Windows 7/32bit DELL T5500 Desktop shutdown by itself

We have DELL T5500 Machines in a customer site used for process control applications. This has OS windows 7 32 bit and has dual screen connected with Nvidia Quadro 295. There are over 125 machines in the site. Out of which 4 machines show an issue.Randomly
they are found to be in shutdown during early hours.How to find the root cause. All other machines are used by the operators continuously and these are Engineering stations are used only day time. Is the issue caused by temp/faulty hardware/driver.
how to find??.
Windows log shows events like
"kernel power manager initiated a shutdown transition"
Event 1074,User32 "The process c:\windows\system32\winlogon.exe has initiated the power off of computer EU2-E-03 on behalf of user NTAuthority\system for following reason
reason code:0x500ff
shutdown type :power off"

Hello jobymv,
Please take a look at the following KB about this issue.
https://support.microsoft.com/kb/2001061?wa=wsignin1.0
We could use the WORKAROUND:
Use shutdown.exe to initiate the shutdown. E.g. from the elevated command line run:
shutdown.exe /r /d P:4:2
This will result in an eventlog and SEL entry with reason code 0x80040002.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Similar Messages

Problem with solaris 10 08/11 installation on x86 workstation (DELL T5500)

Trying to install solaris 10 08/11 installation on x86 workstation (DELL T5500). Following error message was received after selecting the Oracle Solaris interactive Text (Desktop Session) installation method-
SunOS Release 5.10 Version Generic_147441-01 64-bit
Copyright (c) 1983, 2011, Oracle and/or its affiliates. All rights reserved.
Configuring devices.
SUNW-MSG-ID: SUNOS-8000-0G, TYPE: Error, VER: 1, SEVERITY: Major
EVENT-TIME: 0x5075a820.0x8f97a90 (0x1693e68979)
PLATFORM: i86pc, CSN: -, HOSTNAME:
SOURCE: SunOS, REV: 5.10 Generic_147441-01
DESC: Errors have been detected that require a reboot to ensure system
integrity. See http://www.sun.com/msg/SUNOS-8000-0G for more information.
AUTO-RESPONSE: Solaris will attempt to save and diagnose the error telemetry
IMPACT: The system will sync files, save a crash dump if needed, and reboot
REC-ACTION: Save the error summary below in case telemetry cannot be saved
panic[cpu0]/thread=fffffe80000b3c60: pcieb-7: PCI(-X) Express Fatal Error. (0x4)
fffffe80000b3bf0 pcieb:pcieb_intr_handler+1ea ()
fffffe80000b3c40 unix:av_dispatch_autovect+78 ()
fffffe80000b3c50 unix:intr_thread+5f ()
syncing file systems... done
ereport.io.pci.fabric ena=1693e6221600001 detector=[ version=0 scheme="dev"
device-path="/pci@19,0/pci8086,3410@9" ] bdf=2048 device_id=3410 vendor_id=
8086 rev_id=22 dev_type=40 pcie_off=90 pcix_off=0 aer_off=100 ecc_ver=0
pci_status=10 pci_command=47 pci_bdg_sec_status=0 pci_bdg_ctrl=3 pcie_status=6
pcie_command=7 pcie_dev_cap=8021 pcie_adv_ctl=5 pcie_ue_status=4020
pcie_ue_mask=100000 pcie_ue_sev=62030 pcie_ue_hdr0=0 pcie_ue_hdr1=0
pcie_ue_hdr2=0 pcie_ue_hdr3=0 pcie_ce_status=0 pcie_ce_mask=0
pcie_ue_tgt_trans=0 pcie_ue_tgt_addr=0 pcie_ue_tgt_bdf=ffff pcie_rp_status=0
pcie_rp_control=0 pcie_adv_rp_status=7c pcie_adv_rp_command=7
pcie_adv_rp_ce_src_id=2048 pcie_adv_rp_ue_src_id=2048 remainder=0 severity=44
skipping system dump - no dump device configured
rebooting...
Any ideas?

