Windows 8.1 upgrade from Win8. Explorer crashes at startup.

After upgrading from Windows 8 to Windows 8.1, explorer.exe often crash (but only the first time I start it) with an error which looks similar to this:
Nom de l’application défaillante Explorer.EXE, version : 6.3.9600.16441, horodatage : 0x5265dec8
Nom du module défaillant : ntdll.dll, version : 6.3.9600.16408, horodatage : 0x523d5305
Code d’exception : 0xc0000006
Décalage d’erreur : 0x0000000000053bf8
ID du processus défaillant : 0x1780
Heure de début de l’application défaillante : 0x01cef11e8f8eec96
Chemin d’accès de l’application défaillante : C:\WINDOWS\Explorer.EXE
Chemin d’accès du module défaillant: C:\WINDOWS\SYSTEM32\ntdll.dll
ID de rapport : d23b5792-5d11-11e3-bf33-028037ec0200
Nom complet du package défaillant :
ID de l’application relative au package défaillant :
As suggested in an other thread, I've imported the reg file WER_Explorer_full.reg which created a dump
file (you can find it here: http://goo.gl/XlkfXU)...
I tried to analyse it myself but without success (faulting ip is ntdll!RtlpWalkFrameChain+2f ???).
Is there any solution?

Hi,
I found this TortoiseGit which caused the crash.
ERROR: Module load completed but symbols could not be loaded for TortoiseGit.dll
TortoiseGit - The coolest Interface to Git Version Control
https://code.google.com/p/tortoisegit/
Please remove it to see if the issue still persists.
Kate Li
TechNet Community Support

Similar Messages

I am trying to license my recent download of Lightroom 5 onto my recently purchased Macbook with the serial number of the disk I purchased last year for my Windows PC (an upgrade from Lightroom 4). I receive an error "The serial number you entered is inv

I am trying to license my recent download of Lightroom 5 onto my recently purchased Macbook with the serial number of the disk I purchased last year for my Windows PC (an upgrade from Lightroom 4). I receive an error "The serial number you entered is invalid". Why does CC not recognize this as a valid serial number?

Soyouca how did you install Photoshop Lightroom? Please uninstall the current installation using the uninstaller located in Applications/Utilities/Adobe Installers.
Once Photoshop Lightroom is removed please download a fresh copy of the installation files from Adobe - Lightroom : For Macintosh. The update contains the full installer so please download the latest version of Photoshop Lightroom 5.
You may be asked to enter your serial number for Photoshop Lightroom 4. You can find information on how to locate the serial numbers under your account at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

My Lightroom kepps stopping just after being loaded. My Lightroom is 5.4 64 bits installed on a Dell PC with Windows 8.1(upgraded from 8). I have uninstalled Lightroom and re-installed it with the same result. What could be the problem?

My Lightroom kepps stopping just after being loaded. My Lightroom is 5.4 64 bits installed on a Dell PC with Windows 8.1(upgraded from 8). I have uninstalled Lightroom and re-installed it with the same result. What could be the problem?

Try resetting your preference file next: http://www.lightroomforums.net/showthread.php?14226-Resetting-(or-Trashing-)-the-Lightroom -Preferences-file
It survives an uninstall/reinstall.

I installed iTunes on my Windows 7 PC and now Internet Explorer crashes and won't run.

I installed iTunes on my Dell PC running Windows 7 and now Internet Explorer crashes and won't run. Are there any known conflicts, or likely issues that may be causing this?
I've rebooted, and the iTunes program seems to operate fine. I used it to upgrade my iPad's OS to 8.1.3.

They aren't related and shouldn't affect each other.

