Wireless max speed?

whats the macbook max wireless speed?
macbook Other OS

well not got my mac yet getting it soon so should have n right its on all models?
reason why im asking i have 270mb netgear n

Similar Messages

NC6000 wireless max speed of 11 Mbps & was 54 Mbps before hdd replacement - XP Pro sp3

I had to replace my hdd. All went well except my wireless lan speed now seems to be capped at 11 Mbps. Before the crash I was getting speeds of 54 Mbps. I have tried numerous things to no avail. It is apparent I do not know what I am doing. When I hover over the wireless lan icon I see the following:
Wireless Network Connection 2 (default)
Speed: 11 Mbps
Signal Strength: Very Good
Status: Connected
Any and all suggestions are appreciated.

SOLVED:
The Airport Extreme is dying. Why it works on some computers and not others is beyond me but, after replacing it, everything works flawlessly. I hope this is covered under warranty.

BEFW11S4 max wireless download speed?

What is the maximum download speed that can be achieved wirelessly with the BEFW11S4 router?

Thanks for the reply. When I hook my laptop up to the router with a wired connection, I'm getting 4.5 Mbit/s download speed. However, when I'm connected through the wireless connection I'm only getting 1.5 Mbit/s. After doing an internet search, it seems like there can be a lot of things causing this. Any ideas of what to try first to improve my wireless download speed? The hardware involved is the router mentioned, a Dell XPS M140 laptop running XP, and Qwest DSL.

E2000 max wireless-n speed 72 Mbps?

I just bought a refurbished E2000 wireless-n router with 1 Gb LAN ports (from Cisco online).
This router is meant to replace my Netgear wireless-n router that only have 100 Mb LAN ports.
I have 10 devices in my home network, 6 of them are using wireless (1 'g' and 5 'n') and 4 are interconnected with cat5e cables (trough the router).
The devices have some different operating systems and their network adapters are from different brands.
When I set up the Netgear router I didn't have to adjust anything for the wireless network to work fine.
All wireless-n devices worked at 150 Mbps (sometimes going down shortly to 130 Mbps).
The wireless-g device worked at 54 Mbps.
For the last 2 days I've been trying to set up the E2000 to achieve a wireless-n speed higher then 72 Mpbs... without success.
I tried all the suggestions that I found in the Cisco Knowledge Base.
- Upgrading the firmware to the latest version
- Trying different channels and channel widths
- Different wireless security methods
and many others.
Also trying different settings on the different devices doesn't help.
Changing the distance between router and devices as well as changing the location of the router don't affect the results.
Switching on only 1 device at a time doesn't change anything either.
It looks like the E2000 is set to not transmit on a higher speed than 72 Mbps, when it's actually supposed to achieve a wireless-n speed of up to 300 Mbps. I would be lucky if I get the half of it, but not if it's only one fourth.
Is there some hint somebody can give me?
Thanks!

According to the information that you provided in your post that after upgrading the firmware you didn’t reset the Router to factory default and configured again…. So reset the router power cycle the whole network and then reconfigure it again… As well as update the drivers of the WLAN card installed in the wireless computers….
So if you want to configure the Router with the help of the Cisco Connect Software then…
You need to uninstall the existing Cisco Connect Software from the computer if there...
Reset the Router and power cycle the network...
Make the following connectivity: Connect the Modem with the Router on the Internet port and then connect the Computer with any one of the Ethernet port of the Router (Numbered 1, 2, 3 and 4)... Then install the Cisco Connect Software...
It will help you in configuring the Router...
But if you want to configure it manually the follow the following steps…
For DSL Connection:
http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&login=1&vw=1&app=search&articleid=2210&userrole=Linksy...
For Cable Connection:
http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&login=1&vw=1&app=search&articleid=1040&userrole=Linksy...

Wireless transfer speed is hopeless!

