Wireless internet connection is poor, wireless internet connection is poor

Hi..
I just purchase an iMac desktop and dont know much on how to use them. A couple of questions: when i set up the comp, it suggested that i could transfer my data from another computer to this. I clicked yes, followed the promts. It loaded for 4 hours then said it was succsefull. Both on my imac and my laptop. However, i cant find any of my information, photos, documents etc??
Second question is: My wireless internet connection seems to be quite poor? Its slower than what is was on my laptop. I went to apple store, went to poor wirelss conection they wanted my serial number so i did that and it just had the loading symbol for aagggeess and nothing happened? ive tried to call Mac support, it said thats is currently closed but didnt say when they open.
Any help will be appreciated!
Thanks Cait

Hello CAit & welcome!
It loaded for 4 hours then said it was succsefull. Both on my imac and my laptop. However, i cant find any of my information, photos, documents etc??
Look in the Users folder far another/imported ID to log into.
Let's seehow the Wifi is under the other account.

Similar Messages

  • Airport is connected to my wireless network, but can't connect to internet

    I'm a first time mac user. Earlier today our power went out, and when it came back on, our wireless router reset. We currently have 4 computers that we connect to the internet; 2 of them are Macs, 2 of them are PCS. Both of the PCs are connected to the internet with no problems, but both of the macs refuse. I've run diagnostics on both computers, and it says it can't find an error. I've contacted my provider, and my internet service is not the problem.
    It keeps saying that AirPort is connected to the wireless router (my wireless router), but cannot connect to the internet. I've been trying to fix this for over 3 hours now. I work nights, and need my computers for work, so as it sands i'm currently losing money over this Can anyone help please?

    Welcome!
    Can you clarify what model iMacs you have? This forum is for the older G4 iMAcs with the articulated monitor and a hemispherical base. However, due to poor forum labeling, many people with newer iMacs are lured to this area. Reset procedures may vary with model so it's important we know which variant you have. Use "About the Mac" in the Apple menu to find your processor type--that should be enough for now.
    Once you you figure out the processor type, append it to the equipment info in you profile, Example: it now says "iMac." If you find yours has a G5 processor, change it to read "iMac G5." That will save you a lot of keystrokes down the road.

  • I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?

    Hi
    I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?
    I have tried reseting the network settings and forgetting my wireless connection and re-connecting to it. I even backed up my phone on itunes and restored it, factory reseted it. Nothing seems to work.
    Also after my upgrade to ios 8.1 my personal hotspot option under cellular data has disappeared.
    Would you please help me out? I would really appreciate it.

    Hi..
    Restart your router then restart the iPhone to test.
    If that doesn't help, try this support article >   iOS: Troubleshooting Wi-Fi networks and connections

  • Hello, my sister her macbook pro cannot connect to our wireless internet. My imac however can, so the problem has to do with her laptop. We were wondering how we could solve this problem? Thank you very much in advance!

    Hello, my sister her macbook pro cannot connect to our wireless internet. My imac however can, so the problem has to do with her laptop. We were wondering how we could solve this problem? Thank you very much in advance!

    We did that, but it just doesn't seem to be able to connect. So basically we tried to connect to our network and insert the password, but afterwards it does nothing. Weird thing is also that the network symbol (top right of the screen) says that it has been connected, but when I go look at the system preferences --> network, it states that it has not been connected

  • I'm unable to browse the internet at home on my Macbook Pro (10.6.3), even though it shows I am connected to the wireless network with full bars.

    This problem began weeks ago, when I suddenly couldn't browse the Internet at home despite being fully connected to the network. The network was a private, password-protected wireless network set up through a Netgear router.
    I have spent hours troubleshooting and have tried multiple fixes including resetting PRAM, deleting and re-creating Airport, deleting and re-creating networks, changing IP and DNS, etc. to no avail. My roommate's PC works perfectly fine on the same wireless network.
    This seems to be an issue with networks I use long-term. I can connect fine to networks at Starbucks, etc. for short-term use. Also, while trying to troubleshoot my connection issues on my home network over the last few weeks, I'd been using my apartment complex's public wireless connection (no password) with no issues. All of a sudden, I am having the same exact issue with that network. It's like something just snaps and maybe gets configured wrong after a few weeks or months of use.
    I am desperate to find a fix, since now I can't use the internet AT ALL while at home and need it for work.
    Thank you in advance for your help!

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode.)

