Battery and Sleep issues. Is this "normal"?

Hey guys, ever since day 1 My new MBP has been experiencing the sleep issue where in sleep the battery would lose about 1-2%/hour. I would go to sleep with the battery at 100%, and wake up to only about 87%. Also, when it was new the battery had about 4650 for full charge capacity, now its showing only 4540 after 10 cycles!!! Is this normal? Please help my MBP is less than 2 weeks old I have owned the previous MBP model, and the battery life during sleep was considerably better than this, and also it took less time to charge the battery!
Charge Information:
Charge remaining (mAh): 3463
Fully charged: No
Charging: Yes
Full charge capacity (mAh): 4540
Health Information:
Cycle count: 10
Condition: Good
Battery Installed: Yes
Amperage (mA): 881
Voltage (mV): 12070
*I have also just updated the upgrade to 10.5.6. Will update and report if this will help with the sleep/battery issue.
Thanks for your help!
Message was edited by: Flyhighalwayz

Reset the SMC (System Management Controller) and re-calibrate the Battery then see how it behaves ...

Similar Messages

Windows 10 Upgrade Salellite - Resolving battery and power issues

My upgrade seemed to go smoothly until I tried to unplug my laptop and use it with the battery. It shut down even though it shows that I have 100% charge. It was working fine before the upgrade. When I put my model into the site it says that it is not compatible for the upgrade but otherwise everything seems fine so far except that I cant use my battery. Someone I know suggested that I might need to download a driver but I have no idea which one or if that is the problem. I would appreciate some help with this. I have Satellite C875-S7303. Model # PSCBAU-009005. If anyone knows what I can do that would be so great. Thank you!

Try these suggestions:
Resolving battery and power issues
Note that the article hasn't been updated for Windows 10, but the instructions are generally the same.

PO number and material issued against this PO for subcontracting

How to know the link in between the PO number and material issued against this PO for subcontracting.
I have checked that PO history is not getting updated.
Thanks,

Hi,
We have 2 different scenarios where you can post a goods issue to Subcontract Venodrs.
Scenarios 1: You can post the goods issue against a subcontrac vendor with out referencing the Subcon PO from ME2O, at this stage we will be knowing what is the stock at subcontract vendor but we will not be knowing the issues against which and how much Quantities are posted.
So when we are post goods receipt, then we will come to know the consuption quantities.
Scenario: 2, If we use the delivery concept then we can track the goods issues against the subcon POs.
If you really keen to track the material issued to Subcon vendor against a PO so better use with delivery.
Thansk,
Satya.

My macbook pro running lion will not boot . it stays on the grey page with the cog spinning. I have tried all methods of booting to no avail. I have removed the bottom and taken out the battery and the ram . will this affect my applecare warranty.

my macbook pro running lion will not boot . it stays on the grey page with the cog spinning. I have tried all methods of booting to no avail. I have removed the bottom and taken out the battery and the ram . will this affect my applecare warranty. I had to try myself as I'm overseas for two months and nowhere near any sort of help .

there was a recent software update that seemed to screw HDV up. Do some searching here over the last month or 2 and you'll find a bunch of posts and some possible solutions.
Worst case scenario, do as Shane suggests. But might I suggest you take a look at the user tips section of the forum. there are some great tips on how to prevent these sorts of problems by cloning your startup drive, etc.

My 16 months old MacBook Pro just got out of battery and turned off in the normal way in this cases. After conecting it to the electricity, I turned it on again and then after restoring the sistem went off and its not working anymore!!!

I tried pressing at the same time ctrl shift comand keys to reset it and then when I try to turn it on again it just starts the screen blinks and the hard drive sounds briefly but then it dead, if you close the mac then the light that glows when is sleepeng turns on and the computer gets hot and the fans turns on and it´s stopped when the battery is dead again.
Please help its incredible, it´s my 3 mac and I never experienced this before.

Thanks Sig. The information is here: Anything useful stand out?
Battery Information:
Model Information:
Serial Number:    9G1130CJVD3MA
Manufacturer:    DP
Device Name:    bq20z451
Pack Lot Code:    0000
PCB Lot Code:    0000
Firmware Version:    0201
Hardware Revision:    0002
Cell Revision:    0158
Charge Information:
Charge Remaining (mAh):    5663
Fully Charged:    Yes
Charging:    No
Full Charge Capacity (mAh):    5663
Health Information:
Cycle Count:    59
Condition:    Normal
Battery Installed:    Yes
Amperage (mA):    261
Voltage (mV):    12574
System Power Settings:
AC Power:
System Sleep Timer (Minutes):    10
Disk Sleep Timer (Minutes):    10
Display Sleep Timer (Minutes):    10
Wake on AC Change:    No
Wake on Clamshell Open:    Yes
Wake on LAN:    Yes
Current Power Source:    Yes
Display Sleep Uses Dim:    Yes
Battery Power:
System Sleep Timer (Minutes):    10
Disk Sleep Timer (Minutes):    10
Display Sleep Timer (Minutes):    2
Wake on AC Change:    No
Wake on Clamshell Open:    Yes
Display Sleep Uses Dim:    Yes
Reduce Brightness:    Yes
Hardware Configuration:
UPS Installed:    No
AC Charger Information:
Connected:    Yes
ID:    0x0100
Wattage (W):    60
Revision:    0x0000
Family:    0x00ba
Serial Number:    0x00262704
Charging:    No

