Windows 10 Upgrade fails

My laptop goes nearly all the way through the upgrade proceedure and then reverts to a black screen where it stays. After I power it of and restart it reverts to Windows 7 and I get the following error code: We couldn't install Windows 10 OxC1900101 - 0x400107The installation failed in the SECOND_BOOT phase with an error during boot operation Can anyone let me know what the problem is? Thanks

Similar Messages

On Windows 7 PC, got the "upgrade iTunes" notice, said sure, but the upgrade failed, now I can't access iTunes "invalid permissions"

On Windows 7 PC, got the "upgrade iTunes" notice this morning, said sure, but the upgrade failed, now I can't access iTunes "invalid permissions"
I wasn't paying attention so I don't know the precise error I got on the upgrade failure.
All other iTunes upgrades have been fine...no brainers. Done several on this W7 PC.
If I re-download and install a fresh iTunes I assume I will lose my library...true? Can I find and save off my library so I don't have to "discover" all my music which is scattered all over the PC and a 1T attached USB drive.
Or is there some way to get the iTunes upgrade to successfully restart and install correctly?
Help!

Hello there, Konami84.
The following Knowledge Base article provides some recomendations for troubleshooting:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

IPAM Upgrade Failed - Windows Server 2012 R2

Why previous discussion was locked?
http://social.technet.microsoft.com/Forums/windowsserver/en-US/324f812f-80b5-4822-aadc-cf92d9f11949/ipam-upgrade-failed-windows-server-2012-r2?forum=windowsserverpreview
IPAM Upgrade Failed - Windows Server 2012 R2
Hi All,
I'm experiencing some problems with the upgrade procedure of an IPAM service hosted on a Windows Server 2012 R2 instance which originally was deployed on a non-R2 version. I've recently done in-place upgrade of the W2K12 OS to W2K12R2 which went absolutely
fine, however when I'm trying to upgrade the IPAM service itself (from v6.2.0.1 to v6.3.0.1), I'm receiving an error message right after the database schema update procedure.
Received error message:
Failed to convert Schema. Please see the details.
The given key was not present in the dictionary.
Please restart the Wizard to update the IPAM server.
Tried to restart the wizard several times, but it ends up with the same result.
Also I noticed that the event log shows some authentication problems with the WID DB service:
Connecting to IPAM database failed with,
    Number: 18456
    ErrorCode: -2146232060
    Level: 14
    State: 1
    Message: Login failed for user 'NT AUTHORITY\NETWORK SERVICE'.
For database,
    Database Type: WindowsInternalDatabase
    Database Authentication Type: WindowsAuthentication
    Database Name: IPAM
    Database Path: C:\Windows\System32\ipam\Database
    Database Server:
    Database Server Port: 0
    Username:
The original IPAM deployment was pretty much a standard one by the official MS guides so there were no custom actions applied at any point in time. Right now I can access neither the IPAM features nor the previously made inventory, because server manager wouldn't
let me do so until the upgrade is complete. For the time being this upgrade failure seems to be a bug.
Kindly ask you to help me out with this issue.
Thanks in advance.

Hi, event id 60002 in admin log:
Connecting to IPAM database failed with,
Number: 18456
ErrorCode: -2146232060
Level: 14
State: 1
Message: Login failed for user 'NT AUTHORITY\NETWORK SERVICE'.
For database,
Database Type: WindowsInternalDatabase
Database Authentication Type: WindowsAuthentication
Database Name: IPAM
Database Path: C:\Windows\System32\ipam\Database
Database Server:
Database Server Port: 0
Username:
and event id 10459:
The IPAM database schema conversion from version 6.2.0.1 to version 6.3.0.1 failed with error: The given key was not present in the dictionary.. Your IPAM installation might not work properly.
10x

Windows 10 upgrade fail - black screen

Hi - installed windows 10 via upgrade - failed part way through with the error message "something happened". Downloaded the install ISO for usb drive - did a clean install from that (including format HD) - win10 installed ok, then 10 min later screen went black. I left the pc for several hours - nothing happened so I did a hard reset. Now when I turn on it powers up, passes bios message, then hangs on black screen. If I hard reset again the windows diagnostic runs but finds no solution - I can boot in to Safe Mode but when restarting again goes back to black screen. I've tried plugging in an external monitor to the hdmi -no luck. Have tried clean reinstall several times- no luck. Any suggestions?

If I don't install the graphics drivers, Windows Update automatically downloads and installs drivers which then cause the black screen. The only solution I have so far is to set my wifi connection as "metered" so it doesn't download and install updates automatically. I can install other updates and drivers manually, but this isn't ideal.

