Windows 8.1, secureboot and sleep issues

Hi,
I'm a technet subscriber so have access to Win8.1. Just tried it and ran into some issues which I think are bios related. (My motherboard is X79A-GD65 (8D) and I'm running bios 4.3.)
First when I installed Win8.1 a watermark is stuck on the desktop which says "SecureBoot isn't configured correctly" along with the build number, 9600.
So I went to bios and saw Windows 8 settings and enabled them, now the watermark is gone but there is not sleep option in windows (which I use alot)
going back to bios and disabling Win8 features brings sleep back but also the secureboot watermark......
Anyone else run into this?

I can't help with the SecureBoot issue. I have the same problem with my videocard not being SecureBoot compatible (A GTX 670). The sleep issue though, is it an issue with like... you can only hibernate, but you can't sleep? Windows 8 didn't come with that for me, but I found a work around.
Open a command prompt with administrator privilege and type: powercfg /hibernate off
This should change the hibernate to sleep.
If you want an icon for it just make a batch file: rundll32 powrprof.dll,SetSuspendState (0,1,0)
And if you need a timer on it (I use this pretty often myself) use this: powershell sleep <seconds> | rundll32 powrprof.dll SetSuspendState (0,1,0)
And if you're curious about the (0,1,0) thing. It's all boolean, so 1 or 0. (A,B,C), A: Hibernate, B: Critical (in XP/2003 it forces the sleep, but in newer versions it asks for permission to suspend), C: Disable wake event (Wake on LAN would be disabled if this were 1, for example).

Similar Messages

G700 Windows 8.1 Fastboot and sleep problem

Hello!
I have problem with Windows 8.1 and Lenovo G700:
1) Fastboot option not working properly...
2) System can't go sleep
I was looking for solution for this problems and found.... I have to disable all network interfaces in G700
(LAN and WLAN with Bluetooth) then fastboot and sleep options working fine.
I have a question about compatibility G700 and Windows 8.1?

I can't help with the SecureBoot issue. I have the same problem with my videocard not being SecureBoot compatible (A GTX 670). The sleep issue though, is it an issue with like... you can only hibernate, but you can't sleep? Windows 8 didn't come with that for me, but I found a work around.
Open a command prompt with administrator privilege and type: powercfg /hibernate off
This should change the hibernate to sleep.
If you want an icon for it just make a batch file: rundll32 powrprof.dll,SetSuspendState (0,1,0)
And if you need a timer on it (I use this pretty often myself) use this: powershell sleep <seconds> | rundll32 powrprof.dll SetSuspendState (0,1,0)
And if you're curious about the (0,1,0) thing. It's all boolean, so 1 or 0. (A,B,C), A: Hibernate, B: Critical (in XP/2003 it forces the sleep, but in newer versions it asks for permission to suspend), C: Disable wake event (Wake on LAN would be disabled if this were 1, for example).

Battery and Sleep issues. Is this "normal"?

Hey guys, ever since day 1 My new MBP has been experiencing the sleep issue where in sleep the battery would lose about 1-2%/hour. I would go to sleep with the battery at 100%, and wake up to only about 87%. Also, when it was new the battery had about 4650 for full charge capacity, now its showing only 4540 after 10 cycles!!! Is this normal? Please help my MBP is less than 2 weeks old I have owned the previous MBP model, and the battery life during sleep was considerably better than this, and also it took less time to charge the battery!
Charge Information:
Charge remaining (mAh): 3463
Fully charged: No
Charging: Yes
Full charge capacity (mAh): 4540
Health Information:
Cycle count: 10
Condition: Good
Battery Installed: Yes
Amperage (mA): 881
Voltage (mV): 12070
*I have also just updated the upgrade to 10.5.6. Will update and report if this will help with the sleep/battery issue.
Thanks for your help!
Message was edited by: Flyhighalwayz

Reset the SMC (System Management Controller) and re-calibrate the Battery then see how it behaves ...

Windows 8.1 Audio and Video issues

I recently updated Windows 8 to 8.1 on my 2012 MacBook Pro and it now appers that Headphone/Line In have stopped working.
This only occurs in Windows mode, when running in OS X Mavericks the issue does not occur so I am assuming that it is a driver related issue rather than hardware.
I also have an issue with dual monitor setup, if I attempt to change the resolution or go from Dual to Single then back again, it fails to locate the second monitor again. Once again, this all worked with no issue before the 8.1 update and no issue occurs while running OS X.
Has anyone else experienced these issues and/or know how to resolve them?
I have gone through device manager and it indicates that all drivers are up to date.

i too have the same issue. I did a fresh Bootcamp install of Windows 8.1 64-bit on my mid 2011 iMac and my built in audio and headphones have stopped working on the Windows side. OSX Maveriks is ok.
i also went to the device manager and all of my audio drivers are up to date...still no sound.
i have uninstalled and reinstalled all audio drivers, disabled then enabled them several times...still no sound.
i have unistalled the graphics driver (i read somewhere else that there was an issue with it)...but still no sound.
can someone help us out?
NOTE: i have a usb audio dongle that works on windows. but it only controls my headphones. when i plug in the headphones into the built in audio jack on the iMac it doesnt work.

Pavilion dv5 - 1217AX with Windows 8 - multiple booting and crashing issues

I have a Pavilion dv5 - 1217AX with Windows 8 operating system. It was upgraded from Vista to windows 8 last year and it worked really very well for about 1 year. Here are the issues I am facing these days
1. When powered on - Caps lock and Num lock LEDs keep flashing twice and the sequence keeps repeating - I checked the error code on some forums and it sounded like BIOS issue so I flashed the BIOS F38 again (SP46501) but it didn't help. I also thought it could be a memory issue so I removed the memory module and cleaned the slots and fixed the modules again but no luck. I also tried running the laptop using only one module, tried both the modules one by but no changes in error code. Then I thought it could be a toy bettery issue so replaced the toy batter that fits on the motherboard but no luck. I have also tried booting up removing the laptop battery pack but no luck.
So how does it boot now? - Once powered on I keep getting Caps lock Num lock LED flashing issues every time. Then I power off using power on/off button on laptop around 15 times or more then the laptop somehow boots up. There is no fixed pattern, sometimes it boots after 15 attempts, sometimes 50 attempts.
Whats happenes after booting? - Sometimes the screen goes completely blank without any error message on the screen. Sometimes Windows 8 crashes and laptop restarts, when it restarts I never see LED flashing issues (surprising). It crashes when I am watching some videos or playing some games, so looks like ATI Radeon driver issue (driver is 8.970.100.7000 for HD 3400 display card).
Let me know if there are any suggestion to fix the botting and crashing issues faced.

Hi Expertit ,
At first sight ,seems to be a boot issiu.Did you thry this?
Booting into the Windows 8 setup, select “Repair your computer” in the bottom part of the window, then “Troubleshoot” and “Advanced options”. Here I was given a good reminder of another cool Windows 8 feature. If you have a restore point created you can go back to that working copy of the OS without losing your data.
So the first thing you will want to try is the Automatic Repair.
If that fixes your boot problem, you had it easy and go on to create a restore point for another time you are out of luck. If Windows is unable to fix your issue, read on.
Go back to the Advanced options and choose the Command Prompt. Going for the next easiest way to fix the problem, enter the following four commands into the prompt:
bootrec /fixmbr
bootrec /fixboot
bootrec /scanos
bootrec /rebuildbcd
After receiving a success confirmation. Close the CMD window and restart your PC.
If you are booted into Windows, excellent! If not, let us know , so we can try some more solutions.
2.If your video crashes , it is probably wrong Catalyst settings.Right click on screen , open Catalyst control settings , set it to high (Radeon) performance.
Expecting your next post.
<<<-------***
**Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Wake up and sleep issues in Mac OS X 10.5.8

Hi,
Sometimes, after being sleeping for more than a day, when my macbook wakes up it suddenly sleeps by itself (after 15-45 seconds of using).
Usually I close the lid and wait 30 seconds. After this, I open the lid and the problem is solved. But, when it doesn’t happen I have to restart the computer (what is happenig more and more often). Does anyone know what is happening?
As I read in some posts, there are some bugs in Mac OS X 10.5.7 related with wake up and sleep problems. Does anyone know if these bugs remain in the 10.5.8 version? How is it possible to fix this problem?
Thanks,
Luiz Goldoni

Try a SMC reset.
DALE

Shutdown and Sleep Issues with Windows 8.1

My Acer desktop with Windows 8.1 has trouble shutting down at times, and has trouble sleeping. Can someone help me resolve this issue? Please! Help needed!