Sometimes, it's just easier and faster
to just start all over and re-install,
particularly when you have only a fresh install on your system.
This time, do not choose to include all the optional "documentation"
(that's what is held on CD5).
I have never found a reason to ever read that documentation so I stopped installing it.
... or you could download and burn a copy of CD5 and use it when prompted.

How can I login to Oracle Express Ed 11g Rel 2 on windows XP 32bit?

I installed Oracle Express Ed 11g Release 2 32bit on windows XP 32bit and I can not login ito it. Installation asked for a password to be created at installation which I used to login with.
The login window is started from a shortcut that installation created on my desktop. I tried to download and install three times. I went thru a SW removable before another download. The login responds with "Invalid Login Credentials"
I have admin rights to my PC. What could be the issue?
Please help.
Thanks.

What could be the issue? Could be many different causes. Mistyping the password is one, or the database could be offline but in most cases that will give a different error message. Open a command box, Start/Run/cmd and try:
$ sqlplus /nolog
connect system
... Password ... <the one used with the installer> ... Connected.
select name from v$database;
login window is started from a shortcut If you're talking about the Apex page, the one that opens a web browser to http://<hostname>:8080/apex and that one needs Apex credentials, not database user credentials. Apex users can be mapped to database users but that is something done via the apex administrator.
Two database accounts "out of the box" are SYS and SYSTEM users, those are special- SYS owns the catalog, SYSTEM is a user with dba role privileges, almost as powerful within the database as the SYS user.

Multimedia Audio Controller, and Video Controller(VGA compatible) are missing on Windows XP(32Bit) SP3