Upgrade fails in the phase STARTSAP_TBUPG during the upgrade of CRM 4 to 5

Hello,
Upgrade failed with the below message in the upgrade phase STARTSAP_TBUPG during the upgrade of CRM 4.0 to CRM 5.0
Error Message:
SYSTEM START failed, code -1
             -1: 'startsap.exe' returned an error
             See file 'D:\usr\sap\put\log\R3up.ECO' for details.
R3up.ECO:
SAPup> Starting subprocess startsap.exe with id 5844 at 20080402142258
EXECUTING D:\usr\sap\put\exe\startsap.exe name=SID nr=00 SAPDIAHOST=Hostname
Environment: dbms_type=mss
Environment: dbs_mss_schema=cdu
STARTSAP failed
Details are written to D:\usr\sap\put\tmp\startSID.log
Process with ID 6276 terminated with status -1
startSID.log
running D:\usr\sap\put\exe\sapstart.exe name=SID nr=00 SAPDIAHOST=Hostname -wait
SAPSTART finished successfully on Host_SID_00, but at least one process doesn't run correctly:
     msg_server.exe, MessageServer, Running, 2008 04 02 14:22:58, 0:03:19
     disp+work.exe, Dispatcher, Running, Message Server connection ok, Dialog Queue time: 0.00 sec, 2008 04 02 14:22:58, 0:03:19
     igswd.exe, IGS Watchdog, Stopped, 2008 04 02 14:22:58, 0:00:00
D:\usr\sap\put\exe\sapstart.exe=>sapparam(1c): No Profile used.
It is trying to start the shadow instance and failing by ending all the work process
DEV_DISP:
trc file: "dev_disp", trc level: 1, release: "700"
sysno      01
sid        SID
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    150
intno      20050900
make:      multithreaded, ASCII, optimized
pid        5348
Wed Apr 02 17:22:10 2008
kernel runs with dp version 234(ext=109) (@(#) DPLIB-INT-VERSION-234)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 5348) [dpxxdisp.c   1245]
     shared lib "dw_xml.dll" version 150 successfully loaded
     shared lib "dw_xtc.dll" version 150 successfully loaded
     shared lib "dw_stl.dll" version 150 successfully loaded
     shared lib "dw_gui.dll" version 150 successfully loaded
     shared lib "dw_mdm.dll" version 150 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
Wed Apr 02 17:22:22 2008
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0100.qqq.nxst) took 12 seconds
Wed Apr 02 17:22:40 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 18 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5373]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >HOSTNAME_SID_01                      <
DpShMCreate: sizeof(wp_adm)          22968     (1044)
DpShMCreate: sizeof(tm_adm)          3642120     (18120)
DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm)          528048     (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1296)
DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 05560040, size: 4281040)
DpShMCreate: allocated sys_adm at 05560040
DpShMCreate: allocated wp_adm at 05561B30
DpShMCreate: allocated tm_adm_list at 055674E8
DpShMCreate: allocated tm_adm at 05567518
DpShMCreate: allocated wp_ca_adm at 058E0820
DpShMCreate: allocated appc_ca_adm at 058E4E70
DpShMCreate: allocated comm_adm at 058E65E0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05967490
DpShMCreate: allocated gw_adm at 059674D0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05967500
DpShMCreate: allocated wall_adm at 05967508
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 2039 blocks reserved for free list.
ES initialized.
WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c   12553]
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( HOSTNAME) [dpxxdisp.c   11867]
DpStartStopMsg: send start message (myname is >HOSTNAME_SID_01                      <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 150
Release check o.K.
Wed Apr 02 17:23:20 2008
my types changed after wp death/restart 0x1f --> 0x1e
my types changed after wp death/restart 0x1e --> 0x1c
my types changed after wp death/restart 0x1c --> 0x18
my types changed after wp death/restart 0x18 --> 0x10
my types changed after wp death/restart 0x10 --> 0x0
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1477
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 02 17:23:30 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long)               Wed Apr 02 11:53:30 2008
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program          Cl User         Action                    Table
0 DIA     6916 Ended         no      1   0        0
1 DIA     7724 Ended         no      1   0        0
2 DIA     6044 Ended         no      1   0        0
3 DIA     4300 Ended         no      1   0        0
4 DIA     6992 Ended         no      1   0        0
5 DIA     2412 Ended         no      1   0        0
6 DIA      432 Ended         no      1   0        0
7 DIA     8168 Ended         no      1   0        0
8 DIA     5420 Ended         no      1   0        0
9 DIA     9712 Ended         no      1   0        0
10 UPD     4320 Ended         no      1   0        0
11 ENQ     3476 Ended         no      1   0        0
12 BTC     2676 Ended         no      1   0        0
13 BTC     6816 Ended         no      1   0        0
14 BTC     9636 Ended         no      1   0        0
15 BTC     8356 Ended         no      1   0        0
16 BTC     7004 Ended         no      1   0        0
17 BTC     7284 Ended         no      1   0        0
18 BTC    10048 Ended         no      1   0        0
19 BTC     4560 Ended         no      1   0        0
20 BTC     4196 Ended         no      1   0        0
21 SPO     4268 Ended         no      1   0        0
Dispatcher Queue Statistics               Wed Apr 02 11:53:30 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
1
2000
1
1
--------++++--
+
DIA
3
3
2000
3
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id          7
wake_evt_udp_now     0
wake events           total     3, udp     3 (100%), shm     0 ( 0%)
since last update     total     3, udp     3 (100%), shm     0 ( 0%)
Dump of tm_adm structure:               Wed Apr 02 11:53:30 2008
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
Workprocess Comm. Area Blocks               Wed Apr 02 11:53:30 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1477
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 02 17:23:35 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >HOSTNAME_SID_01                      < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1860) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1860 HANDLE:1448)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1477
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 02 17:23:36 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1860 HANDLE:1448)
DpStartStopMsg: send stop message (myname is >HOSTNAME_SID_01                      <)
NiIMyHostName: hostname = 'HOSTNAME'
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name                    -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name           MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Wed Apr 02 17:23:37 2008
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12213]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1356 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1356 (pos=2)
SiSelNRemove: removed sock 1356
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/22
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 9)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1356
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 5348) [dpxxdisp.c   10461]
Good Bye .....
Please help me in resolving this issue
Thanks,
Vadi

Hi Suhas,
Have checked the hostname and it is correct.
I am getting the below output When i run r3trans -x
This is r3trans version 6.14 (release 700 - 04.03.08 - 16:43:00).
r3trans finished (0000).
I could see the below error message in dev_W21
ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'sid_shd' setuser 'sid_shd']
C sloledb.cpp [ExecuteAndFlush,line 6470]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'cdu_shd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'cdu_shd' failed -- connect terminated
C failed to establish conn. 0
Thanks,
Vadi

