Investigator tab.
Silverlight 4 is installed since last May.
Last week the regular Microsoft-Patching did on our FrontendWorkstations (WinXP SP3) with IE7
Additionally there was an upgrade of our SolMan Operating-System drom AIX5.3 to AIX6.1
During this update also an JAVA 1.5 was newely installed for WilyEM, and the parameter " "the VM to use for the next launch" in the lax-file points to this Java-Version: java full version "J2RE 1.5.0 IBM AIX build pap64dev-20091106a (SR11 )"
But today we recognized - after sucessfully start of Wily EM WebView - that there is a problem when we try to select one of the prepared Dashboards from SAP and press the "View"-Button:
We get an ErrorMessageBox from IE whichs saids:
"Silverlight error:"
"Error Type: InitializeError"
ErrorMessage:2104"
and no Dashboard comes up.
The same Error occours when we use antoher Browser ?
Can anybody please help ?
What could be the reason or solution for this kind of error ?
Thanks a lot !
StephanDear Mateus,
unfortunately I wasn't able to use your workaround successfully:
Even when I mark the "Consoile"-Tab and press the "Refreh"-Button to reload the Page, i still get the same Error-Messages...
Are there newer/other fixes available to solve this problem ?
Which fix do you mean exactly ? We currently run following version of WilyEM / WebView (from IntroscopeEMWebView.log)
10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] Introscope WebView Release 8.2.2.0 (Build 476364)
10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] Using Java VM version "IBM J9 VM 1.5.0" from IBM Corporation
10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] Using Introscope installation at: /usr/sap/ccms/wilyintroscope/.
10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] CA Wily Introscope(R) Version 8.2
10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] Copyright (c) 2010 CA. All Rights Reserved.
10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] Introscope(R) is a registered trademark of CA.
10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] Starting Introscope WebView...
10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] Introscope WebView started.
10/22/10 10:54:27 AM GMT+01:00 [INFO] [WebView.Login] Successfully logged in user "WilyWebView"
10/23/10 11:08:07 AM GMT+01:00 [ERROR] [WebView] java.lang.ClassCastException: org.apache.xml.dtm.ref.DTMManagerDefault incompatible with
org.apache.xml.dtm.DTMManager
10/23/10 11:08:18 AM GMT+01:00 [ERROR] [WebView] java.lang.ClassCastException: org.apache.xml.dtm.ref.DTMManagerDefault incompatible with
org.apache.xml.dtm.DTMManager
10/23/10 11:12:19 AM GMT+01:00 [ERROR] [WebView] java.lang.ClassCastException: org.apache.xml.dtm.ref.DTMManagerDefault incompatible with
org.apache.xml.dtm.DTMManager
10/23/10 11:12:34 AM GMT+01:00 [ERROR] [WebView] java.lang.ClassCastException: org.apache.xml.dtm.ref.DTMManagerDefault incompatible with
org.apache.xml.dtm.DTMManager
10/23/10 11:12:58 AM GMT+01:00 [ERROR] [WebView] java.lang.ClassCastException: org.apache.xml.dtm.ref.DTMManagerDefault incompatible with
org.apache.xml.dtm.DTMManager
Thanks,
Stephan -
Wily introscope 8.2.2 : unable to start due to JVM error
Hi,
I'm installing Wily introscope 8.2.2 for my Netweaver Solution Manager 7.01, on server Window 2008 x64.
I followed installation guide and I encountered a first "license error" to start Enterprise Manager that I resolved by installing SAP Management Modules.
Now, Enterprise manager still does not start because of JVM problem. Here is the EMService.log :
STATUS | wrapper | 2010/07/01 18:05:24 | --> Wrapper Started as Service
STATUS | wrapper | 2010/07/01 18:05:24 | Java Service Wrapper Standard Edition 32-bit 3.3.6
STATUS | wrapper | 2010/07/01 18:05:24 | Copyright (C) 1999-2009 Tanuki Software, Ltd. All Rights Reserved.
STATUS | wrapper | 2010/07/01 18:05:24 | http://wrapper.tanukisoftware.org
STATUS | wrapper | 2010/07/01 18:05:24 | Licensed to CA Wily Technology for Introscope Enterprise Manager
STATUS | wrapper | 2010/07/01 18:05:24 |
STATUS | wrapper | 2010/07/01 18:05:24 | Launching a JVM...
INFO | jvm 1 | 2010/07/01 18:05:24 | java.lang.NoClassDefFoundError: org/tanukisoftware/wrapper/WrapperSimpleApp
INFO | jvm 1 | 2010/07/01 18:05:24 | Exception in thread "main"
ERROR | wrapper | 2010/07/01 18:05:24 | JVM exited while loading the application.
STATUS | wrapper | 2010/07/01 18:05:29 | Launching a JVM...
INFO | jvm 2 | 2010/07/01 18:05:29 | java.lang.NoClassDefFoundError: org/tanukisoftware/wrapper/WrapperSimpleApp
INFO | jvm 2 | 2010/07/01 18:05:29 | Exception in thread "main"
ERROR | wrapper | 2010/07/01 18:05:29 | JVM exited while loading the application.
STATUS | wrapper | 2010/07/01 18:05:34 | Launching a JVM...