My mistake. I'd installed version 1.5, the updated version 1.8 (specifically mentions windows 8.1 on download link) works perfectly.

Flash drives and sleep issues

I'm not sure if this is a Tiger problem or a G4 issue, but I'll start here.
I plug 1Gb flash drives into an Adaptec FW+USB2 card in my Quicksilver running 10.4.11 and the computer will go to sleep fine. Read on.
With a SanDisk drive when I wake up the computer it gives me an error message about the drive not having been properly removed, but the computer does wake up and the drive icon is still present and the drive appears to be okay. Apart from having to click to remove the warning message nothing seems to be the problem. Okay, I can live with that.
I do the same thing with an Imation 1Gb flash drive and the computer will not wake up. I have to use the small reset button to reboot the computer.
Both drives are FAT16 format because I use them to regularly transfer files between the Quicksilver and a Windows machine. The only difference I notice between the drives is that when I use the Imation drive a file or folder or something named "EA" briefly appears in the Finder window where all the regular files are listed. There isn't any icon and there's nothing under date, size, or kind. If I click on the EA it disappears, but reappears each time I attach the drive.

Update and answer my own question.
I re-formatted the Imation drive as FAT16 (what is was already) using disk Utility and the strange file has disappeared. Must have been something to do with the factory formatting.
I also read that the only thing to do about Flash drives and post-sleep kernal panic is to make sure you disconnect the drive before sleep. Either that or get a card that will identify a flash drive as being attached and prevent sleep, or to disable sleep mode.

Problems with EFI Firmware Update to 1.5 for mid 2010 Mac Pro, and sleep issues

Hello to the community, I have run into an annoying issue.
I need to update the EFI firmware on my 8 core mid-2010 Mac Pro. I downloaded the EFI update from the apple website from here : http://support.apple.com/kb/DL1321
But everytime I download it, as I click to install, it gives me the message:
Alert
This software is not supported on your system.
But clearly this is the correct EFI for my computer. I tried burning the Firmware restoration onto a CD from here:
http://support.apple.com/kb/DL1320
But the computer did not respond the way it said it should (with the 3 flashes/beeps etc.) and have the optical drive open for the CD.
So I'm completely stuck.
*Also my Mac Pro had issues with sleep, when I put it to sleep, sometimes when I try to bring it back, it restarts itself, and other times, it just turns itself on and the monitor screen remains black, so I have to hit the power button to turn it off then back on again. This only happnens when the computer has been put to sleep for a slightly extended period of time, roughly 20mins +, sometimes longer. I was trying to solve this problem by first updating the firmware because I think it could be related to that, but I've had this problem with the firmware so I couldn't find out. This is actually the bigger problem for me because it will affect my work. I am currently using an iMac while I fix up this mac pro.
I'm a music composer so I've upgraded many aspects of my system due to work. I have a 1TB Samsung 840 evo SSD, 2 seagate 2 TB HDD, and 1 WD 1TB HD (the original one in the mac pro), along with 32 GB of RAM. So my only problems are the firmaware and the weird activity when the computer is put to sleep.
Some help would be greatly appreciated!
I'm running OS X Mavericks 10.9.2
mid-2010 Mac Pro
8 core processor (2 X 2.4gHz)

According to this article, your EFI firmware is up to date:
Computer
Model identifier
EFI Boot ROM version
SMC version
Mac Pro
Mac Pro (Late 2013)
MacPro6,1
MP61.0116.B04 (EFI 2.0)
2.20f18 (SMC 2.0)
Mac Pro (Mid 2010)
MacPro5,1
MP51.007F.B03 (EFI 1.5)
Mac Pro (Early 2009)
MacPro4,1
MP41.0081.B07 (EFI 1.4)
Mac Pro (Early 2008)
MacPro3,1
MP31.006C.B05 (EFI 1.3)
Mac Pro (8-core)
MacPro2,1
MP21.007F.B06 (EFI 1.2)
1.15f3 (SMC 1.1)
Mac Pro (Original)
MacPro1,1
MP11.005C.B08 (EFI 1.2)
1.7f10 (SMC 1.1)
EFI and SMC firmware updates for Intel-based Macs

Windows 8.1 Devices and Printers Issues

We have deployed a brand new Active Directory domain for a customer. ALL the servers without exception are Windows 2012 R2 and all clients are Windows 8.1 32bit VDI clients.
The issue that we have is around network printers.
We are deploying 4 printers from a Windows 2012 R2 Server via the print management/Deploy Printer and assigning that to a GPO. The printers are deployed to the Computers which should mean that the users get all 4 printers which they then should be
allowed to set their default and personal settings for that printer.
Our printers are deployed like this:
1. Created security group
2. Assigned VDI computers to the security group
3. Created GPO to reflect security group
4. Modify GPO to do security filtering based on computer group membership
5. Deployed 4 x printers through Print Management to the GPO on a per machine basis
However, on the users Devices and Printers screen we are not seeing the 4 printers. For some users they see duplicates of all 4 printers so e.g they can have upwards of 8 or more. Other users have no printers
displayed whatsoever. The next time they log off or restart they then have a different amount of printers displayed.
If they try and set the default then it will set and the next time they check the default may have moved to another printer even without logging off or back on.
Now, where this gets strange is within an application such as MS Word 2013 or Notepad if they use the file and print menu the printers will be listed, even if the user has no printers displayed in Devices and Printers. If the users selects a printer then
they can then print OK.
If we check HKCU\Printers||Connections then the CORRECT 4 printers are showing as to what is being deployed via the GPO so I know that the Windows 8.1 terminals are receiving the correct printers from the GPO.
To try and correct this over the course of the week we have deployed the printers via Group Policy Preferences to the user and then the PC to no avail. Currently we are using the Print management\Deployed Printers to deploy all 4 printers to the computer
via the Computer GPO.
I believe that this issue is related to the display somehow in Devices and Printers rather than a GPO or print server issue as we can see via the registry the clients are receiving the 4 correct mentioned printers as shown in the registry.
FYI: We only have around 30 users and all users are getting this problem. All users are receiving the same GPO's and have the same few apps installed, Office 2013, Adobe Reader etc.
What we want is for the computers to receive all 4 printers. All users should be able to use all 4 printers but the user should be able to select their particular default, depending where they are located or what they are printing that particular day. Their
particular default should persist after reboot. (We have 2 x Copiers and 2 x HP Laserjets) All users have redirected documents and desktop but the rest of the profile is on the VDI and persists after their reboot. The profile is not roaming as the user is
assigned a particular VDI.
After a week of scratching our heads with this we are open to suggestions and any would be appreciated. We have tried following the issues on this thread to no avail either as they still return.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/71d06204-3735-4473-8bc9-20be9e19090e/problem-with-multiple-instances-of-shared-printers-being-installed-on-client-computers-when-the?forum=winserverprint
many thanks

Hi,
It's strange thing on your client PC. You may ask the GP support engineer to know more.
Support link for GPO:
http://social.technet.microsoft.com/Forums/en-US/home?forum=winserverGP
On my side, I would like you to try following alternative suggestions:
Try Net use command to map the network printer
Use GPO to deploy the map script
How Can I Add a Network Printer at Logon and, Optionally, Make That the Default Printer?
http://blogs.technet.com/b/heyscriptingguy/archive/2006/12/12/how-can-i-add-a-network-printer-at-logon-and-optionally-make-that-the-default-printer.aspx
Hope it could be helpful.
Kate Li
TechNet Community Support