SCSM 2010 to 2012 Management server upgrade failed

I upgrading my scsm 2010 to 2012 both Management and DW server.
So i have set up the secondary lab environment and do this.
The DW server has been upgraded successfully to 2012.
When i try to upgrade SCSM Management server, at the finalizing stage, i get this error as _RegisterExtensionsDeferred
Log as below.
2014-08-26T14:48:28.7717429+05:30   Always:   Trace Session Started
02:48:28:
02:48:28:Application Started
02:48:28:This is 64-bit application.
02:48:28:Product ID is NOT installed
02:48:28:Found ProductID:{A193A8C7-CBE7-4F3B-887F-6B03EE43A208}, ProductName:Microsoft System Center Service Manager SP1, Version:7.0.6555.128
02:48:28:Found SMServer components
02:48:28:Found SMConsole components
02:48:28:Setup is running from: c:\SCSM2012\amd64\Setup
02:48:28:Using local Analysis server as default instance
02:48:28:Using 'DWASDataBase' as default Analysis server database name
02:48:28:Using 'Default' as default Analysis server database file path
02:48:29:Current UI culture (en-US) is not supported. Trying Neutral culture.
02:48:29:Found c:\SCSM2012\amd64\Setup\en\SCSM_license.rtf.
02:48:29:Current UI culture (en-US) is not supported. Trying Neutral culture.
02:48:29:Found c:\SCSM2012\amd64\Setup\en\SCSM_EvalLicense.rtf.
02:48:29:Current UI culture (en-US) is not supported. Trying Neutral culture.
02:48:29:Found c:\SCSM2012\amd64\Setup\en\PrerequisiteInputFile.xml.
02:48:29:Found c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:48:29:All vital setup files found.
02:48:29:Upgrading Service Manager 7.0.6555 with 7.5.1561
02:48:29:Checking dependencies for Server upgrade...
02:48:40:Managment server is registered with Datawarehouse 'TESTSER'
02:48:42:Datawarehouse is up-to-date
02:48:42:Getting Management Group information from TESTSER:ServiceManagerNew
02:48:42:[GetManagementGroupPropertiesFromDB]: Opened the DB connection using Data Source=TESTSER;Initial Catalog=ServiceManagerNew;Integrated Security=True;Persist Security Info=False.
02:48:42:[GetManagementGroupPropertiesFromDB]: Found Management Group information.
02:48:42:[GetManagementGroupPropertiesFromDB]: Found Primary SDK server:..net.
02:48:42:Validating SmAdminRoleGroup
02:48:43:Checking MU OptIn state
02:48:43:MU is not opted in
02:48:43:Start adding DataItems
02:48:43:System Center Service Manager Install
02:48:44:Final Install Tasks
02:48:44:Done adding DataItems
02:48:46:Getting Domain List
02:49:35:LoadPrerequisites: Start adding ComponentTitles
02:49:35:LoadPrerequisites: Start adding DataItems
02:49:35:Memory check
02:49:36:Microsoft SQL Server 2008 Analysis Management Objects
02:49:36:Memory check
02:49:36:Processor speed check
02:49:36:Processor speed check
02:49:36:Processor speed check
02:49:36:IIS check
02:49:36:ASP.NET check
02:49:36:Basic Authentication check
02:49:36:Windows Authentication check
02:49:36:Microsoft .NET Framework 4 check
02:49:36:Windows Service Pack check
02:49:36:Microsoft Report Viewer Redistributable check
02:49:36:PowerShell 2.0 check
02:49:36:SharePoint Server 2010 check
02:49:36:SharePoint Farm Administrator check
02:49:36:SharePoint Server 2010 configuration check
02:49:36:ADO.NET Data Services Update check
02:49:36:Microsoft SQL Server 2008 Native Client check
02:49:36:Language Pack for SharePoint Server 2010 or SharePoint Foundation 2010 - English check
02:49:36:LoadPrerequisites: Done adding prerequisites checks
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Memory check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   MemoryCheck-8gbWarn: 0
02:49:36:
02:49:36:CheckPrerequisites:    Memory check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Microsoft SQL Server 2008 Analysis Management Objects prereq.
02:49:36:Entered RequiredAMO
02:49:36:Trying alternate method of detection using Assembly.Load
02:49:36:CheckPrerequisites:        Logic Type:and   AMO-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    Microsoft SQL Server 2008 Analysis Management Objects: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Processor speed check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   ProcessorSpeedCheck2.5MHz-Warn: 0
02:49:36:CheckPrerequisites:        Logic Type:and   ProcessorCoreCheck2Core-Warn: 0
02:49:36:
02:49:36:CheckPrerequisites:    Processor speed check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Windows Service Pack check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   Win2k8R2Sp1Check-Err: 0
02:49:36:CheckPrerequisites:
02:49:36:CheckPrerequisites:                ProductType was not a match. Looking for: LanmanNT Found: ServerNT
02:49:36:CheckPrerequisites:        Logic Type:or   Win2k8R2Sp1DCCheck-Err: 2
02:49:36:CheckPrerequisites:
02:49:36:CheckPrerequisites:                The value 6.1.7601.65536 was not within the range 6.2.0 to 9.9.9999.
02:49:36:CheckPrerequisites:        Logic Type:or   WinSrvrVNextCheck-Err: 2
02:49:36:CheckPrerequisites:
02:49:36:CheckPrerequisites:                ProductType was not a match. Looking for: LanmanNT Found: ServerNT
02:49:36:CheckPrerequisites:        Logic Type:or   WinSrvrVNextDCCheck-Err: 2
02:49:36:
02:49:36:CheckPrerequisites:    Windows Service Pack check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Microsoft Report Viewer Redistributable check prereq.
02:49:36:Entered RequiredReportViewer
02:49:36:CheckPrerequisites:        Logic Type:and   RptVwrCheck-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    Microsoft Report Viewer Redistributable check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking PowerShell 2.0 check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   PowerShell2Check-err: 0
02:49:36:CheckPrerequisites:        Logic Type:or   PowerShell2Check32-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    PowerShell 2.0 check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking ADO.NET Data Services Update check prereq.
02:49:36:Loading System.Data.Services.Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
02:49:36:Found version 3.5.30729.5420