Hi.
My Desktop Computer(Intel P 4, 512MB of RAM, and Graphics Card with 256MB of RAM)
Also, My Desktop Computer with P 4 doesn't have any access internet since there is no network adapter is installed. As a result, I would not be able to run the pc scan utility, or Reader a web-based applet that identifies my GPU or Audio controller
and finds the latest graphics driver for my GPU, and Audio.
I have two Windows XP installations:
Windows XP SP2(32Bit) which is old and it seems it infected by some viruses.
I have installed another fresh clean Windows XP(32Bit) SP3. However, I have two devices not detected well by Windows XP.
First of all, when saying that I have multi-operationgs systems, I mean there are two operating systems installed on my PC(SP2, SP3) both are 32Bit. The first Windows SP2(NOT installed by me) has all multimedia audio card installed well,
and has SCSI and RAID Host Controller shown the device manager. However, only the VGA is not installed on Windows SP2. However, the second one Windows SP3(Installed by me) has VGA not installed, Multimedia audio NOT installed, and there is no SCSI and RAID
Host Controller in device manager.
First: Yes, my motherboard has integrated video, and integrated audio card
According to the screen shots above, then
The vendor ID of Multimedia Audio Controller is 8086 and the device ID is
24D5.
The vendor ID of Video Controller is 8086 and the device ID is
2572.
I AM EXPECTING THAT KNOWING THE VENDOR ID AND THE DEVICE ID WILL LET ME QUICKLY FIND THE APPROPRIATE DRIVER. HOWEVER, I COULDN'T FIND THE APPROPRIATE DRIVER.
Thus, could you please help me to find them?
I have tried installing a soundMAX card driver, however, I found this error.
I have checked the other Windows XP SP2(32Bit) which is oder installed, and it seems it infected by some viruses.
However, the Multimedia Audio on that Windows is installed well. As here: I only posted these screen shots to show what kind of device is Multimedia Audio Card
The motherboard model is:
Belarc Advisor Computer Profile
Operating
System
System
Model
Windows XP Professional
Service Pack 3 (build 2600)
Install Language: English (United
States)
System Locale: Arabic (Yemen)
Installed: 22/03/2013 12:03:16
ص
Boot Mode: BIOS (Secure
Boot not supported)
Enclosure Type:
Desktop
Processor
a
Main Circuit Board
b
3.00 gigahertz Intel Pentium
4
16 kilobyte primary memory cache
1024 kilobyte secondary memory
cache
64-bit ready
Hyper-threaded (2 total)
Board: 775i65G.
Bus
Clock: 200 megahertz
BIOS: American Megatrends Inc. P3.00
03/20/2007
Drives
Memory Modules
c,d
39.99 Gigabytes
Usable Hard Drive Capacity
29.48 Gigabytes Hard Drive Free
Space
COMPAQ CD-ROM LTN486S [Optical drive]
3.5" format removeable
media [Floppy drive]
WDC WD400BB-75DEA0 [Hard drive] (40.00 GB) -- drive
0, rev 05.03E05, SMART Status:
Healthy
504 Megabytes Usable
Installed Memory
Slot 'DIMM0' has 512 MB
Slot 'DIMM1' is
Empty
Local Drive
Volumes
c: (NTFS on drive 0) *
20.98 GB
14.16 GB free
d: (NTFS on drive 0)
19.01 GB
15.33 GB free
<center>
* Operating System is installed on
c:
</center>
Network
Drives
None
discovered
Users
(mouse over user name for details)
Printers
local user
accounts
last logon
عايض
لرضي
19/01/2015 10:59:17 م
(admin)
local system
accounts
Administrator
never
(admin)
Guest
never
HelpAssistant
never
SUPPORT_388945a0
never
<center>Marks
a disabled account; Marks
a locked account </center>
Controllers
Display
Standard floppy disk
controller
Intel(R) 82801EB Ultra ATA Storage Controllers
Primary IDE
Channel [Controller]
Secondary IDE Channel [Controller]
None
discovered
Bus
Adapters
Multimedia
Intel(R) 82801EB USB
Universal Host Controller - 24D2
Intel(R) 82801EB USB Universal Host
Controller - 24D4
Intel(R) 82801EB USB Universal Host Controller -
24D7
Intel(R) 82801EB USB Universal Host Controller - 24DE
Intel(R)
82801EB USB2 Enhanced Host Controller - 24DD
None
discovered
Virus
Protection [Back to Top]
Group
Policies
Norton AntiVirus Version 18.1.0.37
 Virus Definitions Version Not Up To Date
 Realtime File Scanning
On
None
discovered
Communications
Other
Devices
↓ Realtek RTL8139 Family PCI Fast
Ethernet NIC
Status:
Cable unplugged
Dhcp Server:
none responded
Physical Address:
00:19:66:1F:F7:54
USB Human Interface
Device
Standard 101/102-Key or Microsoft Natural PS/2
Keyboard
HID-compliant mouse
USB Root Hub (5x)
USB Storage Use in past 30 Days(mouse
over last used for details)
Hosted Virtual Machines (mouse over
name for details)
Last
Used
SanDisk Cruzer Blade, s/n
4C532000020502112303, rev 2.01
19/01/2015
09:32:57 م*
USB 2.0 USB Flash Drive, s/n
59309e92e21612, rev 0.00
09/01/2015
12:29:17 ص*
<center>* Possibly used again before the reboot following this
time.</center>
None
discovered
See your entire
network map...
click for Belarc's System Management products
A man should convert his anger and sadness into strength to continue living in this life.

Dont worry, dont think anyone was as a matter of fact
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=908&jump= true#M908
http://support.microsoft.com/default.aspx?scid=kb;en-us;80509
http://support.microsoft.com/default.aspx?scid=kb;en-us;84567
that worked for me, maybe it will help someone else that went through what i did, its a miracle i did not top myself after going through all this BS. ALSO dont threaten your computer with violence, cos it will always call your bluff which makes things worse