INFO | jvm 3 | 2010/07/01 18:05:34 | java.lang.NoClassDefFoundError: org/tanukisoftware/wrapper/WrapperSimpleApp
INFO | jvm 3 | 2010/07/01 18:05:34 | Exception in thread "main"
ERROR | wrapper | 2010/07/01 18:05:34 | JVM exited while loading the application.
STATUS | wrapper | 2010/07/01 18:05:39 | Launching a JVM...
INFO | jvm 4 | 2010/07/01 18:05:39 | java.lang.NoClassDefFoundError: org/tanukisoftware/wrapper/WrapperSimpleApp
INFO | jvm 4 | 2010/07/01 18:05:39 | Exception in thread "main"
ERROR | wrapper | 2010/07/01 18:05:39 | JVM exited while loading the application.
STATUS | wrapper | 2010/07/01 18:05:44 | Launching a JVM...
INFO | jvm 5 | 2010/07/01 18:05:44 | java.lang.NoClassDefFoundError: org/tanukisoftware/wrapper/WrapperSimpleApp
INFO | jvm 5 | 2010/07/01 18:05:45 | Exception in thread "main"
ERROR | wrapper | 2010/07/01 18:05:45 | JVM exited while loading the application.
FATAL | wrapper | 2010/07/01 18:05:45 | There were 5 failed launches in a row, each lasting less than 300 seconds. Giving up.
FATAL | wrapper | 2010/07/01 18:05:45 | There may be a configuration problem: please check the logs.
STATUS | wrapper | 2010/07/01 18:05:45 | <-- Wrapper Stopped
Regards,
Pascal LARRAT
Edited by: LARRAT Pascal on Jul 5, 2010 11:44 AMchange the properties of Wily.exe as 2003 Server compatible.
-
Error while installing Wily Introscope
Hi All,
I have installed introscope enterprise manager 8 in solution manager 7.0 (SP15). i have follwed the below steps:
1. Installation and Setup of SAP Solution Manager Server:
upgrading SAP Solution Manager Diagnostics (SMD) package
running Diagnostic setup wizard
everything went successful.
in the next step of wily introscope installation i have followed the below steps:
2. installing CA Wily Introscope
I. Download Third-Party External Component Package from CA Wily
II. elected Platform Independent Introscope Installer
III. Extracted the Introscope Installer
IV. Added the External Component Package
V. Started the Installer
VI. Verified the Installation
VII.Installed the SAP Management Modules
VIII.Ran the Enterprise Manager from OS level (AIX)
IX. Checked That Introscope Is Running Properly
X. Extracted the Introscope Agent
XI. Created an AutoProbe Connector
XII. Activated the Agent: Setting up Java VM Parameters -
here I am facing the issue
in the installation manual it has been given to add the below java parameters to server node:
-Xbootclasspath/p:/usr/sap/ccms/wily/connectors/connector.jar:/usr/sap/ccms/wily/Agent.jar
-Dcom.wily.introscope.agentProfile=/usr/sap/ccms/wily/IntroscopeAgent.profile
-Dcom.wily.introscope.agent.agentName=<AgentName>
i have added the above parameters and resterted the server then the java engine is not coming up. conflicting with the first parameter. once I remove that parameter I am able to up the java engine.
without being added the above parameters " the agent will not start".
please help me in this.
thanks in advance
Mohan KMohan,
I have the same problem. That is I set up the SMD on the managed system and completed the Managed system configuration through Solman which Installed Wily Introscope. With Wily enabled , the Java server process does not start.
If I delete the 3 lines that have wily in it, it starts OK.
How did you resolve this problem. Please let me know in detail.
Thank you.
Ravi -
Wily Introscope is not running in Solution Manager 7.1
Hello Experts,
wily Introscope is not running in solution manager system,
below error getting in log, solution manager is running on windows server and how to start wily in windows.