02:49:36:CheckPrerequisites:        Logic Type:and   ADODotNetDataServicesHotfix-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    ADO.NET Data Services Update check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Microsoft SQL Server 2008 Native Client check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   SQLNCLI10-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    Microsoft SQL Server 2008 Native Client check: Passed
02:49:36:
02:49:36:**************************************************
02:49:37:CheckPrerequisites: Return Value 0
02:49:39:Doing Pre-Upgrade checks...
02:49:39:Validating database ServiceManagerNew on SQL Server TESTSER
02:49:39:Validating SQL Instance TESTSER
02:49:39:SQL Server: TESTSER
02:49:39:SQL Server version: 10.50.1600.1
02:49:39:Full text search installed: True
02:49:39:Checking if '\administrator' is Sysadmin Or (SecurityAdmin And DbCreator) on SQL Instance TESTSER
02:49:39:Stopping Service OMSDK on server
02:49:39:Starting Service OMSDK on server
02:49:41:Stopping Service OMCFG on server
02:49:44:Starting Service OMCFG on server
02:49:47:Validating Path C:\Program Files\Microsoft System Center\Service Manager 2010\
02:49:47:Checking for available free disck space
02:49:47:Checking directory write access
02:49:47:*** Pre-Upgrade checks passed ***
02:49:47:QuickFixEngineeringHandler: Unable to LoadQuickFixEngineeringFile.
02:49:47:SetProgressScreen: StartMinorStep.
02:49:47:statusUpdate: Resetting progress bar.
02:49:47:ProcessInstalls: Install Item System Center Service Manager Install has a Preprocessing delegate of SystemCenterServiceManagerPreinstallProcessor. Launching it now.
02:49:47:SetProgressScreen: Init MSI Install progress.
02:49:47:statusUpdate: Resetting progress bar.
02:49:47:LaunchMsi: Msi mutex is not in use.
02:49:47:LaunchMsi: MSI to launch is: c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:49:47:LaunchMsi: Turning off the internal UI for c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:49:47:LaunchMSI: Enable logging for the MSI at C:\Users\administrator.\AppData\Local\Temp\2\\SCSMInstall02.log.
02:49:47:LaunchMsi: MSI c:\SCSM2012\amd64\Setup\Server\SM.msi is not in silent mode. Setting the external UI.
02:49:47:LaunchMsi: Launching c:\SCSM2012\amd64\Setup\Server\SM.msi
02:49:52:statusUpdate: Resetting progress bar for MSI: MaxValue 58857
02:50:09:statusUpdate: Resetting progress bar for MSI: MaxValue 345710070
02:50:09:Install Progress - (ProcessComponents) Updating component registration
02:50:09:statusUpdate: Resetting progress bar for MSI: MaxValue 345710070
02:50:10:Install Progress - (StopServices) Stopping services
02:50:16:Install Progress - (_StopNamedServices_HealthService.80B659D9_F758_4E7D_B4FA_E53FC737DCC9) Stopping Health services
02:50:17:Install Progress - (RemoveODBC) Removing ODBC components
02:50:17:Install Progress - (RemoveFiles) Removing files
02:50:17:Install Progress - (CreateFolders) Creating folders
02:50:17:Install Progress - (InstallFiles) Copying new files
02:50:30:Install Progress - (_CreateDatabase) Creating Database
02:50:30:Install Progress - (_ExecuteSqlScripts) Configuring Database
02:52:07:Install Progress - (ExecuteSqlStrings) Executing SQL Strings
02:52:07:Install Progress - (CreateShortcuts) Creating shortcuts
02:52:07:Install Progress - (WriteRegistryValues) Writing system registry values
02:52:08:Install Progress - (_InstallServerPerfCounters.D2179E31_E456_401A_A820_CEBB135E3429) Installing Server Performance Counters
02:52:12:Install Progress - (WriteEnvironmentStrings) Updating environment strings
02:52:12:Install Progress - (_Rollback_UninstallBIDMOF.68918168_3885_4F75_BBF8_0CC84213F8D1) Rolling back BID MOF Installation
02:52:23:Install Progress - (GenerateScript) Generating script operations for action:
02:52:24:Install Progress - (_MPProcessorDeferred) Importing Management Packs
02:52:25:Install Progress - (_ExecuteSqlScripts) Configuring Database
02:52:26:Install Progress - (RegisterUser) Registering user
02:52:26:Install Progress - (RegisterProduct) Registering product
02:52:26:Install Progress - (PublishComponents) Publishing Qualified Components
02:52:26:Install Progress - (MsiPublishAssemblies) Publishing assembly information
02:52:26:Install Progress - (_ConfigureConfigService.D2179E31_E456_401A_A820_CEBB135E3429) Configure Config Service
02:52:26:Install Progress - (_CreateInstanceQualityRelationship) Creating Default Instances, Qualities And There Relationships
02:52:26:Install Progress - (PublishFeatures) Publishing product features
02:52:26:Install Progress - (_StartNamedServices_HealthService.80B659D9_F758_4E7D_B4FA_E53FC737DCC9) Restarting Health Service
02:52:26:Install Progress - (PublishProduct) Publishing product information
02:52:26:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:52:26:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:57:32:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:57:44:An error occurred while executing a custom action:_RegisterExtensionsDeferred
Upgrade failed after making permanent changes to this management server. A disaster recovery procedure will be necessary to rebuild this machine before attempting upgrade again. Consult the User Guide to determine which action to take next.
02:57:44:Install Progress - (Rollback) Rolling back action:
02:57:44:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:57:44:statusUpdate: Resetting progress bar for MSI: MaxValue 3
02:57:44:Install Progress - (Rollback) Rolling back action:
02:57:44:statusUpdate: Resetting progress bar for MSI: MaxValue 10525
02:58:43:MsiInstallProduct finished for msi c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:58:43:LaunchMSI: Setting rollback to true
02:58:43:LaunchMSI: MSI c:\SCSM2012\amd64\Setup\Server\SM.msi returned error 1603:Fatal error during installation
02:58:43:ProcessInstalls: Install Item System Center Service Manager Install failed to install. We did not launch the post process delegate.
02:58:43:SetProgressScreen: FinishMinorStep.
regards Sundaresan.C

