Windows Thin PC SP1 32-bit - can't properly install Photo Viewer package

I have performed a clean installation of Thin PC SP1, and tried to add a Windows Photo Viewer package:
1. Downloaded Standard_7SP1_32bit\Standard 7 SP1 32bit IBW from http://www.microsoft.com/download/en/details.aspx?id=11887
2. Found a Feature Package named winemb-photos-viewer.cab
3. Installed it via dism /online /Add-Package /PackagePath:bla-bla-bla
It seems like package is installed, however if I double-click any photo, or Open with Windows Photo Viewer - result is: nothing launches, no new processes in task manager.
Hm?

3 years have past. Hope this could help. If the Photo Viewer is installed by dism, it will not have the MUI language file for its launch. You can go to Program File\Windows Photo Viewer\en-US. (en-US may differ to your installed language). The photoviewer.dll.mui
will not be there.
To solve this problem, just simply reinstall the english language pack (or the language you use) again by "Dism /online /add-package /packagepath:x:". Some default language packs can be found in the disk of Standard_7SP1_32Bit as you downloaded.
A whole lot of time to find the real answer why Photo Viewer won't launch and the print in right click menu doesn't work just because it's lacking of language files.

Similar Messages

Turbo boost problem for DV6-2170ee with Windows 7 Proffessional SP1 32 bit

hello every body,
For:-
HP DV6-2170ee with I7 720 qm processor
System: Windows 7 Professional SP1 32 bit
I have a strange problem, while i am working on battery processor can boost up to 2.6 but when i connect it to the Ac adpater charger, no boost is there?!!!!
Checked through internet and did the following:-
1-update the bios.
2-check power option and use the same settings as in battery mode.
3-observe processor temperature through CPUID HWmonitor, it's almost 65 lower than 67 in the battery case.
4-searched allover the whole internet google .. yahooo ...
5-Each time i try to install the SP50038 which is the driver for the inter turbo boost, it gives an error message "your pc doesn't meet the minimum requirement"
TIll the moment no solution, could you please help me ?
Thank you for your time ans i hope to receive solutions soon ..
Thanks in advance ;-)
This question was solved.
View Solution.

Hi,
To answer your last question first, the Turbo Boost Technology Driver is only intended for processors with an integrated GPU - the i7-720QM does not have this.
More difficult is why you observe no Turbo Boost on AC Power.
Try the following.
Shut down the notebook. Tap away at f10 as soon as you start the notebook to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
When windows has reloaded, download and install the Turbo Boost Technology Monitor from Intel on the following link and see what this shows.
http://www.intel.com/support/processors/sb/CS-031038.htm?
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Installing DSEE 7 on Windows 2008 R2 SP1 64-bit does nothing

Hi All,
Has anyone been able to install DSEE 7 on Windows 2008 R2 SP1 64-bit? Is it supported?
I followed the instructions and when run the command (as the Administrator) below nothing happen, it simply return an empty command prompt. Ms VC 2008 Redistributables (the one that come with the archive) is installed.
dsccsetup.exe war-file-create
dsccsetp.exe ads-create
When run the same command using the same archive on Windows 7 64-bit it does prompt for further input or report error.
Any suggestions or help would be much appreciated.
Shane L

Windows 2008 R2 is not listed as a supported OS in the release notes.
http://docs.oracle.com/cd/E19424-01/820-4805/820-4805.pdf
It lists:
Microsoft Windows Server 2008 Standard Edition for x86 and x64 Service Pack 1
Microsoft Windows Server 2008 Enterprise Edition for x86 and x64 Service Pack 1
If you are able to go to the next version, it is listed as supported in the release notes for ODSEE 11g:
http://www.oracle.com/technetwork/middleware/downloads/odsee-11gr1certmatrix-161592.xls
I have not tried 11g on 2008 R2 myself, but if it is in the certification matrix, it should work.
Hope that helps,
Eric