8/23/14 11:58:50.088 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
8/23/14 11:58:50.090 AM IST [INFO] [WrapperSimpleAppMain] [Manager]
****** CA Wily Introscope License ******
type = em-sap
rev = 30
cid = sap-ags
organization = SAP Active Global Support
reg-id = sap-end-user
email = none
sum = 27618b562bc2239e3cf71d9542c76df4
8/23/14 11:58:50.091 AM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
8/23/14 11:58:50.113 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
8/23/14 11:58:52.343 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
8/23/14 11:58:52.343 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
8/23/14 11:58:52.412 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
8/23/14 11:58:52.628 AM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
8/23/14 11:58:52.645 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
8/23/14 11:58:52.655 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager]
****** CA Wily Introscope License ******
type = em-sap
rev = 30
cid = sap-ags
organization = SAP Active Global Support
reg-id = sap-end-user
email = none
sum = 27618b562bc2239e3cf71d9542c76df4
8/23/14 12:02:31.586 PM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
8/23/14 12:02:31.602 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
8/23/14 12:02:31.958 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
8/23/14 12:02:31.959 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
8/23/14 12:02:32.030 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
8/23/14 12:02:32.287 PM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
8/23/14 12:02:32.306 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
8/23/14 12:02:32.321 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
8/23/14 12:37:05.225 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
8/23/14 12:37:05.227 PM IST [INFO] [WrapperSimpleAppMain] [Manager]
****** CA Wily Introscope License ******
type = em-sap
rev = 30
cid = sap-ags
organization = SAP Active Global Support
reg-id = sap-end-user
email = none
sum = 27618b562bc2239e3cf71d9542c76df4
8/23/14 12:37:05.228 PM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
8/23/14 12:37:05.249 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
8/23/14 12:37:05.644 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
8/23/14 12:37:05.644 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
8/23/14 12:37:05.728 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
8/23/14 12:37:05.994 PM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
8/23/14 12:37:06.014 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
8/23/14 12:37:06.028 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
Please assist me on this
Best Regards
HanumanHello Srivastav,
i am getting below problem in wily introscope log
9/01/14 11:22:02.675 AM IST [ERROR] [WrapperSimpleAppMain] [Manager.Acceptor] Failed to bind to server socket
java.net.BindException: Address already in use: bind
at sun.nio.ch.Net.bind(Native Method)
at sun.nio.ch.ServerSocketChannelImpl.bind(ServerSocketChannelImpl.java:126)
at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:59)
at com.wily.isengard.postofficehub.link.server.Acceptor.<init>(Acceptor.java:72)
at com.wily.isengard.postofficehub.link.server.ConnectionListenerFactory.create(ConnectionListenerFactory.java:31)
at com.wily.isengard.postoffice.server.PostOfficeHubServer.startIncomingConnectionListener(PostOfficeHubServer.java:261)
at com.wily.isengard.postoffice.server.PostOfficeHubServer.startAllIncomingConnectionListeners(PostOfficeHubServer.java:235)
at com.wily.isengard.postoffice.server.PostOfficeHubServer.acceptIncomingHubConnections(PostOfficeHubServer.java:103)
at com.wily.isengard.api.server.IsengardControllerServer.acceptIncomingConnections(IsengardControllerServer.java:207)
at com.wily.isengard.api.samplemain.SampleMain.acceptIncomingConnections(SampleMain.java:117)
at com.wily.introscope.server.enterprise.EnterpriseServer.initialize(EnterpriseServer.java:708)
at com.wily.introscope.server.enterprise.EnterpriseServer.doStart(EnterpriseServer.java:358)
at com.wily.util.ALifeCycle.start(ALifeCycle.java:86)
at com.wily.introscope.server.enterprise.EnterpriseServer.<init>(EnterpriseServer.java:301)
at com.wily.introscope.server.enterprise.EnterpriseServer.<init>(EnterpriseServer.java:280)
at com.wily.introscope.server.enterprise.EnterpriseServer.start(EnterpriseServer.java:1444)
at com.wily.introscope.em.internal.Activator.startEM(Activator.java:116)
at com.wily.introscope.em.internal.Application.start(Application.java:27)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:193)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)
at org.eclipse.equinox.launcher.Main.run(Main.java:1236)
at org.eclipse.equinox.launcher.Main.main(Main.java:1212)
at org.eclipse.core.launcher.Main.main(Main.java:30)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.tanukisoftware.wrapper.WrapperSimpleApp.run(WrapperSimpleApp.java:244)
at java.lang.Thread.run(Thread.java:662)
9/01/14 11:22:02.679 AM IST [INFO] [WrapperSimpleAppMain] [Manager.PostOfficeHub] Server listening for incoming default socket connections on port 6001
9/01/14 11:22:02.682 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Connection Initiator listening...
9/01/14 11:22:02.684 AM IST [INFO] [WrapperSimpleAppMain] [Manager.MMHotDeployEntity] Will monitor D:\usr\sap\CCMS\apmintroscope\deploy for new files every 60 seconds
9/01/14 11:22:02.685 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager started with management module warnings.
9/01/14 11:22:42.883 AM IST [INFO] [PO:main Mailman 1] [Manager.LoadBalancer] Loaded loadbalancing.xml
9/01/14 11:23:31.817 AM IST [INFO] [btpool0-1] [Manager] User "Admin" logged in successfully from host "localhost"
9/01/14 11:23:31.825 AM IST [INFO] [btpool0-1] [Manager] request.getContextPath() /webview
9/01/14 11:23:31.826 AM IST [INFO] [btpool0-1] [Manager] Login event Admin 1667ryb11leum 10.1.0.133 true
9/01/14 11:51:30.061 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409164200000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.063 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409077800000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.064 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409423400000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.066 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409337000000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.067 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409250600000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.088 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1406831400000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.089 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1408991400000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.090 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1408905000000.data seems to be OK - not sure what to do with append inputs
Please help me to sort this issue,
Best Regards,
Hanuman Chinthalwar -
Wily Introscope 8.2.2 - No License for Wrapper service
Hi All,
I've installed the Wily Introscope Manager 8.2.2. When starting the EM service, I get the following error message in the log file:
STATUS | wrapper | 2010/09/20 15:10:47 | --> Wrapper Started as Service
STATUS | wrapper | 2010/09/20 15:10:47 | Java Service Wrapper Standard Edition 32-bit 3.3.6
STATUS | wrapper | 2010/09/20 15:10:47 | Copyright (C) 1999-2009 Tanuki Software, Ltd. All Rights Reserved.