Jeremiah,
We ran into this as well. One of two options:
1.) Just run a repair on the SQL Server installation
2.) Repair the WMI settings on the SQL Server as descibed here:
http://social.technet.microsoft.com/Forums/en-US/systemcenterservicemanager/thread/2a91d03e-a685-495e-89ac-a591ec5871f6/
bb

Repository upgrade fails 11.1.0.7 db -10.2.0.5 GC patchset

Installing GridControl 10.2.0.5 on Windows 2003 Server SP2. Initial install successful of 10.2.0.2 using existing database 11.1.0.7. The database was created new to use for GC. Patchset no problems until Configuration Assitant step "Repository Upgrade" failed with errors:
rem Copyright (c) 1999, 2009, Oracle. All rights reserved.
oracle.sysman.emcp.oms.RepositoryPatchUpgrade -verbose
oracle.sysman.emcp.oms.OmsPatchUpgrade -configureOms
oracle.sysman.emcp.aggregates.ConfigPlugIn
oracle.sysman.emcp.oms.StartOMS -configureOms
oracle.sysman.emcp.oms.EMCLISetup
oracle.sysman.ccr.configCCR.ConfigCCRPlugIn
oracle.sysman.ccr.configCCR.ConfigRepeaterPlugIn
Tried to find cause of errors and cannot seem to understand why this step failed.
Considering uninstalling GC and Oracle 11g and reinstalling GC with "new database" option.
Anyone successful at installing GC 10.2.0.5 with an 11g database?
Thank you,
Curt Swartzlander
DBA

pasinc wrote:
Can anyone help me figure out why the domU is just hanging/blocked?It's not hanging (blocked just means it doesn't need the CPU) -- it's just switched into a graphic mode that the console view can't display. You can either VNC into the guest, or change the kernel boot parameters by removing rhgb quiet and replacing them with console=xvc0 -- this should allow you to see the full boot process and answer the first-boot interview questions without using VNC.
You can get the VNC details by running: virsh dumpxml <domain ID> and you can get the domain ID from the xm list output.

SCOM 2012 R2 agent upgrade fails crippling agents

Running into a large amount of SCOM agents that are failing the upgrade from 2012 SP1 to R2 and would appreciate any feedback from my SCOM community colleagues. Warning this issue is not for the faint of heart.
Plan:
I am in the process of upgrading 1900 manually installed SCOM 2012 SP1 agents to R2. I am using SCCM to deliver the upgrade using the standard sanctioned upgrade parameters.
Momagent.msi /qn /l*v %SystemDrive%\SCOM2012AgentUpgrade.log AcceptEndUserLicenseAgreement=1
Problem:
I have run into a problem where on a larger group of systems, 165 servers, where the upgrade fails and leaves the agent in a crippled state. At this point the agent cannot be removed cleanly via add remove, nor can a straight install of the agent
be done. What is required is a manual removal of registry keys and then a clean install of the agent can be performed to remediate. This is no problem and I am able to do this. (Note: all other methods of agent removal did not work ie:
Cleanmom.exe utility or add remove)
Task:
Seeing that we need to do agent upgrades in the future it would be great to know why this happened so we can plan for this in the future.
Notes:
Seems like a random sample of servers (2003/2008) with different applications running on them so that doesn't help in narrowing things down.
Looking at the MSI log, I see a common issue among systems that had this problem.
******* Product: {387306D9-78CE-4E0E-B952-28A50CC8B3EE}
           ******* Action:
           ******* CommandLine: **********
MSI (s) (7C:7C) [08:08:43:668]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (7C:7C) [08:08:43:668]: User policy value 'DisableMedia' is 0
MSI (s) (7C:7C) [08:08:43:668]: Machine policy value 'AllowLockdownMedia' is 0
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Media enabled only if package is safe.
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Looking for sourcelist for product {387306D9-78CE-4E0E-B952-28A50CC8B3EE}
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Adding {387306D9-78CE-4E0E-B952-28A50CC8B3EE}; to potential sourcelist list (pcode;disk;relpath).
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Now checking product {387306D9-78CE-4E0E-B952-28A50CC8B3EE}
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Media is enabled for product.
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Attempting to use LastUsedSource from source list.
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Trying source C:\WINDOWS\SysWOW64\CCM\Cache\LFG00446.1.System\i386\.
MSI (s) (7C:7C) [08:08:43:668]: Note: 1: 2203 2: C:\WINDOWS\SysWOW64\CCM\Cache\LFG00446.1.System\i386\MOMAgent.msi 3: -2147287037
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Source is invalid due to missing/inaccessible package.
MSI (s) (7C:7C) [08:08:43:668]: Note: 1: 1706 2: -2147483647 3: MOMAgent.msi
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Processing net source list.
MSI (s) (7C:7C) [08:08:43:668]: Note: 1: 1706 2: -2147483647 3: MOMAgent.msi
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Processing media source list.
MSI (s) (7C:7C) [08:08:44:744]: Note: 1: 2203 2: 3: -2147287037
MSI (s) (7C:7C) [08:08:44:744]: SOURCEMGMT: Source is invalid due to missing/inaccessible package.
MSI (s) (7C:7C) [08:08:44:744]: Note: 1: 1706 2: -2147483647 3: MOMAgent.msi
MSI (s) (7C:7C) [08:08:44:744]: SOURCEMGMT: Processing URL source list.
MSI (s) (7C:7C) [08:08:44:744]: Note: 1: 1402 2: UNKNOWN\URL 3: 2
MSI (s) (7C:7C) [08:08:44:744]: Note: 1: 1706 2: -2147483647 3: MOMAgent.msi
MSI (s) (7C:7C) [08:08:44:744]: Note: 1: 1706 2: 3: MOMAgent.msi
MSI (s) (7C:7C) [08:08:44:744]: SOURCEMGMT: Failed to resolve source
MSI (s) (7C:8C) [08:08:44:744]: Note: 1: 1714 2: Microsoft Monitoring Agent 3: 1612
CustomAction returned actual error code 1612 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (7C:8C) [08:08:44:744]: Product: Microsoft Monitoring Agent -- Error 1714.The older version of Microsoft Monitoring Agent cannot be removed. Contact your technical support group. System Error 1612.
Error 1714.The older version of Microsoft Monitoring Agent cannot be removed. Contact your technical support group. System Error 1612.
Action ended 8:08:44: RemoveExistingProducts. Return value 3.
Action ended 8:08:44: INSTALL. Return value 3.
Ok so the obvious is that the installer is looking for original source installation files and not able to find them. What is surprising to me however is that the product references a 32 bit scom agent guid
387306D9-78CE-4E0E-B952-28A50CC8B3EE, however this is a 64 bit machine. Our build process dictates that a 64 bit machine only receive a 64 bit SCOM agent.
Doing a search on this product guid I realized I skipped some other references at the top of the MSI log that might offer some more explanation...
MSI (s) (7C:8C) [08:08:11:896]: PROPERTY CHANGE: Adding OM_OM12_SP1_AGENT_FOUND property. Its value is '{8B21425D-02F3-4B80-88CE-8F79B320D330}'.
MSI (s) (7C:8C) [08:08:11:896]: PROPERTY CHANGE: Modifying OM_OM12_SP1_AGENT_FOUND property. Its current value is '{8B21425D-02F3-4B80-88CE-8F79B320D330}'. Its new value: '{8B21425D-02F3-4B80-88CE-8F79B320D330};{387306D9-78CE-4E0E-B952-28A50CC8B3EE}'.
MSI (s) (7C:8C) [08:08:11:896]: Skipping action: _StopCoreServices.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 (condition is false)
MSI (s) (7C:8C) [08:08:11:896]: Skipping action: _KillOMProcesses.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 (condition is false)
MSI (s) (7C:8C) [08:08:11:896]: Doing action: _Set_OM_AGENT_FOUND
Action ended 8:08:11: FindRelatedProducts. Return value 1.
MSI (s) (7C:8C) [08:08:11:896]: PROPERTY CHANGE: Adding OM_AGENT_FOUND property. Its value is '{8B21425D-02F3-4B80-88CE-8F79B320D330};{387306D9-78CE-4E0E-B952-28A50CC8B3EE}'.
Action start 8:08:11: _Set_OM_AGENT_FOUND.
MSI (s) (7C:8C) [08:08:11:896]: Doing action: _Set_MOMV3_AGENT_FOUND
Action ended 8:08:11: _Set_OM_AGENT_FOUND. Return value 1.
MSI (s) (7C:8C) [08:08:11:896]: PROPERTY CHANGE: Adding MOMV3_AGENT_FOUND property. Its value is '{8B21425D-02F3-4B80-88CE-8F79B320D330};{387306D9-78CE-4E0E-B952-28A50CC8B3EE}'.
Action start 8:08:11: _Set_MOMV3_AGENT_FOUND.
Well that is interesting, seems to me that in the first line the MSI installer reads the OM_OM12_SP1_AGENT_FOUND property and identifies this with a 64 bit agent guid (8B21425D-02F3-4B80-88CE-8F79B320D330), but then appends
the 32 bit guid at the end (387306D9-78CE-4E0E-B952-28A50CC8B3EE). This is the point of my confusion and my suspicion as the cause of the problem I am having.
Concluding thoughts:
Why does the installer seems to first recognizes a 64 bit agent, but then later changes it's property to include a 32 bit agent guid.  Could a 32 bit agent have got on this 64 bit server based on the details of this log? Would this
cause my agents to fail the upgrade? I think so, but looking to bounce this over to another fellow SCOM colleague who may have wrestled with this before.
Thanks in advance if you took the time to read this and think about it. Extra points if you have any extra thoughts!
Keith

