Windows 8.1 error/crash: DRIVER_IRQL_NOT_LESS_OR_EQUAL
I've been getting a bunch of errors and automatic restarts. This was the most recent one.
https://onedrive.live.com/redir?resid=ABF6FF188301339%21111
here are my dump files. There are only three. I don't know if this link will work I've never used skydrive.
Even though it says my system is 64 bit all of my tasks in the task manager say 32 bit and for some reason "Windows Explorer (32 bit)" has been taking up a lot of CPU even when I am doing nothing on my laptop. This has all been happening recently.
My laptop was fine a couple of days ago now the fan seems overworked and I keep getting these crashes. Any help would be appreciated.
The link worked great.
There were two errors reported a DRIVER_POWER_STATE_FAILURE (9f) and a DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1) error.
The DRIVER_IRQL_NOT_LESS_OR_EQUAL error referenced the igdkmd64.sys which is the Intel display driver.
The DRIVER_POWER_STATE_FAILURE error appears to be related to USB and may be caused by the webcam driver, the rtsuvc.sys:
BUCKET_ID: AV_igdkmd64+63287
BUCKET_ID: 0x9F_3_POWER_DOWN_IMAGE_usbccgp.sys
kd> !devstack ffffe0008372c8e0
!DevObj !DrvObj !DevExt ObjectName
ffffe000837a3330 \Driver\ksthunk ffffe000837a3480 InfoMask field not found for _OBJECT_HEADER at ffffe000837a3300
ffffe000837a93c0 Unable to load image \SystemRoot\system32\DRIVERS\rtsuvc.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for rtsuvc.sys
*** ERROR: Module load completed but symbols could not be loaded for
rtsuvc.sys
\Driver\rtsuvc ffffe000837a9530 InfoMask field not found for _OBJECT_HEADER at ffffe000837a9390
ffffe0008376c2c0 \Driver\ACPI ffffe0007ea55910 InfoMask field not found for _OBJECT_HEADER at ffffe0008376c290
> ffffe0008372c8e0 \Driver\usbccgp ffffe0008372ca30 Cannot read info offset from nt!ObpInfoMaskToOffset
!DevNode ffffe0008374ac50 :
DeviceInst is "USB\VID_174F&PID_1474&MI_00\6&257cec3c&0&0000"
ServiceName is "rtsuvc"
The issue(s) appear to be similar to that reported in the following link and may be inherent to the Y510P:
http://www.eightforums.com/bsod-crashes-debugging/43242-bsod-while-chrome-driver_power_state_failure.html
You could try updating the camera driver or roll back to a previous stable version or disable the camera in the Device Manager.
Also, update the Intel graphics driver, you can try the following utility from Intel to check for driver updates:
http://www.intel.com/p/en_US/support/detect
I might also suggest to uninstall, at least temporarily, Avast and use just Windows 8.1 built-in antivirus (Windows Defender) and firewall.
Also, uninstall Daemon Tools as the dtscsibus.sys driver may be problematic.
Similar Messages
-
Hi,
I bought a new computer with Windows 8 Pro (64 Bit) in February/March 2013 and it has crashed almost every day I've had it (it crashes at least every two days). Despite constantly sending the details of the crash through to Microsoft it doesn't seems
to have been addressed. The error message that pops up every time is the same. It is on a blue screen and says:
"Your computer has encountered an error and needs to restart :(
DRIVER_IRQL_NOT_LESS_OR_EQUAL (tcpip.sys)"
Can someone please explain what I need to do to fix this? I am not a tech head so some step by step instructions would be great. Can i (re)install new drivers etc or is this a common fault of Windows 8? This is driving me crazy. It
certainly doesn't make me feel like I have a new computer that's for sure!
I just read one post that suggested someone's fault ma be because of antivirus software AVG Internet Security 2013 (which I have). How can I find out iof this is the case? And if this software doesn't work with Windows 8 does anyone know
what is the best to use with Windows 8?
Any help would be massively appreciated.