Battery and Magsafe issues

I've had my Macbook for about 9 months and I am having issues with the magsafe and battery. If I try to run the computer without the battery installed it shuts down the first time it tries to access the HDD or requires even light use of the processor. In turn, whenever the compuer is plugged in, the battery charge hovers at about 95% and is constantly charging. As a result of this, the battery stops working at about 50% charge (The computer just dies mid-task and never goes to sleep) even though my cycle count is only 174. If I were to bring the computer in, could they replace the battery and magsafe since I am still under warranty?
Message was edited by: Dachd43

Seems I failed to read your post carefully the first time - apologies!
First off, try resetting the SMC:
http://docs.info.apple.com/article.html?artnum=303319
If that fails to correct the problems, then you will need to contact AppleCare (or make a genius bar appointment and bring it into an Apple Store). It may be as "simple" as battery+charger, and they may start there, but it may also be an internal hardware issue. It's definitely a hardware issue, though, so you're covered under warranty.

Download, battery, and sleep problems on macbook pro with retina display after upgrading to Mountain lion

After waiting a few days to download OS X Mountain lion, I finally installed it on my new MacBook with retina display a couple days ago. I love the interface and all the new features, but I've noticed some problems I really need to resolve. I'm constantly downloading large files and I noticed thhis change:
Before, on Lion, I could download files from Safari or the Internet and the computer would sleep whenever it was set to on energy preferences and the download would resume. This would let the computer conserve energy so the download could progress further when on battery. Now, I noticed that my computer never goes to sleep! Its set to have the display sleep in 5 minutes and the computer in 15 on both battery and when plugged in, but it never does either. I don't know if it has to do with the fact that power nap is on even when using battery. So now the Mac is constantly on when downloading something and instead of downloading a one gigabyte file that would take up 15% of my battery, it takes up 60% since it never sleeps. When I tried downloading something and then manually putting the computer to sleep, the download was interrupted and it said Wi-Fi connection lost so I have to start the download over again.
That's basically all three problems in one situation. I even put the brightness all the way on low so the screen is black when downloading, but it still uses up much more battery than before. Can someone help find a solution?

Did you try turning off power nap?

I have a battery and Memory issue - late macbook pro 2011

Macbook Pro 13" Late 2011 Model
Battery Issue
After upgrading to Lion, my batter life is 3 hours after full charge. It was 7-8 hours in leopard.
Hoping this is a common issue and someone has a quick solution.
Memory Issue
I had 4GB Ram and found it would run to virtually nothing and not free any inactive RAM. I though the solution to this was to buy more RAM, which I did.
I now have 8GB RAM and it agains runs to virtually nothing on non labour intensive software like safari or mail. It doesnt free up any RAM when it reaches a certain point. Instead it freezes and I'm forced to restart the computer. I use Final Cut Pro X and Photoshop/Illustrator fairly regualry. I'm assuming the RAM is is used with those but even when these are closed the RAM is low.
Any ideas?
Cheers

You should take your Mac to an official apple retail store, as it is not common to have these problems regarding battery and memory.

Windows 8.1, secureboot and sleep issues

Hi,
I'm a technet subscriber so have access to Win8.1. Just tried it and ran into some issues which I think are bios related. (My motherboard is X79A-GD65 (8D) and I'm running bios 4.3.)
First when I installed Win8.1 a watermark is stuck on the desktop which says "SecureBoot isn't configured correctly" along with the build number, 9600.
So I went to bios and saw Windows 8 settings and enabled them, now the watermark is gone but there is not sleep option in windows (which I use alot)
going back to bios and disabling Win8 features brings sleep back but also the secureboot watermark......
Anyone else run into this?