STATUS | wrapper | 2010/09/20 15:10:47 | http://wrapper.tanukisoftware.org
STATUS | wrapper | 2010/09/20 15:10:47 |
ERROR | wrapper | 2010/09/20 15:10:47 | License Error:
ERROR | wrapper | 2010/09/20 15:10:47 | A valid license was not found in the Wrapper configuration file.
ERROR | wrapper | 2010/09/20 15:10:47 |
ERROR | wrapper | 2010/09/20 15:10:47 | A license can be obtained from the Java Service Wrapper site:
ERROR | wrapper | 2010/09/20 15:10:47 | http://wrapper.tanukisoftware.org/doc/english/purchase.html
I believe that Wily is licensed as part of the Solution Manager Enterprise edition. So why do I need to buy an additional license?
Regards,
MasoudHi
For the Wily Introscope Enterprise Manager 8.2 the error you described
occurs if the em-include.conf file is missing in the EM' installation.
This file is included into the SAP managed modules SAPISMM02_0*.SAR
file.
Note that for Wily Introscope EM 8.2.2 you need to install the SAP
management modules after the installation of the EM 8.2.2 AND before
you attempt to start the service
Please refer to the Node 797147 for the documentation about the
the SAPISMM02_0*.SAR - management modules to be installed on top of
Enterprise Manager.
Please consider additionally the Note 1273028
- The Enterprise Manager can only be launched as Windows Service
after the latest management module package (SAPISMM) has been
installed. The SAPISMM package contains a file em-include.conf
which is required.
I would like to ask you to implement the Note 1273028 and to retest the
issue.
Best Regards
Jai Wardhan -
Wily Introscope Enterprise Manager fails to start due to Java Heap
Hello All,
I just installed Wily Introscope for the first time. I have successfully installed it from the log below:
Summary
Installation: Successfulwith errors.
396 Successes
0 Warnings
1 NonFatalErrors
0 FatalErrors
I also confirm that the Introscope Enterprise Manager is started as a service.
However, when i try to launch enterprise by following the path All Programs > CA Wily > Introscope 8.2.3.5 > Introscope Enterprise Manager....
I get the error below:
3/29/11 07:11:46 PM PDT [ERROR] [Manager.Bootstrap] Load all Management Modules FAILED.
3/29/11 07:11:46 PM PDT [ERROR] [Manager] The EM failed to start. Java heap space
I have also adapted my Java Heap from 512 to 1024 in EMService.conf file but I still get same error. This was the recommendation in this related forum post - Wily Introscope - EM failed to start
Please help!!!!Hello,
Like I said, I have increased the value to 1024MB and still not starting.
The corresponding section of the EMService is pasted below:
Wrapper Properties
Java Application
wrapper.java.command=jre
bin
java.exe
wrapper.working.dir=.\
Java Main class
wrapper.java.mainclass=org.tanukisoftware.wrapper.WrapperSimpleApp
Java Classpath (include wrapper.jar) Add class path elements as
needed starting from 1
wrapper.native_library=ServiceWrapper32
wrapper.java.classpath.1=./lib/ServiceWrapper32.jar
wrapper.java.classpath.2=./launcher.jar
#wrapper.java.classpath.3=
Java Library Path (location of Wrapper.DLL or libwrapper.so)
wrapper.java.library.path.1=./lib
Java Additional Parameters
Note: On 64-bit Windows only, the first additional parameter must be: -Xrs
#wrapper.java.additional.1=
wrapper.java.additional.1=-Xrs
wrapper.java.additional.2=-Djava.awt.headless=false
Initial Java Heap Size (in MB)
wrapper.java.initmemory=512
Maximum Java Heap Size (in MB)
wrapper.java.maxmemory=1024
Application parameters. Add parameters as needed starting from 1
wrapper.app.parameter.1=org.eclipse.core.launcher.Main
wrapper.app.parameter.2=-consolelog
wrapper.app.parameter.3=-noExit
wrapper.app.parameter.4=-product
wrapper.app.parameter.5=com.wily.introscope.em.product
wrapper.app.parameter.6=-install
wrapper.app.parameter.7=./product/enterprisemanager
wrapper.app.parameter.8=-configuration
wrapper.app.parameter.9=./product/enterprisemanager/configuration
Number of seconds to allow between the time that the Wrapper launches
the JVM process and the time that the JVM side of the Wrapper responds
that the application has started. 0 means never time out. Defaults to 30 seconds.
wrapper.startup.timeout=300
Please help -
Wily Introscope Installation Issue
I've been trying to install the Wily Introscope Enterprise Manager onto my Solution Manager server for several days now but I'm running into a lot of issues. I have unpacked SAPISEM8SP01_00-10007429.SAR & SAPISEM80_03-10007433.SAR but the silent installation is not providing any errors or information on the installation. I've tried just about everything to get introscope8.0.2.0windowsAMD64SAP.exe to run on my server but it still does nothing. Has anyone run into this issue?
was able to finally get the installer to work by using package
SAPISEM8SP01_00-10007433.SAR. Not sure why the others were not working
but the agent works fine now. -
Wily Introscope Enterprise Manager Can't be accessed
Hi Experts,
I installed Solution Manager 7.0 EHP1 and executed basic configuration. And I followed the instruction to install wily EM 8.0. But after installation, the web pages http://emhost:8081/workstation and http://emhost:8081/webview cannot be accessed. Error msg is "404 Not Found The requested resource does not exist."