Cheers,
rdtro1* Bugcheck Analysis *
DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88001b83e58, address which referenced memory
Debugging Details:
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800197d7168
GetUlongFromAddress: unable to read from fffff800197d71f8
0000000000000000 Nonpaged pool
CURRENT_IRQL: 2
FAULTING_IP:
tcpip!FlpReturnNetBufferListChain+e2738
fffff880`01b83e58 488b01 mov rax,qword ptr [rcx]
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: AV
PROCESS_NAME: System
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
TRAP_FRAME: fffff88002b38880 -- (.trap 0xfffff88002b38880)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffffa8004f6fc40 rbx=0000000000000000 rcx=0000000000000000
rdx=fffffa8004f6fc41 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88001b83e58 rsp=fffff88002b38a10 rbp=0000000000000000
r8=fffffa8004f6fc40 r9=0000000000000000 r10=fffff88001400e80
r11=fffffa80061113d0 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz na pe nc
tcpip!FlpReturnNetBufferListChain+0xe2738:
fffff880`01b83e58 488b01 mov rax,qword ptr [rcx] ds:00000000`00000000=????????????????
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff800194d8769 to fffff800194d9440
STACK_TEXT:
00 nt!KeBugCheckEx
01 nt!KiBugCheckDispatch
02 nt!KiPageFault
03 tcpip!FlpReturnNetBufferListChain
04 NETIO!NetioDereferenceNetBufferList
05 fwpkclnt!FwppDereferenceNetioNetBufferList
06 fwpkclnt!FwpsDereferenceNetBufferList0
07 tunnel!TunnelUserRestoreAndFreeNblAndNbState
08 tunnel!TunnelUserReturnNetBufferLists
09 ndis!ndisInvokeNextReceiveCompleteHandler
0a ndis!NdisReturnNetBufferLists
0b tcpip!FlpReturnNetBufferListChain
0c NETIO!NetioDereferenceNetBufferListChain
0d tcpip!TcpFlushDelay
0e tcpip!TcpPreValidatedReceive
0f tcpip!IppDeliverListToProtocol
10 tcpip!IppProcessDeliverList
11 tcpip!IppReceiveHeaderBatch
12 tcpip!IpFlcReceivePackets
13 tcpip!FlpReceiveNonPreValidatedNetBufferListChain
14 tcpip!FlReceiveNetBufferListChainCalloutRoutine
15 nt!KeExpandKernelStackAndCalloutInternal
16 nt!KeExpandKernelStackAndCalloutEx
17 tcpip!FlReceiveNetBufferListChain
18 ndis!ndisMIndicateNetBufferListsToOpen
19 ndis!ndisInvokeNextReceiveHandler
1a ndis!NdisMIndicateReceiveNetBufferLists
1b tunnel!TeredoWfpIndicationWorker
1c tunnel!LwWorker
1d nt!IopProcessWorkItem
1e nt!ExpWorkerThread
1f nt!PspSystemThreadStartup
20 nt!KiStartSystemThread
Image path: \SystemRoot\system32\DRIVERS\tunnel.sys
Image name: tunnel.sys
Browse all global symbols functions data
Timestamp: Thu Jul 26 04:23:04 2012 (5010AA08)
CheckSum: 000296F2
ImageSize: 0002C000
File version: 6.2.9200.16384
Product version: 6.2.9200.16384
File flags: 0 (Mask 3F)
File OS: 40004 NT Win32
File type: 3.6 Driver
File date: 00000000.00000000
Translations: 0409.04b0
CompanyName: Microsoft Corporation
ProductName: Microsoft® Windows® Operating System
InternalName: tunnel.sys
OriginalFilename: tunnel.sys
ProductVersion: 6.2.9200.16384
FileVersion: 6.2.9200.16384 (win8_rtm.120725-1247)
FileDescription: Microsoft Tunnel Interface Driver
LegalCopyright: © Microsoft Corporation. All rights reserved.
Disable the Teredo Tunneling Pseudo-interface 6to4 Adapter
How to Disable Teredo Tunneling Pseudo-interface 6to4 Adapter
http://blogs.msdn.com/b/richin/archive/2010/11/26/how-to-disable-teredo-tunneling-pseudo-interface-6to4-adapter.aspx
Does this fix it?