Startup and Sleep Issues 2.2 GHz, 10.6.6

First, the specs: 2.2 GHz Macbook Pro, 4Gb installed memory. Currently running OSX 10.6.6.
Symptoms:
1: On startup, wait time from grey "Apple" loading screen to blue pre-login window screen is approx 2 minutes, then approx. 8 additional minutes for the login window to appear.
2: If computer goes to sleep, it is unable to wake (put into sleep mode via closing, shortcut form apple menu, and optcmdejct). Instead screen remains black and front status light goes to a solidly lit but dimmed more than usual.
What I've tried:
Full archive and install of 10.6, repair permissions, repair disk (from 10.6 install book disk utility), hardware test (short and extended from original OS disk), Single user fsck, PRAM and SMC resets. Still nothing. I've looked at logs and removed any application that seemed to be hanging up at startup. I'm totally lost on this, and am now unfortunatly past apple care by about 4 months. Any advice at all would be VERY VERY APPRECIATED! I'll post my most recent startup log below.
-Colin
LOG:
3/13/11 8:58:39 PM com.apple.launchd[1] * launchd[1] has started up. *
3/13/11 8:59:08 PM com.parallels.desktop.launchdaemon[60] 2011-03-13 20:59:08.707 sw_vers[65:903] _CFGetHostUUIDString: unable to determine UUID for host. Error: 35
3/13/11 8:59:09 PM org.apache.httpd[31] httpd: Could not reliably determine the server's fully qualified domain name, using colin-mac.local for ServerName
3/13/11 8:59:10 PM com.apple.launchd[1] (com.apple.aslmanager) Throttling respawn: Will start in 9 seconds
3/13/11 8:59:14 PM com.parallels.desktop.launchdaemon[60] objc[67]: Class QMacSoundDelegate is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 8:59:14 PM com.parallels.desktop.launchdaemon[60] objc[67]: Class QNSMenu is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 8:59:14 PM com.parallels.desktop.launchdaemon[60] objc[67]: Class QNSStatusItem is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 8:59:14 PM com.parallels.desktop.launchdaemon[60] objc[67]: Class QNSImageView is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 8:59:14 PM com.parallels.desktop.launchdaemon[60] 2011-03-13 20:59:14.889 prlclientapp[67:1a03] _CFGetHostUUIDString: unable to determine UUID for host. Error: 35
3/13/11 8:59:20 PM com.apple.launchd[1] (com.apple.aslmanager) Throttling respawn: Will start in 9 seconds
3/13/11 8:59:21 PM com.parallels.desktop.launchdaemon[60] 2011-03-13 20:59:21.702 prlnetstart[131:903] _CFGetHostUUIDString: unable to determine UUID for host. Error: 35
3/13/11 8:59:23 PM com.apple.launchd[1] (com.parallels.vm.prl_naptd) Unknown key for boolean: SuccessfulExit
3/13/11 8:59:24 PM com.parallels.desktop.launchdaemon[60] Configuring en4...
3/13/11 8:59:24 PM com.parallels.desktop.launchdaemon[60] No System Preferences changes required.
3/13/11 8:59:24 PM com.parallels.desktop.launchdaemon[60] Configuring en5...
3/13/11 8:59:24 PM com.parallels.desktop.launchdaemon[60] No System Preferences changes required.
3/13/11 9:00:14 PM com.apple.WindowServer[93] Sun Mar 13 21:00:14 colin-mac.local WindowServer[93] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
3/13/11 9:00:26 PM com.apple.launchd[1] (com.apple.aslmanager) Throttling respawn: Will start in 8 seconds
3/13/11 9:08:35 PM com.apple.launchd[1] (com.apple.aslmanager) Throttling respawn: Will start in 10 seconds
3/13/11 9:08:40 PM com.apple.UserEventAgent-LoginWindow[180] ALF error: cannot find useragent 1102
3/13/11 9:08:40 PM com.apple.UserEventAgent-LoginWindow[180] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
3/13/11 9:08:40 PM com.apple.launchd[1] (com.wacom.wacomtablet[184]) Exited with exit code: 255
3/13/11 9:08:40 PM com.apple.launchd.peruser.502[199] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
3/13/11 9:08:49 PM com.parallels.desktop.client.launch[226] objc[226]: Class QMacSoundDelegate is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 9:08:49 PM com.parallels.desktop.client.launch[226] objc[226]: Class QNSMenu is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 9:08:49 PM com.parallels.desktop.client.launch[226] objc[226]: Class QNSStatusItem is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 9:08:49 PM com.parallels.desktop.client.launch[226] objc[226]: Class QNSImageView is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 9:08:50 PM com.apple.launchd.peruser.502[199] (com.apple.Kerberos.renew.plist[222]) Exited with exit code: 1
3/13/11 9:08:57 PM apsd-ft[240] APS daemon launched
3/13/11 9:08:58 PM apsd-ft[240] Successfully got client identity
3/13/11 9:09:08 PM com.apple.SystemStarter[36] PACESupport - launchd already started us
3/13/11 9:09:09 PM com.apple.SystemStarter[36] Starting Qmaster services
3/13/11 9:09:09 PM com.apple.SystemStarter[36] Starting HP IO Monitor
3/13/11 9:09:10 PM com.apple.SystemStarter[36] Starting HP Trap Monitor
3/13/11 9:09:10 PM com.apple.SystemStarter[36] /Library/StartupItems/HP Trap Monitor/HP Trap Monitor: line 15: /Library/Printers/hp/hpio/HPIO Trap Monitor.app/Contents/MacOS/HPIO Trap Monitor: No such file or directory
3/13/11 9:09:14 PM apsd-ft[240] <APSCourier: 0x106731a70>: Received connected response OK
3/13/11 9:09:43 PM com.apple.launchd[1] (com.apple.aslmanager) Throttling respawn: Will start in 5 seconds
3/13/11 9:09:44 PM com.apple.launchd[1] (com.apple.aslmanager) Throttling respawn: Will start in 4 seconds
3/13/11 9:09:44 PM com.apple.launchd[1] (com.apple.aslmanager) Throttling respawn: Will start in 4 seconds
3/13/11 9:09:52 PM com.apple.launchd[1] (com.apple.aslmanager) Throttling respawn: Will start in 6 seconds
3/13/11 9:09:52 PM com.apple.launchd[1] (0x101804850.mach_init.VersionCueCS2Daemon[320]) Exited with exit code: 1
3/13/11 9:10:12 PM osascript[333] Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
3/13/11 9:10:20 PM com.apple.fontd[209] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)