  • My ipad nor my iphone will connect to the wireless router, and i have no internet connection

    In my previous place I had all my Mac Book, iphone and iPad connected through the wireless router. Now in my new place my macbook is connecting occasionally, and my iphone and ipad are not connecting at all, although in "settings" it looks that they are, but when I open the browser it says "safari cannot open page because it is not connected to the internet" What is wrong?

    nandasaboia wrote:
    The networks show up, but since I haven't been able to connect, I don't get the "forget this network" option.
    Yes, other users are iphone users.
    Where the network shows up settings >>>wifi >>>Office network >>>click the small i in a blue circle click and you will find option to forget network

  • Internet Connection - Your Apple wireless device does not have a valid IP.

    I just bought an Apple TimeCapsule and set it up normally, following instructions to my Arris cable network on the Videotron provider here in Quebec, Canada. The TimeCapsule did appear as a wireless device on my MacBook Pro (after updating the AirPort software from the provided CD - as was instructed). I went through the whole installation process to obtain at the end this error:
    Internet Connection - Your Apple wireless device does not have a valid IP.
    The only provided instructions were to check the cable and then contact your Internet provider. Well it seems clear to me that if I contact my provider and say that the internet connection works fine directly on my computer, also fine through my "normal" wireless router but not with my new TimeCapsule, I won't get much of a response.
    After a lot of research, a friend indicated the solution in my case.
    You have to really reset the cable modem to convince it to start giving out IPs again.
    To do this:
    1. Unplug your TimeCapsule (possibly you might have to reset to factory defaults - see the documentation)
    2. Unplug your cable modem
    3. Reset your cable modem by pressing the reset button with a pen (or something) for several seconds.
    4. Plug your cable modem back in and let it reboot/restart - until the lights are back on.
    5. Plug in your TimeCapsule
    Everything should now work and you can restart your AirPort set-up on your Mac.
    Good luck!

    My ISP is AOL.  The service is DSL via a broadband modem.  Somewhere during the setup process there appears to be a communicatiosn issue between the Airport Extreme Base Station and the DSL modem.  When I hook the DSL modem directly to my iMac I can connect to the internet without any issues. 
    I tried the factory reset and the DSL modem reboot process described in other posts and seemed very close to success...until the internet setup step.  That is where this issue first presented itself.

  • WRT54G v6 - Can Connect to wireless network but can't access internet

    Ok, this is my last resort for help. I spent two hours yesterday with linksys "chat" support to no avail.
    First the techincal details:
    OS for all machines = Windows XP
    Laptop w/two adapters - one wired, one wireless
    WRT54G v6 upgraded with 1.00.9 firmware
    SpeedStream modem from DSL provider
    I have manually set the IP, subnet mask, gateway, primary and secondary DNS for my wireless adapter (using the Alternate Configuration in the Internet Protocol Properties of the Wireless Network Connection). When I connect to the wireless network I see that the IP, subnet, gateway and DNS server IPs are all correct (via ipconfig /all).  I see that I am connected to my SSID (11.0 MBps, signal strength Excellent) however I can't access web sites (the server not found message appears in the browser) nor can I ping the router IP or any other IP (LAN or WAN).
    My wired PC works fine with this router. My laptop works fine with this router when wired. 
    Anyone face a similar situation and have a solution?  Thanks.

    A new discovery...
    When I disable the wireless security on the router, I am able to connect to the wireless network, ping the router and access the internet.  So, there is apparently something wrong with the WEP security (although I am able to connect to the wireless network when WEP is enabled). 
    I am thouroughly confused. Any help is appreciated. Thanks.

  • Why won't my MacBook connect to my wireless internet at home?

    I'll try to give as many details as I can:
    I'm a freshman in highschool & have a MacBook from my school that I use for the year. It's just a regular MacBook, not an air or anything. In class the other day, my computer froze up completely, so I used the command-option-escape, or whatever, to force shut down my machine. When I booted it back up at school, it worked just fine & connected to the internet. But when I brought it home, it wouldn't connect to my home wireless internet. It has always hooked up in the past perfectly fine. It's not a problem with the connection, because my Dell laptop & iPod touch connect off my wireless just fine. It's just this device. It also doesn't connect at my church, just at my school it works. I'm using en ethernet cord right now, but I'm confined to about 3 feet from my router, so I have to sit in one room.
    I tried restarting it, shutting it down, zapping the PRAM, etc. I even brought it into my school's Help Desk, & the lady tried several things that didn't work. We tried deleting the name from my keychain & history, but it just does the same thing. There's an exclamation point over the wi-fi bar, & it shows that I have a full connection. It just doesn't connect. I have a MacBook, but I'm not sure what iOS it is. I know it's 4-something, but I don't know exactly, sorry.
    Can anyone help? THANK YOU SO MUCH if you can.