"A programmer is just a tool which converts caffeine into code" -
Hi,
I bought a new computer with Windows 8 (64 Bit) in April/May 2013 and it has recently started crashing within the last week. The error message that pops up every time is the same. It is on a blue screen and says:
"Your computer has encountered an error and needs to restart :(
DRIVER_IRQL_NOT_LESS_OR_EQUAL (NETIO.SYS)"
Can someone please explain what I need to do to fix this?
I've read that it can be antiviruses such as Avast, however I am currently running Vipre. (I have Avira installed still, but disabled while I complete the trial of Vipre)
Any help would be *greatly* appreciated!
Thank you!CH
These were Related to NETwew00.sys Intel® Wireless WiFi Link Driver from Intel Corporation. I would install the newest driver available.
2: kd>
Irp is active with 5 stacks 3 is current (= 0xffffe0000af33ce0)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 0 ffffe0000221a050 00000000 00000000-00000000
Unable to load image \SystemRoot\system32\DRIVERS\NETwew00.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for NETwew00.sys
*** ERROR: Module load completed but symbols could not be loaded for NETwew00.sys
\Driver\NETwNe64
Args: 00014400 00000000 00000004 00000002
[ 16, 2] 0 e1 ffffe00001a01e20 00000000 fffff8009dbd6054-ffffe0000b5e7b10 Success Error Cancel pending
\Driver\vwifibus nt!PopSystemIrpCompletion
Args: 00014400 00000000 00000004 00000002
[ 0, 0] 0 0 00000000 00000000 00000000-ffffe0000b5e7b10
Args: 00000000 00000000 00000000 00000000
Wanikiya and Dyami--Team Zigzag -
Windows 8 error/crash: DRIVER_IRQL_NOT_LESS_OR_EQUAL
Hi,
I bought a new computer with Windows 8 and it has crashed almost every day . Despite constantly sending the details of the crash through to Microsoft it doesn't seems to have been addressed. The error message that pops up every time is the
same. It is on a blue screen and says:
"Your computer has encountered an error and needs to restart :(
DRIVER_IRQL_NOT_LESS_OR_EQUAL (tcpip.sys)"
Can someone please explain what I need to do to fix this? I am not a tech head so some step by step instructions would be great. Can i (re)install new drivers etc or is this a common fault of Windows 8? This is driving me crazy. It certainly
doesn't make me feel like I have a new computer that's for sure!
minidump link --> https://onedrive.live.com/redir?resid=883C8D9112CF51%21107
Any help would be massively appreciated.
Cheers,Hi
Your wifi or network adapter driver might need updating. -
Hello,
I have a problem with my Windows 8 Pro. This is the message i've got when BSOD appear:
"Your computer has encountered an error and needs to restart :(
DRIVER_IRQL_NOT_LESS_OR_EQUAL"
Please help me fix this thing.
This is my DMP file:
http://1drv.ms/TEe6I9
Thank youKikygeboy
Your Kaspersky is killing tcpip.sys. I would remove it and use the built in defender
Microsoft (R) Windows Debugger Version 6.3.9600.17029 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Ken\Desktop\062714-22620-01 - Copy.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
OK C:\Users\Ken\Desktop
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: C:\Users\Ken\Desktop
Windows 8 Kernel Version 9200 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9200.16384.amd64fre.win8_rtm.120725-1247
Machine Name:
Kernel base = 0xfffff800`30c00000 PsLoadedModuleList = 0xfffff800`30ecaa60
Debug session time: Fri Jun 27 11:59:00.441 2014 (UTC - 4:00)
System Uptime: 0 days 0:15:40.484
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck D1, {0, 2, 0, fffff880023e6245}
*** WARNING: Unable to verify timestamp for klwfp.sys
*** ERROR: Module load completed but symbols could not be loaded for klwfp.sys
Probably caused by : NETIO.SYS ( NETIO!NetioDereferenceNetBufferList+cb )
Followup: MachineOwner
0: kd> !analyze -v
* Bugcheck Analysis *
DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff880023e6245, address which referenced memory
Debugging Details:
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80030f56168
GetUlongFromAddress: unable to read from fffff80030f561f8
0000000000000000 Nonpaged pool
CURRENT_IRQL: 2
FAULTING_IP:
tcpip! ?? ::FNODOBFM::`string'+4f7ca
fffff880`023e6245 488b01 mov rax,qword ptr [rcx]
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: AV
PROCESS_NAME: System
ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre
TRAP_FRAME: fffff880055d1250 -- (.trap 0xfffff880055d1250)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffffa8002679e40 rbx=0000000000000000 rcx=0000000000000000
rdx=fffffa8002679e41 rsi=0000000000000000 rdi=0000000000000000
rip=fffff880023e6245 rsp=fffff880055d13e0 rbp=0000000000000000
r8=fffffa8002679e40 r9=0000000000000000 r10=fffff80030ef6e80
r11=fffffa8002b596e0 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz na pe nc
tcpip! ?? ::FNODOBFM::`string'+0x4f7ca:
fffff880`023e6245 488b01 mov rax,qword ptr [rcx] ds:00000000`00000000=????????????????