ERROR 1002 WHILE ROCOVERY DISK HP G60-441 US WINDOWS VISTA 32BIT

I HAVE HP G60-441US MODEL WITH WINDOWS VISTA 32BITS, PRODUCT NUMBER NW142UA. I TRY TO MAKE ROCOVERY DVD DISK WITH RECOVERY MANAGER BUT IT IS FIALED ON 2ND DVD. THEN I TRY TO RECOVERY WITH RECOVERY MANAGER IT SHOWS ME ERROR 1002 WHILE I PRESS OK ; COMPUTER IS RESTARTED AND BOOTMGR IS MISSING PRESS CLT+ALT+DEL FOR RESTART. AFTER THAT I CHECK HARD DRIVED MEMEROY IT IS ALSO FAILED. AND WHILE STATING COMPUTER IT SHOWS ME TO REPALCE BATTERY.
I DID ORDER RECOVERY DISK FROM HP SUPPORT AND REPLACEMENT BATTERY. IT TAKES ONE WEEK TO GET IT.
NOW I WANT TO KNOW THIS IS HARD DISK PROBLEM OR JUST SOFTWARE PROBLEM. I TRY TO DO FORMAT MY COMPUTER DUE TO BAD PROFORMANCE, TAKES TOO LONG TIME WHILE STARTING COMPUTER AND IT IS FIALED ON WINDOWS UPGARDING AND CONFIGURING.
THANKING YOU.

Hello kmdavis. I have read the issue you are experiencing. Your computer is experiencing a hardware failure, and you should contact HP technical support for further assistance. Their options will be based on the warranty status of the computer. If you do not have this information, you can locate it at this website: http://h20566.www2.hp.com/portal/site/hpsc/public/wc/home?ac.admitted=1384280905804.876444892.199480...
You can utilize this website to learn how to contact HP appropriately, based on your region: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Please let me know if you have any other questions or concerns.
Mario
I worked on behalf of HP.

I'm looking at the dell Inspiron Desktop 4th Generation Intel Core i5 Processor for photoshop work versus the Dell XPS 8700 i7 IS IT WORTH SPENDING THE EXTRA $400?

I'm looking at the dell Inspiron Desktop 4th Generation Intel® Core™ i5 Processor for photoshop work versus the Dell XPS 8700 i7 IS IT WORTH SPENDING THE EXTRA $400? my old desktop is a AMD about 5 years old so there will be a huge change in speed to what I am use to
Here are the specks on both:
Inspiron
Processor
4th Generation Intel® Core™ i5-4460 Processor (6M Cache, up to 3.40 GHz)
Operating System
Help Me Choose
Windows® 8.1 (64Bit) English
Memory2
8GB Dual Channel DDR3 1600MHz (4GBx2)
Hard Drive
1TB 7200 rpm SATA 6Gb/s Hard Drive
Video Card
NVIDIA® GeForce® 705 1GB DDR3
Ports
Front
(2) USB 2.0, MCR 8:1, Mic and Headphone Jacks
Rear
Four USB 2.0 connectors , Two USB 3.0 connectors, HDMI, VGA, RJ-45 (10/100/1000 Ethernet), 3-stack audio jacks supporting 5.1 surround sound
Media Card Reader
Integrated 8-in-1 Media Card Reader
(supports Secure Digital (SD), Hi Speed SD (SDXC), Hi Capacity SD (SDHC), Memory Stick (MS), Memory Stick PRO (MS PRO), Multimedia Card (MMC), Multimedia Card Plus (MMC Plus), xD-Picture Card(XD))
Memory Slots
2 DIMM Slots
Chassis
Bluetooth
BT 4.0 via 1705 WLAN card
Chipset
Intel® H81 PCH
Power
300 Watt Power Supply
XPS 8700
Processor
4th Generation Intel® Core™ i7-4790 processor (8M Cache, up to 4.0 GHz)
Operating System
Help Me Choose
Windows 8.1 (64Bit) English
Choose Options
Memory2
12GB Dual Channel DDR3 1600MHz (4GBx2 + 2GBx2)
Hard Drive
1TB 7200 RPM SATA Hard Drive 6.0 Gb/s
Video Card
NVIDIA GeForce GTX 745 4GB DDR3
CPU Thermal
86W
Graphics Thermal
225W/150W/75W
Power
460W, optional 80 PLUS Bronze, 85% efficient, supply available on ENERGY STAR configurations
Ports
Bays
Support for 4 HDD bays: including (3) 3.5” HDDs
–Capable of 1 SSD and 3 HDD configuration
Media Card Reader
19-in-1 Card Reader (CF Type I, CF Type II, Micro drive, mini SD, MMC, MMC mobile, MMC plus, MS, MS Pro, MS Pro Duo, MS Duo, MS Pro-HG, RS-MMC, SD, SDHC Class 2, SDHC Class 4, SDHC Class 6, SM, xD)
Slots
Memory Slots
4 DIMM

