Windows 7 64-bit cannot find HP C5280 printer over network

I've had this working under the same conditions for several years, same computers, same printer, same network configuration. One day, my computer stopped being able to print to the network computer, coming back with errors. I uninstalled the printer and when I went to reinstall, it cannot locate the printer at all. Everyone else on the network can see and use the printer, I can see and access the computer that it's plugged into, but going through the add a printer wizard, even specifically going into that computer manually, it sees no printer.
I've run through the Microsoft Fixit, no results. I've run through the HP Network Troubleshooter, no results. I've rebooted all computers in question, no results. It's not a networking problem, as I said, because I can fully access every other computer on the network. The printer has been verified as shared and operable from every other computer on the network.
Ideas? Thanks.

Check that printer sharing is still enabled on the host computer. If it is, let's delete and re-add the printer on the host PC:
1. Unplug the printer's USB cable.
2. Go to Start > Control Panel > Devices and Printers and delete all instances of the printer.
3. Plug the printer USB cable back in and wait for the PC to re-add it.
4. Once it is re-added, right click the printer and enable/setup Printer Sharing.
Try again from the ohter PC(s).
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

Windows 7 64-bit cannot find Reader 11

Windows 7 64-bit pops up a message stating Adobe Reader 11 cannot be found. The program was operating fine. I have checked the file path, it's correct. I have given permissions in the registry, uninstalled, re-installed, all to no avail. All PDFs open with Foxit. I have also found that none of the CSS6 products will open.

There was a very similar problem earlier this month (http://forums.adobe.com/thread/1355293, in German), but we never found what caused it or how to fix it.
If I were to encounter this problem I would try a System Restore to a date when Reader still worked correctly.

HT201317 I have a PC with Windows Vista but I cannot find my photo stream anywhere. I followed the directions on the FAQ but it led me nowhere. What do I do?

I have a PC with Windows Vista but I cannot find my photo stream anywhere. I followed the directions on the FAQ but it led me nowhere. What do I do?

Well I linked to an article produced and hosted by Apple so I suppose if they have an issue with it the would have to spank themselves
In addition the US Supreme Court has ruled that making a copy of a DVD for personal use or as a backup is perfectly legal, we've been doing that with CDs for as long as it has been possible, same for video tapes.
What is illegal is breaking any DRM protection on the media (this holds true for all media not just DVDs) and actually even this is a bit murky. What is definitely illegal is to sell software to break DRM. However if you write your own DRM breaking software and use it to make personal copies or backups the law gets real gray.
So again as long as there is no DRM involved its OK, with DRM you're best to leave it alone.
regards

I bought PhotoShop 12.0 for Windows 8. I cannot find the Curves function in the program. Is Curves excluded from this version? If so, how can I upgrade to get Curves? Thank you!

I bought PhotoShop 12.0 for Windows 8. I cannot find the Curves function in the program. Is Curves excluded from this version? If so, how can I upgrade to get Curves? Thank you!

teddy27 a écrit:
Thank you, Michel, for your helpful answer. I have downloaded SmartCurve and saved the files in C:\program files\adobe\Photoshop elements\plug-ins. I re-started PhotoShop. Do I access SmartCurve to adjust curves from within PhotoShop?
You can acces it from the menu 'Filters', there is a line called 'Easy.Filter', click it and it shows 'Smartcurve'.
Separately, can I upgrade my PhotoShop Elements to Photoshop without signing up to the CC 'rental' system of monthly payments? Sincere thanks, Ted
I know that you don't need the CC 'rental' subscription to have Photoshop, but as far as I know, there is no upgrade path from Elements except periodical special offers.

Cannot find m1212nf multifunction printer driver to install on w/2008 terminal server (64bit).

Cannot find m1212nf multifunction printer driver to install on w/2008 terminal server (64bit). The existing driver wants me to connect the printer using USB. The printer is in another facility I am trying to support.

Hi,
The HP M1212nf used the Host-Based printing language, such printing language is not recommended Citrix or Terminal Services envoirnment and not officially supported.. you may try using the Citrix UPD on the server by installing the basic driver for yor printer on the client:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=3965849&task=&
(ii) HP does not recommend installing these host-based LaserJet drivers on the Citrix server; however, the devices may function by using the Citrix UPD on the Citrix server with the HP host-based driver installed on the client. Print drivers for your product may be available within the Windows 7 operating system.
http://support.citrix.com/servlet/KbServlet/download/10498-102-693211/Citrix%20Supported%20HP%20Prin...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Pls take note that my IPad 3 used to find my printer HP wireless D110. The only thing that I did was to update to IOS 7. Do you think this is the reason why my iPad cannot find my wireless printer?

Pls take note that my IPad 3 used to find my printer HP wireless D110. The only thing that I did was to update to IOS 7. Do you think this is the reason why my iPad cannot find my wireless printer?

1. Turn the router, iPad and printer off
2. Turn on the router and then wait 30 seconds
3. Turn on printer and then wait 30 seconds
4. Turn on your iPad and test print.

