Windows 2012 upgrade plan to R2 hosted with SCOM 2012 SP1
Dear Experts,
Currently we are hosting SCOM 2012 SP1 on Windows 2012 Operating System and the Server team plan to upgrade Windows server OS 2012 to Windows OS 2012 R2.
So, Is there any Potential road blocks and things to take care for SCOM 2012 SP1 if we want to upgrade the Windows 2012 R2 OS.
Thanks,
Saravana
Saravana Raja
Hi,
I have seen this a couple of times without any issues.
Just make sure you backup all SCOM related (databases if local, management packs etc).
www.coretech.dk - blog.coretech.dk
Similar Messages
-
Dell server hardware component monitoring with scom 2012 R2.
hello ..
We have some dell poweredge r710 SFF 2X SIX CORE X5 SAS Servers ,I need to monitor its hardware components with scom2012 R2.I have installed os:windows server hyper-v server on this and windows server core OS management packs on scom and monitoring
working fine .next I want to know their is Latest Management pack available for this dell model server and what are hardware components can be monitored with scom 2012 R 2. I want to monitor Hardware failure such as Power failure ,cpu failure,disk
failure and NIC failure etc
Thanks
RichaHi,
Please refer to the User’s Guide of the DELL MP:
http://support.dell.com/support/edocs/software/smconect/msscom/40/en/ug/pdf/Dell_Server_Management_Pack_Suite_v4.0_UG.pdf
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Meanwhile, considering this is related to DELL products, if you need more information or further investigation, please also contact DELL support
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
OEM integration with SCOM 2012
Hi,
Can anyone help me out on the topic- OEM integration with SCOM 2012.Are you refer to this document
Oracle® Enterprise Manager Installation and Configuration Guide for Microsoft System Center Operations Manager Connector
http://docs.oracle.com/cd/E24628_01/install.121/e28572.pdf
Roger -
I can't install Windows 7 key over KMS host with WS 2012 R2
Hi
I have a KMS Host with Windows Server 2012 R2. I don't have problems installing keys for Windows 8, Windows 8.1, Office 2013, Windows Server 2012 R2. However, when I tried install keys for Windows 7, Windows 2008 R2 and Windows 2008, I have the next message:
C:\slmgr.vbs /ipk <Windows 7 key>
Error: 0xC004F050 The Software Licensing Service reported that the product key is invalid
I've installed the keys from the same source.
GaryHi
I have a KMS Host with Windows Server 2012 R2. I don't have problems installing keys for Windows 8, Windows 8.1, Office 2013, Windows Server 2012 R2. However, when I tried install keys for Windows 7, Windows 2008 R2 and Windows 2008, I have the next message:
C:\slmgr.vbs /ipk <Windows 7 key>
Error: 0xC004F050 The Software Licensing Service reported that the product key is invalid
I've installed the keys from the same source.
Gary
For a KMShost with the OS=WS2012R2, you cannot, and, there is no need to, install any other Windows KMShost keys. The WS2012R2 KMShost key, by itself, will activate the KMShost OS, and will also enable the issuing of activations for ALL Windows KMSclients.
Office KMS features are different, and do need to be installed for Office KMSclient activations.
The error you are experiencing is expected, and is a result of your attempt to perform an unnecessary configuration step.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
Best Practice restart HyperV host with WinSrv 2012 R2 virtualized DC
I would like to know if restarting a HyperV host with a virtual 2012 DC on it is supported with the standard Hyperv VM settings:
Automatic Stop Option “Save the Virtual Machine state"
Automatic Start Option “Automatically start if it was running when the service stopped”
So basically the state of the virtual DC will be saved and written to disk and it will start when the HyperV services are started after the restart of the host.
Is this way supported or wise or should I shutdown the virtual DC manually and start the DC manually whenever the host is up and running again?> Automatic Stop Option “Save the Virtual Machine state"
Change this to "shutdown".
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :)) -
Windows 10 Upgrade Checked PC Shows Issues With Drivers
I have a Toshiba Satellite C655D, running Windows 7 Home Premiumwith the Service Pack 1 (SP1), 64 bit operating system. When I open up the Windows 10 Upgrade Reservation window, I clicked on the button on the upper left hand corner which open up a side panel on the left hand side. I go down and click on "Check your PC." It then gives me the message "This PC can be upgraded but there may be some issues." Because of those issues the following devices might not work properly, Those devices are, "Terminal Service Keyboard Driver" and "Terminal Server Mouse Driver."