Gave it a shot, no luck. Thanks for the info. Here's the log directly after I restarted after trying the above fix. I added a line to show the startup obviously:
3/13/11 11:02:27 PM kernel npvhash=4095
3/13/11 11:02:27 PM kernel PAE enabled
3/13/11 11:02:27 PM kernel 64 bit mode enabled
3/13/11 11:02:27 PM kernel Darwin Kernel Version 10.6.0: Wed Nov 10 18:13:17 PST 2010; root:xnu-1504.9.26~3/RELEASE_I386
3/13/11 11:02:27 PM kernel vmpagebootstrap: 1021192 free pages and 19192 wired pages
3/13/11 11:02:27 PM kernel standard timeslicing quantum is 10000 us
3/13/11 11:02:27 PM kernel migtable_maxdispl = 73
3/13/11 11:02:27 PM kernel AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
3/13/11 11:02:27 PM kernel AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
3/13/11 11:02:27 PM kernel calling mpopolicyinit for Quarantine
3/13/11 11:02:27 PM kernel Security policy loaded: Quarantine policy (Quarantine)
3/13/11 11:02:27 PM kernel calling mpopolicyinit for Sandbox
3/13/11 11:02:27 PM kernel Security policy loaded: Seatbelt sandbox policy (Sandbox)
3/13/11 11:02:27 PM kernel calling mpopolicyinit for TMSafetyNet
3/13/11 11:02:27 PM kernel Security policy loaded: Safety net for Time Machine (TMSafetyNet)
3/13/11 11:02:27 PM kernel Copyright (c) 1982, 1986, 1989, 1991, 1993
3/13/11 11:02:27 PM kernel The Regents of the University of California. All rights reserved.
3/13/11 11:02:27 PM kernel MAC Framework successfully initialized
3/13/11 11:02:27 PM kernel using 16384 buffer headers and 4096 cluster IO buffer headers
3/13/11 11:02:27 PM kernel IOAPIC: Version 0x20 Vectors 64:87
3/13/11 11:02:27 PM kernel ACPI: System State [S0 S3 S4 S5] (S3)
3/13/11 11:02:27 PM kernel Sleep failure codAppleIntelCPe UPowerManagement: initialization complete
3/13/11 11:02:27 PM kernel 0x00002000 0x14000000
3/13/11 11:02:27 PM kernel mbinit: done (64 MB memory set for mbuf pool)
3/13/11 11:02:27 PM kernel rooting via boot-uuid from /chosen: B2D6BDBB-4CD1-3327-BEF8-6BADB8B110E0
3/13/11 11:02:27 PM kernel Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
3/13/11 11:02:27 PM kernel com.apple.AppleFSCompressionTypeZlib kmod start
3/13/11 11:02:27 PM kernel com.apple.AppleFSCompressionTypeZlib load succeeded
3/13/11 11:02:27 PM kernel AppleIntelCPUPowerManagementClient: ready
3/13/11 11:02:27 PM kernel Got boot device = IOService:/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/SATA@1F,2/AppleICH8AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/FUJITSU MHW2120BH Media/IOGUIDPartitionScheme/Customer@2
3/13/11 11:02:27 PM kernel BSD root: disk0s2, major 14, minor 2
3/13/11 11:02:27 PM kernel jnl: unknown-dev: replay_journal: from: 15467520 to: 1031680 (joffset 0x7d01000)
3/13/11 11:02:27 PM kernel [Bluetooth::CSRHIDTransition] switchToHCIMode (legacy)
3/13/11 11:02:27 PM kernel FireWire (OHCI) TI ID 8025 built-in now active, GUID 001cb3fffe815b4e; max speed s100.
3/13/11 11:02:27 PM kernel [Bluetooth::CSRHIDTransition] transition complete.
3/13/11 11:02:27 PM kernel jnl: unknown-dev: journal replay done.
3/13/11 11:02:27 PM kernel CSRUSBBluetoothHCIController::setupHardware super returned 0
3/13/11 11:02:27 PM kernel hfs: Removed 28 orphaned / unlinked files and 0 directories
~~~~~~~~~~~~~~~~~~STARTUP~~~~~~~~~~~~~~~~~~
3/13/11 11:02:15 PM com.apple.launchd[1] * launchd[1] has started up. *
3/13/11 11:02:27 PM DirectoryService[11] Improper shutdown detected
3/13/11 11:02:29 PM kernel systemShutdown false
3/13/11 11:02:30 PM blued[17] Apple Bluetooth daemon started
3/13/11 11:02:43 PM mDNSResponder[18] mDNSResponder mDNSResponder-258.14 (Nov 18 2010 14:18:32) starting
3/13/11 11:02:43 PM com.apple.SecurityServer[23] Session 0x5fbff962 created
3/13/11 11:02:43 PM com.apple.SecurityServer[23] Entering service
3/13/11 11:02:44 PM configd[14] network configuration changed.
3/13/11 11:02:44 PM configd[14] setting hostname to "colin-mac.local"
3/13/11 11:02:44 PM mDNSResponder[18] Adding registration domain colinsheridan.members.mac.com.
3/13/11 11:02:45 PM blued[17] writeExtendedInquiryResponse returned 26
3/13/11 11:02:45 PM blued[17] writeExtendedInquiryResponse returned 44
3/13/11 11:02:46 PM kernel Previous Shutdown Cause: 3
3/13/11 11:02:46 PM configd[14] network configuration changed.
3/13/11 11:02:46 PM awacsd[26] Starting awacsd connectivity-32 $Rev: 907 $ (Nov 6 2010 15:06:27)
3/13/11 11:02:46 PM awacsd[26] Connecting AWACS client: colinsheridan hello.connectivity.me.com
3/13/11 11:02:47 PM kernel Atheros: mac 12.2 phy 8.1 radio 12.0
3/13/11 11:02:47 PM kernel NVDANV50HAL loaded and registered.
3/13/11 11:02:47 PM com.apple.kextd[10] Can't load /System/Library/Extensions/KensingtonMouseDriver.kext/Contents/PlugIns/Kensingt onMouseDriverX1.kext - no code for running kernel's architecture.
3/13/11 11:02:47 PM com.apple.kextd[10] Failed to load /System/Library/Extensions/KensingtonMouseDriver.kext/Contents/PlugIns/Kensingt onMouseDriverX1.kext - (libkern/kext) requested architecture/executable not found.
3/13/11 11:02:47 PM com.apple.kextd[10] Load com.kensington.mouseworks.iokit.KensingtonMouseDriverX1 failed; removing personalities.
3/13/11 11:02:48 PM kernel Alesis Firewire CJ - 3.0.81.1080 - Jan 21 2008 16:04:46 - (c) Singing Electrons Inc. 2004-2007
3/13/11 11:02:48 PM kernel DSMOS has arrived
3/13/11 11:02:48 PM kernel AirPort_AthrFusion21: Ethernet address 00:1c:b3:b3:1b:8e
3/13/11 11:02:48 PM kernel IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
3/13/11 11:02:48 PM kernel RBIOKitController: started.
3/13/11 11:02:48 PM kernel AirPort: Link Down on en1. Reason 1 (Unspecified).
3/13/11 11:02:48 PM com.apple.kextd[10] Can't load /System/Library/Extensions/KensingtonMouseDriver.kext/Contents/PlugIns/VirtualM ouseX1.kext - no code for running kernel's architecture.
3/13/11 11:02:48 PM com.apple.kextd[10] Failed to load /System/Library/Extensions/KensingtonMouseDriver.kext/Contents/PlugIns/VirtualM ouseX1.kext - (libkern/kext) requested architecture/executable not found.
3/13/11 11:02:48 PM com.apple.kextd[10] Load com.kensington.mouseworks.driver.VirtualMouseX1 failed; removing personalities.
3/13/11 11:02:48 PM kernel en1: 802.11d country code set to 'US'.
3/13/11 11:02:48 PM kernel en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 149 153 157 161 165
3/13/11 11:02:48 PM configd[14] network configuration changed.
3/13/11 11:00:56 PM login[552] DEAD_PROCESS: 552 ttys000
3/13/11 11:02:50 PM bootlog[55] BOOT_TIME: 1300082532 0
3/13/11 11:02:50 PM /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[44] Login Window Application Started
3/13/11 11:02:50 PM fseventsd[48] event logs in /.fseventsd out of sync with volume. destroying old logs. (3095 38 3198)
3/13/11 11:02:50 PM kernel AirPort: Link Up on en1
3/13/11 11:02:50 PM fseventsd[48] log dir: /.fseventsd getting new uuid: EE8CCE38-A733-4A68-9F6C-99D1501E3EBE
3/13/11 11:02:50 PM com.apple.usbmuxd[35] usbmuxd-211 built on Jan 13 2011 at 04:20:21 on Jan 13 2011 at 04:20:21, running 64 bit
3/13/11 11:02:52 PM org.apache.httpd[31] httpd: Could not reliably determine the server's fully qualified domain name, using colin-mac.local for ServerName
3/13/11 11:02:52 PM Parallels[89] Loading kernel extension prl_hypervisor.kext
3/13/11 11:02:53 PM kernel AppleYukon2: Marvell Yukon Gigabit Adapter 88E8055 Singleport Copper SA
3/13/11 11:02:53 PM kernel AppleYukon2: RxRingSize <= 1024, TxRingSize 256, RXMAXLE 1024, TXMAXLE 768, STMAXLE 3328
3/13/11 11:02:54 PM configd[14] network configuration changed.
3/13/11 11:02:54 PM com.apple.launchd[1] (org.apache.httpd) Throttling respawn: Will start in 6 seconds
3/13/11 11:02:55 PM kernel yukon: Ethernet address 00:1b:63:98:39:54