Having a problem with wireless connection. On my Windows XP 32 bit system and a 6510 printer, initi

On my Dell Latitude D620, Windows XP 32 bit system and my 6510 printer wireless connection (Linksys EA4500) , everything works fine after the computer is booted. After a period of time (usually overnight), I lose connection to the printer (the scanner icon with a red x is shown on my Windows task bar and I can't print. Ran Windows Fix and the HP fix programs. The only thing that solves it is to reboot the computer. A second symptom is that my IE8 stops connecting to the internet at the same time (gives a 'waiting for' response that never changes). Firefox still connects OK when this is happening. So I suspect the problem isn't with the printer, but with my Windows set up. It is a fresh XP SP3 install (hard drive crashed, but it happened before also). I reset IE, checked my proxy, no malware, happens with or without firewalls and security programs.
Hoping that someone else has run into this problem. Been all over Google, and the IE doesn't work / Firefox works is fairly common, but none of the fixes helps.

If you want you can reload Firefox 4.0 or the last "old" version is 3.6.16 and is available here:
http://www.mozilla.com/en-US/firefox/all-older.html
Just reinstall your choice of FF. The bookmarks are in a different directory and are NOT overwritten. Some of the Add-ons that worked in 3.6 DO NOT work with 4.0, pay attention and head any warnings when you start 4.0.
I had to disable extensions: Flashblock and WOT
Firefox SafeMode? - A troubleshooting mode.
1.You can open the Firefox 4.0 SafeMode by holding the Shft key when you use the Firefox desktop or Start menu shortcut.
To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.
For more help, see this: http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
Hope this helps you out.
Feedback is appreciated especially if this helps you out.

HT4527 I have an iphone4 and a new computer with Windows 8. I cannot find the button to transfer my purchases, can anyone help?

I just purchased a new computer with Windows 8. I currently have an IPhone4. I have installed itunes on the computer and authorized it, but I cannot find the button to transfer the purchases from my phone to my computer. Any help would be appreciated. I tried to follow the instructions from support but could not find "transfer purchases" anywhere.

File>Devices>Transfer Purchases

I have purchased Priemier Elements 12 for Windows and Mac. I need to download Pre 12 for my new Window 8. I cannot find any Adobe products I have purchased in my account. Please help, I don't have a backup CD.

I have purchased Premiere Element 12 for Windows and mac. I cannot find any Adobe products I purchased so I can download Pre 12 to my new Windows computer.

Hi,
Please use this link for downloading premiere elements 12 on windows.
http://www.adobe.com/cfusion/tdrc/index.cfm?product=premiere_elements&loc=us
Thank You
Arjun

I am using Windows 7, creative Cloud, cannot find Acrobat to launch or uninstall,

I am using Windows 7 and on Creative Cloud, cannot find Acrobat XI to launch or uninstall, AAM says it is "Up To Date"

So you do not have it in
Control Panel | Programs and Features | Adobe Acrobat XI Pro ?
Start | All Programs | Adobe Acrobat XI Pro ?
C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe ?

Windows XP Toshiba laptop cannot find airport express

Hi,
I'm experiencing the same problems (so i've read) many others have.
My Xp laptop cannot find the base station of airport express, while my macbook has no problems.
I've tried some of the possible solutions mentioned on this forum, but nothing seems to work for me.
- i can't fill in a correct ip adress in the airport aid program XP (don't know if this is important)
- and I don't know where i can find the "channel change" option on my xp laptop.
I have tried to change the channel to 1 at my macbook wich resulted in having to reinstall ax cause it also couldn't be found on my mac book after this change
Long story, but i hope someone can help me!
Kind regards,
Sonja.

Do you have access to the Airport Admin Utility? It should be Start ->Airport -> Airport Admin Utility.
If you have this, and it should be there is you have loaded the AX software, you will see the AX Base Station in the window. Click on it. You will be asked for a password: the default is "Public" (without the quotation marks). Once you have entered the program, you will see a series of tabs across the top of the page. The Airport Tab will give you access to the information that you need to change (e.g., channel, etc.).
Remember that some Toshiba Laptops have a physical switch that must be turned on in order for wireless to be used. Mine is just underneath the left-hand side at the front of the unit.
If you purchased your AX in Europe, then you can go all the way up to Channel 13 ... Channel 11 appears to be the maximum in North America.

Windows 7 64 bit cannot wakeup

Just setup the windows 7 64 bit with bootcamp on my mac mini. Updated to the latest bootcamp 3.1 64 bit as well. I set the configuration so when I press the button on the back of my mac mini, it should go hibernate. But I found out that I am not able to wake it up. I was able to do it when I was using windows 7 32 bit.

Hibernate can be touchy / iffy and it may be there is no way; or there is something else that is affecting sleep, reduced power management etc.
Have you gone into and tried tweaking the Power Options?

How to install Windows 7 64 bit driver for Canon i9100 Printer?