Hi,
Have you used Requirement to limit the platform when you deploy application with SCCM.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

IPhoto library upgrade failed, one third of the photos lost, but the library works as normal. No corruption.

Hello! I recently replaced my tragically crashed Macbook Pro 2008 with a newer model and transferred my volumous iphoto library of 20 000+ photos to my new machine. To be able to use my iphoto '08 library with Aperture I had to upgrade the library in the iphoto '11 version. I left the computer on during the day, and when I got back it seemed to work fine. I browsed my library in Aperture and could see all the thumbnails, but looking closer I noticed a small yellow warning triangle with an arrow in the corner of some pictures. Turns out all pictures from before ~2010 are lost! When I wiev the photos I see nothing but the infinite black of the data void.
Here's how I've tried to fix the problem:
1. Opening the iPhoto Library package in Finder. All the folders for the earlier dates are there, but they are empty. I notice no incorrect or impossible dating, which seemed to be a common problem among users who's libraries where corrupted during the upgrade process.
2. Rebuilding the iphoto library in iphoto. No effect.
3. Recovering the iphoto library from my Time Machine Backup. SInce my old hard drive was just 200 GB, I stored all pictures older than one year on my external hard drive (note that about half of those pictures were successfully imported/upgraded). Both the internal and the external hard drive where backed up using Time Machine on a NAS from Seagate (Black Armor 110, 3TB). I was able to access backed up files on my external drive through Time Machine on my old computer, but since it is now rendered unbootable I tried using Migration Assistant to let my new computer inherit the old backup. However, I could not find the backup of the external drive in Migration Assistant, just my old internal drive. When I tried to access the backup volume on my NAS through Finder it didn't show up (I could find it that way on my old computer).
4. Googling "iPhoto library upgrade failed", or "Inheriting Time Machine backup of external drive", and similarily desperately specific phrases - Nothing useful. Other people seems to have had problems with corrupt Libraries, but I'm not sure that's the case here.
My pictures must exist somewhere on my computer and in a backup on my NAS. I just can't find them! Do anyone have a clue to what may have gone wrong? I'm afraid the computer might have gone to sleep during the upgrade, because I didn't thinkabout adjusting the power saving settings before starting it. But since pictures 1-8000-something are missing, it doesn't seem to have worked properly during the whole beginning of the upgrade, not just during the middle. As I knew I had a backup of the library I didn't worry about upgrading the single functional copy. From now on I will think thrice before doing anything as serious as this.
I am eternally grateful for any answers that might help me recovering my photos!
//Teodor Nilson