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff80030c7a369 to fffff80030c7b040
STACK_TEXT:
fffff880`055d1108 fffff800`30c7a369 : 00000000`0000000a 00000000`00000000 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff880`055d1110 fffff800`30c78be0 : 00000000`00000000 fffffa80`02b59620 00000000`00000000 fffff880`055d1250 : nt!KiBugCheckDispatch+0x69
fffff880`055d1250 fffff880`023e6245 : fffffa80`00000000 00000000`000000b0 00000000`00000000 fffff880`024f2340 : nt!KiPageFault+0x260
fffff880`055d13e0 fffff880`020051eb : fffffa80`01b03030 00000000`00000001 00000000`00000000 00000000`00000000 : tcpip! ?? ::FNODOBFM::`string'+0x4f7ca
fffff880`055d1430 fffff880`02001414 : fffffa80`03bf6370 00000000`00000000 00000000`00000000 fffff880`022fb2a8 : NETIO!NetioDereferenceNetBufferList+0xcb
fffff880`055d14c0 fffff880`02300e05 : fffff880`02415b90 fffff880`02415b00 fffffa80`01b03030 fffff880`055d15f8 : NETIO!NetioDereferenceNetBufferListChain+0x2a4
fffff880`055d1590 fffff880`022fa4c4 : 00000000`00000293 fffffa80`025cd8a0 00000000`0000000f fffff880`02415b90 : tcpip!IppReceiveHeaderBatch+0x365
fffff880`055d16c0 fffff880`0237f2b8 : fffffa80`042186f0 00000000`00000000 00000000`00000001 00000000`00000001 : tcpip!IpFlcReceivePackets+0x8d4
fffff880`055d18e0 fffff880`024cdb35 : 00000000`00000002 00000000`00000010 fffff880`055d1be9 00000000`00000000 : tcpip!IppInspectInjectReceive+0x108
fffff880`055d1920 fffff800`30cbbdf5 : fffffa80`02a08860 fffffa80`02a08860 fffffa80`04978440 00000000`00000000 : fwpkclnt!FwppInjectionStackCallout+0xe5
fffff880`055d19b0 fffff800`30cbcd85 : fffff880`024cda50 fffff880`055d1b70 fffffa80`04978410 fffff880`05b64e98 : nt!KeExpandKernelStackAndCalloutInternal+0xe5
fffff880`055d1ab0 fffff880`024ceeb4 : 00000000`00000001 fffff880`055d1be9 fffffa80`03bf6370 fffffa80`01e20c00 : nt!KeExpandKernelStackAndCalloutEx+0x25
fffff880`055d1af0 fffff880`05b65037 : fffffa80`02a08860 fffffa80`04978440 fffffa80`0197a100 fffffa80`04978440 : fwpkclnt!FwpsInjectTransportReceiveAsync0+0x32c
fffff880`055d1c30 fffffa80`02a08860 : fffffa80`04978440 fffffa80`0197a100 fffffa80`04978440 fffffa80`018d0002 : klwfp+0x5037
fffff880`055d1c38 fffffa80`04978440 : fffffa80`0197a100 fffffa80`04978440 fffffa80`018d0002 fffff880`00000001 : 0xfffffa80`02a08860
fffff880`055d1c40 fffffa80`0197a100 : fffffa80`04978440 fffffa80`018d0002 fffff880`00000001 fffffa80`0000000d : 0xfffffa80`04978440
