Windows Phone 8X Update Does Not Resolve Problems

Microsoft has published the fixes that are included in the latest update here:
http://www.windowsphone.com/en-US/how-to/wp8/basics/windows-phone-8-update-history
None of these updates are present on my device, even though I do see the version number in my phone's "About" screen that should include these fixes. When will these be available for my phone?

Sometimes it helps to check out the other discussions in this community. https://community.verizonwireless.com/thread/794324

Similar Messages

2.0.1 update does not resolve problems with contacts

I was glad to see there was an update for the iphone 2.0 firmware.
I was pretty tired to wait for 10 sec for my accounts to open.
Unfortenately, problems remain after update, and opening and searching for contacts is embarresing slow

I found out, that if you reboot the phone and don't use any third party applications it stays fast. It only get's slow if you use installed applications, of course that's not what I bought the iPhone for, but I still have hope for the next update. But they shouldn't have to let us wait tooo long...
The source of the problem might be, that while hitting the home button the application is only freezed and so still in memory. After collecting some programs the OS has to swap to make room for the new one.

I-phone device not recognised in i-tunes, but is on windows. All Apple support advice does not resolve problem

My i-phone 3GS with latest operating system is not recognised in i-tunes, howver windows XP does see the device. I have tried all Apple support reccomendations to no avail. There was an error message when last syncing the device with i-tunes, I have uninstalled / re-installed etc and the device is recognised on other PC's i-tunes?

I have the same problem too. My phone wont show on my pc that's why I can't move my photos. But it does show on itunes.
Then I went to device manager and this is what I found. I dont know what to do though.

Windows update does not work after using System recovery disk

I have a Toshiba Satellite c655 with WIndows 7 64 bit Home premium. The hard drive died on it, so I purchased a new hard drive and purchased the appropriate Recovery media from Toshiba. I followed the directions and installed the 3 disks on to the new hard drive. But Windows update does not work I get the following error: Windows update can not currently check for updates, because the service is not running. You may need to restart your PC    No matter what I try, I can not get it to work. And it will not let me install Windows Defender either. Any ideas or help would be appreciated. Thank you in advance for your time on this matter.
Solved!
Go to Solution.

I get errors saying A problem is preventing the troubleshooter from starting.
That makes two similarities to the following thread. Both Windows Update and Troubleshooters fail to work correctly.
   Trouble with reinstall of Win7 64 on a L505-ES5018
The fix was to install a new hard disk driver.
   Intel Rapid Storage Technology
-Jerry

HT204017 Yosemite update does not solve wifi problems

yosemite update does not solve wifi. Apple are as garbage as Microsoft now, but they have the cheek to charge twice as much!,
Apple, you have lost my future business...might as well buy a cheap windows laptop now.

Hello Chutley,
Thank you for using Apple Support Communities.
Depending on what is happing with your Wi-FI connection, the update may or may not resolve your issues. Since updating didn't resolve your issues, you might want to take a look at the following article for additional steps to try:
Wi-Fi: How to troubleshoot Wi-Fi connectivity - Apple Support
Regards,
Jeff D.

Installing ios8.2 does not resolve Google map navigation problem or gps tracking!

Installing ios 8.2 does not resolve Google map navigation problem.

I have tried to install both of them lots of times but in each case I receive the same in my XE.bat file:
Instance created.
DIM-00019: create service error
O/S-Error: (OS 1387) Unable to add or remove a member from the local group because this member does not exist.
Have checked OS 1387 error at Microsoft Support and as possible cause of the problem they give as follows:
This issue can occur if the environment has a disjointed namespace (i.e. the domain has different NetBIOS and DNS names). For example, assume that the domain has a NetBIOS name of "domain.com" and a DNS name of "domain-old.com." When users are added in the Windows UI, they are displayed in the format of domain\ComputerName. However, you notice in the error log that there was an attempt to add a computer account in the format of domain-old\ComputerName. (System Center 2012 R2 Data Protection Manager install fails and generates ID: 4323: "A member could not be added")
Tried to find out my DNS name, but it is impossible because I don't have any domain installed and my machine is not connected to it. Some other blog (Install Oracle 11gR2 on Windows) advices to work with adding my computer account to some non-real windows domain (just for the purpose of resolving the network) as well and reinstall the database then. If I undestand it right I need minimum 2 machines for this. But I own just one, where the server is based and thought that is enough to run the database... no idea ..