    These are suggestions for connecting an iPad. Some are also applicable to your MB.
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
     Cheers, Tom

  • Hi there can anyone help. I am connected to the internet by ethernet but my connection keeps timing out and my network diagnostics shows all green and network connection ok but still no internet connection. the other wireless laptop in my flat works well.

    Hi there can anyone help. I am connected to the Internet by Ethernet but my connection keeps timing out and my network diagnostics shows all green and network connection ok but still no Internet connection. the other wireless laptop in my flat works well. Could the other wireless laptops being used in my flat be affecting my connection. what can I do to get connected, keep connected. Thanks for any ideas out there.

    My network connected for a few hours then went back to timing out. I have not changed anything. However there four additional laptop users in my family who do not seem to be having any problems using their wireless connection. Could their film and music downloads be causing the timing out of my connection and if so is there a way I could prioritizes my computer or limit their use?

  • Airport Express wireless network works fine, but won't connect to Internet

    I had a power outage and since then my Airport Express doesn't connect to the Internet although everything else seems to work. I can see the AE just fine in the Airport Utility. My computer connects to the wireless network provided via the AE, so does my iPhone, so does my wireless printer, and I can print wirelessly from the computer to the printer, so the AE's wireless networking is working. If I directly connect my computer to the ethernet connection that I use for the AE, it connects to the Internet, so I have wired connectivity to the Internet. But somehow, I can't get to the Internet using the wireless network of the AE. Any suggestions on what I should try next?

    Hi there,
    Try to reset your Airport Express (AX), y pressing the little dot on the back of device. Keep pressed for some seconds until it flashes. Start then your Airport Utility and go through the setup process again. This will reset your whole wireless network. This may work for you. Good luck.

  • My wifi connection is not working, internet keeps sticking, printer cannot connect wirelessly now either. Help please

    Hello
    Urgent help needed please, I require this Mac for work everyday and my work is based on the internet. However over the last 2 months it has gradually slowed down (connecting to the internet and working on the internet). Yesterday it was at its worse, Im hoping I can keep connection for long enough for this!. My phone cannot wirelessly connect either anymore and my printer also stopped. Please help...

    Hi Mindmeldz
    Tried it many times!! became a daily routine until it ground to a slow halt yesterday. All other p.cs can connect to it fine. Any other ideas?

  • As i turned on my iphone 4s on and connected to a wireless internet a page opened from the app firewall ip and i usually choose all connections. so it got stuck i held the standy by button but it won't turn off. so i held the standyby and home buttons.

    As i turned on my iphone 4s on and connected to a wireless internet a page opened from the app firewall ip and i usually choose all connections. so it got stuck i held the standy by button but it won't turn off. so i held the standyby and home buttons. when it opened all apps music and pics where not there. why? then i enterted photos and the loading logo appeared then the standyby appeared and i entered my password and everything in my iphone was there but thing were scattered and apps wheren't in folders everything was messed up but no photos or music AND IT SAYS UP IN THE MIDDLE OF THE SCREEN EXIT SAFE MODE. so i restarted it again and it opened and nothing was there and again i entered photos and the samething happen again. why did this happen? and can i get my data back? and in the usage it says that these thing are there but not showing.

    stevejobsfan0123 wrote:
    The Find my iPhone service option is given to you when you first set up the device. If you just reset it, you may have been given that option. So, in other words, the service may have been enabled even if you didn't realize it. You can then go to www.icloud.com and click on Find my iPhone, and have it play a sound. Or, you can use the Find my iPhone app on your mom's iPhone, but the service would still need to be turned on on your iPod.
    Unlike Compukid said, Apple will not assist in locating a lost device without the Find my iPhone service.
    I found that out 2 years ago, it's just that I thought Apple might have changed that.

  • I have a Power PC G4 which is running on OSX 10.5.8, it has the AirPort utility but cannot connect to the internet as my iMac can, I think I might need an AirPort Card? Is that the case or do I need something different to connect to a wireless modem?

    I have a Power PC G4 which is running on OSX 10.5.8, it has the AirPort utility but cannot connect to the internet as my iMac can, I think I might need an AirPort Card? Is that the case or do I need something different to connect to a wireless modem?