I can't help with the SecureBoot issue. I have the same problem with my videocard not being SecureBoot compatible (A GTX 670). The sleep issue though, is it an issue with like... you can only hibernate, but you can't sleep? Windows 8 didn't come with that for me, but I found a work around.
Open a command prompt with administrator privilege and type: powercfg /hibernate off
This should change the hibernate to sleep.
If you want an icon for it just make a batch file: rundll32 powrprof.dll,SetSuspendState (0,1,0)
And if you need a timer on it (I use this pretty often myself) use this: powershell sleep <seconds> | rundll32 powrprof.dll SetSuspendState (0,1,0)
And if you're curious about the (0,1,0) thing. It's all boolean, so 1 or 0. (A,B,C), A: Hibernate, B: Critical (in XP/2003 it forces the sleep, but in newer versions it asks for permission to suspend), C: Disable wake event (Wake on LAN would be disabled if this were 1, for example).

Battery and power issues in T43

Hi!
I have a 2005 Think pad T43, that for the last month won't charge the battery. It is connected and the battery indicator light is on, but the battery keeps going down when plugged in to AC adapter. It was able to charge when I reset the battery soon after I first noticed this problem, but after that was finished, the problem remains. I then proceeded to use my computer with the battery removed and connected to the AC adapter. This worked for about 2-3 weeks until it suddenly turned off without warning. I turned it back on, it started to boot, then turned off again. I tried putting the battery back in, which succeeded in booting my computer, but then the battery died. I tried taking out the battery, unpluging it, and holding down the power button, but that did not help. My computer would turn on for a few seconds each time I turned it on, then would turn off. Now, it won't turn on at all, not even an indicator light. When the battery is in and it is plugged in, the battery indicator light is on. My battery and AC adapter are about a year old.
I really don't want to buy a new computer but realize I might have to if I can't inexpensively fix this one. Any help or advice would be much appreciated.
-Laura
Message Edited by led2009 on 04-17-2009 01:47 PM

BUMP
I have the same problem.
The

Wake up and sleep issues in Mac OS X 10.5.8

Hi,
Sometimes, after being sleeping for more than a day, when my macbook wakes up it suddenly sleeps by itself (after 15-45 seconds of using).
Usually I close the lid and wait 30 seconds. After this, I open the lid and the problem is solved. But, when it doesn’t happen I have to restart the computer (what is happenig more and more often). Does anyone know what is happening?
As I read in some posts, there are some bugs in Mac OS X 10.5.7 related with wake up and sleep problems. Does anyone know if these bugs remain in the 10.5.8 version? How is it possible to fix this problem?
Thanks,
Luiz Goldoni

Try a SMC reset.
DALE

Firefox comes up with a split screen, left and right. Is this normal? (I don't like it, and would prefer to have only one pane open upon logging in.)

Firefox comes up with a split screen, the right side of which is the one I want to retain as the only opening window (blank), and the left side of which (a sign-on page for a favourite site) I would like not to have sitting there. Is this normal? Or did I somehow (erroneously) make it happen? How can I get rid of the left pane so that only one pane (the right, 'blank') appears when I log on to Firefox?

Opening in the Sidebar is the default action for bookmarks that are created via a "Bookmark this Page" link or button on a website. Make sure you use the many "Bookmark this Page" methods that are in Firefox instead.
Right-click that bookmark and select '''Properties''', then un-check the preference for '''Load this bookmark in the sidebar''', and then click Save.

1st generation MacBook, battery and Leopard issues; looking for help please

I have a 1st generation MacBook that started having battery problems immediately after installing Leopard. it was the same issue many others have complained about; battery life shortened and shutting down while on battery power with no warning. I have never had that problem while using Tiger. I experienced this with both 10.5.0 and the stand alone upgrade of 10.5.1 using an erase and install method.
(BTW, as a side note: I'm religious about calibrating my battery every month and use a program called "CoconutBattery" to document the results. Prior to Leopard, the battery measured 97-99% capacity. Three days after Leopard was installed it was time for another check, the result was 74% capacity.)
I had a clone backup of Tiger and immediately restored my MacBook, but the problem followed Tiger. I have Applecare and called support. Both myself and the tech found it rather hard to believe that the battery just suddenly failed coincidentally after the Leopard install. We went through the regular things; SMC reset, firmware checks, diagnostics, repair permissions, etc.
We believe it has to do with the Battery Updater package. I had gone between both versions of 1.2 and 1.3, but the problem remained with both Tiger and Leopard. The tech decided to send me a new battery (it's on the way) and I wish to try installing Leopard again. As long as I have my cloned Tiger image, all I have to lose is my time, but hopefully, not another battery! I would honestly like to get Leopard running on this machine.
But... here's my question. In reading through these discussions in both the Leopard and MacBook forum, there doesn't seem to be any consensus of which BatteryUpdater package to use. The Apple tech honestly told me he didn't know. Also, if the BU package "writes" to the battery (which it states it does), can it be downgraded once v1.3 has been installed? I mean, should I leave the battery out, install Leopard, then manually update BU to v1.2 before installing the battery (if possible)? I do plan on testing the new battery with my Tiger install, just to verify it is working as it was before.
There are a lot of people here claiming to be knowledgeable about Leopard, never had any problems with a variety of machines, etc, etc, so I would appreciate your input. Please don't speculate, but if you're using a version of BU that works with Leopard and your 1st Gen MacBook, I would appreciate you telling me about it. I have tried to document and methodically relate everything I've done so far, but if you need additional information, just let me know.
I noticed Leopard had installed BU v1.3 when I checked it, so it must use that as default, since I noticed Tiger had v1.2.
OR, am I way off base on this? Can anyone think of another reason I may have had this problem? Am I barking up the wrong tree by concentrating on the BatteryUpdater package? Is it possible all these batteries are failing under a Leopard install maybe due to some unknown reason?
Any knowledgeable advice or suggestions are welcome, thanks!