Officejet 8620, fail to print, windows 8.1 (upgraded from windows 8)

I have spent many hours trying to resolve an issue on a Dell Vostro laptop, that was upgraded from Windows 8 pro to Windows 8.1 pro and has the latest updates installed. When printing, the print is delivered to the print spooler, it is there momentarily, then disappears. Nothing is delivered to the printer, and no activity is observed at all on the printer. This is on 2 different 8620 printers. I am able to install and print to a laserjet M1217mfp from the laptop with no problems. A different machine that was loaded directly with windows 8.1 prints perfectly to the 8620 printers.
I have tried the following with no success:
1) Install from original HP 8620 installation CD
2) HP Print and scan doctor - remove the print driver and download latest software . ( 3 times)
3) Manually deleting all printers, Stop spooler service, delete print driver from Print Server Properties, uninstall all HP software, reboot and install from latest print driver OJ8620-198 downloaded from this link: http://ftp.hp.com/pub/softlib/software12/COL51217/bi-124140-4/OJ8620_198.exe
4) Same procedure as step 3, including stop spooler, rename C:\Windows\System32\spool\drivers\x64\3 to C:\Windows\System32\spool\drivers\x64\3.old. Reboot and install from latest driver as above.
5) Run level 4 on HP Officejet Software and Driver Removal Utility from the link below and reinstall : http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=za&lc=en&softwareitem=mp-110134-1
6) Same procedure as step 4, as well as removing printer registry keys in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows x64\Print Processors except "winprint" key. Delete all HP folders in C:\Program Files\HP. Reboot and reinstall latest driver.
7) Follow the manual procedure described in Microsoft KB2987964 "Cannot print by using a Hewlett Packard XPS-based print driver after you install KB2769165" http://support.microsoft.com/kb/2987964 Version of hpbxpsrender.dll is 0.3.7600.16385 consistently through all of the steps listed.
9) Create a new local administrator account on the laptop. Follow the procedure in Step 6.
The issue seems to be that the spooler discards the print immediately and it also seems to be related to the upgrade from windows 8 to Windows 8.1 but only for Officejet Printers. The only option I have not tried yet is to format and reload the machine with Windows 8.1 Pro, but this is a drastic step to resolve a problem that should be resolved by HP based on the many reports posted on the Internet by users experiencing this issue on OfficeJet printers.
What can be done to resolve this?

Hi @Electronza ,
Thank you for providing all the detailed steps you have already tried to resolve this issue. I would like to help you out today.
I have provided a document with some steps for the Print Jobs Disappear from the Print Queue and Do Not Print (Windows 8). Go to Step 4: Rename the HPBXPSRENDER.DLL file, since you have already tried the other steps.
Please take a look at this document from my co-worker, if the issue persists. The driver installed might be the Class Driver and not the HP Full Feature drivers. Missing or partial print issues on Windows 8 / 8.1.
Please provide in detail the results if you are still having issues.
Have a great weekend!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Insufficient Hard Drive Space in Windows 7 after upgrading from XP Bootcamp

I just upgraded from windows xp to windows 7 via bootcamp with success; however, I find the hard drive space diminished. I originally had 32gb partition for xp and continued to use that allocation space since my macbook pro has about only 120 gb total space. I never checked how much space I had from the beginning but now after I installed several applications such as norton, skype, yahoo messenger, etc., I have about 1 gb left free looking at "my computer". I've looked around and found that the minimal requirement for windows 7 is 16 gb. That does not make sense that I have 32 gb and am now left with just 1 gb with just basic programs installed and I do mean basic; no huge programs since I just use my mac as a "leisure" laptop. Please help! I tried googling and looking for answers in discussion boards and can't find an answer.

I don't ever recall seeing 16GB in all my reading. Okay, yes for 32-bit but that really seems... misleading unless Home Basic.
http://www.microsoft.com/windows/windows-7/get/system-requirements.aspx
As for how large, depends on a number of things like how much RAM, page file, hibernation, temp files, etc. More for 64-bit than 32-bit. The amount needed for rollback drivers, restore points, should also be taken into account. Thumbnails and cache, too.
I use 64-bit version, consumes 65GB, and I really don't have much, and all my data, installers and updaters and such are kept on another hard drive, not the system drive.
At least you can't normally "upgrade" from XP to 7, you have to do a custom clean install so you shouldn't have anything left behind or in Windows.old
I wouldn't install Norton. MSSE is fine, all you need (I did use beta's of Norton 360 v.3 and others too).
http://www.microsoft.com/Security_Essentials/

No sound after Windows 10 free upgrade from WIN7 on G71-340US laptop with IDT CODEC.

After free upgrade from WIN7 to WIN10 my laptop no longer has any sound (with internal or external speakers). I have tried uninstalling IDT driver and allowing Windows 10 to reinstall the driver through scan for HW changes - still no sound. I would appreciate any guidance or fixes for this problem. Thank you.