fffff880`055d1c48 fffffa80`04978440 : fffffa80`018d0002 fffff880`00000001 fffffa80`0000000d fffffa80`00000000 : 0xfffffa80`0197a100
fffff880`055d1c50 fffffa80`018d0002 : fffff880`00000001 fffffa80`0000000d fffffa80`00000000 fffffa80`00000000 : 0xfffffa80`04978440
fffff880`055d1c58 fffff880`00000001 : fffffa80`0000000d fffffa80`00000000 fffffa80`00000000 fffff880`05b64e98 : 0xfffffa80`018d0002
fffff880`055d1c60 fffffa80`0000000d : fffffa80`00000000 fffffa80`00000000 fffff880`05b64e98 fffffa80`04978440 : 0xfffff880`00000001
fffff880`055d1c68 fffffa80`00000000 : fffffa80`00000000 fffff880`05b64e98 fffffa80`04978440 fffff880`055d1c88 : 0xfffffa80`0000000d
fffff880`055d1c70 fffffa80`00000000 : fffff880`05b64e98 fffffa80`04978440 fffff880`055d1c88 00000000`00000000 : 0xfffffa80`00000000
fffff880`055d1c78 fffff880`05b64e98 : fffffa80`04978440 fffff880`055d1c88 00000000`00000000 fffff880`05b651f2 : 0xfffffa80`00000000
fffff880`055d1c80 fffffa80`04978440 : fffff880`055d1c88 00000000`00000000 fffff880`05b651f2 00000000`00000000 : klwfp+0x4e98
fffff880`055d1c88 fffff880`055d1c88 : 00000000`00000000 fffff880`05b651f2 00000000`00000000 fffffa80`04978440 : 0xfffffa80`04978440
fffff880`055d1c90 00000000`00000000 : fffff880`05b651f2 00000000`00000000 fffffa80`04978440 00000000`00000080 : 0xfffff880`055d1c88
STACK_COMMAND: kb
FOLLOWUP_IP:
NETIO!NetioDereferenceNetBufferList+cb
fffff880`020051eb 4885ff test rdi,rdi
SYMBOL_STACK_INDEX: 4
SYMBOL_NAME: NETIO!NetioDereferenceNetBufferList+cb
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: NETIO
IMAGE_NAME: NETIO.SYS
DEBUG_FLR_IMAGE_TIMESTAMP: 5010aa77
IMAGE_VERSION: 6.2.9200.16384
BUCKET_ID_FUNC_OFFSET: cb
FAILURE_BUCKET_ID: AV_NETIO!NetioDereferenceNetBufferList
BUCKET_ID: AV_NETIO!NetioDereferenceNetBufferList
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:av_netio!netiodereferencenetbufferlist
FAILURE_ID_HASH: {8ea7863c-0f95-6006-62d5-b7c1e5abd1d7}
Followup: MachineOwner
Wanikiya and Dyami--Team Zigzag -
plz.help me too. I bought my sony vaio laptop just a few days ago, and i updated it to windows 8.1 pro immediately. after that, it comes to crashes severals times a day . and here is my dump file:
hxxps://skydrive.live.com/embed?cid=A6DE62B43286857C&resid=A6DE62B43286857C%21533&authkey=AEU5UggEXk7kdcQ
My best guess is Thunder
-
Hi --
Today, I've started to experience bluescreens when running 3D games. The error says DRIVER_IRQL_NOT_LESS_OR_EQUAL. I'm running a 64 bit Windows 8.1.