I've checked the wily log and found no errors. How to solve the problem?Hi ,
Check if the installation of EM 8.0 was successful or not.
For the same, please check <Introscopehome>/install/Introscopeinstall.log.
I am hoping your installation is successful. Then please perform some other checks.
Please start your Introscope Enterprise Manager service from Windows Services [ for other OS please refer to guide]
Check the <IntroscopeHome>/log/IntroscopeEnterpriseManager.log
file for an Error entry.. there may be a possibility that the Port 8081 [or 8080] is already in use.
Similar format to error message :::
"EM Web Server did not start. Port already in use: 8080 To change the Web Server port, modify the EM property: introscope.enterprisemanager.webserver.port "
If yes, then please modify the \conf\EnterpriseManager.properties file
introscope.enterprisemanager.webserver.port=8080
OR
introscope.enterprisemanager.webserver.port=any other open port
For more details about changing port please refer to Thread
Wily Introscope Enterprise Manager 7.2 is not starting on SolMan system
I hope the provided information will be helpful.
Best Regards,
~~ Pradeep Bishnoi ~~ -
Wily Introscope does not start
Hi there,
I've installed the Wily Introscope Enterprise Manager and when i try to start, the error below happens:
java.lang.RuntimeException: Application "com.wily.introscope.em.application" could not be found in the registry. The applications available are: org.eclipse.e
quinox.app.error.
at org.eclipse.equinox.internal.app.EclipseAppContainer.startDefaultApp(EclipseAppContainer.java:236)
at org.eclipse.equinox.internal.app.EclipseAppContainer.start(EclipseAppContainer.java:92)
at org.eclipse.equinox.internal.app.Activator.addingService(Activator.java:129)
at org.osgi.util.tracker.ServiceTracker$Tracked.trackAdding(ServiceTracker.java:1064)
at org.osgi.util.tracker.ServiceTracker$Tracked.track(ServiceTracker.java:1042)
at org.osgi.util.tracker.ServiceTracker$Tracked.serviceChanged(ServiceTracker.java:967)
at org.eclipse.osgi.framework.internal.core.FilteredServiceListener.serviceChanged(FilteredServiceListener.java:94)
at org.eclipse.osgi.framework.internal.core.BundleContextImpl.dispatchEvent(BundleContextImpl.java:1224)
at org.eclipse.osgi.framework.eventmgr.EventManager.dispatchEvent(EventManager.java:195)
at org.eclipse.osgi.framework.eventmgr.ListenerQueue.dispatchEventSynchronous(ListenerQueue.java:141)
at org.eclipse.osgi.framework.internal.core.Framework.publishServiceEventPrivileged(Framework.java:1603)
at org.eclipse.osgi.framework.internal.core.Framework.publishServiceEvent(Framework.java:1578)
at org.eclipse.osgi.framework.internal.core.ServiceRegistrationImpl.<init>(ServiceRegistrationImpl.java:103)
at org.eclipse.osgi.framework.internal.core.BundleContextImpl.createServiceRegistration(BundleContextImpl.java:657)
at org.eclipse.osgi.framework.internal.core.BundleContextImpl.registerService(BundleContextImpl.java:609)
at org.eclipse.osgi.framework.internal.core.BundleContextImpl.registerService(BundleContextImpl.java:675)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:359)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:176)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
at java.lang.reflect.Method.invoke(Method.java:391)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:504)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:443)
at org.eclipse.equinox.launcher.Main.run(Main.java:1169)
at org.eclipse.equinox.launcher.Main.main(Main.java:1144)
at org.eclipse.core.launcher.Main.main(Main.java:30)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
at java.lang.reflect.Method.invoke(Method.java:391)
at com.zerog.lax.LAX.launch(DashoA8113)
at com.zerog.lax.LAX.main(DashoA8113)
Anybody has already seen it?
Thanks in advance,
Dany AndersonHi
I have nearly the same error. May you share your solution?
Thanks in advance!
BR, Manuel -
Hi All,
We are unable to start Wily Introscope manager.Once start generating Java heap dump and went to down status.Please find the Log file details below and give your suggestion to resolve this issue.
Module=/usr/sap//wilyintroscope/jre/bin/libj9jit23.so
Module_base_address=0900000004620000
Target=2_30_20071004_14218_BHdSMr (AIX 6.1)
CPU=ppc64 (16 logical CPUs) (0x980000000 RAM)
JVMDUMP006I Processing Dump Event "gpf", detail "" - Please Wait.
JVMDUMP007I JVM Requesting System Dump using '/usr/sap/<SID>/wilyintroscope/core.20140724.183547.26476614.dmp'
JVMDUMP010I System Dump written to /usr/sap/<SID>/wilyintroscope/core.20140724.183547.26476614.dmp
JVMDUMP007I JVM Requesting Snap Dump using '/usr/sap/<SID>/wilyintroscope/Snap0002.20140724.183547.26476614.trc'
JVMDUMP010I Snap Dump written to /usr/sap/<SID>/wilyintroscope/Snap0002.20140724.183547.26476614.trc
JVMDUMP007I JVM Requesting Java Dump using '/usr/sap/<SID>/wilyintroscope/javacore.20140724.183547.26476614.txt'
JVMDUMP012E Error in Java Dump: /usr/sap/<SID>/wilyintroscope/javacore.20140724.183547.26476614.txt
JVMDUMP013I Processed Dump Event "gpf", detail "".