Hi,
New BT customer here, after being with aol for nearly 10 years I thought it was time for a change. Why-o-why?
I used to have a netgear 834g router which worked fine, signal would drop a touch upstairs and broadband 8mb with aol, but they could not offer me an all-in package, Wireless transfer speed of 54mbps with a netgear wv111v2 g adapter.
So I decided to change to BT(07/06/2010) to have it all under one roof, Total Broadband they call it, Total **** I call it.
Since the changeover my wireless transfer speed upstairs will be lucky to achieve 24mbps and the signal is shocking ranges from low to can't be bothered. So, I bought a new Belkin 'N' F5D8053v6 adapter to achieve best range and speed. No change in fact, it is worse than the old adapter, Dodgy adapter maybe? No, because I then bought the singing n' dancing Netgear N 300 mbps Wn111v2 adapter and it is still rubbish 24mbps max.
I am not a computer nerd, but I can set up a network after going through all this before, having two kids who are computer nuts sees to that.
I have changed/reinstalled everything, changed the channels; WEP, WPA-Sk; refitted old adapter, sat on top the BT hub; scoured forums, all to no avail the signal and transfer rate is still the same.
Off to India it was, to have the mis-fortune of speaking to one of the most rude, abrasive customer service personel. They would not listen to what I told them, accused me of entering the wrong password; ignored me on the phone whilst talking to someone else, done some checks remotely whilst I was still on line and said the speed was the best I could achieve, after an endless amount of time on the phone, It was the brick wall with open doorway between me and the hub 5 yards away causing the drop. All non believable.
Well I have just come off the phone and it's still the same, I have had to change the channels 5 times since to try and get a constant signal.
The BT hub say tranfer rate of 130mbps when I only have 24mbps according to my adapter, so who is lying?
My line is fine, I live less than 2 miles form exchange and if I connect through ethernet I get 6.5mb, wireless it drops to 2.5mb upload 0.4mb.
Please BT come and take this useless equipment away and I will go back to aol's basic kit. I won't hold it against you, but it is far superior in every way.

herbie9 your own post said that and I quote "I used to have a netgear 834g router which worked fine, signal would drop a touch upstairs and broadband 8mb with aol, but they could not offer me an all-in package, Wireless transfer speed of 54mbps with a netgear wv111v2 g adapter." Like Sweeney47 says use that and just configure it for BT access. Plenty of links in here to help with that. The only other answer for you will be to use a powerline adpater pair to another WAP upstairs and that will give you the signal downstairs and up. should be able to pick up a cheap WAP for under £20 and the powerline adpaters vary but I have seen them for £30 and up. Quality counts on the powerline though. Must be an enviromental issue regards wireless signal.

Wireless connection speed over Infinity 1.

Hi there, I have infinity 1 with the hub in an adjacent room to my computer, and when I do a speed test wirelessly the speed comes out at ~5mpb/s. I understand that wirelessly the speed tends to decrease a little, but why is it so low????

There are many reasons why your wireless speed could be low such as wireless interference, out dated drivers on your computer, and the construction of your property.
If you have a smart phone, download a Wifi Analyser app. It will show you the wireless channels and which one your Homehub is on. You want to find the channel with the least congestion, ie. least number of users. Once you have that you need to change your homehub onto that channel. If you can't use a Wifi Analyser select a channel and see if it improves, if not select another until you find the best one.This will also switch off "smart wireless" that can cause problems.
See link how to change channel on homehub
http://bt.custhelp.com/app/answers/detail/a_id/14094
On your computer, check that the wireless network card drivers are up to date. Use the card manufacturers website rather than Windows which can be out of date.
Make sure that "Smart set up" on the Homehub is turned off
http://bt.custhelp.com/app/answers/detail/a_id/44328/c/
Use this speed tester to check your speeds.
http://speedtest.btwholesale.com/

Event ID 1 for Intel Bluetooth Wireless High Speed after Windows Update

After the automatic update for Windows I received the following error message in the Event viewer, telling me that Intel Bluethooth Wireless High Speed has to be reinstalled after the update.
How do I reinstall Intel Bluethooth Wireless High Speed on my notebook?
Source: ApplicationExperienceInfrastructure
"Bei der Anwendung (Intel Bluethooth Wireless High Speed, von Lieferant Intel) sind folgende Probleme aufgetreten: Um eine einwandfreie Funktion zu gewhrleisten, muss Intel Bluethooth Wireless High Speed nach der Aktualisierung von Windows neu installiert werden."
+ System
- EventData
DBType 15
AppNameCount 36
AppName Intel Bluetooth Wireless High Speed
VendorNameCount 6
VendorName Intel
SummaryCount 149
Summary Um eine einwandfreie Funktion zu gewhrleisten, muss Intel Bluetooth Wireless High Speed nach der Aktualisierung von Windows neu installiert werden.
SessionID 0

