Windows error 'no hard disk installed'

when i tried to boot up with recovery disc 1 in cd/rom drive i get win 7 error 'no HDD'. AND THE LAPTOP SHUTS DOWN. I HAVE PAVILION DV7-MODEL-LM726AV. THX. KRIS.
This question was solved.
View Solution.

i tried f2. but no errors on hard disk or memory. but both c & d drrives are location 0. how can it be?. thx. kris.

Similar Messages

Window detected a hard disk Problem on my Satellite L505-S5988

Hi,
I have a Toshiba Satellite L505-S5988 with window 7 Home Premium 09 Service pack 1. It is 2+ years old and my hard drive is Toshiba MK3263GSX 287GB. Lately, I got a window warning message as “ Windows detected a hard disk Problem. Back up your files immediately to prevent information loss, and then contact the computer manufacturer to determine if you need to repair or place the disk….. The following hard disks are reporting failure: Disk Name: TOSHIBA MK3263GSX Volume: C:\ “.
Since then, I have imaged my laptop and run malware/spyware softwares, and it looks like my computer is clean. The laptop device manager said my hard drive is working properly. However the warning keeps pops up. I opened Administrative Event Viewer and found the below warning:
“Log Name: System, Source: Disk, Event ID: 52.
The driver has detected that device \Device\Harddisk0\DR0 has predicted that it will fail. Immediately back up your data and replace your hard disk drive. A failure may be imminent.”
EventData
\Device\Harddisk0\DR0
0E00030001000000000000003400048002000000000000000000000000112
D000000000000000000000000
Besides this warning, there are also other errors and warnings back to years ago, such as AFS failed to load, print service… Despite all these errors and warnings, my laptop seems to be running OK. I was not prevented from doing anything that I usually do.
Questions:
Is there a tool I can run to verify that my hard drive is truly bad?
Can any tool further identify where?
Can it be repaired? Reformat? Or I have to replace with a new one?
What options I have if I have to replace with a new one?
What is average cost of it?
Any help will be highly appreciated.

Satellite L505-S5988
Event ID: 52 - Source: Disk
..the warning keeps pops up.
That's good enough for me. I would replace the disk.
You can verify it with the free trial of HD Tune.
-Jerry

Windows 7 on MacBook Pro Retina late 2013. Showing popup window as "Windows detected a hard disk problem"

I have installed Windows 7 64 bit version in my MacBook Pro Retina(13") late 2013 model . It was working fine from last 8 months but recently popup window showing as "Windows detected a hard disk problem" once login. Please check the following image.
I have contacted Apple Support team. They have tested the hard disk while booting from Mac OS and all the reports showing as hard disk is fine. Then I thought might be it was some virus and removed the Bootcamp partition and re-installed Windows 7 Operating System. But once updated Windows 7 with latest updates. This message showing again.
Would you please help me out to fix this issue. Anybody faced similar issue?

No I think that all drive are really on failure
I've boot with an ubuntu livecd and smartmontools see also the failure.
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate     0x001a   200   200   000    Old_age   Always       -       0
5 Reallocated_Sector_Ct   0x0033   100   100   000    Pre-fail Always       -       0
9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       -       1872
12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       762
169 Unknown_Attribute       0x0013   253   253   010    Pre-fail Always       -       4003597393408
173 Unknown_Attribute       0x0036   100   100   100    Old_age   Always   FAILING_NOW 12124890467160
174 Unknown_Attribute       0x0022   099   099   000    Old_age   Always       -       7469954
175 Program_Fail_Count_Chip 0x0022   099   099   000    Old_age   Always       -       4989854
192 Power-Off_Retract_Count 0x0012   099   099   000    Old_age   Always       -       31
194 Temperature_Celsius     0x0022   064   064   000    Old_age   Always       -       36 (Min/Max 11/75)
197 Current_Pending_Sector 0x0022   100   100   000    Old_age   Always       -       0
199 UDMA_CRC_Error_Count    0x001a   200   199   000    Old_age   Always       -       0
240 Unknown_SSD_Attribute   0x0022   100   100   000    Old_age   Always       -       0
When I use the Mac disk tools from the startup menu, it see also the problem.
Now the big question is : Why I've this type of issue with 2 MBA and 1 Macbook pro 15".
Their configurations are the same : windows 7 with truecrypt.
Maybe Windows drastically reduces the lifetime of the Apple SSD drive.
The 3 Mac are used for less than 6 month !!!!