I am trying to install itunes on my computer which is running windows 7, sp1, 64 bit. i get the message 'THIS INSTALLATION PACKAGE COULD NOT BE OPENED.VERIFY THAT THIS PACKAGE EXISTS, ETC'. any ideas how to fix?thanks jake

i am trying to install itunes on my computer which is running windows 7, sp1, 64 bit. i get the message 'THIS INSTALLATION PACKAGE COULD NOT BE OPENED.VERIFY THAT THIS PACKAGE EXISTS, ETC'. any ideas how to fix?
thanks jake

Hello tcampbell1549,
Thank you for using Apple Support Communities.
For more information, take a look at:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Have a nice day,
Mario

I'm looking to use Bootcamp on my iMac 24". If I download Windows 7 from the Windows website, can I properly install it to my Mac? Do I need the disks instead?

I'm looking to use Bootcamp on my iMac 24". If I download Windows 7 from the Windows website, can I properly install it to my Mac? Do I need the disks instead?
I'm hoping to download it from their website because I can pay $30 for the student discount instead of $119...

When burning the .iso file to a disc restrict the burn-speed to 2x
Otherwise the disc will most likely not work.
It's a common phenomenon on Macs.
Regards
Stefan

I cannot install itunes on my computer; I keep getting the following message every time:   Could not access network location %PUBLIC%\Desktop\.   I have a DELL Optiplex 750 Desktop Computer, Running Windows 7 Professional, SP1, 64 bit, 3.40 GHZ, 4.0 GBRAM

I CANNOT INSTALL I-TUNES 64 BIT ON MY COMPUTER. I HAVE A DELL 750 OPTIPLEX DESKTOP COMPUTER RUNNING WINDOWS 7 PROFESSIONAL SP1, INTEL Q965/Q963 EXPRESS CHIPSET FAMILY.   THE ERROR MESSAGE I KEEP ON GETTING EVERY SINGLE TIME IS:
Could not access network location %PUBLIC%\Desktop\.
ANYONE HAVE AN IDEA ON HOW TO FIX THIS PROBLEM?   THANKS FOR YOUR HELP IN ADVANCE!

Hello there, jag123059.
The following Knowledge Base article offers up some great steps to follow for resolving issues with installing iTunes:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I can't modify a photo viewer AS3 file

I found a photo viewer tutorial that fascinates me, and the
author allows use and modification. I like the way it looks except
for the 10 buttons (which I believe are present via XML). I need
tips on how I should go about replacing the buttons with a
scrolling thumbnails movie clip I have. Thus, I will need to assure
that the image sizes of the gallery coincide with the positioning
of my scrolling thumbnails because my thumbnails are 100x100.
I believe the code was created dynamically based on the
number of items loaded from the xml file (10), and it centers to
the top of the stage.
yours sincerely

Unlock the lock in that window & change it to Read & Write, assuming this file is on your hard drive.

CF10 on Windows server 2008 (64bit): 32-bit CF cannot be installed, but 64-bit can.

Hi, I have exhaused my research and ways of fixing this issue.
I have a Windows Server 2008 (64-bit).
I am able to install 64-bit CF10 on it and CF websites run just fine.
On the same machine, I have a ASP website that must be in run in 32-bit and within this website there are some ColdFusion pages. So I have to install CF10 32 bit. So I uninstalled CF10 64bit.
When installing CF10 32 bit, I always got error message:
Cannot configure IIS connector. Enable the required option ASP.NET, ISAPI Extensions and ISAPI Filter in IIS under Windows Features and try again.
I did lot of online research and found RELATED posts, but none of them worked for me. Basically, in my case I have the IIS following installed
ISAPI Extensions
ISAPI Filter
ASP.NET
CGI
but I alway got the above error message. Cannot think of other reasons.
Any help is really appreciated!!! I have been working on this thing for the past three working days.
Regards.