Well, Ding Dang y'all... it appears the battery was the culprit. I received my replacement battery from Apple and followed the same steps and everything seems to be working fine.
It sure was strange that the battery started this problem immediately after Leopard was installed... I don't know what to say about that, unless BatteryUpdater v1.3 started the chain of events.
In case it helps someone else, here's exactly what I did (rebooted through each step):
- Backed up data; unauthorized computer from iTunes
- Erase and install from the Leopard disc, while keeping the old battery in
- Installed Leopard, did software updates except for delta 10.5.1 update
- Applied combo update of 10.5.1 from separately downloaded file
- Found BatteryUpdater Bundle (BU) of v1.3, moved to trash, rebooted
- Ran software updates, BU v1.2 was found and installed
- Then, swapped out battery to new battery
- Tested unit, seems to be okay now, no shutdown issues, battery runtime seems normal
Thanks to all that had advice and suggestions. It was enough to get me to try it again. Now, I have two more machines to upgrade, since these are production machines, I'll probably wait awhile. But, having this is a real treat.
Have a great holiday everyone!

External display and sleep issues

A 15-inch MacBook Pro worked fine with an external display and keyboard prior to the 10.5.2 update. After the update the external display goes dark when the laptop is closed. Hitting the external keyboard momentarily wakes up the external display but then it almost immediately goes back to sleep. It's as if the MBP thinks it's in battery mode and not plugged into an AC outlet.
All Energy Saver settings are to keep the display awake. Could this be a corrupt driver or some other issue?
Thanks.

Theres been a lot of disscussion about this and it's a BIG problem. Check this out:
http://discussions.apple.com/thread.jspa?messageID=6597635&#6597635
http://discussions.apple.com/thread.jspa?messageID=6669894
A lot of us are having the following problems after the graphic update:
-not waking from sleep (waking, but display staying dark, restart is only solution)
-not being able to use in clamshell mode (with external monitor)
-not being able to run external monitor at full resolution
I've also had some weird bugs like the settings and calibration of my external somehow coming over to my MBP monitor after disconnecting the them.
I hope Apple can fix this.
Tim

Battery and WiFi issues after upgrade to 1.1.1?

Since my upgrade to 1.1.1, my iPhone has had HORRIBLE battery life. I charged it all night last night and it is only almost noon, and I have not used it much at all, and it is already DEAD. It forced shutdown just now.
Another issue that I have been having is the phones lack of ability to find any wireless networks without first rebooting the phone.
I have done a full restore on the phone as well as a restore without restoring from backup, and the results have been the same.
Has anyone else had these issues?

REPLY TO ALL OF OF YOU AND REALLY WONDDERING WHAT MAY HAVE HAPPEN. I CAN REALLY TELL YOU WHAT HAPPEN. I MYSELF AM FROM MIAMI FLORIDA. I AM NOW IN LINCOLN NE. WELL ONE DAY WHEN I WAS AT THE HOTEL I DROPPED SERVICE. WELL AT THE TIME THAT I DROPPED SERVICE IT WAS BECAUSE OF A RAIN/THUNDERSTORM IN THE AREA. SEEING THAT I WAS IN LINCOLN NE AND THE NEARSET TOWER WAS IN OMAHA NE I STILL LOST SERVICE. WHEN AND I SAY WHEN YOUR PHONE LOOSES SERVICE IT SERCHES FOR SERVICE ALL THE TIME. EVEN THOUGH YOU LOOK AT YOUR PHONE AND IT SAYS NO SERVICE IT IS STILL LOOKING. THIS TIME IM TALKING ABOUT IT LOOKED FOR SERVICE FOR ABOUT 4 HOURS AND IT DIES NOT LONG AFTER THAT BUT IT SAID NO SERVICE THE ENTIRE TIME

Battery and Sleep issues. Is this "normal"?

Similar Messages

Maybe you are looking for