Yeah, I tried it exactly as described.
I use the Satellite U940-11X (PSU6SE) which has as network adapters the Realtek PCIe FE Family Controler and the Intel Centrino Wireless Adapter N 2230. The OS platform is Windows 8, 64bit.
I first uninstalled the existing Intel Bluetooth driver, then the Intel ProSet Wireless software.
I downloaded the newest software from Intel's website which is:
- BT_2.6.1212_e64.exe, version 2.6.1212, 19-3-2013, for the Intel bluetooth software and
- Wireless_15.6.1_e64.exe, version 15.6.1, 19-3-2013, for the Intel PROSet/Wireless Software and Drivers
I have installed both software packages correctly and did not receive any error messages.
The installation seems to be faultless.
However, the bluetooth switch in PC settings (wireless tab) remains gray.
I cannot switch it from off to on.
In the device manager the bluetooth button is listed under hidden devices.
Where is the mistake?
Is it possible that my notebook requires specially modified drivers from the Toshiba website and/or additional drivers like to "bluetooth filter driver package" provided by Toshiba for my notebook model?
As to the bluetooth filter driver package it reads on the website that this driver is needed to enable bluetooth on your Atheros wlan-combo-card.
I am confused now because the notebook Satellite U940 11X (PSU6SE) doesn't have the Atheros card.
Any advice for me?
Thanks in advance
Rafu
Message was edited by: Rafu

Is Cisco ever going to address the fact the E1200 does not support Wireless-N speeds at all!

When is Cisco ever going to address despite the touted speeds on their product packaging and what they claim wherever they sell the product that the E1200 with latest or earlier firmwares do not support Wireless-N speeds and usually gets under 1Mbps which is ridiculous?
Why is Cisco still selling this inferior product if they know it doesn't work and they have not patched it?
http://homecommunity.cisco.com/t5/Wireless-Routers/E1200-very-slow-wireless/td-p/492752/page/5
http://homecommunity.cisco.com/t5/Facebook-Support/E1200-Slow-connection/td-p/466164

Extremely high volumes of connections can affect the speed of your own Internet connection. Did you already verify the connection straight to the modem? If that is working fine, then I firmly believed router is the issue here. Well there is lot of factors affecting slow speed with the router, that maybe cause by a corrupted firmware. BTW, what’s the version number of this router? If it’s already on the latest firmware, what I can suggest is to reset and reconfigure this device. You might as well disable WMM (it’s recommended for version 2 having this issue). My friend and I fix her problem with version when we disable WMM.

Wireless Download speed much slower than it should be

Wireless Download speed on Belkin N300 is only 1.5 mps and hard wired speed is 50 mps. Firmware is up to date, what else can I do?? What is the Wireless Router that Comcast recomends??

A Verizon Tech support employee helped solve the issue. Apparrently we still had the same plan when we started and were only getting 768 kbps download and were paying like $21 dollar for it. So we are going to upgrade and get the starter plan and pay $20 a month and get 1 MB download. I might even get the 3 MB download plan.

When i connect my MB Pro to external monitor, I notice the wireless internet speed decreases almost 3 time. is there a solution to this? thanks for your help in advance

When i connect my MB Pro to external monitor, I've noticed my wireless internet speed decreases almost 3 time. is there a solution to this? thanks for your help in advance

"How do I find that IP address because I put in the 192.168.1.8.."
That's not the router's IP address. Most likely it will be 192.168.1.1
System Preferences>Network>Advanced>TCP/IP should show it.