JVMJ9GC028E Option too large: '-Xmx4096m'
JVMJ9VM015W Initialization error for library j9gc23(2): Failed to initialize; unable to parse command line
Could not create the Java virtual machine.
Regards,
MKHi,
Plz find the java core details below.
NULL ------------------------------------------------------------------------
0SECTION TITLE subcomponent dump routine
NULL ===============================
1TISIGINFO Dump Event "gpf" (00002000) received
1TIDATETIME Date: 2014/07/24 at 18:36:07
1TIFILENAME Javacore filename: /usr/sap/<SID>/wilyintroscope/javacore.20140724.183547.26476614.txt
NULL ------------------------------------------------------------------------
0SECTION GPINFO subcomponent dump routine
NULL ================================
2XHOSLEVEL OS Level : AIX 6.1
2XHCPUS Processors -
3XHCPUARCH Architecture : ppc64
3XHNUMCPUS How Many : 16
NULL
1XHEXCPCODE J9Generic_Signal_Number: 0000000000000004
1XHEXCPCODE Signal_Number: 000000000000000B
1XHEXCPCODE Error_Value: 0000000000000000
1XHEXCPCODE Signal_Code: 0000000000000033
1XHEXCPCODE Handler1: 09001000A0C39D58
1XHEXCPCODE Handler2: 09001000A0C31E38
NULL
1XHEXCPMODULE Module: /usr/sap/<SID>/wilyintroscope/jre/bin/libj9jit23.so
1XHEXCPMODULE Module_base_address: 0900000004620000
NULL
1XHREGISTERS Registers:
2XHREGISTER R0:0000000000000002
2XHREGISTER R1:0FFFFFFFFFFFE150
2XHREGISTER R2:0000000000000002
2XHREGISTER R3:0000000000000002
2XHREGISTER R4:0000000000000002
2XHREGISTER R5:07000000002982C8
2XHREGISTER R6:0000000115E80F09
2XHREGISTER R7:0000000000000018
2XHREGISTER R8:0000000115F565B0
2XHREGISTER R9:0000000115D1B089
2XHREGISTER R10:FFFFFFFFFFFFFFFF
2XHREGISTER R11:0900000004654EB0
2XHREGISTER R12:000000011A1B7E9F
2XHREGISTER R13:0000000110011200
0SECTION ENVINFO subcomponent dump routine
NULL =================================
1CIJAVAVERSION J2RE 5.0 IBM J9 2.3 AIX ppc64-64 build j9vmap6423-20071007
1CIVMVERSION VM build 20071004_14218_BHdSMr
1CIJITVERSION JIT enabled - 20070820_1846ifx1_r8
1CIRUNNINGAS Running as a standalone JVM
1CICMDLINE ./jre/bin/java -Xms512m -Xmx4096m -Djava.awt.headless=true -Dsun.java2d.noddraw=true -Dorg.osgi.framework.bootdelegation=org.apache.xpath com.zerog.lax.L
AX /usr/sap/<SID>/wilyintroscope/bin/../Introscope_Enterprise_Manager.lax /tmp/env.properties.26476614
1CIJAVAHOMEDIR Java Home Dir: /usr/sap/<SID>/wilyintroscope/jre
1CIJAVADLLDIR Java DLL Dir: /usr/sap/<SID>/wilyintroscope/jre/bin
1CISYSCP Sys Classpath: /usr/sap/<SID>/wilyintroscope/jre/lib/vm.jar;/usr/sap/<SID>/wilyintroscope/jre/lib/core.jar;/usr/sap/<SID>/wilyintroscope/jre/lib/charsets.jar
;/usr/sap/<SID>/wilyintroscope/jre/lib/graphics.jar;/usr/sap/<SID>/wilyintroscope/jre/lib/security.jar;/usr/sap/<SID>/wilyintroscope/jre/lib/ibmpkcs.jar;/usr/sap/<SID>/wilyintr
oscope/jre/lib/ibmorb.jar;/usr/sap/<SID>/wilyintroscope/jre/lib/ibmcfw.jar;/usr/sap/<SID>/wilyintroscope/jre/lib/ibmorbapi.jar;/usr/sap/<SID>/wilyintroscope/jre/lib/ibmjcefw.