3/13/11 11:02:56 PM com.parallels.desktop.launchdaemon[59] objc[72]: Class QMacSoundDelegate is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:02:56 PM com.parallels.desktop.launchdaemon[59] objc[72]: Class QNSMenu is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:02:56 PM com.parallels.desktop.launchdaemon[59] objc[72]: Class QNSStatusItem is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:02:56 PM com.parallels.desktop.launchdaemon[59] objc[72]: Class QNSImageView is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:02:58 PM kernel utunctlconnect: creating interface utun0
3/13/11 11:03:00 PM com.apple.launchd[1] (org.apache.httpd) Throttling respawn: Will start in 10 seconds
3/13/11 11:03:02 PM com.apple.launchd[1] (org.apache.httpd) Throttling respawn: Will start in 8 seconds
3/13/11 11:03:02 PM Parallels[103] Loading kernel extension prlhidhook.kext
3/13/11 11:03:02 PM Parallels[109] Loading kernel extension prlusbconnect.kext
3/13/11 11:03:02 PM Parallels[114] Trying to load kernel extensions, exit status: 0
3/13/11 11:03:02 PM Parallels[117] Starting Parallels networking...
3/13/11 11:03:02 PM Parallels[120] Loading kernel extension prl_netbridge.kext
3/13/11 11:03:03 PM kernel /drv/ HypApic.c:234 Host APIC phy 0xFEE00000 lin 0x559a2000 ver 0x14
3/13/11 11:03:03 PM kernel /drv/ HypRealCpu.c:189 hypRealCpusInfoInit: STATUS_SUCCESS
3/13/11 11:03:03 PM kernel /drv/ HypLowCache.c:158 Low cache initialized (3904 kB for 8 VMs on 4096 MB)
3/13/11 11:03:03 PM kernel /drv/ HypModule.c:178 Parallels IPI irq = 0 ipi = 0(0x0)
3/13/11 11:03:03 PM kernel /drv/ HypModule.c:181 Parallels Hypervisor 4.0.3848.450204 loaded.
3/13/11 11:03:03 PM kernel /prl_hid/ Parallels HID Helper started.
3/13/11 11:03:04 PM Parallels[125] Loading kernel extension prl_vnic.kext
3/13/11 11:03:04 PM kernel com.parallels.kext.prlnet 4.0.3848.450204 has started.
3/13/11 11:03:05 PM kernel com.parallels.kext.vnic 4.0.3848.450204 has started.
3/13/11 11:03:05 PM kernel comparallels_kext_prl_vnic_device0: Ethernet address 00:1c:42:00:00:08
3/13/11 11:03:05 PM kernel comparallels_kext_prl_vnic_device1: Ethernet address 00:1c:42:00:00:09
3/13/11 11:03:06 PM com.apple.launchd[1] (com.parallels.vm.prl_naptd) Unknown key for boolean: SuccessfulExit
3/13/11 11:03:06 PM prl_naptd[138] Starting Parallels Network Daemon
3/13/11 11:03:06 PM prl_naptd[138] en4: DHCP/NAT for 10.211.55.1-10.211.55.254 netmask 255.255.255.0
3/13/11 11:03:06 PM prl_naptd[138] en5: DHCP for 10.37.129.1-10.37.129.254 netmask 255.255.255.0
3/13/11 11:03:06 PM configd[14] network configuration changed.
3/13/11 11:03:06 PM configd[14] network configuration changed.
3/13/11 11:03:07 PM com.parallels.desktop.launchdaemon[59] Configuring en4...
3/13/11 11:03:07 PM com.parallels.desktop.launchdaemon[59] No System Preferences changes required.
3/13/11 11:03:07 PM com.parallels.desktop.launchdaemon[59] Configuring en5...
3/13/11 11:03:07 PM com.parallels.desktop.launchdaemon[59] No System Preferences changes required.
3/13/11 11:03:07 PM Parallels[139] Parallels networking sucessfully started
3/13/11 11:03:08 PM Parallels[142] Restarting CiscoVPN
3/13/11 11:03:08 PM SystemStarter[144] Unknown service: CiscoVPN
3/13/11 11:03:08 PM Parallels[147] Starting Parallels Dispatcher Service
3/13/11 11:03:08 PM Parallels[151] Parallels Dispatcher Server sucessfully started
3/13/11 11:03:09 PM kernel utunctlconnect: creating interface utun0
3/13/11 11:03:28 PM configd[14] InterfaceNamer: timed out waiting for IOKit to quiesce
3/13/11 11:03:28 PM configd[14] InterfaceNamer: Busy services :
3/13/11 11:03:28 PM configd[14] InterfaceNamer: MacBookPro3,1 [1]
3/13/11 11:03:28 PM configd[14] InterfaceNamer: MacBookPro3,1/AppleACPIPlatformExpert [1]
3/13/11 11:03:28 PM configd[14] InterfaceNamer: MacBookPro3,1/AppleACPIPlatformExpert/PCI0 [1]
3/13/11 11:03:28 PM configd[14] InterfaceNamer: MacBookPro3,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI [1]
3/13/11 11:03:28 PM configd[14] InterfaceNamer: MacBookPro3,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/PCIB@1E [1]
3/13/11 11:03:28 PM configd[14] InterfaceNamer: MacBookPro3,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/PCIB@1E/IOPCI2PCIBridge [1]
3/13/11 11:03:28 PM configd[14] InterfaceNamer: MacBookPro3,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/PCIB@1E/IOPCI2PCIBridge /FRWR@3 [1]
3/13/11 11:03:28 PM configd[14] InterfaceNamer: MacBookPro3,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/PCIB@1E/IOPCI2PCIBridge /FRWR@3/AppleFWOHCI [1]
3/13/11 11:03:28 PM configd[14] InterfaceNamer: MacBookPro3,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/PCIB@1E/IOPCI2PCIBridge /FRWR@3/AppleFWOHCI/IOFireWireController [1]
3/13/11 11:03:28 PM configd[14] InterfaceNamer: MacBookPro3,1/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/PCIB@1E/IOPCI2PCIBridge /FRWR@3/AppleFWOHCI/IOFireWireController/IOFireWireLocalNode [2]
3/13/11 11:03:55 PM WindowServer[88] kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
3/13/11 11:03:55 PM com.apple.WindowServer[88] Sun Mar 13 23:03:55 colin-mac.local WindowServer[88] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
3/13/11 11:03:59 PM com.apple.SecurityServer[23] Session 0x22e923 created
3/13/11 11:03:59 PM com.apple.SecurityServer[23] Session 0x22e923 attributes 0x30
3/13/11 11:04:03 PM loginwindow[44] Login Window Started Security Agent
3/13/11 11:04:06 PM SecurityAgent[177] Showing Login Window
3/13/11 11:07:56 PM /usr/libexec/hidd[47] Timeout waiting for IOKit to be quiet
3/13/11 11:11:56 PM WindowServer[88] Timeout waiting for IOKit to be quiet
3/13/11 11:12:01 PM SecurityAgent[177] User info context values set for colinsheridan
3/13/11 11:12:02 PM authorizationhost[175] Failed to authenticate user <colinsheridan> (tDirStatus: -14090).
3/13/11 11:12:04 PM SecurityAgent[177] User info context values set for colinsheridan
3/13/11 11:12:05 PM SecurityAgent[177] Login Window Showing Progress
3/13/11 11:12:05 PM SecurityAgent[177] Login Window done
3/13/11 11:12:05 PM loginwindow[44] Login Window - Returned from Security Agent
3/13/11 11:12:05 PM loginwindow[44] USER_PROCESS: 44 console
3/13/11 11:12:05 PM com.apple.UserEventAgent-LoginWindow[165] ALF error: cannot find useragent 1102
3/13/11 11:12:05 PM com.apple.UserEventAgent-LoginWindow[165] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
3/13/11 11:12:05 PM com.apple.launchd[1] (com.wacom.wacomtablet[169]) Exited with exit code: 255
3/13/11 11:12:05 PM com.apple.launchd.peruser.502[186] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QMacSoundDelegate is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSMenu is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSStatusItem is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSImageView is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:17 PM com.apple.launchd.peruser.502[186] (com.apple.Kerberos.renew.plist[209]) Exited with exit code: 1
3/13/11 11:12:32 PM com.apple.usbmuxd[35] HandleUSBMuxDictionary client 0x10180f4b0-iTunesHelper/com.apple.iTunesHelper using library usbmuxd-211 built on Jan 13 2011 at 04:19:31, running usbmuxd-211 built on Jan 13 2011 at 04:20:21
3/13/11 11:12:33 PM apsd-ft[239] APS daemon launched
3/13/11 11:12:36 PM apsd-ft[239] Successfully got client identity
3/13/11 11:12:48 PM hdiejectd[259] running
3/13/11 11:12:49 PM kernel jnl: disk1s2: replay_journal: from: 2746880 to: 3505664 (joffset 0x23000)
3/13/11 11:12:49 PM SystemStarter[36] IOKitWaitQuiet: -536870186
3/13/11 11:12:50 PM apsd-ft[239] <APSCourier: 0x10011de50>: Received connected response OK
3/13/11 11:12:54 PM fseventsd[48] event logs in /Volumes/colinsheridan/.fseventsd out of sync with volume. destroying old logs. (3164 6 3873)
3/13/11 11:12:54 PM fseventsd[48] log dir: /Volumes/colinsheridan/.fseventsd getting new uuid: 2C198081-1D10-4AAA-A186-3AF62CBF27E0
3/13/11 11:12:55 PM kernel jnl: disk1s2: journal replay done.
3/13/11 11:12:56 PM com.apple.SystemStarter[36] PACESupport - launchd already started us