I posted this same message over at the Microsoft forums and someone told me to check with Toshiba to see if there are any drivers or patches that need to be updated. I've checked here at Toshiba and thus far there are no updated drivers or patches I need to download. In fact here at the Toshiba forums they have set up a thread with links that lead to Microsoft for anyone who has questions about Windows 10. It appears no one from either side knows what any of this means or how to resolve it.
Does this mean I won't be able to download this free upgrade to Windows 10? Or can I still download the free upgrade to Windows 10 but have to download separate drivers? If I have to download separate drivers where do I download the proper ones that are compatible for my computer and Windows 10?
So my original questions still stands. All help will be appreciated!Someone will say "Post your full model number and part number from the sticker on the bottom" and I apparently got here first, so I might as well post that. That way, people know the full specs of your machine. I didn't get that hardware check when I clicked the white window icon. I just got a screen to input my email address.(eta: I went back and found that, clicked it. It found no hardware issues. It said the Toshiba DVD player might not work. Try running the Win8 upgrade assistant and see what it says, because it might provide more detail.) There is a Windows 8 Upgrade Assistant, and apparently they say use that to check your hardware for Win 10. I ran it on my L505-ES5034 an early i3 Windows 7 machine. It didn't find any issues. I ran it on my U505-S2012 or whatever it is, Windows 7 machine with a touch screen, and it told me that the touch screen may possibly not be compatible with Windows 8. There are different requirements for Win8 touch screen vs. Win7, though. But I didn't get any warmings about terminal services, which I associate with remote access. Jerry Lippey and I are running the Win 10 evaluation builds on older Core2 Duo machines. Mine is a 2009 or 2010 model. I really haven't seen any hardware issues. I've had numerous problems with Cortana and start menu and desktop stop working and refuse to restart, though.
-
Issues with SCOM 2012 Agent on Red Hat 5 Server
We are running SCOM 2012 server and have deployed the agent successfully to a number of Red Hat Linux servers. I am having an issue on about a quarter of the hosts, in that they appear as HEALTHY but are Grayed out and not green. When I look at the /var/opt/microsoft/scx/log/omiserver.log
file I see:
WARNING: wsman: authentication failed for user scom2012
I have verified that the system account is setup with the correct password and the runas account is setup with the correct password (i am able to deploy the agent from the SCOM server using it, so the passwords DO match).
Any ideas?We are running SCOM 2012 server and have deployed the agent successfully to a number of Red Hat Linux servers. I am having an issue on about a quarter of the hosts, in that they appear as HEALTHY but are Grayed out and not green. When I look at the /var/opt/microsoft/scx/log/omiserver.log
file I see:
WARNING: wsman: authentication failed for user scom2012
I have verified that the system account is setup with the correct password and the runas account is setup with the correct password (i am able to deploy the agent from the SCOM server using it, so the passwords DO match).
Any ideas?
I've seen this on a few systems here when the agent has been upgraded but the old agent process does not die off. Just to rule it out, pick a node, make sure there are no instances of scxcimserver or scxcimprovagt and then start the agent and
see if the issue goes away. I've also seen wsman authentication failures related to the libssl issue that was fixed in yesterday's release. -
Issues with Monitoring Azure services with SCOM 2012 R2
Hi,
I'm trying to setup monitoring of our Azure subscriptions in a new installation of Operations Manager 2012 R2 which is running in-house as it is also monitoring our internal services. I've used the guide below:
http://blogs.msdn.com/b/walterm/archive/2013/04/13/first-impressions-on-system-center-management-pack-for-windows-azure-fabric-preview-for-scom-2012-sp1.aspx
This has all worked OK and I've been able to add the subscription into OP Manager and it's found the cloud service, storage and VM's. However when I try to add the monitoring and I go to create this When I select the Add option in the Add Monitoring
Wizard and click the Search button to list the components (Cloud Service, Storage and VM's) nothing is found despite me having already selected the subscription.
Has anyone else experienced this or can offer any advice?
Many Thanks
ColinHi,
Which version of RDP client you are using for your client?