From my personal experience, I wouldn't go for an Integrated card. This is one of the most important components for Photoshop, so invest in a decent graphics card (ATI or NVidia). It doesn't have to be a really exepensive one - I have been using ATI Radeon with 256MB of RAM on my Dell Studio for almost two years and it still rocks! (even when I work with 3D in Ps CS5 Extended).
I would also invest in more RAM (this can be added easily - I bought extra 4GB as my Studio came with 3GB).
I wouldn't worry about the processor - I'm on Intel Core 2 Duo - and it works very very well, it's very quick which is very important as I'm training Photoshop.
I hope this helps.

Dell Dimension desktop sometimes won't communicate with my HP Photosmart 6510 wireless printer

At random times, when trying to print from Dell Dimension desktop to HP Photosmart 6510 wireless printer, I get a message that the computer can't communicate with the printer. The printer shows that it is connected to the Internet. I haven't changed any settings. Each time this happens, I unplug the printer and router, but it doesn't fix the problem. After about 20 minutes or so, it prints normally. It always happens at the most inopportune times. Any suggestions about how I can keep this from recurring?

These settings are for setting up your wireless printer to stay connected to your router, keeps wireless devices better connected and makes your router secure and hack proof.
1. Set a static IP in the printer (see step 6) outside the DHCP range of the router (check your manual).
2. Verify in the printer that 'Auto Off' is disabled. Use the Embedded Web Server (EWS) by going to the
    printers IP address in your browsers address bar, click Settings Tab/Auto Off. Or use the Printer
    Assistant, Printer Home Page (EWS).
In the router: (Refer to your router manual for information)
3. Use a fixed wireless channel like 1,6 or 11, never 'auto', try channel 1 first then the rest.
4. Set router to 20Mhz only, or 145Mbps depending on router.
5. Always use WPA2-AES (Personal) encryption, but you can try ‘mixed’ mode.
6. Disable WPS and never use it and disable UPnP for the routers security. Nobody can hack your
   system now and helps with wireless connectivity (if you want to know why, search the web).
7. If you have a dual band router (2.4Ghz and 5.0Ghz bands), make sure the SSID’s are NOT the same,
   they must be different for all bands, even for any Guest networks.
8. Save all settings. Power off both, wait 5 mins. Power on router wait 3 mins.
9. Power on printer and verify it reconnects to router.
Windows 7/8/8.1   Is Network Discovery on or off?
Control Panel\Network and Internet\Network and Sharing Center\Advanced sharing settings.
Under Home or Work (current profile) \ Network Discovery.
Select "Turn on network discovery" and save changes.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Creating instance oracle 10.2.0.4 on Windows 2008 32bit

Hello,
I'm trying to install oracle database (10.2.0.3 with patch 10.2.0.4) on Windows 2008 32bit.
I first installed the Oracle software, and then started to create the instance. But the dbca gives me following error:
ora-12560:TNS:protocol adapter
and instance creations fails. Also trying to create the service via the oradim fails.
Then I found this:
Install Oracle 10.2.0.3 (Vista/2008 version) on Windows 2008 Active Directory Controller.
When trying to create the database, around 2% completion, the error ORA-12560 will occur.
This Problem does NOT reproduce on a Member server. Only the Active Directory Controller.
Cause
This is currently logged as Bug 7263061.
Solution
Currently, the only workaround is to Install the software on a Non-Controller machine.
You can try demoting the Controller machine to a Member machine.
Perform the install, create the database.
When everything is setup correctly, you can promote the machine back to a Controller.
However, be aware you may have to go through these steps whenever you create a new DB.
DIM-00019: create service error
O/S-Error: (OS 1388) A new member could not be added to a local group because
the member has the wrong account type.
WORKAROUND:
None
so workaround none? or you make that controller machine to a non-controller, but this doesn't seem to be a good solution if that server is already in production???
Is there possible another solutions to get around this?
This means that I can't install Oracle on a Windows 2008? Customers will be happy, maybe I can switch them all to Linux? ;)