    Welcome!
    Only one variant of the PowerMac G4 could use the faster Airport Extreme Card. The rest used the original Airport card that is pretty slow.
    To get fast wireless without buying more than one thing, consider this:
    http://eshop.macsales.com/item/Edimax/EW7722IN/
    It goes in an available PCI slot
    There are USB solutions also. However, all PowerMac G4 towers had only slower USB 1.1 ports, so any USB wireless adaptor can only run at about wireless 'B" speeds (slow) unless you also install a PCI USB 2.0 adaptor card. Doing that would allow a USB wireless adaptor to run at its maximum rated speed. These items working together would accomplish that:
    USB wireless "dongle:"
    Newer Technology MAXPower 802.11n/g/b USB Adapter + Plug and play direct or with extension cradle
    USB PCI adaptor:
    http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Popularity%7c1&Ne=5 000&N=7069&Ntt=USB+PCI
    Each approach has its advantages. The PCI wireless card is a one-piece solution that takes up no desk space. The USB2 card+USB2 Dongle gives you more fast ports for transferring date from other external USB devices (primarily cameras and external hard drives) at hugely faster rates than can the original ports. I have a USB 2 PCI card in my G4 tower strictly for transferring images from my digital SLR camera in a timely manner.

  • In Windows 8, after connecting to VPN - Wireless datacard connection disconnects. Once i disconnect VPN, 3G datacard internet connection comes back.. Any idea

    Not able to access my remote machine using VPN in Windows 8.
    VPN connected successfully resulting internet  disconnection .
    I am using Wireless 3G datacard device for internet.
    But the same VPN connection is working fine in WIFI & I able to access remote machine. Not sure why the problem when connecting from device.
    Plz help me out guys.
    Thanks in Advance

    What kind of VPN client are you using? You can try the following suggestion for a test.
    1) Get into VPN Properties
    2) Select "Security" tab
    3) Click "Allow these protocols" radio button and check the "Microsoft CHAP Version 2 (MS-CHAP v2)" box
    4) Select Networking Tab; select "Internet Protocol Version 4 (TCP/IPv4)" and click "Properties"
    5) Click "Advanced"
    6) Uncheck box for "Use default gateway on remote network"
    Niki Han
    TechNet Community Support

  • Connecting to new wireless internet makes macbook stop functioning?

    When i connect my mac book pro to wifi internet it stops functioning. When airport is switched off it works fine. Anybody know why?
    The strange thing is i recently moved and when i take the laptop back to my original home it connects to the wireless internet fine and the laptop works great. I only have an issue when i try to connect to the new wireless internet at my new place??

    Hi adamtreff!
    I have a couple of articles that can help you isolate this issue a little further. First, you will want to be sure you are using the correct settings for you Wi-Fi router. These are the recommended settings on your router for best compatibility with iOS and OS X devices:
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    Next, you will want to troubleshoot your Wi-Fi connectivity. There are some helpful troubleshooting steps located in this article:
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

Maybe you are looking for

  • My HP Pavilion 775C with Windows XP 32 bit SP3 has begun to startup in Windows Recovery Mode.

    I have had many problems with my Pavilion a775c desktop, running XP 32 Bit with SP3 and 2.5 G Ram.  I was receiving a Fatal Error message 1327 that Drive M did not exist.  I did a selective startup eliminating the programs I thought were causing this

  • Getting back my old data after HD crash

    I've just erased my mac hard drive becuase it was corrupt and re-installed OSX, I did the simple erase with the disc utility. I know the data still exists on my hard drive and will just be over written with new data when it comes along. Is there any

  • How to use jdb for debugging a servlet?

    I'm using Apache/JServ with jdk 1.4 (via Textpad on win2K SP 3). The 'gospel' I'm trying to follow is: 'Start the server manually and record the password for remote debugging (this is displayed on the console).' 'Start the Java debugger:' 'jdb -host

  • Remote Rollover in Flash Catalyst

    Hi there, I am trying to figure out how to make a remote rollover button in flash catalyst. I have one graphic, when the mouse rolls over one part of that graphic, text should appear next to it...while rolling off the graphic, the text should disappe

  • Requirement for maintaining status "completed"

    Dear All, We have following requirement: 1) We do not want the message processor to "close" the support desk message.     we maintain the staus schema as SLFN001 with "completed" as one of message status.     We want that message processor should not