When I try to install my Canon i9100 printer on my HP laptop running Windows 7 Professional 64 bit, Windows cannot locate a driver. Visiting the Canon website, I find an update module for the Windows driver. Canon says the printer MUST be installed using Windows Updater before their driver update can be installed. I have tried everything, but I cannot get Windows to find a driver. Windows Updater says that my computer is Up To Date.
What am I doing wrong?
Thank you,
David

Hi Honeycutt,
The Windows 7 driver for your i9100 is only available from Microsoft through Windows Update. Please try Microsoft's web page for assistance with troubleshooting this:
http://windows.microsoft.com/en-us/windows7/find-and-install-printer-drivers
If you continue to have difficulties, please contact our support group using the following link:
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

My iPhone cannot find my AirPrint printer HP Photosmart 7525. What do I do?

My iPhone and iPad cannot find any AirPrint Printers. MY HYP Photosmart 7525 is AirPrint compatible, what can I do?

Hey kennethfrommascoutah,
Thanks for using Apple Support Communities.
Since you are having trouble using AirPrint follow this section of the article.
About AirPrint
http://support.apple.com/kb/ht4356
If you're unable to print
Check these things if you are unable to print, or if you see the message "No AirPrint Printers Found."
Make sure your printer has paper, and enough ink or toner installed.
Make sure your printer is connected to the same Wi-Fi network as your iOS device.
Make sure your printer has power and is turned on. Try turning your printer off and then back on again to see if it resolves your issue.
Check to see if your printer has any error lights or indicators displayed on the printer's control panel. Check the documentation that came with your printer to clear any errors displayed.
Check with your printer's manufacturer to see if any firmware updates are available for your printer. Check your printer's documentation or contact the printer vendor for more information. A firmware update may be available, even if you just bought your printer.
Have a nice day,
Mario

Windows 7 64-bit & HP LaserJet M1005 MFP Printing problem

I have installed the latest available drivers (as of 26rd October 09) for HP LJ M1005 MFP printer
on Windows 7 64-bit Enterprise. Printer connected over USB.
I can't print more than two pages from any application.
It stop printing after two pages and have a message on LED "Printing Document".
Nothing is in the print queue.
Printer well working on WinXP, Win2003, Win2008 x64.
Anyone else have this problem? Or even a solution?
Sorry for my bad English.

I retried the installation from the driver after having cleaned previous installation and having unplugged the printer.
Same problem re-occured
Here the log containing the error
EDC): _PostProgressMessage hWnd=0x60206 msg=1125, param=13074
[11-19-2009 8:22:39:391]- LOG(EDC): Preinstalling inf C:\Users\Admin\AppData\Local\Temp\7zS58EC\HPLJM1005.INF
[11-19-2009 8:22:39:391]- LOG(820): IDLCProgressDlg:nCurrentProgressMsg()
[11-19-2009 8:22:39:391]- LOG(820): msg=Preinstalling the driver files ...
[11-19-2009 8:22:41:216]- LOG(EDC): SetupCopyOEMInf failed gle=2
[11-19-2009 8:22:41:216]- LOG(EDC): PreInstallDriverFiles()
[11-19-2009 8:22:41:216]- LOG(EDC): _PreInstallDriverFiles()
[11-19-2009 8:22:41:216]- LOG(EDC): inf:C:\Users\Admin\AppData\Local\Temp\7zS58EC\HPLJM1005.INF
[11-19-2009 8:22:42:761]- LOG(EDC): DriverPackagePreinstall = -536870141, flags=0x14
[11-19-2009 8:22:42:761]- LOG(EDC): ===>>> ERROR (gle=-2146499837, 0xe0000303): Msg: (null) Context: DriverPackagePreinstall failed
[11-19-2009 8:22:43:775]- LOG(EDC): _PreInstallDriverFiles()
[11-19-2009 8:22:43:775]- LOG(EDC): inf:C:\Users\Admin\AppData\Local\Temp\7zS58EC\HPLJM1005.INF
[11-19-2009 8:22:45:194]- LOG(EDC): DriverPackagePreinstall = -536870141, flags=0x14
[11-19-2009 8:22:45:194]- LOG(EDC): ===>>> ERROR (gle=-2146499837, 0xe0000303): Msg: (null) Context: DriverPackagePreinstall failed
[11-19-2009 8:22:45:194]- LOG(EDC): Diffx Preinstall FAILED, trying SetupCopyOEMInf: C:\Users\Admin\AppData\Local\Temp\7zS58EC\HPLJM1005.INF
[11-19-2009 8:22:45:194]- LOG(EDC): ProcessFailure(3) NEXT=0, BACK=1, CANCELED=2, FAILED=3
[11-19-2009 8:22:45:194]- LOG(EDC): _PostProgressMessage hWnd=0x60206 msg=1129, param=0
[11-19-2009 8:22:45:210]- LOG(EDC): InstallSequencer() step = 4
[11-19-2009 8:22:45:210]- LOG(820): IDLCProgressDlg:nStopCurrentProgress()
[11-19-2009 8:22:45:210]- LOG(EDC): --- PreInstallStep ---
After that he retries to install the driver, but inside the previous install directory.

Windows 7 64-bit cannot find HP C5280 printer over network

Similar Messages

Maybe you are looking for