Windows Detected a hard disk problem Toshiba Satellite L505-S5988

It has been about 2 months since I had my new laptop and first I coudnt get the flash cards to work so I finally fixed that and now everytime I start windows an error message comes up and keeps coming up every 10 minutes saying:
Windows detected a hard disk problem
Back up your files immediately to prevent information loss, then contact computer manufacturer to determine if you need to repair or replace the disk.
-> Start the back u process
-> Ask me again later
Show details
Which disk is failing?
The following hard disk are reporting failure:
Disk Name: Toshiba MK3263GSX
Volume: C:\
Please tell me how I can fix this because I called Toshiba support and the guy couldnt even figure out the drivers name for flash card.
Toshiba Satellite L505-S5988
Thanks

your hard drive is failing. you need to do what it says. back up everything and then either call toshiba to have it replaced under warranty or buy a new one and change it yourself. this is where all of your info and files are saved so if it fails without you backing it up you lose everything.
-civicman4-
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post all info about your laptop and version of windows. We are working on it but still do not have the powers to read your mind.

Setup did not find any hard disks installed in your computer

OK, I spent about 30 minutes looking for a solution to this and haven't found anything. I'm too lazy to keep looking, and I need to get back to work...
Setup info:
-Mac Pro (Early 2008)
-Dual 3.2Ghz processors
-32GB RAM
-RAID Card with four 1TB drives attached (RAID 5 with two volumes: one Mac OS X 10.5.3 and one Mac OS X Server 10.5.3)
-320GB SATA drive that originally came with the unit in hard drive bay 1, now installed in the 2nd optical drive bay and connected to the 5th internal SATA port. It's partitioned with BootCamp: 32.88GB for Mac OS X 10.5.3 (installed and running, used to create the BootCamp partition) and 264.71GB available for Windows.
Windows install disc:
Took my Windows XP SP1 install disc and used nLite to slipstream SP2 and SP3 and burn a new install disc.
When I boot into the Windows install disc, everything goes fine, until it actually gets to the part where I should be selecting my hard drive (Hit Enter to Install Windows) for installation. Instead , when I hit enter, I get the message that "+Setup did not find any hard disks installed in your computer. blah, blah, blah, hit F3 to restart.+"
I'm assuming this is a SATA issue and that I need to get a SATA driver slipstreamed into my install disc so that the Windows installer will see the SATA drive.
Any suggestions on how to proceed?

Everything I've read says that that won't work because I have the RAID card.
Sounds like I'm out of luck, if BootCamp can't be installed on a SATA drive not connected to one of the original 4 bays.
Also, I'm concerned about taking the RAID drives out (I'd have to take all 4 out or it corrupts the RAID setup when I stick the one back in) then putting them back in and having everything return to an All Good status.
Message was edited by: chadcole26

Cq57 error msg hard disk 1 quick 303

My start up memory test passes yet i get error msgs "hard disk 1 quick 303" and "hard disk 1 smart 301" . I ordered recovery disk since mine did not work yet they also do not work. The new installation stops at 23% and I get a pop up that states " Reducer copy file fails from D:\PRELOAD\Base.swm to: C:\RM\Image\Base.swm. Can any one help me or know if I must have a new hard drive?

Hi,
The 301 and 303 error codes would indicate that the Hard Drive is failing and needs to be replaced. This is also consistent with the recovery issue.
If your notebook is still under warranty, contact HP and arrange to have the drive replaced - you can check your warranty status Here.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
If you are out of warranty and would like a guide on replacing the Hard Drive yourself, please let me know - include the full Model No. and Product No. of your cq57 series notebook - see Here for a further explanation.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

90DATK-6G96PE-MFGKOK-6OX103. i got this error on hard disk 1. any advice?

90DATK-6G96PE-MFGKOK-6OX103. i got this error on hard disk 1. any advice?
This question was solved.
View Solution.