b) I split up my photo collection into two iphoto libraries. One for the new photos stored on my internal HD            and one for photos older than one year stored on my external HD
And exactly How did you Split up your iPhoto library?
c) I used Migration Assistant in an attempt to access the Time Machine backup of my old MBP from my new      MBP (by inheriting the backup). When I made my backups, I made sure Time Machine included the external      HD. But Migration Assistant could only find the backup of my Internal HD with the library of new photos!
And again
You should not use Migration assistant on an iPhoto library - it generally does not work
and
     d)   When signing in and mounting the NAS in Finder, I used to be able to see a Time Machine backup      folder/icon. Now I was unable to locate it.
I believe you are using your NAS for your Time Machine backup. If your Time Machine backup and/or your iPhoto library is on a NAS you will have problems - both need to be on Mac formatted volumes - the least troublsome is a volume formatted Mac OS extended (journaled)
http://support.apple.com/kb/HT1427?viewlocale=en_US&locale=en_US
Manually preparing a new disk for Time Machine
If you want to erase a disk before using it with Time Machine, follow these steps:
Open Disk Utility (located in the Utilities folder).
Connect the disk if it isn't already attached.
In the left side of the Disk Utility window, select the disk you want to use with Time Machine.
Optional: If you want to partition the disk, click the Partition tab and select a layout. Make sure "Mac OS Extended (Journaled)" is selected in the Format menu for the partition that will be used for backups. Click Apply.
Click the Erase tab.
Optional: If you want to securely erase the disk, click Security Options to configure, then click OK.
Click Erase.
After erasing, open Time Machine preferences in System Preferences and configure as described in the section above.
Are the iPhoto libraries kept on an external drive formated Mac OS extended (journaled)? Or are they on the NAS? - If you are using the NAS for iPhoto and/or Time Machine that is the source of your problems
LN

ITunes upgrade fails due to QuickTime

I tried to upgrade my iTunes to version 9.3.xx. Unfortunately the upgrade failed. The application since then is not opened and the following error message appeared.
“Error writing the file c:\Program Files\Quick Time\QTTask.exe
Verify that you have access to that directory”
I followed all the support suggestions uninstalling all the Apple applications and re-installed them back but with no luck. The above message appears every time iTune is trying to install QuickTime and as iTunes needs QuickTime the whole upgrade fails.
Any suggestion how I can solve this issue?
BR// Markos

“Error writing the file c:\Program Files\Quick Time\QTTask.exe ... Verify that you have access to that directory”
That's consistent with disk/file damage, Markos.
Let's first try running a chkdsk over your C drive. There's instructions and a guided help in the following Microsoft document:
[How to perform disk error checking in Windows XP|http://support.microsoft.com/kb/315265]
Does the chkdsk find/repair any damage? If so, are you able to successfully reinstall QuickTime afterwards?

Creative Zen Microphoto - "Firmware upgrade failed&qu

Hi,
two days ago my Zen Microphoto started in "Recovery Mode".
I had no means of getting out. I first selected "Clean Up" and rebooted, still "Recovery Mode".
Then I downloaded the latest firmware version for it:
ZENMicroPhoto_PCFW_L6__3_0.exe
Then I selected "Upgrade Firmware", acknowledged with "Yes", the firmware was deleted, but the windows firmware application said "no player connected" after connecting the player.
Okay, after googling a bit, I found out that I needed to downgrade from WMP to WMP 0.
I (painfully) did this and after installing an additional Registry Key via fixup.cmd the
ZENMicroPhoto_PCFW_L6__3_0.exe
detected the player (hurray!). It showed "Current Player Firmware Version .20.0 " and "Upgrade File Version .3.0".
When clicking on "Upgrade" at the windows application, the blue progress bar appeared and the player showed "Recovery Mode" and a blinking USB logo.
What it did NOT show afterwards was a gear symbol with "Upgrading firmware" (which I found on a screenshot in the internet).
When the blue progress bar of the windows firmware upgrade application reached about 85% it halted and after minute the windows firmware application showed "Firmware upgrade failed!" while the player only showed a black screen with "Recovery Mode" and the green battery symbol at the top.
I also tried the same procedure with
ZenMicroPhotoP4S_PCFW_LB__20_0.exe with the same result: "Firmware upgrade failed!"
Any ideas how to "repair" the player
Toddl
Message Edited by Toddl on 04-2-2008 09:40 AM

I have this same problem except with the Zen Vision: M. Any help would be appreciated.

RAC Install fails with "OCR upgrade failed with (-1073741819) on 10.2.0

I am trying to install RAC 10.2.0 with two Server 2003 R2 nodes connected to a fiber channel SAN. I have set up the shared storage, created the extended partitions, and setup the unformatted no drive letter volumes. Both servers see the unformatted volumes (and no others do). The preinstallation checks work fine and the installations works fine until the first configuration assistant runs. That would be the "Oracle Clusterware Configuration Assistant". It tries to run crssetup.config.bat and fails on step 3 (configuring OCR Repository) with
ocr upgrade failed with (-1073741819)
If I uninstall clusterware and try again it will not show the OCR and Voting disks as available disks until I delete the volumes and partitions and recreate them. I have run the precheck batch files and they show everything as good as well. When I define the OCR and Voting drives in the clusterware setup I do not select format or assign drive letter. Every time I try to do the install I get the exact same error.
Is there anything I am missing or some trick or patch I may not have done?

Take a look at this notes!!
Note 341214.1 - How To clean up after a Failed Oracle Clusterware Installation on Windows
Note 388730.1 - Oracle RAC Clusterware Installation on Windows Commonly Missed / Misunderstood Prerequisites
Rgrs,
Paulo.

Crystal report runtime 13.0.2 passive upgrade fail

Hi,
my configuration is:
- Windows 7 ultimate 32 bit.
- Crystal report (13.0.1) installed
If i upgrade product (Crystal Report) manually all work fine.
If i install in passive mode, instead, with below command line, the upgrade fails and product remain unchanged.
msiexec /i CRRuntime_32bit_13_0_2.msi /passive
Can you verify this problem ?
Thanks in advance for your response.
Best Regards.
Niko Furioso

Hello,
CR for Vs 2010 requires an uninstall first. I'll check with out build team to see if this is supported.
In the mean time you could add this to your installer:
Update Options
The Windows Installer command line can apply or remove updates (patches for example) through these options:
msiexec.exe [/update][/uninstall[/package<product_code_of_package>]]
<path_to_package>/update - apply updates (if there are multiple updates, you can separate them through the ";" character)
/uninstall - remove an update for a product (if there are multiple updates, you can separate them through the ";" character)
/package - specifies the package for which the update is removed
Sample command lines:
msiexec.exe /update "C:\MyPatch.msp"
msiexec.exe /uninstall {1BCBF52C-CD1B-454D-AEF7-852F73967318}
/package {AAD3D77A-7476-469F-ADF4-04424124E91D}
Don