Hi,
I saw your post which is similar to the problem I'm trying to solve. I'm not sure if I need to post a new topic, but I thought just add it to your post.
I installed CF10-64bit on Windows 2008 server (64 bit). When I opened the CF admin, it gave me an error - HTTP Error 500.0 - Internal Server Error. The page cannot be displayed because an internal server error has occurred. Module: IsapiModule, Handler: cfmHandler, Error Code: 0x800700c1. After searching for solution in the internet, I finally made it work after changing the DefaultAppPool which is used by the CFIDE in the advance settings, the "Enable 32-bit Applications" to False.
Now, my problem is I have an ASP application which requires that the application pool advance settings must be set to True for "Enable 32-bit Applications". I created another application pool for this application. It woks fine. However, this ASP application calls some CF pages and I'm having a problem because the CF10 is set to use a different application pool with diferent setting for "Enable 32-bit Applications".
In order for my application to work, it seems that I need to install the CF10 32 bit version. Am I right? Or is there a work around for my issue?
Thanks in advance for any help.
I'm going to create a new post for this.
Message was edited by: tibay

HP LaserJet 2600N & Windows 7 64-bit - Can't Complete Install or Uninstall

The printer will not completely install on my new laptop via my home network ... simply dies part-way through the process.
- It puts the Toolbox on my desktop which is unuseable - shows no printer.
- No printer shown under printers
- HP uninstall routine on disk dies with a "setup error"
- Can't find any HP file online to completely remove this garbage and get another brand that will actually work ... with a company that actually updates their drivers and provides "real" customer support.
A Disgusted and FORMER HP Owner

You should try the HP Universal Print Driver (UPD), which does list your device model as supported by the driver. Go to www.hp.com/go/upd, hit the DOWNLOAD SOFTWARE. Select a Windows 7 x64 OS, then I recommend trying the PostScript (PS) driver. The installer will prompt a few questions-- select "Traditional Mode", provide your port information, etc, proceed.
Though I am an HP Employee, my posts express my opinion, and not of HP

HP Pavilion 17-e049nb windows 7 pro sp1 32 bits upgrade to W8

Hi,
I've downgraded my laptop form w8 to w7 but i found out that's impossible to find W7 compatible and working drivers.
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/HP-Pavilion-17-e049nb-drivers-f...
how can i restore and set up w8 again ?
i tried the F11 but nothing happens, i think thats because i've removed the recovery forlder/drive..
if anyone can help me to find a link to download the recovery it will be great.
Thank you.
This question was solved.
View Solution.

Hi @Urluburulu
I understand that you have downgraded from your factory installed Windows 8 to Windows 7, and also that you removed the recovery partitions.
Since you removed the recovery partition, you have a few options depending on whether you made a set of recovery disks first. In that case, use the recovery disks. If not then you can obtain a set of recovery media from HP directly. It is not available for download due to operating system licensing issues.
Obtaining HP Recovery Discs or an HP USB Recovery Drive
Your other option, would be to use another Windows installation disk, and then update your drivers from the HP website.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Missing Remote Desktop Dialog Box in System Properties Running Under Windows 7 Ultimate SP1 But I Can Still See Remote Assistance Dialog Box

Hello to everyone i am using Win 7 Ultimate SP 1 and when i go to system properties -> remote settings all i get is the remote assistance dialog box and i can't find the remote desktop dialog box. I can see the remote assistance dialog box but i
can't see at all my remote desktop dialog box. Does anyone has any idea???????
i have tried almost anything. I have opened exceptions in windows firewall for remote desktop. I started the remote desktop services manually but nothing happend, i still can't see the remote desktop dialog box and that's odd because i can see my remote
assistance dialog box in system properties-> under the remote tab but as i said i can not see my remote desktop settings.
Plz help.....
Thanks in advance!

Hi,
First, please try the SFC command to check if you any corrupted system files:
How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on
Windows 7
If this issue persists, it is recommended to perform system restore to get back to a previous time point to check what the result is:
System Restore - Windows 7 features - Microsoft Windows
Hope it helps.
Alex Zhao
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Leap connecting to BlackBerry Link on Windows 7 Pro SP1 64-bit