3/13/11 11:12:57 PM com.apple.SystemStarter[36] Starting Qmaster services
3/13/11 11:12:57 PM com.apple.SystemStarter[36] Starting HP IO Monitor
3/13/11 11:12:58 PM iScrobbler[235] Initializer-based scripting additions have been deprecated. Please update this addition: "/Library/ScriptingAdditions/Adobe Unit Types.osax"
3/13/11 11:12:58 PM com.apple.SystemStarter[36] Starting HP Trap Monitor
3/13/11 11:12:59 PM com.apple.SystemStarter[36] /Library/StartupItems/HP Trap Monitor/HP Trap Monitor: line 15: /Library/Printers/hp/hpio/HPIO Trap Monitor.app/Contents/MacOS/HPIO Trap Monitor: No such file or directory
3/13/11 11:00:56 PM login[552] DEAD_PROCESS: 552 ttys000
3/13/11 11:02:50 PM bootlog[55] BOOT_TIME: 1300082532 0
3/13/11 11:12:05 PM loginwindow[44] USER_PROCESS: 44 console
3/13/11 11:12:05 PM com.apple.UserEventAgent-LoginWindow[165] ALF error: cannot find useragent 1102
3/13/11 11:12:05 PM com.apple.UserEventAgent-LoginWindow[165] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
3/13/11 11:12:05 PM com.apple.launchd[1] (com.wacom.wacomtablet[169]) Exited with exit code: 255
3/13/11 11:12:05 PM com.apple.launchd.peruser.502[186] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QMacSoundDelegate is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSMenu is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSStatusItem is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSImageView is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:17 PM com.apple.launchd.peruser.502[186] (com.apple.Kerberos.renew.plist[209]) Exited with exit code: 1
3/13/11 11:12:32 PM com.apple.usbmuxd[35] HandleUSBMuxDictionary client 0x10180f4b0-iTunesHelper/com.apple.iTunesHelper using library usbmuxd-211 built on Jan 13 2011 at 04:19:31, running usbmuxd-211 built on Jan 13 2011 at 04:20:21
3/13/11 11:12:33 PM apsd-ft[239] APS daemon launched
3/13/11 11:12:36 PM apsd-ft[239] Successfully got client identity
3/13/11 11:12:48 PM hdiejectd[259] running
3/13/11 11:12:49 PM kernel jnl: disk1s2: replay_journal: from: 2746880 to: 3505664 (joffset 0x23000)
3/13/11 11:12:49 PM SystemStarter[36] IOKitWaitQuiet: -536870186
3/13/11 11:12:50 PM apsd-ft[239] <APSCourier: 0x10011de50>: Received connected response OK
3/13/11 11:12:54 PM fseventsd[48] event logs in /Volumes/colinsheridan/.fseventsd out of sync with volume. destroying old logs. (3164 6 3873)
3/13/11 11:12:54 PM fseventsd[48] log dir: /Volumes/colinsheridan/.fseventsd getting new uuid: 2C198081-1D10-4AAA-A186-3AF62CBF27E0
3/13/11 11:12:55 PM kernel jnl: disk1s2: journal replay done.
3/13/11 11:12:56 PM com.apple.SystemStarter[36] PACESupport - launchd already started us
3/13/11 11:12:57 PM com.apple.SystemStarter[36] Starting Qmaster services
3/13/11 11:12:57 PM com.apple.SystemStarter[36] Starting HP IO Monitor
3/13/11 11:12:58 PM iScrobbler[235] Initializer-based scripting additions have been deprecated. Please update this addition: "/Library/ScriptingAdditions/Adobe Unit Types.osax"
3/13/11 11:12:58 PM com.apple.SystemStarter[36] Starting HP Trap Monitor
3/13/11 11:12:59 PM com.apple.SystemStarter[36] /Library/StartupItems/HP Trap Monitor/HP Trap Monitor: line 15: /Library/Printers/hp/hpio/HPIO Trap Monitor.app/Contents/MacOS/HPIO Trap Monitor: No such file or directory
3/13/11 11:00:56 PM login[552] DEAD_PROCESS: 552 ttys000
3/13/11 11:02:50 PM bootlog[55] BOOT_TIME: 1300082532 0
3/13/11 11:12:05 PM loginwindow[44] USER_PROCESS: 44 console
3/13/11 11:12:05 PM com.apple.UserEventAgent-LoginWindow[165] ALF error: cannot find useragent 1102
3/13/11 11:12:05 PM com.apple.UserEventAgent-LoginWindow[165] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
3/13/11 11:12:05 PM com.apple.launchd[1] (com.wacom.wacomtablet[169]) Exited with exit code: 255
3/13/11 11:12:05 PM com.apple.launchd.peruser.502[186] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QMacSoundDelegate is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSMenu is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSStatusItem is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSImageView is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:17 PM com.apple.launchd.peruser.502[186] (com.apple.Kerberos.renew.plist[209]) Exited with exit code: 1
3/13/11 11:12:32 PM com.apple.usbmuxd[35] HandleUSBMuxDictionary client 0x10180f4b0-iTunesHelper/com.apple.iTunesHelper using library usbmuxd-211 built on Jan 13 2011 at 04:19:31, running usbmuxd-211 built on Jan 13 2011 at 04:20:21
3/13/11 11:12:33 PM apsd-ft[239] APS daemon launched
3/13/11 11:12:36 PM apsd-ft[239] Successfully got client identity
3/13/11 11:12:48 PM hdiejectd[259] running
3/13/11 11:12:49 PM kernel jnl: disk1s2: replay_journal: from: 2746880 to: 3505664 (joffset 0x23000)
3/13/11 11:12:49 PM SystemStarter[36] IOKitWaitQuiet: -536870186
3/13/11 11:12:50 PM apsd-ft[239] <APSCourier: 0x10011de50>: Received connected response OK
3/13/11 11:12:54 PM fseventsd[48] event logs in /Volumes/colinsheridan/.fseventsd out of sync with volume. destroying old logs. (3164 6 3873)
3/13/11 11:12:54 PM fseventsd[48] log dir: /Volumes/colinsheridan/.fseventsd getting new uuid: 2C198081-1D10-4AAA-A186-3AF62CBF27E0
3/13/11 11:12:55 PM kernel jnl: disk1s2: journal replay done.
3/13/11 11:12:56 PM com.apple.SystemStarter[36] PACESupport - launchd already started us
3/13/11 11:12:57 PM com.apple.SystemStarter[36] Starting Qmaster services
3/13/11 11:12:57 PM com.apple.SystemStarter[36] Starting HP IO Monitor
3/13/11 11:12:58 PM iScrobbler[235] Initializer-based scripting additions have been deprecated. Please update this addition: "/Library/ScriptingAdditions/Adobe Unit Types.osax"
3/13/11 11:12:58 PM com.apple.SystemStarter[36] Starting HP Trap Monitor
3/13/11 11:12:59 PM com.apple.SystemStarter[36] /Library/StartupItems/HP Trap Monitor/HP Trap Monitor: line 15: /Library/Printers/hp/hpio/HPIO Trap Monitor.app/Contents/MacOS/HPIO Trap Monitor: No such file or directory
3/13/11 11:00:56 PM login[552] DEAD_PROCESS: 552 ttys000
3/13/11 11:02:50 PM bootlog[55] BOOT_TIME: 1300082532 0
3/13/11 11:12:05 PM loginwindow[44] USER_PROCESS: 44 console
3/13/11 11:12:05 PM com.apple.UserEventAgent-LoginWindow[165] ALF error: cannot find useragent 1102
3/13/11 11:12:05 PM com.apple.UserEventAgent-LoginWindow[165] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
3/13/11 11:12:05 PM com.apple.launchd[1] (com.wacom.wacomtablet[169]) Exited with exit code: 255
3/13/11 11:12:05 PM com.apple.launchd.peruser.502[186] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QMacSoundDelegate is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSMenu is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSStatusItem is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSImageView is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:17 PM com.apple.launchd.peruser.502[186] (com.apple.Kerberos.renew.plist[209]) Exited with exit code: 1
3/13/11 11:12:32 PM com.apple.usbmuxd[35] HandleUSBMuxDictionary client 0x10180f4b0-iTunesHelper/com.apple.iTunesHelper using library usbmuxd-211 built on Jan 13 2011 at 04:19:31, running usbmuxd-211 built on Jan 13 2011 at 04:20:21
3/13/11 11:12:33 PM apsd-ft[239] APS daemon launched
3/13/11 11:12:36 PM apsd-ft[239] Successfully got client identity
3/13/11 11:12:48 PM hdiejectd[259] running
3/13/11 11:12:49 PM kernel jnl: disk1s2: replay_journal: from: 2746880 to: 3505664 (joffset 0x23000)
3/13/11 11:12:49 PM SystemStarter[36] IOKitWaitQuiet: -536870186
3/13/11 11:12:50 PM apsd-ft[239] <APSCourier: 0x10011de50>: Received connected response OK
3/13/11 11:12:54 PM fseventsd[48] event logs in /Volumes/colinsheridan/.fseventsd out of sync with volume. destroying old logs. (3164 6 3873)
3/13/11 11:12:54 PM fseventsd[48] log dir: /Volumes/colinsheridan/.fseventsd getting new uuid: 2C198081-1D10-4AAA-A186-3AF62CBF27E0
3/13/11 11:12:55 PM kernel jnl: disk1s2: journal replay done.