jar;/usr/sap/<SID>/wilyintroscope/jre/lib/ibmjgssprovider.jar;/usr/sap/<SID>/wilyintroscope/jre/lib/ibmjsseprovider2.jar;/usr/sap/<SID>/wilyintroscope/jre/lib/ibmjaaslm.jar;/
usr/sap/<SID>/wilyintroscope/jre/lib/ibmcertpathprovider.jar;/usr/sap/<SID>/wilyintroscope/jre/lib/server.jar;/usr/sap/<SID>/wilyintroscope/jre/lib/xml.jar;
1CIUSERARGS UserArgs:
2CIUSERARG -Xmx256M
2CIUSERARG -Xj9
2CIUSERARG -Xjcl:jclscar_23
2CIUSERARG -Dcom.ibm.oti.vm.bootstrap.library.path=/usr/sap/<SID>/wilyintroscope/jre/bin
2CIUSERARG -Dsun.boot.library.path=/usr/sap/<SID>/wilyintroscope/jre/bin
2CIUSERARG -Djava.library.path=/usr/sap/<SID>/wilyintroscope/jre/bin:/usr/sap/<SID>/wilyintroscope/jre/bin:/usr/sap/<SID>/wilyintroscope/jre/bin/classic:/usr/sa
p/<SID>/wilyintroscope/jre/bin:/usr/sap/<SID>/SYS/exe/run:/usr/sap/<SID>/wilyintroscope/jre/bin/j9vm:/usr/lib
2CIUSERARG -Djava.home=/usr/sap/<SID>/wilyintroscope/jre
2CIUSERARG -Djava.ext.dirs=/usr/sap/<SID>/wilyintroscope/jre/lib/ext
2CIUSERARG -Duser.dir=/usr/sap/<SID>/wilyintroscope
2CIUSERARG _j2se_j9=70912 0x09001000A048F3E8
2CIUSERARG vfprintf 0x0000000110001910
2CIUSERARG -Xms512m
2CIUSERARG -Xmx4096m
2CIUSERARG -Djava.awt.headless=true
2CIUSERARG -Dsun.java2d.noddraw=true
2CIUSERARG -Dorg.osgi.framework.bootdelegation=org.apache.xpath
2CIUSERARG -Dinvokedviajava
2CIUSERARG -Djava.class.path=/usr/sap/<SID>/wilyintroscope/bin/../launcher.jar:/usr/sap/<SID>/wilyintroscope/bin/../lax.jar:
2CIUSERARG vfprintf
2CIUSERARG _port_library 0x09001000A048FDF0
2CIUSERARG -Xdump
Regards,
MK -
Wily Introscope as monitoring tool?
Hello everybody,
we are looking for a tool capable of monitoring Systems with usage type "java", e.g. Enterprise Portal oder Process Integration.
Has anybody experience with Wily Introscope, e.g. concerning usability?
Whatever experience
Thanks a lot
ThorbenYes Wily is a very usable monitoring and diagnostic toolset for the J2EE platform. This is especially true for the NetWeaver Portal. SAP has gone to great lengths to instrument the Portal Stack and provides thousands of metrics on a typical Portal and there are tools to Monitor, Analyze, Trace, Track Errors all as part of the Read-only version delivered by SAP.
The pre-configured dashboards are quite nice. The newer release allows use of the Introscope Workstation Version 7.1 product which is more feature rich than the WebView user tool, and this is a plus.
If you want to integrate to an automated Alerting System you'll have to buy the Solution Enablement Pack. You can read more about this at service.sap.com/diagnostics.
Frank -
Wily Introscope 8.2.2.0
Hallo,
I´m installing Wily Introscope 8.2.2.0 on Solution Manager 7.0 EHP1. I proceed according to
installation guide. Problem appears, when I want to launch Enterprise Manager as Windows Service.
In EMService.log I found this:
ERROR | wrapper | 2010/05/18 10:23:39 | License Error:
ERROR | wrapper | 2010/05/18 10:23:39 | A valid license was not found in the Wrapper configuration file.
ERROR | wrapper | 2010/05/18 10:23:39 |
ERROR | wrapper | 2010/05/18 10:23:39 | A license can be obtained from the Java Service Wrapper site:
ERROR | wrapper | 2010/05/18 10:23:39 | http://wrapper.tanukisoftware.org/doc/english/purchase.html
ERROR | wrapper | 2010/05/18 10:23:39 |
ERROR | wrapper | 2010/05/18 10:23:39 | Licenses can be generated for any of the following Host Ids.
ERROR | wrapper | 2010/05/18 10:23:39 | The first Host Id is recommended.
I looked on this pages and license for Java Service Wrapper is only for purchase.
I thought that Wily is licensed by SAP or do I concern myself?
Thanks for help.
J.M.DI used the latest version I found:
SAPISEM02_0-10007433.SAR - introscope8.2.2.0windowsAMD64SAP.exe
osgiPackages.v1.2.windows.zip
SAPISMM8SP01_00-10007429.SAR - SAP Management Modules
I have one NonFatalErrors. I found that i can ignore it.
Summary
Installation: Successfulwith errors.
395 Successes
0 Warnings
1 NonFatalErrors
0 FatalErrors
Execute ANT Script: Script:
Status: ERROR
Additional Notes: ERROR - D:\usr\sap\ccms\wilyintroscope\install\em.installer.exec.ant15.xml:451: exec returned: 1 -
Wily introscope 8.2.2 service not starting
Hi All,
I have recently installed wily introscope on our new solution manager server, other than a few issues with modules the manager starts up without problems from a command line.
When I try to start the manager as a service the wrapper application performs this error.
STATUS | wrapper | 2010/07/14 17:35:37 | --> Wrapper Started as Service
STATUS | wrapper | 2010/07/14 17:35:37 | Java Service Wrapper Standard Edition 32-bit 3.3.6
STATUS | wrapper | 2010/07/14 17:35:37 | Copyright (C) 1999-2009 Tanuki Software, Ltd. All Rights Reserved.