Can someone tell me how to fix this and let me know what is wrong with my computer? I have a Minidump file uploaded to Onedrive. Please follow the link below. I cannot make it a hyperlink as my account is not yet verified, so copy and paste it.
https://onedrive.live.com/redir?resid=6078B8D3F4C70E85!106&authkey=!AL6m4fbdrcPdC8I&ithint=file%2czipEL
This was related to your Driver for Intel Graphics Adapter. I would remove the current driver and then install the newest driver available (yours is from 2013) and probably corrupt
Other old drivers needing updating
MBfilt64.sys 7/30/2009 10:40:32 PM
winio64.sys 6/3/2010 11:08:03 PM
SASKUTIL64.SYS 7/12/2011 4:00:01 PM
SASDIFSV64.SYS 7/21/2011 6:03:00 PM
NTIOLib_X64.sys 10/25/2012 5:27:58 AM
Microsoft (R) Windows Debugger Version 6.3.9600.17298 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Ken\Desktop\030715-26421-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*e:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*e:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 9600.17630.amd64fre.winblue_r7.150109-2022
Machine Name:
Kernel base = 0xfffff803`56810000 PsLoadedModuleList = 0xfffff803`56ae9250
Debug session time: Sat Mar 7 20:03:03.561 2015 (UTC - 5:00)
System Uptime: 4 days 23:50:53.286
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck D1, {0, 2, 1, fffff801b5528b5f}
*** WARNING: Unable to verify timestamp for igdkmd64.sys
*** ERROR: Module load completed but symbols could not be loaded for igdkmd64.sys
Probably caused by : igdkmd64.sys ( igdkmd64+b4b5f )
Followup: MachineOwner
1: kd> !analyze -v
* Bugcheck Analysis *
DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, value 0 = read operation, 1 = write operation
Arg4: fffff801b5528b5f, address which referenced memory
Debugging Details:
WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80356b73138
unable to get nt!MmNonPagedPoolStart
unable to get nt!MmSizeOfNonPagedPoolInBytes
0000000000000000
CURRENT_IRQL: 2
FAULTING_IP:
igdkmd64+b4b5f
fffff801`b5528b5f 488901 mov qword ptr [rcx],rax
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: AV
PROCESS_NAME: Vindictus.exe
ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) amd64fre
TRAP_FRAME: ffffd0006b6fcf30 -- (.trap 0xffffd0006b6fcf30)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=0000000000000000
rdx=ffffe0011ef127d0 rsi=0000000000000000 rdi=0000000000000000
rip=fffff801b5528b5f rsp=ffffd0006b6fd0c0 rbp=ffffd0006b6fd101
r8=ffffe0011ef2db40 r9=0000000000001000 r10=ffffd0006f001de0
r11=ffffd0006b6fd128 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz na po nc
igdkmd64+0xb4b5f:
fffff801`b5528b5f 488901 mov qword ptr [rcx],rax ds:00000000`00000000=????????????????
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff8035696c4e9 to fffff803569609a0
STACK_TEXT:
ffffd000`6b6fcde8 fffff803`5696c4e9 : 00000000`0000000a 00000000`00000000 00000000`00000002 00000000`00000001 : nt!KeBugCheckEx
ffffd000`6b6fcdf0 fffff803`5696ad3a : 00000000`00000001 ffffe001`1ef2db40 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
ffffd000`6b6fcf30 fffff801`b5528b5f : 00000000`00000000 ffffd000`6b6fd101 ffffe001`1fc87000 00000000`00000000 : nt!KiPageFault+0x23a
ffffd000`6b6fd0c0 00000000`00000000 : ffffd000`6b6fd101 ffffe001`1fc87000 00000000`00000000 00000000`00000000 : igdkmd64+0xb4b5f
STACK_COMMAND: kb
FOLLOWUP_IP:
igdkmd64+b4b5f
fffff801`b5528b5f 488901 mov qword ptr [rcx],rax
SYMBOL_STACK_INDEX: 3
SYMBOL_NAME: igdkmd64+b4b5f
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: igdkmd64
IMAGE_NAME: igdkmd64.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 52b20a48
FAILURE_BUCKET_ID: AV_igdkmd64+b4b5f
BUCKET_ID: AV_igdkmd64+b4b5f
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:av_igdkmd64+b4b5f
FAILURE_ID_HASH: {fcd16fe4-87dc-ccae-fe29-f4cb21371e64}
Followup: MachineOwner
Wanikiya and Dyami--Team Zigzag -
Windows 8 Pro (64 Bit) always error/crash when open uTorrent
Hey, i want to ask about my windows. Its always crash when i'm download from uTorrent. please help. this is the 3rd times :
This is my DMP file:
http://1drv.ms/1qk3Fmpkeknya konflik ama security softwarenya, coba uninstall antivirus lain selain MSE
I think there is software conflict with security software, please uninstall if there is any other antivirus other than MSE
FYI : we also have Indonesian language forum
http://social.technet.microsoft.com/Forums/id-id/home -
Windows prompting send error report or dont send
when am using labview application windows prompting send error report or dont send can some one help in this..I did all re installation and windows update but no use..