Does more user login at same period of time?
As you have commented that after sticking the user can’t able to login in RDCB server, here I can suggest you to check the setting of connection broker. Also you can check that you have place the proper location path of UPD while configuring in collection configuration
wizard. You can take a look at below article foe virtual desktop configuration.
Deploying Virtual Desktops with Windows Server 2012
Are you trying to use same UPD for different collection then also it might happens to occur your issue. The fact of UPD is User profile disks are for a single collection only. A user connecting to two different collections will have two separate profiles. If
you want to synchronize settings, refer to Microsoft User Experience Virtualization. Go through this article for more understanding related to UPD.
Working with User Profile Disks on Session-Based Desktop Deployments
Hope it helps!
Thanks. -
EM 12C Integration with SCOM 2012
Hi
Has anyone integrated EM12C ( running on Solaris Sparc ) with MS SCOM 2012 ? Just looking for any hints / tips /issues ... etc ...
Any thoughts appreciated.
Regards
RobIf the integration is along the lines of forwarding events from Enterprise Manager 12c to SCOM, then we are currently finalizing an event connector for SCOM 2012. It will enable the sending of events from Enterprise Manager to SCOM.
Regards,
Ana -
Exchange 2010 and 2013 Monitoring with SCOM 2012
HI all,
I have exchange 2013 and 2010 in my environment , Iwant monitor both in SCOM 2012,
Can you all please tell can i implement 2013 monitorinng first later can i go to 2010 Monitoring, Please advise in that supported or do i need to go with exchange 2010 monitoring firstThere are no dependencies on the 2010 MP so you should be good to go, see the following:
-
SCCM 2012 integration with SCOM 2012 - Disable Alerts during patching
Have SCCM 2012 R2 and SCOM 2012 R2 and use the Software Update Patching process for servers. When using the checkbox to "Disable Operations Manager Alerts when this program runs" option have noticed on completion of the job and the target
server is rebooted, a scheduled task appears for a short time titled "SCOM 2007 Agent Resume Task". The task disappears and there is no history to view.
Is this a legacy naming convention from 2007 world when the maintenance mode is turned off from the SCCM patching process?
How do I see the actual code behind the SCCM and SCOM integration with Maintenance mode to validate it.SCCM should use the following SCOM SDK to do that.
http://msdn.microsoft.com/en-us/library/bb437532.aspx
That's incorrect. There is no API or method to put an OpsMgr agent into maintenance mode on the client itself -- maintenance mode is a centrally controlled feature of OpsMgr. The API/code sample you linked is performing that activity on the management server
which assumes you know the management server name and have permissions to carry out the action -- neither of which is fulfilled by the ConfigMgr agent.
The ConfigMgr agent pauses the OpsMgr client agent service and also unloads the workflows from the OpsMgr agent (it only did the first part in ConfigMgr 2007). This effectively puts the agent in Maintenance Mode (although to my knowledge this is not directly
reflected in the OpsMgr console).
Jason | http://blog.configmgrftw.com -
Monitoring services on MSMQ cluster with SCOM 2012
Hello guys,
I'm looking a way that SCOM 2012 is able to monitor several services installed on MSMQ cluster. I think it's possible that SCOM 2012 can generate alert through the message queuing service associated to these services but this is an indirect monitoring. I
would want that SCOM generates the alert for the specific service in problem.
Any suggestion?
Thank you very much.Hi,
There is a management pack for Message Queuing.
You can download it from http://www.microsoft.com/en-us/download/details.aspx?id=36775
Hope it help's
Greetings,
Roel Knippen
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
How to setup Tiering with SCOM 2012 class libraries?
Hi All,
I've two SCOM servers installed in two different machines and SCOM will have some alerts. I want to connect the two so that one acts as top tier and other one as lower tier. The top tier will show all the alerts from the lower tier in
the connected alerts. From there I'm passing the alerts to external system for processing. I want to establish the tiering programmatically using the SCOM 2012 API. I know of method
TieringManagement.AddTier Method (String, ManagementGroupConnectionSettings, SecureData, Boolean)
Help me how can I achieve this by using the above method.