Having a problem with Firefox using Hotmail email. Inbox - as checking messages it freezes up or a 1 item window follows cursor and does not allow you to enter

I am having a problem accessing Hotmail email messages via Fireflox server. When I am in the Inbox, reviewing messages, it either freezes up or a "1 item" small icon window follows cursor and does not allow me to enter messages or do anything. Have to log off and start over. Suggestions>?

Can you detect any pattern to it, whether related to messages with attachments, or particular advertising on the page, etc.?
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
1. Clear Firefox's Cache
orange Firefox button ''or'' Tools menu > Options > Advanced
On the Network mini-tab > Offline Storage : "Clear Now"
2. If needed, delete the site's cookies here
While viewing a page on the site, right-click and choose View Page Info > Security > "View Cookies"
(Usually the dialog will refer to live.com rather than hotmail.com, that's normal.)
Then try reloading the page and logging in again. Does that help?

I Ipod class wont play TED and other video podcasts. The genious bar could not figure out the problem. This problem is not isolated to a single computer. Secondly, the convert to ipod version feature in Itunes does not resolve the problem.

My Ipod classic wont play TED, The Grid, Techzilla and other video podcasts (but not all video podcasts). The genious bar could not figure out the problem. Instead, the Apple store gave me credit towards a new classic, which produced the same problem. This problem is not isolated to a single computer. Secondly, the convert to ipod version feature in Itunes does not resolve the problem. Lastly, I tried restoring the ipod to no avail. I've heard this is a video codec problem.

See this extensive older thread on the issue.
https://discussions.apple.com/thread/2813428?start=45&tstart=0
B-rock

Droid X2 2.3.4 OTA update does NOT install on my phone

Hello,
Today, when I checked for software updates in the settings page of my Motorola Droid X2, it said the 1.3.380.en.US is ready to be applied. I downloaded it and clicked on install once download finished.
The phone reboots, shows the logo and the progress bar for installing the update and then shows an exclamatory mark. The progress bar also stops. Then the stupid phone reboots and when I unlock it, it says the update has failed.
This is unacceptable from a smartphone and I am already **bleep**. Firstly, the phone has 10's of issues (music stutters, etc.) and many people complained about it. And Motorola releases this update that is supposed to fix those issues. And now, the update does NOT even install. Why? Please let me know what I am doing wrong. Or is anyone else facing this issue? Do I have a bad phone and should I replace it?
Please help!
A very very frustrated Droid X2 owner.

I can't speak specifically to the DX2, as I have the original DX ... I assume you've tried a Battery Pull ?? Just power it down, remove the battery and leave it out for like 1 minute - reinsert & power up. See if it proceeds with the update ... if not, you'll likely have to do the factory Reset. If you have data on your SD Card that you want to preserve make sure you don't select "Format SD Card" -- or just remove it entirely before starting the F.R. process.
If you take it to Verizon or call them, they will likely walk you through, or do, the factory Reset anyway .. And since you seem to have "10's" of issues, this might be the best path for you to take anyway ... and in fact if it were ME, I would just bite the bullet, allow the Format of the SD Card, and be done with it .. Of course you'll have to re-download all of your FREE apps after doing so. And if you can't get the phone to boot up, that in itself can be a challenge because Market won't know about them after you do the F.R.
So if you decide to do that, I would go ONLINE to MARKET and write down a list of all your Free Apps before starting the process.
Good luck ..
http://community.vzw.com/t5/DROID-X-by-Motorola/Factory-reset-the-what-why-and-how-for-Gingerbread/m-p/544836#M24742

How can I back up ipad on icloud? Keep getting message "There was a problem completing the back up. Please try again later." I have, many times! The trouble shooting info does not resolve the problem.

How can I back up ipad on icloud? I keep getting the message "There was a problem completing the back up. Please try again later." I have done so MANY times! I've followed the instructions ( I believe!) and the trouble shooting info does not resolve the problem. Can you please help?

I had this exact same problem because the router i had in my house was having interference issues and the speed was too slow to do it.
I would download a speedtest app on your iPad and see how fast your internet is. I think the app is called speedtest in fact.