I am happy to report I now have sound on my G71-340US laptop. After further trial and error troubleshooting I found that there is an app called IDT PC Audio (aka IDT HD Sound) installed on my laptop by HP (OEM) I think. While I'm not exactly sure what this app's function is it appears it is related to activating IDT HD Codec drivers functionality. Somehow I decided to look in Task Manager - Startup and saw this IDT PC Audio listed. I clicked on disable and then a minute later clicked on enable. After I did that, as simple as it appears, I now was able to hear sound both on internal and external speakers. This is the first time I heard any sound since upgrading to WIN10. I have checked it several times by re-booting my laptop and each and every time I now have sound. I'll continue to test this through the week and see if it continues to be OK. Meanwhile, I thought I would share this potential fix (or workaround) with all concerned. Perhaps others will find this useful and provide me your feedback. Keeping my fingers crossed! PS. BTW, if anyone out there knows what IDT PC Audio is by all means share your knowledge. I am curious why this app doesn't appear more often in the forum posts and how it may relate to the WIN10 upgrade. Sorry, but I don't recall what prompted me to look at Task Manager - Startup but I'm glad I did. It's great to hear sound again!

I am stuck in Windows 8 after upgrading from XP sp3.

I upgraded while in windows not thinking. I now realize I should have used bootcamp assistant (although Win 8 is not supported).
My problem is I can't boot back into mac os. I hold down the Alt. key during start up but no luck. I can't find any start up disk options in windows.
Intel Imac 10.8
Thanks for any help.

I don't ever recall seeing 16GB in all my reading. Okay, yes for 32-bit but that really seems... misleading unless Home Basic.
http://www.microsoft.com/windows/windows-7/get/system-requirements.aspx
As for how large, depends on a number of things like how much RAM, page file, hibernation, temp files, etc. More for 64-bit than 32-bit. The amount needed for rollback drivers, restore points, should also be taken into account. Thumbnails and cache, too.
I use 64-bit version, consumes 65GB, and I really don't have much, and all my data, installers and updaters and such are kept on another hard drive, not the system drive.
At least you can't normally "upgrade" from XP to 7, you have to do a custom clean install so you shouldn't have anything left behind or in Windows.old
I wouldn't install Norton. MSSE is fine, all you need (I did use beta's of Norton 360 v.3 and others too).
http://www.microsoft.com/Security_Essentials/

Firefox and Internet Explorer crashes on startup

Firefox and Internet Explorer both crash at startup. I have tried resetting Firefox but it still crashes. I click on the details box and nothing happens. They will both work fine when I boot up Windows in safe mode.
bp-564f7898-b699-45de-83c6-5c8912130324

Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://hacks.mozilla.org/2010/09/hardware-acceleration/
Try to update the graphic display driver.
*https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers

Uploaded a recent upgrade and now photoshop crashes on startup any suggestions?

Having problems with new upgrade to photoshop cc. Crashes on startup, any sugestions?

Hi Christopher,
Please refer to the help document below to fix the issue:
CC applications close immediately after launch
Regards,
Sheena