Thanks in advance.
viRaTo configure method TieringManagement.AddTier Method, you can refer to below links
http://msdn.microsoft.com/en-us/library/hh332072.aspx
http://msdn.microsoft.com/en-us/library/hh350608.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer". -
Weblogic Monitoring with SCOM 2012
Hello,
I need to monitor WebLogic 10.3 installed on Windows Server 2008 SP2 so I added these MP :
Microsoft.JEE.WebLogic.Library.mp
Microsoft.JEE.WebLogic.10gR3.mp
Microsoft.JEE.Library.mpb
Microsoft.JEE.Templates.Library.mpb
And I created a specific basic account (with administrator application rights) that I linked to the JEE Monitoring Account Profile.
I checked in the Event Viewer and I got : Event 1109 - All credential references resolved successfully.
But when I can't see anything in the Weblogic Application Servers specific views. And in the Heath Explorer of my server I have this :
For information, I don't get any error in the event viewer about this.
Can someone help ? Thanks.1) What is the exact version of WebLogic that you're installing?
WebLogic Server Version: 10.3.0.0
2) In the WebLogic installation root, there is a registry.xml file. What is the version
listed for the Xpath: /bea-product-information/host/product/release?
<release level="10.3" ServicePackLevel="0" PatchLevel="0" Status="installed" BeaProgramGroup="Oracle WebLogic" StartMenu="C:\Documents and Settings\All Users\Start Menu\Programs"
InstallTime="Oct 17, 2008 5:10:52 PM" InstallDir="D:\bea10.3" JavaHome="D:\bea10.3\jdk160_05" JavaVersion="1.6.0_05" JavaVendor="Sun">
3) In the domain, is there a domain-registry.xml? If so, what are its contents?
In the domain, domain-registry.xml is missing.
4) Are there managed servers on that WebLogic domain & the same machine? If
so, have they been discovered?
Yes there is a managed server on that Weblogic domain on the same machine, no it hasn't been
discovered.
5)
What do you mean by "There is no monitoring of Weblogic admin servers". Here the monitoring needs of our application admin :
connections per application
Weblogic server status (running / problem /other)
JVM Memory
6) You mentioned that you enabled unit monitors, can you clarify specifically which unit monitors you enabled?
7) Have you tried the PowerShell script yet & did that work?
Not yet. I will try. -
Windows Monitoring Checklists for SCOM 2012 R2
Hi All,
We are in SCOM 2007 to 2012 migration stage where we will have to check Windows monitoring with SCOM 2012 that how it works better than 2007, what all new components to be considered and focused. Kindly share if you have any checklists to be verified before
we proceed further. Usually resources like CPU, Memory, File System and Network Performance, Services, events and logs monitoring would be considered. Help to get if anything I missed to list out here.
Thanks.
Regards,
Raj.Hi,
If you are looking for system requirements for installation of SCOM 2012 R2, please refer to the below link:
System Requirements: System Center 2012 R2 Operations Manager
http://technet.microsoft.com/en-us/library/dn249696.aspx
And more details about how to upgrade from SCOM 2007 R2 to newer version, the below article should be helpful.
Upgrading from System Center Operations Manager 2007 R2
http://technet.microsoft.com/en-us/library/hh476934.aspx
We should import management packs according to your environment and your need. For example, to monitor Windows operating system, we should import Windows operating system management packs.
To monitor AD, we should import Active Directory corresponding management packs.
Regards,
Yan Li
Regards, Yan Li
Maybe you are looking for
-
Cannot transfer videos and Photos from Iphone 3GS to my PC or MacBook
I have an Iphone 3G and my wife has a 3GS. On the 3G Windows XP or my MacBook will see the iphone as a camera. But on the 3GS neither OS will see the iphone as a camera. They both just open Itunes I took a lot of video over the weekend with the 3GS a
-
Error Message: Could not read this files because the plugin could not recognise the file
It wont let me open a file I saved yesterday? What does this error message mean & how do I fix it?
-
Is there an app where I can monitor my childs texting/instagram?
Is there an iphone app where I can monitor my childs texting/instagram messages?
-
I frequently click on items to email to my email or to someone else using my Gmail account. I would just right click on it, then click share. Now instead Yahoo comes up. How can I get my Gmail to come up again?
-
When your search tab is on you can't highlight or add note etc to the pdf. While this was possible in previous version. Please fix this, it's very annoying