Hi,
This is from DST test with Failure id message. This message simply means the HDD is dead. One option: replace the HDD.
Sorry.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

My iMac is from early 2009. Should I have a new hard disk installed to prevent disk failure?

My iMac is from early 2009. Should I have a new hard disk installed to prevent disk failure?

Having a good backup strategy is the best way to prevent data loss.
see > http://www.macworld.com/article/1156643/how_i_back_up_frakes.html
That way if and when your internal hard disk ever does fail or you just what to upgrade your Mac to a larger hard drive, you have a good backup on a external hard drive to recover from.
Personally I use Carbon Copy Cloner and keep current bootable backups on several external hard drives. That way I can either boot up and run or restore from them in case something ever happens to my internal hard drive.

MSI B85M-G43 can't install Windows 7. Hard disk not detected.

Hi,
I just built a new computer for the first time. I followed the instructions and did everything correctly. but am unable to install Windows 7 Ultimate 64bit. Hard disk isn't always detected during the installation.
But when it appeared in the "Where do you want to install Windows" list along with system, I tried to format the hard disk and got a message "Failed to format the select partition. [Error 0x80070057]."
Then I restarted the computer, the hard disk no longer displayed in the list, so I put motherboard driver disc and clicked on Load Driver and opened Storage\Intel\PCH_12.0\f6flpy-x64. It loaded, then I got a message saying "To continue installation, use the Load Driver option to install 32-bit and signed 64-bit drivers. Installing an unsigned 64-bit device driver is not supported and might result in an unusable Windows installation."
I restarted again and disabled Driver Signature Enforcement, but it didn't help. I still got the same message.
In the computer case I have these devices:
- MSI B85M-G43, Socket-1150
- Intel Core i5-4430 Processor
- Corsair Vengeance DDR3 1600MHz 8GB
- MSI GeForce GTX 650Ti BOOST 1GB
- Cooler Master GX 550W PSU
- WD Desktop Green 1TB
- SuperMulti 16X DVD(+/-)R/RW 12X RAM (+/-)R DL LightScribe SATA drive
Everything is plugged in correctly. Hard disk connector plugged in SATA 1 and DVD -> SATA 2.
The installation is pretty slow, regardless if i install it via USB or x16 DVD. All except DVD and hard disk are disabled. It's also worth to mention that even DVD and USB aren't always detected in the click BIOS.
So I'm wondering if anyone here can help me? Thanks

Hi and
1: What BIOS version you have? .. Have you tryed to downgrade/upgrade it already?
2: Have you tryed it in those SATA 2 ports? ...is it same strory?
- On SATA there aint any master or Slave like on IDE so if you are under same controller it dosent mutter what port you use on what device.
Note: SATA 3 Ports are faster then SATA2 ports, but even SATA 1 can handel your DVD or HDD. So no lose if you need to use SATA 2 ports.
Hope this get you foward! Cheers Mummy

Unable to install Mountain Lion - S.M.A.R.T. errors My hard disk error?

Unable to install Montain Lion after purchasing form store and download on Mac Pro 13 inch 2.3 Intel i5 OS 10.7.4. When I am presented with install options, my HD option is dimmed and there is a message: "This disk has S.M.A.R.T. errors. This disk has a hardware problem that can't be repaired. Back up as much of the data as possible and replace the disk."

Well that's good advice. SMART errors are only presented when the hard drive is about to die. This is a dire warning.
You should ensure you have a current backup, and then replace the hard drive. You may need to take it into an Apple Store... if it's < 3 years old and you have AppleCare they will probably replace it for you.

Can a T60 (with completely zero-ed hard disk) install a hard disk drive from a CD? Or floppy only?