Brand new iMac, Aperture installed from Mac AppStore crashes on startup

I installed Aperture 3.0 from the Mac AppStore yesterday, but it crashes immediately on running, with this message:
Dyld Error Message:
Library not loaded: /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager
Referenced from: /Applications/Aperture.app/Contents/MacOS/Aperture
Reason: no suitable image found. Did find:
/Library/Frameworks/PluginManager.framework/Versions/B/PluginManager: no matching architecture in universal wrapper
I bought my iMac a few days ago. There's a few apps installed, including Final Cut Express 4.0 - installed from CD - which given all the other threads I've read with the same crashing message, may make a difference.
I used the Aperture troubleshooting basics (http://support.apple.com/kb/HT3805) - let me explain each step.
- I just bought my iMac, brand new last weekend, if it doesn't meet system requirements I'll eat my hat
- It wasn't the first thing I tried, but I have since run a "Software Update" which included updates for both Final Cut Express and Aperture... after they installed, I rebooted and Aperture still crashes on startup with the same message
- The Aperture first-aid-tools are irrelevant I'm afraid. If I didn't know any better, I'd say they didn't work at all - as holding Option/Command while starting Aperture makes no difference... but I suspect the crash happens before the tools get a chance to run
- Time Machine backups would also be irrelevant since this is a fresh install (what does "Restore the Library" mean anyway - what library?)
- Restoring Aperture back to its original settings is irrelevant since I haven't changed any
- I tried reinstalling Aperture, exactly as described. I deleted Aperture from Applications, went to the Mac AppStore and redownloaded it; rebooted; it still crashes in the same way
Here's more of the message below... and yes, as you can see, I've tried more than 50 times ;-(
If I have to reinstall the OS, I might just as well get a refund. I'd love to solve this, but I seriously hope reinstalling the OS is not required.
I just spent 3 days solving an issue where I couldn't download any apps from the AppStore at all, so please let me sell an iMac to my mother without explaining how long it takes to download 1 app and get it running on a brand new machine !
Interval Since Last Report: 218019 sec
Crashes Since Last Report: 51
Per-App Crashes Since Last Report: 47
Anonymous UUID: E1A91A1E-F665-4A88-8101-7D4D60A61D89
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager
Referenced from: /Applications/Aperture.app/Contents/MacOS/Aperture
Reason: no suitable image found. Did find:
/Library/Frameworks/PluginManager.framework/Versions/B/PluginManager: no matching architecture in universal wrapper
Binary Images:
0x7fff5fc00000 - 0x7fff5fc3bdef dyld 132.1 (???) <486E6C61-1197-CC7C-2197-82CE505102D7> /usr/lib/dyld

I believe the second half of the solution addresses what you are experiencing. You don't have to re-install the OS, just try the 10.6.6 combo update:
http://support.apple.com/kb/TS3528

Windows 8.1 upgrade from windows 8

I am unable to upgrade to windows 8.1.
When trying to update it is showing 'Something happened and windows 8.1 couldn't be installed. Error Code 0x8024401c
I tried 'net stop wuauserv' and 'net stops bits' from command prompt with admin privileges. Still same error.
Please provide the solution.

Hi,
This error means that your PC couldn't connect to the Windows Update servers.
Please try this Windows update troubleshooter:
http://go.microsoft.com/?linkid=9830262
Then, if there is any third part security applications, please disable it or remove it to check the results.
Also, we can try the update in Clean boot mode to avoid 3rd part conflict:
How to perform a clean boot to troubleshoot a problem in Windows 8, Windows 7, or Windows Vista
http://support.microsoft.com/kb/929135
Kate Li
TechNet Community Support

Has anyone encountered a Microsoft Visual C++ Runtime error in Windows 2000 when upgrading from Labview 6.0i to 6.0.2?

When I try to upgrade Labview 6.0i to 6.0.2 by running the setup.exe file I downloaded from the NI site, I immediately get a dialog box with the header "Microsoft Visual C++ Runtime Library" and it says "Runtime Error! Program: C:\setup.exe abnormal program termination."
I'm running Windows 2000, but I've successfully installed it on another computer with the same setup. I'm guess some of the DLL files in system32 has been corrupted or mismatched versions. But I don't know which one...
Anyone know what this means?

Hello,
You can probably solve this problem by going to Start >> Run and typing the following:
Regsvr32 \msi.dll
Where is the folder where the msi.dll file resides on your computer (you can use Start >> Find to find the exact location). Once you do this, the installation of the 6.0.2 update should work properly.
Please let me know if you continue to have any problems. Thanks for your patience on this issue, and have a pleasant day.
Sincerely,
Darren Nattinger
Applications Engineer
National Instruments
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Bug Windows 8.1 upgrade from Windows 8 - Parental Control - Shift in Caldendar

Hi,
since I have upgraded the PC of my son from Windows 8 to Windows 8.1,
I have discovered a bug regarding the parental control features.
Everything was working fine in Windows 8.
In Windows 8.1, the software has a shift regarding the settings for opening hours.
For instance if we are Monday, it will apply the settings of Tuesday.
The clock and calendar is obviously properly set
Is anyone has seen the same issue ?
any fix ?
Best Regards
John