Connecting with USB cable, you are prompted, initially to install drivers. This initiates the installation of the Device Manager, BlackBerry Link and BlackBerry Blend. After installing/un-installing/re-installing the software several times, checking a raft of knowledgebase articles, I still cannot get Link to recognize an attached device over USB. If I look at the device manager, I have the BlackBerry (USB Serial Bus Controllers) and Black Berry Virtual Private Network (Network Adapters) and have attempted updating the drivers for these. During software uninstallations, I have also purged directories and registry entries. I am running ESET A/V and have disabled A/V and Firewall during software installs. I have tried connecting with the Leap in various states (Airplane Mode, with WiFi on, With WiFi/Mobile Network on). In every case, the device asks to Install Drivers, etc. and is not visible in the BlackBerry Device Manager.

try copying the installation files to a desktop folder and installing from the folder.
if that fails, download the installation files,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Bootcamp 3.1 (64 bits) can't be installed on Bootcamp 3.0 (32 bits)

I installed without problems Windows 7 (64 bits) on my iMac and everything works properly, except for the printer (not found) and the Magic Mouse.
When I try to install the Bootcamp 3.1 (64 bits) in Windows, I get the message "You have to install Bootcamp 3.0 first". But when I try to install the last (found on my OS disk), I get the message "This version (32 bits) will not work on this computer."
Where I can find a Bootcamp 3.0 (64 bits)? Or how can I fix that otherwise?
Thanks (and sorry if this was already answered somewhere - I took a look but just can't find the solution.)

Copy the whole contents to a folder in Windows and navigate to
Apple - Drivers - Bootcamp64
Control click and select Troubleshoot
Or, change Properties and choose Vista or Earlier Windows mode.

Can't Properly Install Flash Player

When I download Flash Player to Windows XP Professional {version 2002 SP3} on my Lenovo SL500 laptop, everything seems to go smoothly. But when I go to the Start button to list All Programs, Adobe FP is not listed. When I go to the Control Panel/Add & Remove Programs, Adobe Download Manager & Adobe Flash Player 10 ActiveX are there, but the latter shows no amount of space used/just blank in the Size column.
I've tried uninstalling, rebooting, temporarily disabling the AV software {Eset NOD32 Antivirus 4.0}, closing all other applications, and clearing out the browser history/cache, and then down-loading the new FP, but I always get the same result: no FP that works. Under the security settings in IE for both internet & trusted sites, I've adjusted the security levels to medium, and the Active Scripting has been enabled. Also, when I have IE open {version 8.0}, Tools>Manage Add-ons, I do not see the Shockwave Flash object listed {even when I select Show all add-ons}. I recently was a victim of Antivirus8. But the next day, Eset was able to kill it, and my computer has been working fine ever since, up until this problem with the FP. Today, I downloaded & did a scan with the free version from Malwarebytes.com, which corraled 3 tainted files & elimnated them. But still no working FP e.g. I can't see the animation at http://www.adobe.com/software/flash/about. Did this virus damage the registry? How can I resolve this? Help!

function(){return A.apply(null,[this].concat($A(arguments)))}
MikeAcctFin wrote:
I've completed the 1st four steps, with step 4 renaming the file to Remove_kill-bit.reg
However, in step 5, double-clicking doesn't execute it. Double clicking only opens up the Notepad file.
I wonder what went wrong - do you still have that original file you have created?
It is possible that you have file extensions hidden, so after you saved the file (as Remove_kill-bit.txt) it showed only as Remove_kill-bit ? In that case, renaming it would actually rename it to Remove_kill-bit.reg.txt, so it would still open in Notepad.
I will amend my original instructions, and also add a comment that it may be safer / easier to just download the zipped file.
Thank you for your feedback. And I'm glad it worked!

The requested OLE DB provider SQLNCLI10.1 is not registered. If the 64-bit driver is not installed, run the package in 32-bit mode.

Locally I have 32 bit windows and the server is 64 bit. When I try to change the provider locally to SQLNCLI11.1, the connection test succeeds but when I close the package and reopen it the provider is set to 10.1 again. Do I need to install a driver locally
to get the 11.1 version to work, or is this not the issue with the error message?
Thanks

Have you set the Run64BitRunTime configuration property?
Don't forget to mark helpful posts, and answers. It helps others to find relevant posts to the same question.
I don't see that property. Is it on the connection?

Windows Thin PC SP1 32-bit - can't properly install Photo Viewer package

Similar Messages

Maybe you are looking for