You will need to provide more details as we cannot see your computer screen. Does this happen every time you launch LabVIEW? What version of LabVIEW are you using? What version of Windows? Does LabVIEW crash? If so, what were you doing at the time it crashed?
-
Windows Visual C++ error (?)
I've been burning discs via ITunes for six months w/o issue. I recently started having a problem: After the cd burning finishes I get a quick audio blast followed by a 'Windows Visual C++' error tab on my bottom toolbar, and a rotating blue hourglass. This rotating hourglass does not go away unless I restart my pc. I have ITunes 7.5 installed. Any ideas? Thank you.
Could you please paste the whole error message here or check the event viewer to find error information about office and windows explorer?
Please keep you win7 up-to-date, you can also try
Start your computer in safe mode
http://windows.microsoft.com/en-in/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7
If you issue persists, refer to this link (reply posted by Andre), then upload the crash dump file here.
http://social.technet.microsoft.com/Forums/windows/en-US/88c1f21d-7c04-4c59-aed3-d98fa674dfe7/explorer-crash-restart?forum=w7itproui
Regards
Yolanda
TechNet Community Support -
After Effects CS5.5 error: crash in progress last logged message was 3300 DynamicLink 5
Randomly when I start after effects CS5.5 and premiere pro CS5.5 I get the following error:
After effects error: crash in progress last logged message was <3300> <DynamicLink> <5> 000000001AAB2080
I have all programs updated.
PC Specs:
i7 930 @ 2.8GHz
12GB RAM
Nvidia GTX 570
Windows 7 Proffesional 64bit
Thanks in advance guys!What does "randomly" mean? What do you do, when the issue appears? Do you run games before? Use other programs? Also check the Event Viewer for the exact cause...
Mylenium -
After Effects error: crash occurred while invoking effect plug-in "Looks" URGENT!
My name is Tyler and i'm a Mult-Media Editor in training. Just recently meaning just this project i've been getting this error "After Effects error: crash occurred while invoking effect plug-in “Looks”." every time i try to render. If i try to remove the clip where it messes up and replace it with another it will just mess up in another spot.
Screen Shot Here:http://gyazo.com/794429fd1091973c8a296a27d2af6fab.png
Information:
AE: After Effects CS5 (64-bit)
OS: Windows Home Premium (64-bit)
RAM: 8gb
Processor: 1st Gen. i7 Quad-Core
Graphics Card: NVIDIA GeForce GT 320
Updates: Installed All Updated For Adobe Products
Source Footage: Call Of Duty: Modern Warfare 2 @ 60fps using UT Video Codec YUV 420
Worked Before? Yes
Open GL: My open gl is not enabled
I've read other forums and watched tutorials. I've already done the following. (Not in order used)
1. Downgrade Magic Bullet Looks from 1.4.3 to 1.4.2 (Didn't Work)
2. Upgrade Magic Bullet Looks to MBL 2.0 from Magic Bullet Suite 11 (Didn't Work)
3. Uninstall my gfx card and re-install it with the newer version (Didn't Work)
4. Reset AE preferences by pressing alt+shift+ctrl on the shortcut (Didn't Work)
5. Change render settings from H.264 -> .AVI (Didn't Work)
6. I've deleted "AE_OpenGL" from my After Effects folder (Didn't Work)
My Composition:
http://gyazo.com/53c7a2789a752cfba7e908bed31d7c01.png
http://gyazo.com/da0cacaf4ef6d7e3276b6aa45b77da79.png
The look file is not that complex but i don't know if it'll help but there it is.