Window 10 build 10041 does not work with Intel 82579V Gigabit Ethernet on ASUS motherboard

I originally posted this question here:
answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_update/window-10-build-10041-does-not-work-with-intel/6729892f-83aa-4822-b20a-ea84f4fd06c7
and was asked to post it on this forum...
I updated a computer I have which is a quad core i7 that I built and includes an ASUS motherboard with Intel 82579V Gigabit Ethernet built in. Windows 10 preview 9926 worked fine with this network adapter. Window 10 build 10041 does not, and I have tried
it twice so far. I even went as far as buying a Thunderbolt-Gigabit Ethernet Adapter (Broadcom, sold by Apple)... and while it installed the driver automatically, it did not work either. Each time you try to view the properties of either of them, it locks
up or give an error. In fact, doing much of anything with the Intel adapter icon assures you of not being able to do a clean reboot... have to kill power. I have finally gone back the previous version 9926, which has its issues but no where near as bad
as not having any network connectivity! Does anyone have this issue and a workaround?
Note, there are two images on the windows 10 preview forum that I posted this question on. I could not post the full link as I was getting a message here that links and graphics are not allowed.

Thanks Roger, I posted the following yesterday in the other thread (thinking it was this thread - confusing after they moved it here)... It may be that the new driver fixes the issue that 10041 has with it, but I have not tried that yet. If I do I will update
this... Thanks!
I have more information about this, which basically exonerates any issue with the Intel 82579V Gigabit Ethernet hardware or software. I have 3 computers with Windows 10 preview so I have multiple angles to see issues from. With this I have found a culprit
(but I suspect not just the only culprit) in this above mentioned problem...
10041 build combined with installing (or attempting to install) CISCO VPN Windows 7 64bit 5.0.07.0440-k9 client causes the issue mentioned above. I confirmed this on a completely different machine with a totally different Ethernet adapter. First machine
is an ASUS motherboard in a tower system I built, with the Intel 82579V Gigabit Ethernet hardware built in. Second machine is a Gateway Laptop from 2008 which has a Marvell Yukon 88E8057 PCI-E Gigabit adapter built in. Build 10041 will work fine with my 2008
laptop, including the MS VPN client (which I have tested). However, if you attempt to install or even uninstall the Cisco client you will have to do a recovery to a restore point (as I have done twice) in order to get your network working again. Installing
or attempting to install (because it never even does install properly and times out), CISCO VPN client will render your entire network unusable. Going back to a restore point saved me and I am still running 10041 but I can't use CISCO VPN client any longer.
I could with build 9926, including on all 3 machines. I now have 9926 on two machines and 10041 on only the 2008 laptop.
Hopefully this above information helps someone resolve the issue. I will also mention, even though my network is working on the 2008 laptop, I still can't go into the Control Panel\Network and Internet\Network Connections and right mouse click on the Marvell
Yukon 88E8057 PCI-E Gigabit adapter icon. I get an error when clicking on Properties menu popup : "An unexpected error has occurred". So something is still up with my network adapter driver or windows software, but it could be a side effect of all
that has happened with the Cisco software install attempts under 10041.
Another note: CISCO Anyconnect also has the issue.

Windows Server 2003 Updates are not working

Hello Dear Support
Please can you help me to sort out the issue for the Windows Updates, I cannot install automatically it is giving me error message " Failed"
What can be reason what i need to follow, i tried but couldn't figure out the exact problem
Kind Regards, Muneeb