Re: Satellite L855 - max speed with newest SSD

I am looking to buy this notebook
+Message was edited: broken link has been removed+
(Croatian language, but will help)
I am wondering if there is SATA 6GB/s so I can buy newest SSD to use max speed?
thanks,
Mario

> I am wondering if there is SATA 6GB/s so I can buy newest SSD to use max speed?
I guess you are speaking about the Satellite L855 series since this model mentioned in your subject.
I dont think that Satellite L855 supports an SATA III HDD controller.
I think its SATA I, maybe SATA II
My notebook supports SATA I (1.5Gb/s) and I upgraded the unit with an SSD SATA III drive (6Gb/s). The SSD works fine but of course it does not reach the full 6Gb/s due to the HDD controller limitation.

Hub 1 max speed?

Hi,
A very quick question if I may?
What is the max speed that the version 1 of the BT Hub is capable of delivering?
Thanks,
Arnak
Solved!
Go to Solution.

Here are my home hub 1 stats. Upload speed is usually about 1.2 mb, but dropped due to some noise recently.
It will sort itself out eventually.
DSL Connection
Link Information
Uptime:
13 days, 10:20:51
Modulation:
G.992.5 annex A
Bandwidth (Up/Down) [kbps/kbps]:
846 / 12,437
Data Transferred (Sent/Received) [GB/GB]:
1.50 / 13.05
Output Power (Up/Down) [dBm]:
12.5 / 0.0
Line Attenuation (Up/Down) [dB]:
18.0 / 33.5
SN Margin (Up/Down) [dB]:
11.5 / 4.5
Vendor ID (Local/Remote):
TMMB / IFTN
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
5 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
Error Seconds (Local/Remote):
1,201 / 0
FEC Errors (Up/Down):
0 / 662,385,328
CRC Errors (Up/Down):
0 / 31,836
HEC Errors (Up/Down):
0 / 29,524
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Max speed with Auto Flip?

Hi!
I need to scan a few pdf documents at fast speed as part of my work. I set the Auto Flip speed to 0.02 seconds in page transitions. Is this speed too fast for a 60Hz monitor? Will Acrobat be able to display all pages at this speed or will it miss some pages out? Also, is there a drop in quality this way or will all the images and text be catched and displayed in full quality at 0.02sec autoflip speed?

> I am wondering if there is SATA 6GB/s so I can buy newest SSD to use max speed?
I guess you are speaking about the Satellite L855 series since this model mentioned in your subject.
I dont think that Satellite L855 supports an SATA III HDD controller.
I think its SATA I, maybe SATA II
My notebook supports SATA I (1.5Gb/s) and I upgraded the unit with an SSD SATA III drive (6Gb/s). The SSD works fine but of course it does not reach the full 6Gb/s due to the HDD controller limitation.

Max. speed WRT150N

Hello, I was wondering what the actual maximum speed of the WRT150N is when using wireless. Some say it's 130, 150, 270 or 300, but what is it really? There are also no indications of it on both the Linksys website and other websites. Can someone please tell me how fast this router is? Thanks in advance, Jeffrey

The "wireless connection speed" of wireless n routers, when connected to wireless n adapters, usually will have a maximum of 200 to 300 Mbps. Like all connection speeds, it will decrease with distance and obstacles.
However, this is not the same thing as the "wireless data transfer speed". The reports that I have seen so far show "wireless data tranfer speed" (for wireless n router to wireless n adapter) to be in the range of 20 to 70 Mbps. Perhaps this will improve in the future.
If you use a wireless n router with a wireless g adapter, you will get wireless g speeds which is connection of 54 Mbps, and data transfer of 10 to 27 Mbps.
Note that the data transfer speeds I mentioned above are those found under good or very good conditions. Like all data transfer speeds, it will decrease with distance, obstacles, and interference from other 2.4 GHz devices.

Max speed support on serial 2503

Hi All,
I have a router cisco 2503, I need to know what is Max. speed supported on serial interface? Presently we have 128KB leased line, and want to know weather I can upgrade the leased line to 256K with the same router ?
THanks,
A.S

Hello,
if you are referring to the two serial interfaces on your 2503, these are high-speed serial interfaces, which support speeds up to 2048kbps, or roughly 2MB.
Check this link for more details:
Cisco 2503 Router
http://www.manucomp.com/cisco_catalogue/cisco_2503_router.html
HTH,
GP

Wireless max speed?

Similar Messages

Maybe you are looking for