WRT350N- Firmware Upgrade Failed

when upgrading with .bin file (v1.05.8) via Administration - Firmware Upgrade, it fails when status showing 76% completion.
Please help what i need to do?
I already tried to boot in safe-mode to minimize programs running (firewall, etc), still showing Upgrade failed.
/v
Message Edited by viva on 10-20-2007 06:56 AM
(Edited subject to keep threads from stretching.
Thanks!)
Message Edited by JOHNDOE_06 on 10-20-2007 06:59 AM

Go to the control panel/network connections and right click on the local area connection. Click properties and roll down to highlight Internet protocol TCP/IP. Click the properties button and check "use the following IP address". Fill in 192.168.1.5 and tab through. The subnet mask will fill itself out to 255.255.255.0
make the preferred DNS server 192.168.1.1 (the router) and click okay.
If the computer succeeds in getting an IP address (verify this by opening a command window and typing "ipconfig" and seeing what it say under the local area connection), type ping 192.168.1.1 in the same command window and see if the router responds.
If so, you can use the TFTP.exe utility from linksys, available from linksysinfo.org at
http://www.linksysinfo.org/forums/downloads.php?do=file&id=4
Run this program, point it at the router IP 192.168.1.1 and show it the bin file you want to use. Might be a good time to use the released firmware rather than a beta. But that is your call. You can get the latest firmware from the linksys page.
If you are unable to ping the router, try putting the ethernet cable in a different port. Don't ask me why, but when my router bricked, it would only work on slot 4. Found this out by accident, but I was able to fix the router when I did this. If it does not work on any slot, you may be screwed. Call linksys and ask for a RMA to get a replacement. I would not tell them you bricked it with a beta firmware!

IPad IOS6 upgrade failed, iPad is now frozen

My iPad is 3rd generation, and I run iTunes (latest version) on a Windows 7 laptop.
Initially I chose to 'download only' in iTunes. Subsequently I started the upgrade process with the iPad connected to iTunes.
I got an error message saying the upgrade failed.
Now my iPad is showing the symbol to connect with USB cable to iTunes, but the iPad is not appearing in iTunes.
I've gone through the trouble shooting guide (checking versions, restarting computer etc.).
If I try to restart my iPad (pressing on/off and homebutton simultanously for 10 secs) it simply turns off the screen, and when I turn it on it displays the same again.

Force iPad into Recovery Mode
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times.

Database upgrades fails

Platform: SQL Server 2008
Running P6 R7 SP5
When trying to upgrade the database to R8, database upgrades fails without any error message.
I just ran the dbsetup.bat and filled the "connection information" then press next and I got the "finish" screen directly without the "Ready to begin upgrading data" or "Primavera database setup wizard" and when check I found that no upgrade has been done.
please assest.

Thanks Alex for reply,
I've tried the above steps and I got the same action.
I can't see any strange in the console logging.
console logging_____________________________________________________________
DEV [INFO] : Look and feel is com.sun.java.swing.plaf.windows.WindowsLookAndFeel
DEV [INFO] : Setting job property unicode ->
DEV [INFO] : TRANSITION: operation_pm -> connect_upgrade_ss
DEV [INFO] : Calling operator SetProductSuiteTransOp
DEV [INFO] : Setting job property PRODUCT.SUITE.KEY -> PM
DEV [INFO] : Calling operator SetProductSuiteTransOp
DEV [INFO] : Setting job property PRODUCT.SUITE.KEY -> PM
DEV [INFO] : Calling operator SetActionTypeTransOp
DEV [INFO] : Setting job property ACTION.TYPE.KEY -> UPGRADE
DEV [INFO] : Calling operator SetServerTypeTransOp
DEV [INFO] : Setting job property SERVER.TYPE.KEY -> SQLSERVER
DEV [INFO] : Setting job property PRIVILEGED.USER.NAME.KEY -> PRIVUSER
DEV [INFO] : Setting job property PUBLIC.USER.NAME.KEY -> PUBUSER
DEV [INFO] : Calling operator SetLicenseTypeTransOp
DEV [INFO] : Setting job property LICNESE.KEY.TYPE -> MK
DEV [INFO] : Setting job property lictype -> _mk
DEV [INFO] : Calling initializer SetHostnameToCurrentMachine
DEV [INFO] : Calling page post processor SetSqlServerConnectStringTransOp
DEV [INFO] : Connection for class ADMINISTRATIVE in page (connect_upgrade_ss) fr
om page (connect_upgrade_ss) = sa/sa@sqlserver:servername:1433:PMDB
DEV [INFO] : Calling page post processor SetSSUpgradeSchemaType
DEV [INFO] : Setting job property PRODUCT.UPGRADE.KEY -> PM
DEV [INFO] : Calling page post processor SetSSUpgradeVersionFileString
DEV [INFO] : Setting job property PM.PRODUCT.KEY -> PM
DEV [INFO] : Setting job property EXP.SCHEMA.NAME.STRING.KEY -> PM
DEV [INFO] : Setting job property SCHEMA.INFO.LIST.KEY -> [PM_08_00_00]
DEV [INFO] : Setting job property PRODUCT.INSTALLED.VERSION.KEY -> 0700.0001.000
1.0003
DEV [INFO] : Calling page post processor SetSSUpgradeExpUseUnicode
DEV [INFO] : Calling page post processor SetPMUpgradeSchemaInfoListTransOp
DEV [INFO] : Setting job property PM.PRODUCT.KEY -> PM
DEV [INFO] : Setting job property SCHEMA.INFO.LIST.KEY -> [PM_08_00_00, null]
DEV [INFO] : Calling page post processor SetUpgradeNeedsWebUserOptionsPage
DEV [INFO] : TRANSITION: connect_upgrade_ss -> finish
DEV [INFO] : Calling initializer AddTextToDataInitialize
DEV [INFO] : Setting job property unicode ->

Windows 10 Upgrade fails

Similar Messages

Maybe you are looking for