3/13/11 11:12:56 PM com.apple.SystemStarter[36] PACESupport - launchd already started us
3/13/11 11:12:57 PM com.apple.SystemStarter[36] Starting Qmaster services
3/13/11 11:12:57 PM com.apple.SystemStarter[36] Starting HP IO Monitor
3/13/11 11:12:58 PM iScrobbler[235] Initializer-based scripting additions have been deprecated. Please update this addition: "/Library/ScriptingAdditions/Adobe Unit Types.osax"
3/13/11 11:12:58 PM com.apple.SystemStarter[36] Starting HP Trap Monitor
3/13/11 11:12:59 PM com.apple.SystemStarter[36] /Library/StartupItems/HP Trap Monitor/HP Trap Monitor: line 15: /Library/Printers/hp/hpio/HPIO Trap Monitor.app/Contents/MacOS/HPIO Trap Monitor: No such file or directory
3/13/11 11:00:56 PM login[552] DEAD_PROCESS: 552 ttys000
3/13/11 11:02:50 PM bootlog[55] BOOT_TIME: 1300082532 0
3/13/11 11:12:05 PM loginwindow[44] USER_PROCESS: 44 console
3/13/11 11:12:05 PM com.apple.UserEventAgent-LoginWindow[165] ALF error: cannot find useragent 1102
3/13/11 11:12:05 PM com.apple.UserEventAgent-LoginWindow[165] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
3/13/11 11:12:05 PM com.apple.launchd[1] (com.wacom.wacomtablet[169]) Exited with exit code: 255
3/13/11 11:12:05 PM com.apple.launchd.peruser.502[186] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QMacSoundDelegate is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSMenu is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSStatusItem is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSImageView is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:17 PM com.apple.launchd.peruser.502[186] (com.apple.Kerberos.renew.plist[209]) Exited with exit code: 1
3/13/11 11:12:32 PM com.apple.usbmuxd[35] HandleUSBMuxDictionary client 0x10180f4b0-iTunesHelper/com.apple.iTunesHelper using library usbmuxd-211 built on Jan 13 2011 at 04:19:31, running usbmuxd-211 built on Jan 13 2011 at 04:20:21
3/13/11 11:12:33 PM apsd-ft[239] APS daemon launched
3/13/11 11:12:36 PM apsd-ft[239] Successfully got client identity
3/13/11 11:12:48 PM hdiejectd[259] running
3/13/11 11:12:49 PM kernel jnl: disk1s2: replay_journal: from: 2746880 to: 3505664 (joffset 0x23000)
3/13/11 11:12:49 PM SystemStarter[36] IOKitWaitQuiet: -536870186
3/13/11 11:12:50 PM apsd-ft[239] <APSCourier: 0x10011de50>: Received connected response OK
3/13/11 11:12:54 PM fseventsd[48] event logs in /Volumes/colinsheridan/.fseventsd out of sync with volume. destroying old logs. (3164 6 3873)
3/13/11 11:12:54 PM fseventsd[48] log dir: /Volumes/colinsheridan/.fseventsd getting new uuid: 2C198081-1D10-4AAA-A186-3AF62CBF27E0
3/13/11 11:12:55 PM kernel jnl: disk1s2: journal replay done.
3/13/11 11:12:56 PM com.apple.SystemStarter[36] PACESupport - launchd already started us
3/13/11 11:12:57 PM com.apple.SystemStarter[36] Starting Qmaster services
3/13/11 11:12:57 PM com.apple.SystemStarter[36] Starting HP IO Monitor
3/13/11 11:12:58 PM iScrobbler[235] Initializer-based scripting additions have been deprecated. Please update this addition: "/Library/ScriptingAdditions/Adobe Unit Types.osax"
3/13/11 11:12:58 PM com.apple.SystemStarter[36] Starting HP Trap Monitor
3/13/11 11:12:59 PM com.apple.SystemStarter[36] /Library/StartupItems/HP Trap Monitor/HP Trap Monitor: line 15: /Library/Printers/hp/hpio/HPIO Trap Monitor.app/Contents/MacOS/HPIO Trap Monitor: No such file or directory
3/13/11 11:13:22 PM VersionCueCS2Daemon[313] warning: VersionCueCS2Daemon not started by mach_init process (parent pid: 1)
3/13/11 11:13:22 PM VersionCueCS2Daemon[313] VCEnvironmentSetCWD() failed to set CWD to '/Applications/Adobe Version Cue CS2' <2>
3/13/11 11:13:22 PM com.apple.launchd[1] (0x10041e2a0.mach_init.VersionCueCS2Daemon[313]) Exited with exit code: 1
3/13/11 11:00:56 PM login[552] DEAD_PROCESS: 552 ttys000
3/13/11 11:02:50 PM bootlog[55] BOOT_TIME: 1300082532 0
3/13/11 11:12:05 PM loginwindow[44] USER_PROCESS: 44 console
3/13/11 11:12:05 PM com.apple.UserEventAgent-LoginWindow[165] ALF error: cannot find useragent 1102
3/13/11 11:12:05 PM com.apple.UserEventAgent-LoginWindow[165] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
3/13/11 11:12:05 PM com.apple.launchd[1] (com.wacom.wacomtablet[169]) Exited with exit code: 255
3/13/11 11:12:05 PM com.apple.launchd.peruser.502[186] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QMacSoundDelegate is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSMenu is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSStatusItem is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:16 PM com.parallels.desktop.client.launch[213] objc[213]: Class QNSImageView is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
3/13/11 11:12:17 PM com.apple.launchd.peruser.502[186] (com.apple.Kerberos.renew.plist[209]) Exited with exit code: 1
3/13/11 11:12:32 PM com.apple.usbmuxd[35] HandleUSBMuxDictionary client 0x10180f4b0-iTunesHelper/com.apple.iTunesHelper using library usbmuxd-211 built on Jan 13 2011 at 04:19:31, running usbmuxd-211 built on Jan 13 2011 at 04:20:21
3/13/11 11:12:33 PM apsd-ft[239] APS daemon launched
3/13/11 11:12:36 PM apsd-ft[239] Successfully got client identity
3/13/11 11:12:48 PM hdiejectd[259] running
3/13/11 11:12:49 PM kernel jnl: disk1s2: replay_journal: from: 2746880 to: 3505664 (joffset 0x23000)
3/13/11 11:12:49 PM SystemStarter[36] IOKitWaitQuiet: -536870186
3/13/11 11:12:50 PM apsd-ft[239] <APSCourier: 0x10011de50>: Received connected response OK
3/13/11 11:12:54 PM fseventsd[48] event logs in /Volumes/colinsheridan/.fseventsd out of sync with volume. destroying old logs. (3164 6 3873)
3/13/11 11:12:54 PM fseventsd[48] log dir: /Volumes/colinsheridan/.fseventsd getting new uuid: 2C198081-1D10-4AAA-A186-3AF62CBF27E0
3/13/11 11:12:55 PM kernel jnl: disk1s2: journal replay done.
3/13/11 11:12:56 PM com.apple.SystemStarter[36] PACESupport - launchd already started us
3/13/11 11:12:57 PM com.apple.SystemStarter[36] Starting Qmaster services
3/13/11 11:12:57 PM com.apple.SystemStarter[36] Starting HP IO Monitor
3/13/11 11:12:58 PM iScrobbler[235] Initializer-based scripting additions have been deprecated. Please update this addition: "/Library/ScriptingAdditions/Adobe Unit Types.osax"
3/13/11 11:12:58 PM com.apple.SystemStarter[36] Starting HP Trap Monitor
3/13/11 11:12:59 PM com.apple.SystemStarter[36] /Library/StartupItems/HP Trap Monitor/HP Trap Monitor: line 15: /Library/Printers/hp/hpio/HPIO Trap Monitor.app/Contents/MacOS/HPIO Trap Monitor: No such file or directory
3/13/11 11:13:22 PM VersionCueCS2Daemon[313] warning: VersionCueCS2Daemon not started by mach_init process (parent pid: 1)
3/13/11 11:13:22 PM VersionCueCS2Daemon[313] VCEnvironmentSetCWD() failed to set CWD to '/Applications/Adobe Version Cue CS2' <2>
3/13/11 11:13:22 PM com.apple.launchd[1] (0x10041e2a0.mach_init.VersionCueCS2Daemon[313]) Exited with exit code: 1
3/13/11 11:13:29 PM osascript[320] Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
3/13/11 11:00:56 PM login[552] DEAD_PROCESS: 552 ttys000
3/13/11 11:02:50 PM bootlog[55] BOOT_TIME: 1300082532 0
3/13/11 11:12:05 PM loginwindow[44] USER_PROCESS: 44 console

Help needed with Windows 8.1 boot and recovery issue