Hi
Yikes - I am in deep trouble !
Following a virus attack, I have zero-ed my Thinkpad T60's hard disk (using KillDisk), but now when I try to install WindowsXP Pro from a CD, but although it can read the CD and does get so far... it says it cant read the hard disk !
I was hoping to install the correct driver (see below) but now I can't find my floppy disk drive for my T60.
Is it possible for DOS to read off a DVD or a CD?
I have tried to download a file which I am hoping is the correct driver
"Intel Matrix Storage Manager Driver for Windows 7 (32-bit), Vista (32-bit) and XP (32-bit) - ThinkPad"
6iim10ww.exe
www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70477
But without a floppy drive I dont know how to get it into my T60!
Is it possible to put the data onto a CD or a DVD and read from there?
Cheers
Ship
P.S. My machine is a Lenovo/IMB Thinkpad T60 "2007-F4G" with a 74GB hard disk.
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-62928#hdd

Hi shiphen,
please refer to this install instructions.
For further guidance check into this thread.
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

Recurring Hard Disk Error - New Hard Disk

I've been in contact with HP about a recurring problem with my Pavillion g6 - it periodically has blue screen errors and then won't turn on, displaying a "hard disk error". It then refuses to boot up for anywhere between a few minutes to a few days. I sent it in for a repair, it came back with a new display bezel (???). More hard disk errors. I called in and they shipped out a new hard drive for me.
Today I installed the new hard drive. When I tried to boot it up for the first time, I was greeted with yet another hard disk error. I ran a test, it claimed that the hard disk was fine (it used to say that before sometimes too, which is probably why they didn't replace it initially). Powered down, and turned it on again - it started up fine.
Now it is working, but I don't feel any better about it since it had that initial error. Is it normal for a new hard disk to fail right after being hooked up? It was obviously installed fine, as I am typing this post on a fully functioning laptop now. I am tired of living out of a portable drive (it is a lot like living out of a suitcase), so I would appreciate some assurance that the laptop isn't just going to crash again, but it seems to me that the new hard disk isn't going to be my solution.
I have an extended warranty - but I don't have the luxury of time when it comes to mailing it in, as I am a full-time student and use online courseware every day.
This question was solved.
View Solution.

It is obviously not normal to get an error on a new hard drive. Equally obviously, it is not the drive itself. I wish I could calm your fears but I suspect you have some sort of an intermittent connectivity problem with the SATA port on the motherboard. All you can do is keep using it and see if the problem comes back. I might go in and triple check all the screws and connections, but that is just OCD, really.

Cannot Open File explorer, control panel, basically windows linking to hard disk

I cannot open file explorer or control panel, and I have difficulty contacting ppl at microsoft because the site insist I give a product ID. My windows is pre-installed in my hard disk. sigh. can anyone help?

Hi AsusS550C user,
What is your current situation?
Have you tried the suggestions provided by the others?
In addition to the above suggestions, if we could access PC settings, we could take a PC refresh or a system restore.
How to refresh, reset, or restore your PC
Further, if issue still insists, take a try with the following command:
Dism /online /cleanup-image /restorehealth
Reference:
Fixing component
store corruption in Windows 8 and Windows Server 2012
Best regards
Michael Shao
TechNet Community Support

G505s - Windows 7 Installation hard disk drivers

I have purchased Lenovo Essential G505s(59-379862) (APU Quad Core A8 5550M- 8GB RAM- 1TB HDD- 15.6 Inches- DOS- 2.5GB Graph).I am trying to install windows 7, but it gets stuck at "select driver for installation".I cannot skip this screen. I can see the hard disk in the command prompt (via diskpart also). But unable to proceed with the installation since it is not shown.
please help.
Thanks
Solved!
Go to Solution.

hi rahul_kamtane,
In addition to what Solid_Cruver have suggested, can you try the following:
1. Under diskpart, can you type the following:
list disk
sel disk 0 (where disk 0 is the HDD)
clean (this deletes all partitions and re-initializes the disks)
exit
2, When done, reboot the machine, boot from the Windows 7 installer and observe.
If the problem remains:
1. Are you using a bootable Windows 7 USB flashdrive to install Windows 7 / Windows 7 SP1 ?
2. If you're using a Windows 7 USB installer, have you tried both USB 3.0 / USB 2.0 ports?
Let me know how it goes.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

HP G61 Error Message (Hard Disk 301)

Hi,
I get the Hard Disk error 301 and after looking at other forum replies on similar issue, I believe I have to buy an hard disk. Can anyone tell me the actual hardisk I need to purchase for my laptop and link to online procedures to fix the hard disk myself if possible.
Thanks in advance.
This question was solved.
View Solution.

Hi,
You're welcome
All the best,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Windows error 'no hard disk installed'

Similar Messages

Maybe you are looking for