I care about low-budget shops, too. It's one reason you won't find me extolling the virtues of (for example) solid state hard disks, which are still not cheap enough for mass deployment.
But come on! A shop that can ONLY afford one server and one Windows license? And yet they want to install Oracle?? Really??!
I think instead of banging your head against an installation brick wall, you should help your clients and customers cut their cloth according to their means. If they want to run Oracle, then they should resource accordingly. For about AU$2500 or less, they could purchase an additional, quite capable server, install Linux on it (OEL for $99 per year, or Centos (say) for absolutely nothing), and have themselves a dedicated Oracle server running perfectly fine in a mostly-Windows environment. (The OS the database runs on is irrelevant to anyone making use of the database's capabilities, after all). If they can't spring for even that sort of money, encourage them to adjust their standard to be more realistic: a cheap desktop PC can be purchased for mere hundreds of dollars, have a free OS, and have Oracle installed (unsupported) on top of that. If even that is a step to far, I'd suggest using MySQL or Postgres instead of Oracle.
So whilst I'm certain you're not the only one encountering the problems of working in low budget environments, I'd say this is going to extremes. If someone wants to run Oracle, and if they've stumped up the several thousand dollars necessary to purchase it, it seems utter madness not to come up with a few hundred dollars more to get it running on a dedicated machine. It would be like me being able to afford the Ferrari, but not the cost of the petrol to run it on!
A suggestion I made to a lawyer friend of mine recently: purchase an Asus EEE Desktop (cost: AU$499, for 1GB RAM and 120GB HDD), replace its Windows Home Os with Ubuntu, install Oracle XE (cost: $0), attach 1TB USB drive as backup mechanism (cost: AU$210). He now runs a dedicated Oracle database server for less than US$500. I wouldn't exactly recommend that sort of thing for mission-critical environments, but it will do the job he needs it to do! The point, though, is that you just have to be realistic about it, and create an environment that matches your requirements -without picking a fight from the get-go with the installer!

Sb x-fi xtreme audio console launcher problems on windows 7 32bit

Asb x-fi xtreme audio console launcher problems on windows 7 32bit'sI recently installed windows 7, because I was tired from Windows XP, but unfortunately after installing all the drivers for my hardware I realized my 5. isn't working quite as expected.
My first problem was, that the Crystalizer didn't work, after installing tons of different software, found on creative labs forums the crystalizer started working.
Then I realized that the CMSS-3D wasn't (and still isn't working). How do I fix that ? I've tried numerous ways but nothing happens, while in windows XP everything worked fine after installing the drivers.
I also miss some configuration options in the Creative Console Launcher, namely the check boxes:
?"Automatically enable headphone settings" and "Automatically mute speakers".
Where the hell did they go?! I use them, I need them. How do I get them back? Is XP somehow privileged than 7? Isn't it supposed to be the opposite?
I also can't change the speaker configuration - it's stays 5. whatever I do, and the drop-down menu with the choices is missing?! Auto-detect option doesn't work, and if it did worked - I don't need it.

To : woj2322, You may need to download and install the Dell Notebook System Software version 5.0.5. This installs patch fixes to solve the PCI ExpressCard device not work correctly. This is only for the DELL Inspiron 520 Notebook (See Below). Microsoft patch fix info below also. Also, I see there's other people that are having the same issue, maybe you to need to download and install the patch fix for your notebook's on dell's website. It's called "Dell Notebook System Software" under "System Utilities"
DELL Inspiron 520 Notebook Release Title:System Utilities: Dell Notebook System Software, Utility, Windows Vista 32-bit, Multi Language, Multi System, v.5.0.5, A00 Description:Notebook System Software is a utility that provides critical updates and patches for your operating system.More info on the download file :
http://support.dell.com/support/down...=7&fileid=9736 Direct Download :
http://ftp.us.dell.com/utility/R43625.EXE Part of what it fixes from micrsoft.When you connect a PCI ExpressCard device to a portable Windows Vista-based computer, the device may not work correctlyhttp://support.microsoft.com/ kbid=929550