Hi. I hope someone can help me out with this Windows 8.1 issue. A friends computer (HP 2000-2c27CL Notebook) was badly infected and while I was able to do some cleaning in normal Windows I had to do some in Safe Mode. I was not being able to access Safe Mode so I went to Advanced Startup Options in Windows 8, Troubleshoot, then Advanced options, and finally the Command Prompt. Using the command prompt I typed "bcdedit /set {default} safeboot network" to have Safe Mode with Networking. Ever since I did that I haven't been able to get Windows to do a normal boot. I always get Safe Mode. I can't get back to Advanced Startup Options either. Via msconfig in Safe Mode I selected the Normal startup button on the General tab and selected apply and then ok. It then prompted me to restart the computer which I did. This did not fix the issue as I continue to get Safe Mode every time I start the computer. I also tried to do a complete system restore by typing "Recovery" in Windows 8 which brought up the HP Recovery Manager. Once in there I selected the Windows Recovery Environment and it prompted me to reboot the computer. I was expecting to get to an area where I could do a complete factory restore, but I again got booted into Safe Mode. What the heck is going on? The person who has this computer has no restore media... no USB or DVD discs made. There is however a recovery partition I believe, but as I said I can't do anything because I keep getting Safe Mode. Also I tried to use a antivirus emergency boot disk with this computer and I could not get it to boot from the DVDRom drive. I went into the BIOS and saw that Legacy is disabled and UEFI appears to be enabled by default. How am I to change the boot order to get it to boot from the disk and do scans for malware? I thought I did it correctly by moving the Rom drive to the top of the list, but that didn't work. I despise Windows 8x!!!
Help with this is greatly appreciated. Thank you.

Hi HPenn, welcome to the HP Forums. Unfortunately if you are unable to perform a recovery using any of the available methods: Performing an HP System Recovery (Windows 8)
You will have to order recovery media: Order software and driver media
I hope this helps.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

External display and sleep issues

A 15-inch MacBook Pro worked fine with an external display and keyboard prior to the 10.5.2 update. After the update the external display goes dark when the laptop is closed. Hitting the external keyboard momentarily wakes up the external display but then it almost immediately goes back to sleep. It's as if the MBP thinks it's in battery mode and not plugged into an AC outlet.
All Energy Saver settings are to keep the display awake. Could this be a corrupt driver or some other issue?
Thanks.

Theres been a lot of disscussion about this and it's a BIG problem. Check this out:
http://discussions.apple.com/thread.jspa?messageID=6597635&#6597635
http://discussions.apple.com/thread.jspa?messageID=6669894
A lot of us are having the following problems after the graphic update:
-not waking from sleep (waking, but display staying dark, restart is only solution)
-not being able to use in clamshell mode (with external monitor)
-not being able to run external monitor at full resolution
I've also had some weird bugs like the settings and calibration of my external somehow coming over to my MBP monitor after disconnecting the them.
I hope Apple can fix this.
Tim

After System Restore windows programs not loading, and other issues!

To preface this I have no interest in keeping vista on here I have a CD with windows7 setup on it that I would like to install either on a new partition or over the exsisting one but no clue how to do this right, and when I tried booting up from the CD it gave me an error, so I can't do the setup that way, however I did get a version of windows xp (hiren's minixp) to boot from a thumbdrive, however I could not get my wireless internet to work on it. however thru ethernet it did, but need wifi!) I need a computer for tomorrow morning for my new job orientation is done thru a website and I need a computer to use at thehotel (im out of town) so its not an option taking it to a repair shop tomorrow (its sunday and all), or sending back to lenovo plus its outta warranty.
Help! I am very novice at best with techy stuff so I will try to explain this the best that I can. I've had a lenovo N500 Laptop running Vista Home Edition for a couple years now. It did not come with any recover cd's or anything like that. It was starting to run slow, so I figured I'd do the old trusty Factory Restore and start fresh, always did the trick on other computers I owned with windows. Well I went through the whole process of restoring it, and did the initial system setup and naming. When it loaded my desktop for the first time it was all downhill from there. There is no IE installed, no default programs would open, instead I got this error message (example when opening Windows Mail).
C:\Program Files\Windows Mail\WinMail.exe
The specified path does not exsist.
Check the patch, and then try again.
It does this for every program. Here's the thing the only C:\ Drive that shows up is assigned to removable disk. Here are the current labels for my default Drives.
Lenovo(Q
ServiceV003(S
SW_Preload(D
So I think the issues possibly that when it was reformatted it labeled the drive a different letter, so it's trying to pull the files from the C drive as a path,. but it needs to be q or s or d or something. Keep in mind this is my very novice theory.

for wireless issue:
have you checked device managemer for unknown/non-installed devices? you may need to install drivers for your adapters.
try to press f8 when you see lenovo logo, then load "safe mode with networking", check if the adapters work.
can you tell us what error you got when you tried to install win7? also, some of applications doesn't come with preloaded systems so you need to install them later ( as windows mail, msn messenger )

Structured framemaker window does not maximize and other issues

Dear All,
My questions concerns the use of FM11 & FM12 in Structured FrameMaker mode under Windows 8.1.
When FM is started in Structured mode I find that the FrameMaker window is a fraction of the size that it was when operating in Unstructured mode. When the FM (structured) window is maximized instead of the window occupying the full screen as expected it occupies only about 2/3 of the screen. The receptors of dialog buttons (e.g. the OK and CANCEL buttons) are not at the locations of the on screen drawings of the buttons. In short, the Structured FrameMaker interface is not functional. And to be clear the interface of the Unstructured version of the program works in the expected manner.
My reason for operating with Structured FrameMaker in the first place is to workaround a very serious deficiency in the Unstructured version of the program in which attempting to print a book to the Adobe PDF virtual printer causes FrameMaker to crash. Another gripe with FrameMaker is that the Save As PDF file option fails to properly render the document - typically incorrect fonts are used in the output PDF file, equations are clipped, etc. etc. It is this deficiency that means we must print to the Adobe PDF virtual printer.
We are also experiencing intermittent crashing of the program in versions 11 & 12 for no apparent reason whereas previously (version 7, 5.5) the program seemed to be more robust.
Are others experiencing a significant deterioration in the performance of FrameMaker in recent releases? Are you considering changing to a different program? If so, what programs are you considering?
Many thanks,
David.

David,
FYI, the SaveAsPDF route also uses the AdobePDF printer instance, so some of the issues are due to selected output options and Distiller joboptions. Also, both versions (structured and unstructured) use the same output mechanism independent of the interface.
The appearance of the interface is a function of the Workspace selected and any customization done by the user of that interface. You can create your own layouts and save them as required as a custom Workspace.
What did you select when you used the SaveAsPDF - RGB or CMYK? What joboptions file was specified?
Are you using any OTF Pro level or TTF WGL fonts? Is your joboptions file specifying that all fonts be embedded?

Windows 8.1, secureboot and sleep issues

Similar Messages

Maybe you are looking for