Hi,
Please try below:
Step 1: Register DLL files
===================
By trying this step, we can check if the update engines are working properly.
1. Close all instances of Internet Explorer.
2. Click Start and Run, type "REGSVR32 ATL.DLL" (without quotes) in the open box and click OK.
Note: There is a space between REGSVR32 and ATL.DLL
3. Similarly, one by one, register the files listed below:
REGSVR32 MSXML3.DLL
REGSVR32 WUAPI.DLL
REGSVR32 WUAUENG.DLL
REGSVR32 WUAUENG1.DLL
REGSVR32 WUPS2.DLL
REGSVR32 WUCLTUI.DLL
REGSVR32 WUPS.DLL
REGSVR32 WUWEB.DLL
REGSVR32 QMGR.DLL
REGSVR32 QMGRPRXY.DLL
REGSVR32 JSCRIPT.DLL
Note: Please try and register all the files. While registering each .DLL file you should get a "succeeded" message. If you encounter any error message, please let me know the exact
wording.
If the issue persists, let's move on to the steps below to verify Windows Update services and temporary folders.
Step 2: Verify the relevant Windows Update services
========================================
1. Click Start->Run, type "services.msc" (without quotation marks) in the open box and click OK.
2. Double click the service "Automatic Updates".
3. Click on the "General" tab; make sure the "Startup Type" is "Automatic". Then please click the button "Stop" under "Service Status" to stop the service.
4. Then please click the button "Start" under "Service Status" to start the service.
5. Please repeat the above steps with another service: Background Intelligent Transfer Service.
If it still does not resolve the issue, let's proceed to step 3.
Step 3: Reload the Windows Update temporary folder
========================================
One possible cause is that the temporary folder for Windows Update contains corrupted files. Let's erase all the files there to get the system clean.
1. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.
Net stop WuAuServ
2. Click Start, Run, type: %windir% and press Enter.
3. In the opened folder, rename the folder SoftwareDistribution to Sdold.
4. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.
Net start WuAuServ
Please test the issue again via the Windows Update website and let me know the result. If the issue persists, to clarify the issue and provide more accurate troubleshooting steps,
please assist me in collecting the following information.
How to capture a screenshot
======================
1. When the error appears, please press the Print Screen key (PrtScn) on your keyboard.
2. Click Start, click Run, type MSPAINT, and click OK.
3. In Paint, click Paste under the Edit Menu, click Save under the File menu, type a file name for the screenshot, choose JPEG as "Save as type", click "Desktop" on the left pane, and click Save.
How to collect System Information
==========================
The System Information can provide us with more information about the current status of the system. I would like to check it for you. Please send it to me using the following steps:
1. Click "Start", go to "Run", type in "MSINFO32" (without quotation marks) and press Enter to start System Information.
2. On the popup window, on the menu bar, click "File", and click "Save to"; save it as an NFO file, such as "system.nfo" to your local Desktop.
3. Find the file, right-click on this file, click "Send To", and click "Compressed (zipped) Folder".
How to collect the Windows Update log file
================================
Note: Since there are two Windows Update log files with similar names, please be aware that I am requesting the "WindowsUpdate.log" file without a space in the middle of the name.
1. Click on Start, Run and type "WindowsUpdate.log" (without the quotes)
2. Click on the OK button. We will see a file named "WindowsUpdate.log"
3. Now click on the "File" menu and then click on the "Save As" and select "Desktop" in the "Save in" option on the top of the window.
4. Click on the Save button. The file will be saved to your Desktop.
Please upload the above files to
https://sftus.one.microsoft.com/choosetransfer.aspx?key=0fd9ebfc-9943-44db-9c18-f2bd879208ba
Password: hF6!vkC-6QBf4Q
Tim Quan

Received this error message when starting iTunes and reinstalling does not resolve it: The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing.

Received this error message when starting iTunes and reinstalling does not resolve it: The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing...
Can I uninstall existing iTunes without losing my media library? and then install fresh to fix this problem?

Hi there kweitkamp,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299
-Griff W.

AdbeRdrUpd1001_Tier1.msp Update Does Not Install using Nullsoft

Hello,
I am attempting to use the Nullsoft Scriptable Install system to install the Adobe® Reader® 10.0.1 update on Windows XP SP3. I determined that the Adobe update will install as expected when I run the msp on a console command line with the following arguments:
C:\temp\> AdbeRdrUpd1001_Tier1.msp /passive /norestart
However, when I put the same exact command into Nullsoft script, the update does not get applied. I have a theory that the Tier1 update needs to determine language information from Windows XP and because the Nullsoft script executes in a Windows environment that is not fully initialized, the language information is not available and the update fails. If you can expand on this or provide any insight please respond to this message. Any help with this question would be greatly appreciated.
Thanks, Jeff

you could start by uninstalling the HP Update program from Add/Remove Programs.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Automatic update does not work

On my both computers (Windows 7, Window 8), the automatic update does not work at all, although it is activated in the options. All I get in the Firefox info box is that an update is available, with a link that I have to follow to download the installation file and install it manually. No difference even if I wait for weeks, the update is neither downloaded nor installed automatically. The problem persists in all Firefox versions since version 3.6.16 / 2011 (the last update in the chronicle). Note that the automatic update seems to perform well in the Windows XP mode of my Windows 7 system !

It will update eventually; there may have been availability problems on the update servers.

Windows Phone 8X Update Does Not Resolve Problems

Similar Messages

Maybe you are looking for