Hi,
PLease check if your PC region is consistent with the real region.
Then recreate the child account for test.
If it works, please re-apply these settings.
Karen Hu
TechNet Community Support

Need to upgrade from Internet Explorer to Firefox

I'm running Internet Explorer 5.2 for Mac, and downloaded Firefox 2.0.0.2, but when I try to install it, I get "Image name: Firefox 2.0.0.2--Image format: UDIF read-only--Checksum: CRC32 $6DBEAAAF INVALID---Unable to verify "Firefox 2.0.0.2.dmg"
In the "Open with App" box, under "to open UDIF device", I get "Disk Copy 10.1--created with: "not available"
If I disable the checksum, I can get the Firefox logo to appear, but when I double-click on it, a box appears saying "Firefox has unexpectedly quit"
Possibly the download was incomplete, as I have to use a dial-up where I'm lucky to get 28.8K, but it said "complete"
Am I doomed to Internet Explorer 5.2 FOREVER?

Welcome To Discussions fabfox!
Have you considered upgrading to a newer version of OS X?
Here is some information, to assist you in that endeavor.
Mac OS X Versions 10.1, 10.2, 10.3, and 10.4, are complete system upgrades that must be purchased.
Once an OS has been installed, the point upgrades, such as 10.1.x to 10.1.5 (Final) 10.2.x to 10.2.8 (Final), 10.3.x to 10.3.9 (Final), and 10.4.x to 10.4.8 (Pending), can be downloaded for free.
Tiger is available for purchase at The Apple Store (U.S.).
Jaguar and Panther, are no longer available directly from the Apple Online Store, as Tiger 10.4.x is the most up to date OS.
If you know what to look for, Jaguar Full Retail CDs, a Full Retail Version, of the Panther Install CDs, or a Full Retail Version, of the Tiger Install DVD, can also be purchased rather inexpensively, at some online Apple retailers, Amazon, eBay, AppleRescue, FastMac, etc.
Be sure not to purchase grey, upgrade or machine specific CDs or DVDs.
Jaguar and Panther are only on CDs, not DVDs.
The discs should look like the images in the above links, unless purchased from AppleRescue.
Additional info in these links.
Using OS X Install CDs/DVDs On Multiple Macs
What's A Computer Specific Mac OS X Release
Software Update, Upgrade: What's The Difference?
Before upgrading to any OS X version, check to see if your Mac needs a Firmware Update.
If one is required, you must start the computer from a Mac OS 8 or Mac OS 9 System Folder on the computer's hard disk, not from a CD, in order to install it.
Once Jaguar 10.2.x is installed, you can use the 10.2.8 Combo Update,
or if Panther 10.3.x is installed, you can use the 10.3.9 Combo Update, to upgrade to the final version of either OS.
If your Mac meets the System Requirements for Tiger, you could also consider installing that.
And then use the PPC 10.4.8 Combo Update, or the Intel 10.4.8 Combo Update.
Jaguar System Requirements
-Power Mac G3 or G4, iMac, eMac, PowerBook G3 or G4, or iBook computer
-128MB of physical RAM
-Supports all video cards shipped by Apple on Mac OS X-compatible systems. Quartz Extreme functionality is supported by the following video cards: NVIDIA GeForce2 MX, GeForce3, GeForce4 MX, or GeForce4 Ti; Any AGP-based ATI RADEON card. A minimum of 16MB VRAM is required.
-QuickTime Pro functionality requires a QuickTime 6 Pro key. The QuickTime 5 Pro key will not work after this software is installed.
-DVD Player requires a DVD-ROM equipped Macintosh with built-in FireWire.
Panther System Requirements
Additional Panther System Requirements
Tiger System Requirements
Additionally, "Tiger ships on a DVD, but if your Mac doesn’t have a built-in DVD-ROM player, you’ll need CD media. When you buy Mac OS X Tiger, you qualify to purchase Tiger CDs for only $9.95."
Download the Media Exchange Program Order From Here.
Orders must be mailed by March 19, 2007.
AppleRescue, also sells a Tiger installation set on CD
Shop Carefully, Examine All Documentation, And Good Luck!
ali b

Windows 8.1 upgrade from Win8. Explorer crashes at startup.

Similar Messages

Maybe you are looking for