Look File Settings:
http://gyazo.com/25346bb318edadc54e09273977964c7d.png
I've never had this problem before and hope that someone has a solution to this problem... if so please post an answer. I don't know if its because i put the plug in on all of my clips and then made an adjustment layer with another Magic Bullet Looks or if it's my clips fault but i just dont know what to do.
-TylerIt sounds like Looks is only crashing on this project. If that is so then it's most likely a problem with one of your video clips. Either there's a corrupted frame or some other codec glitch that's throwing the errors. I'd suggest replacing footage items with temporary footage. You could even use solids. Replace one at a time, then undo, until you find the footage that's causing the crash. Then either re-compress that footage to another codec or replace it.
If Looks is crashing on every type of footage then you need to pursue other options that are more system related. -
Tell us about your computer hardware.
A:Here is my specs:
i-7 4770 motherboard
8 gb of Ram
What operating system?
A:Windows 7 64 bit OS
If you are getting error message(s), what is the full text of the error message(s)?
A:After Effects Error:Crash in progrss.Last logged message was:<8020><GPU manager>Sniffer Result Code:3
What were you doing when the problem occurred? What is the exact sequence of steps that you are taking?
A: Opened it and the error started@Todd_Kopriva
thank you very much it works now -
After Effects error: crash occurred while invoking plug-in Classic 3D
I am Adobe After Effects CS6 11.0.4 on a windows 7 64 bit PC with 16gb of ram. I encounter this error: crash occurred while invoking plug-in Classic 3D when rendering. There was a similar thread stating there exists a fix for this issue for After Effects CC 12.2.1 . That fix does not work for version 11.0.4 Does a similar fix exist for version 11.0.4? Or can we have this fix created for version 11.0.4?
The Adobe download site for AE shows that I am on the latest version. I also ran the check updates from AE. It also stated that I am on the latest version. (Adobe - After Effects : For Windows ) What is the latest version that you are referencing?
-
Hey so after reseting my Computer completly and installing windows again, i was trying to download the test version of after effects,
everything worked until i was trying to open After Effects
its says something likes this, btw this is not 100% perfectly translated..
"After Effects Error: "Crashed while processing" <7004> <GPU Manager> <2> Sniffer Result Code: 3
Uhm Yea i believe its because something is missing on my Computer like some sort of progamm like for example direct x or something like that!
After Effects worked on my PC before so its not my PC
i7 4770 gtx 770 16gb ram
Can anyone help? really desperate. =(Do your System properties look like this?
If so, we're going to need a lot more info. What GPU you have, for example. FAQ: What information should I provide?
Maybe you are looking for
-
How to fill the whole screen of my iMac with the photos I included in an iDVD project. (iDVD v. 7.1.2). I mean, during playing the burned dvd. When I do "Enter Full Screen", the slide show fills the screen but the photo itself remains in the middle w
-
Hi, I am going to reset my Macbook Pro to factory settings but I would like to back it up first. I have backed it up to an external Hard Drive so if I were to wipe the laptop, would i be able to retrieve all of my files and applications. (Office Mac,
-
Mailbox and public folder backup frequency
I appreciate this is very much organisation specific, but out of interest; 1) how often do you do full backups of your mailbox databases.. 2) how often do you do incremental backups of your mailbox database(s).. 3) how often do you do full backups of
-
Pkgfile rewritten in python with new feature
hi. I have made a rewrite of pkgfile from the pkgtools package in python to speed up search by using a sqlite db file. $ pkgfile -h Usage: pkgfile [ACTIONS] [OPTIONS] filename Options: --version show program's version number and exit -h, --help show
-
Converting RoboHelp project from v.4.1 to 8
I have problems with converting RoboHelp project created in RoboHelp Office for Word version 4.1 into RoboHelp for Word version 8. The project contains documents made in polish language. Project opens fine in new version of RoboHelp, but during help