Hp probook 4420s windows 7 32bit, bios upgrade total failure.Black Screen only

i recently aquired an old laptop,i reistalled windows 7 32bit and intalled all drivers afresh the laptop was okay until i noticed the fun was constantly spining too fast so, i thought to upgrage the bios because it was several versions behind.
before i tried to upgrade i checked the current version and it was
Bios : 68AHH Ver F.09
Bios date : 6/29/2010
During installation from windows it did some sort of backup then after a few seconds of installing something it Shutdown without warning.when i tried to switch it on it nothing happens except for
'caps lock' continously blinking and wifi light is just on.
i have read some posts.like using the 'windows button + B' or 'fn+B' but nothing realy happens , i have also removed the CMOS battery and put it back again but nothing changes still the black screen.
Please assist with the correct procedure to recover the bios.
Also Just to mention the bios had no password before upgrade.

My laptop sat at BestBuy from Friday night until today (10-31-12)! They couldn't figure out how to fix the problem so I finally told them to revert my latop back to Windows 7! I hope HP reads these and will hurry up and make the updates needed so that I can run Windows 8 on my Laptop! I just bought mine in July of last year there is nothing wrong with it and after dropping about $1200.00 for my dv7-4285dx along with the Best Buy Geek Squad package I do not feel like having to drop more money into another laptop!! PLEASE HURRY AND FIX THIS I DIDN"T DROP $69.99 plus tx to not be able to use Windows 8! Even before I did the upgrade I had the GEEk Squad check to make sure I could make the upgrade and was told this laptop well surpasses the required minium to run Windows 8!!!!!!

ITunes 10.5 on Windows 7 (32bit) doesn't display the iTunes store

Hello there,
on my Windows 7 (32bit) system, already with iTunes 10.4 I encountered the problem that the iTunes store remained inaccessible - it simply wouldn't load/display. Problem was solved by removing all Apple software, cleaning up the registry, rebooting, reinstalling iTunes 10.4.1, and NOT installing Safari 5.x - because as soon as Safari got installed, the problem would reappear.
Now with iTunes 10.5, the problem is back. Only that this time it does not matter if Safari is installed or not - the store simply won't come up.
I've tried the whole support articles suggestions up and down - to no avail.
It's not a problem of firewall, antivirus, hosts file etc. - the diagnose function says clearly that even https is OK, all settings in the internet options are right, etc. etc. - I've spent days on that, and believe me, I'm sure about it.
The diagnose function says, however, than QuickTime would not be available. No matter if QuickTime IS installed or not, before or after iTunes 10.5 that says it would neither contain nor need QuickTime anymore.
After cleaning out all Apple software and its traces, a reboot, and a reinstallation of iTunes 10.4.1, the store is accessible again - only that iTunes 10.4.1 can't use my iPhone with iOS 5 on it.
So I'm either stuck with an iTunes that CAN access the store, but can NOT sync my iPhone, or with one that CAN syn my iPhone, but can NOT access the store.
Besides, with iTunes 10.5, the separately installed iCloud control panel app simply won't come up - I can click until I get blue in the face...
Obviously, for iCloud control panel, although it is only listed as "recommended", it seems it's actually "required" to have Outlook 2007 or 2010 - and I have Outlook 2003 and do NOT intend to switch to a higher MS Office package.
I got an appointment at the Apple Store nearby now for Wednesday noon - to revert my iPhone to iOS 4. Then I could at least go on using the iPhone until again the first apps won't support iOS 4 any longer, as it happened shortly after the launch of iOS 4 when iOS 3.1.3 wasn't supported any longer.
Oh, I forgot to mention - during the update/upgrade to iTunes 10.5 / iOS 5, the sync destroyed my recent backup and hung - the only way out was to kill the backup process and continue, which resulted in a "new", blank phone. Lost some years' app data and a lot of important bookmarks that way.
Needless to say that the iPhone was my last Apple product ...

Peter Hah
After spending another two days on pinning down the iTunes 10.5 blank store page problem, here's the solution to be found: https://discussions.apple.com/thread/3372617?start=0&tstart=0
Look out for "japiohelp".
In short:
a) press Windows key + "R", enter "cmd", and press Ctrl+Shift+Enter (= runs as admin)
b) enter "netsh winsock reset" and pres enter
c) reboot the computer
and Bob's your uncle.
P.

Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer

Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer, And when Installing network printers from the domain controller it reports it cannot connect to printer. I can ping all
network devices. I can connect to the internet.
On boot I get a netlogon 5719 error followed by service control manager errors 7023,7001 and a group policy error 1129.
Clients can connect to the remote application and RDP operates to connect to the server internally and externally.
The domain controller is another server 2008r2 box. I have scoured the internet but have not found any solutions that work yet.

Hi,
After referring to your post, it can be identified that the issue which you are facing is mostly due to some network issue in your environment. Please recheck your network connection issue between computer and domain controller.
Can you able to ping with IP address and also with fully qualified name of a domain controller in the users' and computers' domain. If it fails states that name resolution issue with computer and domain controller. Are you using MS DHCP Relay agent then there’s
available Hotfix for the particular Event ID. Please go through this KB 2459530 to fix the error event ID.
As per the net logon error 5719 which you are facing states that the client component of Netlogon was unable to locate a DC for the domain it was trying to perform an operation against. Below is one of the reason. If this is being logged on a DC and the event
refers to the DC's own domain, something might be preventing the client component of Netlogon from starting a network session (to itself or to another DC in the domain). The following event 7001 & 7023 states start & stop operation service. Please
go through beneath article for more details.
1. Event ID 5719 is logged when you start a computer
2. Netlogon 5719 and the Disappearing Domain [Controller]
3. Event ID 1129 — Microsoft-Windows-GroupPolicy
Hope it helps!
Regards.

How do I fix my left shift key? Any open windows leave and make the desktop visible.

How do I fix my left shift key? Any open windows leave and make the desktop visible. I have tired to go into system preferences and reset all of the keyboard settings to default but the issue hasn't gone away.

You are not running as administrator, I think, which may be required and the only way to properly work and register. Also check for compatibility mode settings, UAC and DEP, all of which may require to be adjusted for a legacy app like PS CS2 to run properly. Also turn off Aero and switch to a conventional visual theme. The brush issue may be related to that or is a more generic problem with your graphics card and mouse config, but since you didn't provide any info on that, it will be hard for anyone to advise.
Mylenium

How could I turn off the Command Key to Windows Key mapping in Remote Desktop for Mac 8

I'd like to be able to turn the Command key->Windows key mapping off. In this new app, whenever I use the Command key to initiate a Mac-side function, it registers a press of the Windows key within the Remote Desktop session. Speaking only
for myself, I use the Command Key for quite a lot of Mac operations, while my need and expectation for a Windows key press is zero.

I'd like to be able to turn the Command key->Windows key mapping off. In this new app, whenever I use the Command key to initiate a Mac-side function, it registers a press of the Windows key within the Remote Desktop session. Speaking
only for myself, I use the Command Key for quite a lot of Mac operations, while my need and expectation for a Windows key press is zero.
Agreed. Cannot stop it by disabling the "Windows" key (from within Windows 7). Every time I Cmd-Tab to change apps, the Start Menu pops up,
and persists, overlaying other app windows. Much more than annoying.
Also, there is no Clipboard Sharing, apparently. Love typing in long binary strings into the Registry.

Windows Store should have a "Desktop App" or "Windows Store App" filters.

Hi all,
I don't know where to post this or how to feedback to the "Store" app.
My friends and I think Windows Store should have a "Desktop App" filter feature.
Thinking when you search for the app and have some Desktop apps appear in search result can be sometime frustrated.
Or some user just want to find some desktop app for his PC, he should search in Windows Store easily by just filter only desktop apps.
I think it would be a great feature for Windows Store.
Thanks.

Hello P.
when you have the Windows-10-Preview, you can use the feedback-function to provide the information to microsoft directly. As Microsoft meantioned in the live-Stream (21/01/2015), microsoft is giong to listen to users feedback.
© 2015 Thomas Roskop
Germany // Deutschland

Windows 7/32bit DELL T5500 Desktop shutdown by itself

Similar Messages

Maybe you are looking for