STATUS | wrapper | 2010/07/14 17:35:37 | http://wrapper.tanukisoftware.org
STATUS | wrapper | 2010/07/14 17:35:37 | Licensed to CA Wily Technology for Introscope Enterprise Manager
STATUS | wrapper | 2010/07/14 17:35:37 |
STATUS | wrapper | 2010/07/14 17:35:37 | Launching a JVM...
INFO | jvm 1 | 2010/07/14 17:35:37 | java.lang.NoClassDefFoundError: org/tanukisoftware/wrapper/WrapperSimpleApp
INFO | jvm 1 | 2010/07/14 17:35:37 | Exception in thread "main"
ERROR | wrapper | 2010/07/14 17:35:37 | JVM exited while loading the application.
STATUS | wrapper | 2010/07/14 17:35:42 | Launching a JVM...
INFO | jvm 2 | 2010/07/14 17:35:42 | java.lang.NoClassDefFoundError: org/tanukisoftware/wrapper/WrapperSimpleApp
INFO | jvm 2 | 2010/07/14 17:35:42 | Exception in thread "main"
ERROR | wrapper | 2010/07/14 17:35:42 | JVM exited while loading the application.
STATUS | wrapper | 2010/07/14 17:35:46 | Launching a JVM...
INFO | jvm 3 | 2010/07/14 17:35:46 | java.lang.NoClassDefFoundError: org/tanukisoftware/wrapper/WrapperSimpleApp
INFO | jvm 3 | 2010/07/14 17:35:46 | Exception in thread "main"
ERROR | wrapper | 2010/07/14 17:35:46 | JVM exited while loading the application.
STATUS | wrapper | 2010/07/14 17:35:51 | Launching a JVM...
INFO | jvm 4 | 2010/07/14 17:35:51 | java.lang.NoClassDefFoundError: org/tanukisoftware/wrapper/WrapperSimpleApp
INFO | jvm 4 | 2010/07/14 17:35:51 | Exception in thread "main"
ERROR | wrapper | 2010/07/14 17:35:51 | JVM exited while loading the application.
STATUS | wrapper | 2010/07/14 17:35:56 | Launching a JVM...
INFO | jvm 5 | 2010/07/14 17:35:56 | java.lang.NoClassDefFoundError: org/tanukisoftware/wrapper/WrapperSimpleApp
INFO | jvm 5 | 2010/07/14 17:35:56 | Exception in thread "main"
ERROR | wrapper | 2010/07/14 17:35:56 | JVM exited while loading the application.
FATAL | wrapper | 2010/07/14 17:35:56 | There were 5 failed launches in a row, each lasting less than 300 seconds. Giving up.
FATAL | wrapper | 2010/07/14 17:35:56 | There may be a configuration problem: please check the logs.
STATUS | wrapper | 2010/07/14 17:35:56 | <-- Wrapper Stopped
STATUS | wrapper | 2010/07/15 09:47:08 | --> Wrapper Started as Service
Unless I am missing something (most probable), it looks like the Java Main class wrapper.java.mainclass=org.tanukisoftware.wrapper.WrapperSimpleApp is looking for java.lang.NoClassDefFoundError
Not being a java person language issue?
Anyway has anyone had this issue or resolved it?
Running windows 2008 R1 enterprise, oracle DB, solution manager EHP1
Many thanksHi Guilherme
Just for yours or anyone running this under windows 2008, you were correct with note 1273028.
If the windows service still fails to start please check if files ServiceWrapper.jar and ServiceWrapper.dll are present in folder lib. If not download them from attachment of this note: ServiceWrapper_822.zip for release 8.2.2.0, ServiceWrapperWindowsAMD64SAP.zip for previous 8.x releases.
The service should start although giving an error message regarding the ServiceWrapper.dll. You can ignore this error.
I noted that the installer did not install ServiceWrapper.jar and ServiceWrapper.dll, I down loaded both attachments, however ServiceWrapper_822.zip only seemed to work.
Thanks for your help
Mike
Maybe you are looking for
-
My company doesn't support macs, but the mobile mail works great on my iPhone/iPad. The settings provided by my company enables syncing on my calendar, I can accept appointments, and my mail syncs perfectly and always faster than my DELL laptop wire
-
Hp Officejet Pro 8500A Plus - eprint not working
any eprint type request fails despite the hpeprintcenter page showing everything is correct. ie printer is 'connected' and 'ready': 1. email name & information page doesn't print (even though the email name is displayed OK on the display screen). Pre
-
BEAN : Bean included in JSP Page
Hi , I had developed a web-application in that I had included a bean in a JSP code by using the following <jsp:useBean id="testbean" scope="session" class="path.test" /> now the problem is some times when we click on that particular JSP page where th
-
How setup LDAP Sync After Install in OIM 11g ver, 11.1.1.5.0
Hi guys, I'm trying to find how to setup LDAP Sync After Install in OIM 11g (ver, 11.1.1.5).... I found on Metalink an interesting article "*How to Setup LDAP Sync After Install in OIM 11g [ID 1272682.1]*", but inside there is a Note that says: Note:
-
Hi I was wondering how one can create cusomized tasks through wlpi. Basically, We have some additional data related to a task which wlpi TaskInfo does not? I was wondering if there is a way to create subclass of TaskInfo and ask wlpi to instantiate t